Hello I have found the setting to stop LAN Security error. Use an extra Radius setting to adjust it on a per user basis, or adjust the IP-Global setting to Shared-Prof=yes to adjust it globally. Ascend-Shared-Profile-Enable (128) Description: Specifies whether multiple incoming callers can share a single RADIUS user profile. Usage: Specify one of the following settings: Shared-Profile-No (0) specifies that multiple incoming callers cannot share the RADIUS user profile. Shared-Profile-No is the default. Shared-Profile-Yes (1) specifies that multiple incoming callers can share the RADIUS user profile. Dependencies: For the Ascend-Shared-Profile-Enable attribute to apply, you must set Shared-Prof=No in the IP-Global profile to disable shared profiles for the MAX TNT. Cheers James ----- Original Message ----- From: "Bill Merrill" <wyrm at shore.net> To: <ascend-users at max.bungi.com> Sent: Tuesday, July 25, 2000 6:26 PM Subject: (ASCEND) Multiple connections using same username > Hello once again. I am hoping someone will be able to help. We have users > that can get a dynamically assigned IP address, and hence can use the same > username to connect with multiple computers. We keep track of usage, so > that is not a problem. The problem lies in that since switching over to > the TNT, multiple connections with the same username are no longer > possible. The Livingston Portmasters do it without a problem. I am > including some info to maybe help describe the issue: > > Model: MaxTNT-2AC > Rev: 7.2.3 > Radius: Merit > > Jul 25 10:29:24 cmbr1-tnt.wharf.shore.net 1/9: [1/9/1/0] > STOP: 'nqrdial at shore.net'; cause 101.; progress 67.; host 209.192.186.231 > [MBID 1094; ->1980] [nqrdial at shore.net] > Jul 25 10:30:02 cmbr1-tnt.wharf.shore.net 1/9: [1/9/38/0] LAN security ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com To get FAQ'd: <http://www.nealis.net/ascend/faq>