We've got exactly the same problem. Didn't know what to make out of it until your message. We're in Holland but using the init string with the dutch code doesn't work. Not using ISDN right now so I guess we're on our way back to 7.0.x. Greetz, Edwin Ringersma Op Wed, 30 Aug 2000 12:01:34 -0500 , schreef Edwin_Everett at cargill.com : >I have run into the Xircom issue as well, but Ascend TAC had no record >of a problem when I called...no time to fool with it till now. Looking >at the NAvisAccess 5.X release documentation though and its forcing the >upgrade to 8.X....woa is me.,.... > >e > >-----Original Message----- >From: patrick.horsmans at hvea.healthnet.lu >[mailto:patrick.horsmans at hvea.healthnet.lu] >Sent: Wednesday, August 30, 2000 9:57 AM >To: ascend-users at bungi.com >Cc: patrick.horsmans at hvea.healthnet.lu; carlo.sauber at telephonie.lu >Subject: FW: (ASCEND) Max 800 analog modem no longer working after 7.03 >to 8.02 upgrade > > >Hi again. >Last week I wrote to this list and asked if anyone nows about an >international version for the max 800 because ISDN switch types for >Europe where missing. I contacted my supplier which handed me out a >second max 800 >that had a 8.0.2 installed. > >This version has a switch type NET3 and finally ISDN callback works >fine. >I tried to install the 8.02 version (b.m8) from the ascend ftp site to >the max 800 with the 7.0.3 version, but again the switch types are >missing. > >So I guess there must be an international version for the max 800. >But where can I find it? > > >NOW THE ACTUAL PROBLEM. >With the 8.0.2 international version, the ISDN cards work, but the >analog >modems (Xircom Credit Card Modem 56, global access) no longer work. > >I found in the documentation that if you are using the international >version, the Max800 and Max200plus do not recognize the modem correctly. >You have to set the right init string for the modem (can no longer use >default). > >The following init string comes from this documentation. >AT&F+GCI=xxW2E0\N4S95=47S0=1 >The xx must be replaced with a country code, but Luxembourg is not in >the list. > >I tried all neighboring countries, but none works. However with the >7.0.3 release (non international), the modems work fine. > >Can anyone give me a hint please, I'm going crazy with this ascend >stuff. > >Thank you very much in advance > > >Patrick Hormans >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request at bungi.com >To get FAQ'd: <http://www.nealis.net/ascend/faq> > >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request at bungi.com >To get FAQ'd: <http://www.nealis.net/ascend/faq> > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com To get FAQ'd: <http://www.nealis.net/ascend/faq>