Yes, but if you don't have the Framed-Netmask, you get a problem that's pretty close to his :) -----Original Message----- From: James Courtier-Dutton <jcdutton at lucent.com> To: Stassi <stanislav_galabov at smartcom.bg>; ascend-users at max.bungi.com <ascend-users at max.bungi.com> Date: Friday, July 28, 2000 5:29 PM Subject: Re: (ASCEND) MAX 1800 ip routing problem >For the MAX to assign IP addresses, the >Framed-IP-Address=255.255.255.254 > >----- Original Message ----- >From: "Stassi" <stanislav_galabov at smartcom.bg> >To: <ascend-users at max.bungi.com> >Sent: Friday, July 28, 2000 7:43 AM >Subject: Re: (ASCEND) MAX 1800 ip routing problem > > >> That's because you haven't probably configured >> Framed-Netmask=255.255.255.255 in your RADIUS profiles. >> Try adding this. >> >> Hope that helps. >> >> ---------------------------- >> Regards, >> Stanislav Galabov, >> Senior Network Support Engineer, LCTE >> Haemimont-SmartCom AD >> Sofia, Bulgaria >> >> > >> >From: "Eelco Cramer" <eelco at xs4all.nl> >> >Date: Thu, 27 Jul 2000 11:02:10 +0100 >> >Subject: Re: (ASCEND) MAX 1800 ip routing problem >> > >> >Ok, here are the routing tables on the different moments: >> > >> >no devices connected: >> > >> >ascend% iproute show >> > >> >Destination Gateway IF Flg Pref Met Use >Age >> >0.0.0.0/0 195.43.39.97 ie0 SGP 60 1 2154 >557 >> >127.0.0.0/8 - bh0 CP 0 0 0 >557 >> >127.0.0.1/32 - local CP 0 0 0 >557 >> >127.0.0.2/32 - rj0 CP 0 0 0 >557 >> >195.43.39.96/27 - ie0 C 0 0 1593 >557 >> >195.43.39.114/32 - local CP 0 0 774 >557 >> >224.0.0.0/4 - mcast CP 0 0 0 >557 >> >224.0.0.1/32 - local CP 0 0 0 >557 >> >224.0.0.2/32 - local CP 0 0 0 >557 >> >224.0.0.5/32 - bh0 CP 0 0 0 >558 >> >224.0.0.6/32 - bh0 CP 0 0 0 >558 >> >224.0.0.9/32 - local CP 0 0 0 >558 >> >255.255.255.255/32 - ie0 CP 0 0 86 >558 >> > >> >- --- >> > >> >WAP phone connected and MAX assigns the IP from its pool: >> > >> >ascend% iproute show >> > >> >Destination Gateway IF Flg Pref Met Use >Age >> >0.0.0.0/0 195.43.39.97 ie0 SGP 60 1 798 >318 >> >127.0.0.0/8 - bh0 CP 0 0 0 >318 >> >127.0.0.1/32 - local CP 0 0 0 >318 >> >127.0.0.2/32 - rj0 CP 0 0 0 >318 >> >195.43.39.96/27 - ie0 C 0 0 723 >318 >> >195.43.39.105/32 195.43.39.105 wan0 rT 60 1 7 >5 >> >195.43.39.114/32 - local CP 0 0 290 >318 >> >224.0.0.0/4 - mcast CP 0 0 0 >318 >> >224.0.0.1/32 - local CP 0 0 0 >319 >> >224.0.0.2/32 - local CP 0 0 0 >319 >> >224.0.0.5/32 - bh0 CP 0 0 0 >319 >> >224.0.0.6/32 - bh0 CP 0 0 0 >319 >> >224.0.0.9/32 - local CP 0 0 0 >319 >> >255.255.255.255/32 - ie0 CP 0 0 49 >319 >> > >> >- --- >> > >> >WAP phone connected and RADIUS server assigns the IP: >> > >> >ascend% iproute show >> > >> >Destination Gateway IF Flg Pref Met Use >Age >> >0.0.0.0/0 195.43.39.97 ie0 SGP 60 1 2038 >527 >> >127.0.0.0/8 - bh0 CP 0 0 0 >527 >> >127.0.0.1/32 - local CP 0 0 0 >528 >> >127.0.0.2/32 - rj0 CP 0 0 0 >528 >> >195.43.39.96/27 - ie0 C 0 0 1517 >528 >> >195.43.39.114/32 - local CP 0 0 738 >528 >> >224.0.0.0/4 - mcast CP 0 0 0 >528 >> >224.0.0.1/32 - local CP 0 0 0 >528 >> >224.0.0.2/32 - local CP 0 0 0 >528 >> >224.0.0.5/32 - bh0 CP 0 0 0 >528 >> >224.0.0.6/32 - bh0 CP 0 0 0 >528 >> >224.0.0.9/32 - local CP 0 0 0 >528 >> >255.255.255.255/32 - ie0 CP 0 0 83 >528 >> > >> >- --- >> > >> >If the RADIUS servers assigns the IP address (via the MAX) the MAX >doesn't >> >add a route to the WAP phone in its routing table, why? >> > >> >Regards, >> > >> >Eelco Cramer >> > >> >> >> >> ++ Ascend Users Mailing List ++ >> To unsubscribe: send unsubscribe to ascend-users-request at bungi.com >> To get FAQ'd: <http://www.nealis.net/ascend/faq> > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com To get FAQ'd: <http://www.nealis.net/ascend/faq>