Date sent: Tue, 22 Aug 2000 15:40:46 +1000 To: ascend-users at bungi.com From: Roddy Strachan <roddy at satlink.com.au> Subject: (ASCEND) Disconnect codes? > Hi, > I remember a webpage out there that had a list of the Disconnect Causes > for Radius, am having a lot of dropouts and would like to know what they > mean, anyone be of help it would be appreciated. Table 3-2. Ascend disconnect-cause codes Code Description 1 This value is not applied to any call. 2 The disconnect occurred for an unknown reason. 3 The call was disconnected. 4 CLID authentication failed. 5 A RADIUS timeout occurred during authentication. 6 Authentication was successful. The Ascend unit is configured to call back the user. 7 The Pre-T310 Send Disc timer was triggered. 9 No modem is available to accept the call. 10 The modem never detected Data Carrier Detect (DCD). 11 The modem detected DCD, but the modem carrier was lost. 12 The Ascend unit failed to successfully detect modem result codes. 13 The Ascend unit failed to open a modem for an outgoing call. 14 The Ascend unit failed to open a modem for outgoing call while the ModemDiag diagnostic command was enabled. 20 The user exited normally from the terminal server. 21 The terminal server timed out waiting for user input. 22 A forced disconnect occurred when the user exited a Telnet session. 23 No IP address was available when the user entered the PPP or SLIP command. 24 A forced disconnect occurred when the user exited a raw TCP session. 25 The user exceeded the limit for login attempts. 26 The Ascend unit attempted to start a raw TCP session, but raw TCP is disabled. 27 Control-C characters were received during the login. 28 The terminal-server session cleared ungracefully. 29 The user closed a terminal-server virtual connection normally. 30 The terminal-server virtual connection cleared ungracefully. 31 The user exited from an Rlogin session. 32 The establishment of the Rlogin session failed because of bad options. 33 The Ascend unit lacks the resources to process a terminal-server request. 35 The MP+ session cleared because no null MP packets were received. An Ascend unit sends (and should receive) null MP packets throughout an MP+ session. 40 LCP timed out waiting for a response. 41 LCP negotiations failed, probably because the user is configured to send passwords by means of PAP, and the Ascend unit is configured to accept passwords by means of CHAP (or vice versa). 42 PAP authentication failed. 43 CHAP authentication failed. 44 Authentication failed from a remote server. 45 The Ascend unit received a Terminate Request packet while LCP was in an open state. 46 The Ascend unit received a Close Request from an upper layer, indicating graceful LCP closure. 47 The Ascend unit cleared the call because no PPP Network Core Protocols (NCPs) were successfully negotiated. Typically, there is no agreement on the type of routing or bridging that is supported for the session. 48 An MP session was disconnected. The Ascend unit accepted an added channel, but cannot determine to which call to add the new channel. 49 The Ascend unit disconnected an MP call because no more channels could be added. 50 Telnet or raw TCP session tables are full. 51 The Ascend unit has exhausted Telnet or raw TCP resources. 52 For a Telnet or raw TCP session, the IP address is invalid. 53 The Ascend unit cannot resolve the host name for a Telnet or raw TCP session. 54 For a Telnet or raw TCP session, the Ascend unit received a bad or missing port number. 60 For a Telnet or raw TCP session, the host was reset. 61 For a Telnet or raw TCP session, the connection was refused. 62 For a Telnet or raw TCP session, the connection timed out. 63 For a Telnet or raw TCP session, the connection was closed by a foreign host. 64 For a Telnet or raw TCP session, the network was unreachable. 65 For a Telnet or raw TCP session, the host was unreachable. 66 For a Telnet or raw TCP session, the network admin was unreachable. 67 For a Telnet or raw TCP session, the host admin was unreachable. 68 For a Telnet or raw TCP session, the port was unreachable. 100 The session timed out. 101 The user name was invalid. 102 Callback is enabled. 115 The dial-in user is no longer active. 120 A requested protocol is disabled or unsupported. 150 A disconnect was requested by the RADIUS server. 151 The call was disconnected by the local administrator. 152 The call was disconnected by means of SNMP. 160 The unit exceeded the maximum number of V.110 retries. 170 A timeout occurred while the Ascend unit waited for the remote device to be authenticated. 180 The user disconnected the call. 181 The call was cleared by the system. 185 The signal was lost from remote end, probably because the remote end’s modem was turned off. 190 The resource has been quiesced. 195 The maximum duration for the call has been reached. 201 The Ascend unit has low memory. 210 The modem card stopped working because it had calls outstanding. 220 The Ascend unit requires CBCP, but client does not support it. 230 The Ascend unit deleted the Virtual Router (VRouter). 240 The Ascend unit disconnected the call on the basis of LQM measurements. 241 The Ascend unit cleared a backup call. Regards H.Schroeder Hartmut Schroeder MMS Communication AG mailto:hacko at mms.de Eiffestrasse 598 http://www.mms.de/~hacko 20537 Hamburg, Germany Phone: +49 40 211105-40 Fax: +49 40 210 32 210 UTM 32U0569835 5934083 WGS84 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com To get FAQ'd: <http://www.nealis.net/ascend/faq>