From Majordomo at bungi.com Sun Jun 25 17:06:24 2000 From: Majordomo at bungi.com (Majordomo@bungi.com) Date: Tue Jan 18 13:58:27 2005 Subject: [Ascend] Welcome to ascend-users Message-ID: <200006252206.PAA20912@max.bungi.com> -- Welcome to the ascend-users mailing list! If you ever want to remove yourself from this mailing list, send the following command in email to "ascend-users-request": unsubscribe Or you can send mail to "Majordomo@bungi.com" with the following command in the body of your email message: unsubscribe ascend-users rte-ascend@lists.real-time.com Here's the general information for the list you've subscribed to, in case you don't already have it: This is the ASCEND-USERS mailing list. The list is open to any and all people with an interest in Ascend products. Submissions should be sent to Note: If mail to you bounces "too many times" you will be automatically removed from the list. If in doubt, re-subscribe. If you're already on the list from the same email address the second subscription will be rejected as a duplicate. "Too many times" depends upon my state of mind, but is typically about 5 days worth of bounces. UNSUBSCRIPTION REMINDER: * To unsubscribe from the regular list send "unsubscribe" in the *body* of the message to ascend-users-request@bungi.com * To unsubscribe from the digest version of the list send "unsubscribe" in the *body* of the message to ascend-users-digest-request@bungi.com The archive version of the mailing list (ascend-users-digest) is archived. You can get copies of old digests from the mail server. To get a list of available files send a message to ascend-users-request@bungi.com with the command "index" in the body of the message. In UNIX speak: echo index | mail ascend-users-request@bungi.com To retrieve one of the files use the command "get " in the body of the message. Send it to the same request address as above, e.g. echo get v01.n049 | mail ascend-users-request@bungi.com The list is maintained by Dave Rand . From Majordomo at bungi.com Sun Jun 25 17:06:24 2000 From: Majordomo at bungi.com (Majordomo@bungi.com) Date: Tue Jan 18 13:58:27 2005 Subject: [Ascend] Majordomo results Message-ID: <200006252206.PAA20911@max.bungi.com> -- >>>> subscribe Succeeded. Received: from conjurer.real-time.com (IDENT:qmailr@conjurer.real-time.com [206.10.253.11]) by sprite.real-time.com (8.10.2/8.10.2) with SMTP id e5Q5us306500 for ; Mon, 26 Jun 2000 00:56:54 -0500 Received: (qmail 19191 invoked by uid 4001); 26 Jun 2000 05:42:22 -0000 Mailing-List: contact rte-ascend-help@listserv.real-time.com; run by ezmlm Precedence: bulk X-No-Archive: yes list-help: list-unsubscribe: list-post: list-archives: list-website: Reply-To: ascend-users@max.bungi.com Delivered-To: mailing list rte-ascend@listserv.real-time.com Received: (qmail 19183 invoked from network); 26 Jun 2000 05:42:21 -0000 X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Message-Id: <4.2.0.58.20000626144106.00c45ae0@vines.webfront.net.au> X-Sender: bargi@vines.webfront.net.au X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.58 Date: Mon, 26 Jun 2000 15:08:26 +1000 To: ascend-users@bungi.com From: Raymond Brighenti Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Subject: [Ascend] (ASCEND) Disconnects Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List Hi, I've noticed that we get failed connections with the following characteristics from the syslog, when I see something like this I just get them to go into the Network Settings in the Control Panel and Disable WINS which 99% of the time works. I'm not sure if it's the fact you have to reboot which fixes it or actually changes something to make it work. But this time this person also has a connection to OzEmail which was dialing in fine. Does anyone know of a reason why this happens, is it worth upgrading the TAOS? (Max6000 7.2.3) Jun 26 144048 max01 ASCEND slot 0 port 0, line 1, channel 32, Incoming Call,26964xxxx [MBID 358; 26964xxxx->6962yyyy] Jun 26 144048 max01 ASCEND slot 6 port 7, Assigned to port, 26964xxxx [MBID 358; 26964xxxx->6962yyyy] Jun 26 144050 max01 ASCEND slot 6 port 7, line 1, channel 32, Call Connected, 26964xxxx [MBID 358; 26964xxxx->6962yyyy] Jun 26 144107 max01 ASCEND slot 6 port 7, line 1, channel 32, Call Disconnected [MBID 358; 26964xxxx->6962yyyy] Jun 26 144107 max01 ASCEND slot 6 port 7, Call Terminated [MBID 358; 26964xxxx->6962yyyy] Jun 26 144149 max01 ASCEND slot 0 port 0, line 2, channel 28, Incoming Call,26964xxxx [MBID 361; 26964xxxx->6962yyyy] Jun 26 144149 max01 ASCEND slot 3 port 3, Assigned to port, 26964xxxx [MBID 361; 26964xxxx->6962yyyy] Jun 26 144151 max01 ASCEND slot 3 port 3, line 2, channel 28, Call Connected, 26964xxxx [MBID 361; 26964xxxx->6962yyyy] Jun 26 144208 max01 ASCEND slot 3 port 3, line 2, channel 28, Call Disconnected [MBID 361; 26964xxxx->6962yyyy] Jun 26 144208 max01 ASCEND slot 3 port 3, Call Terminated [MBID 361; 26964xxxx->6962yyyy] Thanks Ray ============================================ "In cases of major discrepancy it's always reality that's got it wrong....reality is frequently inaccurate." ============================================ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com Received: from max.bungi.com (max.bungi.com [207.126.97.7]) by sprite.real-time.com (8.10.2/8.10.2) with ESMTP id e5Q6Ur306590 for ; Mon, 26 Jun 2000 01:30:53 -0500 Received: by max.bungi.com (8.9.1/8.8.7) id WAA21775 for ascend-users-outgoing; Sun, 25 Jun 2000 22:07:03 -0700 (PDT) X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Received: from daver.bungi.com (daver.bungi.com [207.126.97.2]) by max.bungi.com (8.9.1/8.8.7) with ESMTP id WAA21770 for ; Sun, 25 Jun 2000 22:07:01 -0700 (PDT) Received: from vines.webfront.net.au(really [203.23.200.12]) by daver.bungi.com via sendmail with esmtp id for ; Sun, 25 Jun 2000 22:06:58 -0700 (PDT) (Smail-3.2.0.94 1997-Apr-22 #298 built 2000-Jun-25) Received: from bargi (bargi.webfront.net.au [203.23.200.29]) by vines.webfront.net.au (8.9.3/8.9.3) with ESMTP id PAA32506 for ; Mon, 26 Jun 2000 15:18:52 +1000 (EST) Message-Id: <4.2.0.58.20000626144106.00c45ae0@vines.webfront.net.au> X-Sender: bargi@vines.webfront.net.au X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.58 Date: Mon, 26 Jun 2000 15:08:26 +1000 To: ascend-users@bungi.com From: Raymond Brighenti Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Precedence: bulk Subject: [Ascend] (ASCEND) Disconnects Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List Hi, I've noticed that we get failed connections with the following characteristics from the syslog, when I see something like this I just get them to go into the Network Settings in the Control Panel and Disable WINS which 99% of the time works. I'm not sure if it's the fact you have to reboot which fixes it or actually changes something to make it work. But this time this person also has a connection to OzEmail which was dialing in fine. Does anyone know of a reason why this happens, is it worth upgrading the TAOS? (Max6000 7.2.3) Jun 26 144048 max01 ASCEND slot 0 port 0, line 1, channel 32, Incoming Call,26964xxxx [MBID 358; 26964xxxx->6962yyyy] Jun 26 144048 max01 ASCEND slot 6 port 7, Assigned to port, 26964xxxx [MBID 358; 26964xxxx->6962yyyy] Jun 26 144050 max01 ASCEND slot 6 port 7, line 1, channel 32, Call Connected, 26964xxxx [MBID 358; 26964xxxx->6962yyyy] Jun 26 144107 max01 ASCEND slot 6 port 7, line 1, channel 32, Call Disconnected [MBID 358; 26964xxxx->6962yyyy] Jun 26 144107 max01 ASCEND slot 6 port 7, Call Terminated [MBID 358; 26964xxxx->6962yyyy] Jun 26 144149 max01 ASCEND slot 0 port 0, line 2, channel 28, Incoming Call,26964xxxx [MBID 361; 26964xxxx->6962yyyy] Jun 26 144149 max01 ASCEND slot 3 port 3, Assigned to port, 26964xxxx [MBID 361; 26964xxxx->6962yyyy] Jun 26 144151 max01 ASCEND slot 3 port 3, line 2, channel 28, Call Connected, 26964xxxx [MBID 361; 26964xxxx->6962yyyy] Jun 26 144208 max01 ASCEND slot 3 port 3, line 2, channel 28, Call Disconnected [MBID 361; 26964xxxx->6962yyyy] Jun 26 144208 max01 ASCEND slot 3 port 3, Call Terminated [MBID 361; 26964xxxx->6962yyyy] Thanks Ray ============================================ "In cases of major discrepancy it's always reality that's got it wrong....reality is frequently inaccurate." ============================================ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: Received: from conjurer.real-time.com (IDENT:qmailr@conjurer.real-time.com [206.10.253.11]) by sprite.real-time.com (8.10.2/8.10.2) with SMTP id e5QMQhG13251 for ; Mon, 26 Jun 2000 17:26:43 -0500 Received: (qmail 1693 invoked by uid 4001); 26 Jun 2000 22:12:12 -0000 Mailing-List: contact rte-ascend-help@listserv.real-time.com; run by ezmlm Precedence: bulk X-No-Archive: yes list-help: list-unsubscribe: list-post: list-archives: list-website: Reply-To: ascend-users@max.bungi.com Delivered-To: mailing list rte-ascend@listserv.real-time.com Received: (qmail 1685 invoked from network); 26 Jun 2000 22:12:11 -0000 X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Message-ID: <035301bfdfb7$2eeb1230$144e3ad1@jahil> From: "Ahsan Khan" To: Cc: , "Multi-Tech Systems $Pvt$ Ltd" References: <4.2.0.58.20000626144106.00c45ae0@vines.webfront.net.au> Date: Tue, 27 Jun 2000 02:40:41 +0500 Organization: Sun Communication Pvt. MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4029.2901 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4029.2901 Subject: [Ascend] (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List Dear Fellows, I have a strange problem in My MaxTnT. Normally its works fine but some time its just stop responding there is no way to enter in it except consol and the dialup connection through which you are connected. I have look a lot and find that its 100MB slot stop responding where as everything is fine. fsck is fine fatal command gave no error software is checked ok and reload many times. is there DOS or any denial of service known for MaxTnT which make stop responding it Ethernet port as when we change to the normal 10MB port which comes in Controller card its starts work fine. and if you shift back the things to 100MB after some times its ok again. Its really very confusing. any help will be appreciated. With Regards Ahsan Khan Sr. System Admin Internet Division (OneNet) Sun Communication Pvt. Ltd. Pakistan http://www.one.net.pk ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com Received: from max.bungi.com (max.bungi.com [207.126.97.7]) by sprite.real-time.com (8.10.2/8.10.2) with ESMTP id e5QNkgG13677 for ; Mon, 26 Jun 2000 18:46:43 -0500 Received: by max.bungi.com (8.9.1/8.8.7) id PAA26889 for ascend-users-outgoing; Mon, 26 Jun 2000 15:44:49 -0700 (PDT) X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Received: from daver.bungi.com (daver.bungi.com [207.126.97.2]) by max.bungi.com (8.9.1/8.8.7) with ESMTP id PAA26884 for ; Mon, 26 Jun 2000 15:44:48 -0700 (PDT) Received: from buffnet4.buffnet.net(really [205.246.19.13]) by daver.bungi.com via sendmail with esmtp id for ; Mon, 26 Jun 2000 15:44:36 -0700 (PDT) (Smail-3.2.0.94 1997-Apr-22 #299 built 2000-Jun-26) Received: from buffnet11.buffnet.net (buffnet11.buffnet.net [205.246.19.55]) by buffnet4.buffnet.net (8.9.3/8.8.7) with ESMTP id SAA87420; Mon, 26 Jun 2000 18:43:34 -0400 (EDT) (envelope-from shovey@buffnet.net) Date: Mon, 26 Jun 2000 18:43:22 -0400 (EDT) From: Steve Hovey To: Ahsan Khan cc: ascend-users@bungi.com, sabour@mail.one.net.pk, "Multi-Tech Systems (Pvt) Ltd" In-Reply-To: <035301bfdfb7$2eeb1230$144e3ad1@jahil> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Precedence: bulk Subject: [Ascend] Re: (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List This sounds like a need for that dongle jobby On Tue, 27 Jun 2000, Ahsan Khan wrote: > Dear Fellows, > > I have a strange problem in My MaxTnT. Normally its works fine but > some time its just stop responding there is no way to enter in it except > consol and the dialup connection through which you are connected. I have > look a lot and find that its 100MB slot stop responding where as everything > is fine. > > fsck is fine > > fatal command gave no error > > software is checked ok and reload many times. > > > is there DOS or any denial of service known for MaxTnT which make stop > responding it Ethernet port as when we change to the normal 10MB port which > comes in Controller card its starts work fine. and if you shift back the > things to 100MB after some times its ok again. > > > Its really very confusing. any help will be appreciated. > > > > With Regards > Ahsan Khan > Sr. System Admin > Internet Division (OneNet) > Sun Communication Pvt. Ltd. > Pakistan > http://www.one.net.pk > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: Received: from conjurer.real-time.com (IDENT:qmailr@conjurer.real-time.com [206.10.253.11]) by sprite.real-time.com (8.10.2/8.10.2) with SMTP id e5QNRrG13573 for ; Mon, 26 Jun 2000 18:27:53 -0500 Received: (qmail 3986 invoked by uid 4001); 26 Jun 2000 23:13:22 -0000 Mailing-List: contact rte-ascend-help@listserv.real-time.com; run by ezmlm Precedence: bulk X-No-Archive: yes list-help: list-unsubscribe: list-post: list-archives: list-website: Reply-To: ascend-users@max.bungi.com Delivered-To: mailing list rte-ascend@listserv.real-time.com Received: (qmail 3978 invoked from network); 26 Jun 2000 23:13:19 -0000 X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Date: Mon, 26 Jun 2000 18:43:22 -0400 (EDT) From: Steve Hovey To: Ahsan Khan cc: ascend-users@bungi.com, sabour@mail.one.net.pk, "Multi-Tech Systems (Pvt) Ltd" In-Reply-To: <035301bfdfb7$2eeb1230$144e3ad1@jahil> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Subject: [Ascend] Re: (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List This sounds like a need for that dongle jobby On Tue, 27 Jun 2000, Ahsan Khan wrote: > Dear Fellows, > > I have a strange problem in My MaxTnT. Normally its works fine but > some time its just stop responding there is no way to enter in it except > consol and the dialup connection through which you are connected. I have > look a lot and find that its 100MB slot stop responding where as everything > is fine. > > fsck is fine > > fatal command gave no error > > software is checked ok and reload many times. > > > is there DOS or any denial of service known for MaxTnT which make stop > responding it Ethernet port as when we change to the normal 10MB port which > comes in Controller card its starts work fine. and if you shift back the > things to 100MB after some times its ok again. > > > Its really very confusing. any help will be appreciated. > > > > With Regards > Ahsan Khan > Sr. System Admin > Internet Division (OneNet) > Sun Communication Pvt. Ltd. > Pakistan > http://www.one.net.pk > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com Received: from max.bungi.com (max.bungi.com [207.126.97.7]) by sprite.real-time.com (8.10.2/8.10.2) with ESMTP id e5QMt2G13347 for ; Mon, 26 Jun 2000 17:55:02 -0500 Received: by max.bungi.com (8.9.1/8.8.7) id OAA26585 for ascend-users-outgoing; Mon, 26 Jun 2000 14:33:32 -0700 (PDT) X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Received: from daver.bungi.com (daver.bungi.com [207.126.97.2]) by max.bungi.com (8.9.1/8.8.7) with ESMTP id OAA26580 for ; Mon, 26 Jun 2000 14:33:30 -0700 (PDT) Received: from mail.one.net.pk(really [209.58.78.10]) by daver.bungi.com via sendmail with esmtp id for ; Mon, 26 Jun 2000 14:32:58 -0700 (PDT) (Smail-3.2.0.94 1997-Apr-22 #299 built 2000-Jun-26) Received: from jahil (ISDN-Dialup-20.One.Net.pk [209.58.78.20]) by mail.one.net.pk (8.9.3/8.8.7) with SMTP id CAA28784; Tue, 27 Jun 2000 02:40:57 -0500 Message-ID: <035301bfdfb7$2eeb1230$144e3ad1@jahil> Reply-To: "Ahsan Khan" From: "Ahsan Khan" To: Cc: , "Multi-Tech Systems $Pvt$ Ltd" References: <4.2.0.58.20000626144106.00c45ae0@vines.webfront.net.au> Date: Tue, 27 Jun 2000 02:40:41 +0500 Organization: Sun Communication Pvt. MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4029.2901 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4029.2901 Precedence: bulk Subject: [Ascend] (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List Dear Fellows, I have a strange problem in My MaxTnT. Normally its works fine but some time its just stop responding there is no way to enter in it except consol and the dialup connection through which you are connected. I have look a lot and find that its 100MB slot stop responding where as everything is fine. fsck is fine fatal command gave no error software is checked ok and reload many times. is there DOS or any denial of service known for MaxTnT which make stop responding it Ethernet port as when we change to the normal 10MB port which comes in Controller card its starts work fine. and if you shift back the things to 100MB after some times its ok again. Its really very confusing. any help will be appreciated. With Regards Ahsan Khan Sr. System Admin Internet Division (OneNet) Sun Communication Pvt. Ltd. Pakistan http://www.one.net.pk ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: Received: from max.bungi.com (max.bungi.com [207.126.97.7]) by sprite.real-time.com (8.10.2/8.10.2) with ESMTP id e5RDtom17507 for ; Tue, 27 Jun 2000 08:55:51 -0500 Received: by max.bungi.com (8.9.1/8.8.7) id FAA01393 for ascend-users-outgoing; Tue, 27 Jun 2000 05:04:11 -0700 (PDT) X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Received: from james.encomix.es (qmailr@james.encomix.es [194.143.192.49]) by max.bungi.com (8.9.1/8.8.7) with SMTP id FAA01388 for ; Tue, 27 Jun 2000 05:04:10 -0700 (PDT) Received: (qmail 30281 invoked by uid 507); 27 Jun 2000 12:03:38 -0000 Date: Tue, 27 Jun 2000 14:03:38 +0200 From: Jonathan Ruano To: Ascend Users ML Message-ID: <20000627140338.B26604@james.encomix.es> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i Precedence: bulk Subject: [Ascend] (ASCEND) Far End Hung Up Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List Hello.. Tried searching for info in our manuals (and several PDFs), but no luck. We have a TNT (TAOS 7.2.3), with an 8e1-card with 6 PRIs connected. Everything works fine, but sometimes I get these errors: Jun 27 13:35:57 TNT 1/17: [1/1/5/20] Call rejected, no ports available, [voice] -> [MBID 1046; ->] Jun 27 13:35:57 TNT 1/1: [1/1/5/20] Far End Hung Up Reported as problem to local Telco, but everything seemed ok. The PRIs are at about 60% of use when I see that, but I cant be sure this happens because of that. (There aint more concurrency normally). There are modems available, this happens equally with ISDN and analog connections. Hoped someone could just say "I know what's happening", or could give me a clue. Tried with netif debug command, but it seems so low-level debug, as I was seeing assembly and tried to debug a C program :) Thanks for your time. Jonathan. -- Jonathan Ruano Pach Email: ICQ:1252101 AIM:Tlabok IRC:Kobalt Homepage: http://www.pobox.com/~kobalt/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: Received: from conjurer.real-time.com (IDENT:qmailr@conjurer.real-time.com [206.10.253.11]) by sprite.real-time.com (8.10.2/8.10.2) with SMTP id e5RD70m17281 for ; Tue, 27 Jun 2000 08:07:00 -0500 Received: (qmail 14234 invoked by uid 4001); 27 Jun 2000 12:52:29 -0000 Mailing-List: contact rte-ascend-help@listserv.real-time.com; run by ezmlm Precedence: bulk X-No-Archive: yes list-help: list-unsubscribe: list-post: list-archives: list-website: Reply-To: ascend-users@max.bungi.com Delivered-To: mailing list rte-ascend@listserv.real-time.com Received: (qmail 14225 invoked from network); 27 Jun 2000 12:52:26 -0000 X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Date: Tue, 27 Jun 2000 14:03:38 +0200 From: Jonathan Ruano To: Ascend Users ML Message-ID: <20000627140338.B26604@james.encomix.es> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i Subject: [Ascend] (ASCEND) Far End Hung Up Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List Hello.. Tried searching for info in our manuals (and several PDFs), but no luck. We have a TNT (TAOS 7.2.3), with an 8e1-card with 6 PRIs connected. Everything works fine, but sometimes I get these errors: Jun 27 13:35:57 TNT 1/17: [1/1/5/20] Call rejected, no ports available, [voice] -> [MBID 1046; ->] Jun 27 13:35:57 TNT 1/1: [1/1/5/20] Far End Hung Up Reported as problem to local Telco, but everything seemed ok. The PRIs are at about 60% of use when I see that, but I cant be sure this happens because of that. (There aint more concurrency normally). There are modems available, this happens equally with ISDN and analog connections. Hoped someone could just say "I know what's happening", or could give me a clue. Tried with netif debug command, but it seems so low-level debug, as I was seeing assembly and tried to debug a C program :) Thanks for your time. Jonathan. -- Jonathan Ruano Pach Email: ICQ:1252101 AIM:Tlabok IRC:Kobalt Homepage: http://www.pobox.com/~kobalt/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com Received: from max.bungi.com (max.bungi.com [207.126.97.7]) by sprite.real-time.com (8.10.2/8.10.2) with ESMTP id e5RIvXm19660 for ; Tue, 27 Jun 2000 13:57:34 -0500 Received: by max.bungi.com (8.9.1/8.8.7) id KAA02475 for ascend-users-outgoing; Tue, 27 Jun 2000 10:41:10 -0700 (PDT) X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Received: from daver.bungi.com (daver.bungi.com [207.126.97.2]) by max.bungi.com (8.9.1/8.8.7) with ESMTP id KAA02470 for ; Tue, 27 Jun 2000 10:41:10 -0700 (PDT) Received: from hotmail.com(really [216.33.149.31]) by daver.bungi.com via sendmail with smtp id for ; Tue, 27 Jun 2000 10:41:09 -0700 (PDT) (Smail-3.2.0.94 1997-Apr-22 #299 built 2000-Jun-26) Received: (qmail 32700 invoked by uid 0); 27 Jun 2000 17:41:09 -0000 Message-ID: <20000627174109.32699.qmail@hotmail.com> Received: from 198.4.92.5 by www.hotmail.com with HTTP; Tue, 27 Jun 2000 10:41:09 PDT X-Originating-IP: [198.4.92.5] From: "Joe Max" To: shovey@buffnet.net, ahsank@one.net.pk Cc: ascend-users@bungi.com, sabour@mail.one.net.pk, multitek@super.net.pk Date: Tue, 27 Jun 2000 10:41:09 PDT Mime-Version: 1.0 Content-Type: text/plain; format=flowed Precedence: bulk Subject: [Ascend] Re: (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List No, the dongle is only needed on the MAX6000. Other devices have the correct pinout. -J >From: Steve Hovey >To: Ahsan Khan >Subject: Re: (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. >Date: Mon, 26 Jun 2000 18:43:22 -0400 (EDT) > > >This sounds like a need for that dongle jobby > >On Tue, 27 Jun 2000, Ahsan Khan wrote: > > > Dear Fellows, > > > > I have a strange problem in My MaxTnT. Normally its works fine >but > > some time its just stop responding there is no way to enter in it except > > consol and the dialup connection through which you are connected. I have > > look a lot and find that its 100MB slot stop responding where as >everything > > is fine. > > > > fsck is fine > > > > fatal command gave no error > > > > software is checked ok and reload many times. > > > > > > is there DOS or any denial of service known for MaxTnT which make stop > > responding it Ethernet port as when we change to the normal 10MB port >which > > comes in Controller card its starts work fine. and if you shift back the > > things to 100MB after some times its ok again. > > > > > > Its really very confusing. any help will be appreciated. ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: Received: from max.bungi.com (max.bungi.com [207.126.97.7]) by sprite.real-time.com (8.10.2/8.10.2) with ESMTP id e5RIr7m19578 for ; Tue, 27 Jun 2000 13:53:07 -0500 Received: by max.bungi.com (8.9.1/8.8.7) id KAA02441 for ascend-users-outgoing; Tue, 27 Jun 2000 10:35:53 -0700 (PDT) X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Received: from daver.bungi.com (daver.bungi.com [207.126.97.2]) by max.bungi.com (8.9.1/8.8.7) with ESMTP id KAA02436 for ; Tue, 27 Jun 2000 10:35:53 -0700 (PDT) Received: from james.encomix.es(really [194.143.192.49]) by daver.bungi.com via sendmail with smtp id for ; Tue, 27 Jun 2000 10:35:52 -0700 (PDT) (Smail-3.2.0.94 1997-Apr-22 #299 built 2000-Jun-26) Received: (qmail 8309 invoked by uid 507); 27 Jun 2000 17:35:25 -0000 Date: Tue, 27 Jun 2000 19:35:25 +0200 From: Jonathan Ruano To: "Daniel J. Vance" Cc: "Ascend List" Message-ID: <20000627193525.C1933@james.encomix.es> References: <20000627140338.B26604@james.encomix.es> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: ; from techlists@rvi.net on Tue, Jun 27, 2000 at 09:41:31AM -0700 Precedence: bulk Subject: [Ascend] Re: (ASCEND) Far End Hung Up Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List On Tue, Jun 27, 2000 at 09:41:31AM -0700, Daniel J. Vance wrote: > I had this problem too, but on the 6096. On the TNT, can you issue the avm > command? I noticed that tons of the modems were on the pending 195 list. I didnt find avm command in the common prompt, nor in the card slot menu. I see a lot of available modems, but most of them on the second csmx card. Hmmm... I wonder if this has something to do, but there're no suspect nor faulty modems. I guess I'm gonna send a spare csmx card to see if that's the problem. > -Daniel > > P.S. Feel free to call me if you like. Hey, you people are the best.. Never found this willing to help before.. Thanks a lot! -- Jonathan Ruano Pach Email: ICQ:1252101 AIM:Tlabok IRC:Kobalt Homepage: http://www.pobox.com/~kobalt/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: Received: from max.bungi.com (max.bungi.com [207.126.97.7]) by sprite.real-time.com (8.10.2/8.10.2) with ESMTP id e5RNF2m21334 for ; Tue, 27 Jun 2000 18:15:27 -0500 Received: by max.bungi.com (8.9.1/8.8.7) id NAA03104 for ascend-users-outgoing; Tue, 27 Jun 2000 13:17:57 -0700 (PDT) X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Received: from eclipse.pacifier.com (eclipse.pacifier.com [199.2.117.78]) by max.bungi.com (8.9.1/8.8.7) with ESMTP id NAA03099 for ; Tue, 27 Jun 2000 13:17:56 -0700 (PDT) From: danziger@pacifier.com Received: from thundar (ip152.hdr1.pacifier.com [216.65.133.152]) by eclipse.pacifier.com (8.10.1/8.10.1) with SMTP id e5RKHmt13344 for ; Tue, 27 Jun 2000 13:17:48 -0700 (PDT) Message-Id: <3.0.1.32.20000627131645.006ae800@mail.pacifier.com> X-Sender: danziger@mail.pacifier.com X-Mailer: Windows Eudora Pro Version 3.0.1 (32) Date: Tue, 27 Jun 2000 13:16:45 -0700 To: ascend-users@max.bungi.com Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Precedence: bulk Subject: [Ascend] (ASCEND) Yet another P-75 4-Sale Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List P-75 for sale for $200.00 UBRI with a serial # 71864xx. This unit looks new and is in perfect working order.. includes all doc's (books), cables and power supply. Dan Rickard I.D. Computer Systems Inc. 541-386-2168 danziger@pacifier.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: Received: from max.bungi.com (max.bungi.com [207.126.97.7]) by sprite.real-time.com (8.10.2/8.10.2) with ESMTP id e5RImOm19513 for ; Tue, 27 Jun 2000 13:48:24 -0500 Received: by max.bungi.com (8.9.1/8.8.7) id KAA02338 for ascend-users-outgoing; Tue, 27 Jun 2000 10:18:18 -0700 (PDT) X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Received: from daver.bungi.com (daver.bungi.com [207.126.97.2]) by max.bungi.com (8.9.1/8.8.7) with ESMTP id KAA02333 for ; Tue, 27 Jun 2000 10:18:17 -0700 (PDT) Received: from mail.rvi.net(really [209.181.49.10]) by daver.bungi.com via sendmail with esmtp id for ; Tue, 27 Jun 2000 10:18:16 -0700 (PDT) (Smail-3.2.0.94 1997-Apr-22 #299 built 2000-Jun-26) Received: from joesmith [209.181.49.24] by mail.rvi.net (SMTPD32-6.00) id A94038630126; Tue, 27 Jun 2000 09:41:36 -0700 From: "Daniel J. Vance" To: "Ascend List" , "Jonathan Ruano" Date: Tue, 27 Jun 2000 09:41:31 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <20000627140338.B26604@james.encomix.es> X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Importance: Normal Precedence: bulk Subject: [Ascend] RE: (ASCEND) Far End Hung Up Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List I had this problem too, but on the 6096. On the TNT, can you issue the avm command? I noticed that tons of the modems were on the pending 195 list. Once the modems were on this list, the max wouldn't route calls to them, instead it routed calls to the HDLC controller and you would hear a solid tone. This turned out to be one bad trunk at the Central office that kept fouling up calls. The max then decided that these modems might be bad and put them on this list. I hope this helps. -Daniel P.S. Feel free to call me if you like. ---------------------------------------------- Daniel J. Vance | dvance@uci.net Systems Administrator | http://www.uci.net 541-472-0733 | Unicom (ASN 14342) -----Original Message----- From: owner-ascend-users@max.bungi.com [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Jonathan Ruano Sent: Tuesday, June 27, 2000 5:04 AM To: Ascend Users ML Subject: (ASCEND) Far End Hung Up Hello.. Tried searching for info in our manuals (and several PDFs), but no luck. We have a TNT (TAOS 7.2.3), with an 8e1-card with 6 PRIs connected. Everything works fine, but sometimes I get these errors: Jun 27 13:35:57 TNT 1/17: [1/1/5/20] Call rejected, no ports available, [voice] -> [MBID 1046; ->] Jun 27 13:35:57 TNT 1/1: [1/1/5/20] Far End Hung Up Reported as problem to local Telco, but everything seemed ok. The PRIs are at about 60% of use when I see that, but I cant be sure this happens because of that. (There aint more concurrency normally). There are modems available, this happens equally with ISDN and analog connections. Hoped someone could just say "I know what's happening", or could give me a clue. Tried with netif debug command, but it seems so low-level debug, as I was seeing assembly and tried to debug a C program :) Thanks for your time. Jonathan. -- Jonathan Ruano Pach Email: ICQ:1252101 AIM:Tlabok IRC:Kobalt Homepage: http://www.pobox.com/~kobalt/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: Received: from conjurer.real-time.com (IDENT:qmailr@conjurer.real-time.com [206.10.253.11]) by sprite.real-time.com (8.10.2/8.10.2) with SMTP id e5RIQtm19396 for ; Tue, 27 Jun 2000 13:26:55 -0500 Received: (qmail 19674 invoked by uid 4001); 27 Jun 2000 18:12:25 -0000 Mailing-List: contact rte-ascend-help@listserv.real-time.com; run by ezmlm Precedence: bulk X-No-Archive: yes list-help: list-unsubscribe: list-post: list-archives: list-website: Reply-To: ascend-users@max.bungi.com Delivered-To: mailing list rte-ascend@listserv.real-time.com Received: (qmail 19666 invoked from network); 27 Jun 2000 18:12:24 -0000 X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Message-ID: <20000627174013.56674.qmail@hotmail.com> X-Originating-IP: [198.4.92.5] From: "Joe Max" To: ahsank@one.net.pk, ascend-users@bungi.com Cc: sabour@mail.one.net.pk, multitek@super.net.pk Date: Tue, 27 Jun 2000 10:40:12 PDT Mime-Version: 1.0 Content-Type: text/plain; format=flowed Subject: [Ascend] Re: (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List Make sure that the switch or hub that you connect the TNT to is set to match exactly the settings of the TNT regarding half/full-duplex. If you have a 4/1-ether-card or a ether2-card, the 100BT port will not auto-negotiate. So, if the switch is set for autonegotiation, every few minutes, the link will be lost for up to 30 seconds and the TNT will not be able to talk during that time. -J >From: "Ahsan Khan" >To: >Subject: (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. >Date: Tue, 27 Jun 2000 02:40:41 +0500 > >Dear Fellows, > > I have a strange problem in My MaxTnT. Normally its works fine but >some time its just stop responding there is no way to enter in it except >consol and the dialup connection through which you are connected. I have >look a lot and find that its 100MB slot stop responding where as everything >is fine. > >fsck is fine > >fatal command gave no error > >software is checked ok and reload many times. > > >is there DOS or any denial of service known for MaxTnT which make stop >responding it Ethernet port as when we change to the normal 10MB port which >comes in Controller card its starts work fine. and if you shift back the >things to 100MB after some times its ok again. ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com Received: from max.bungi.com (max.bungi.com [207.126.97.7]) by sprite.real-time.com (8.10.2/8.10.2) with ESMTP id e5RIumm19643 for ; Tue, 27 Jun 2000 13:56:48 -0500 Received: by max.bungi.com (8.9.1/8.8.7) id KAA02467 for ascend-users-outgoing; Tue, 27 Jun 2000 10:40:18 -0700 (PDT) X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Received: from daver.bungi.com (daver.bungi.com [207.126.97.2]) by max.bungi.com (8.9.1/8.8.7) with ESMTP id KAA02462 for ; Tue, 27 Jun 2000 10:40:17 -0700 (PDT) Received: from hotmail.com(really [216.33.149.210]) by daver.bungi.com via sendmail with smtp id for ; Tue, 27 Jun 2000 10:40:17 -0700 (PDT) (Smail-3.2.0.94 1997-Apr-22 #299 built 2000-Jun-26) Received: (qmail 56675 invoked by uid 0); 27 Jun 2000 17:40:13 -0000 Message-ID: <20000627174013.56674.qmail@hotmail.com> Received: from 198.4.92.5 by www.hotmail.com with HTTP; Tue, 27 Jun 2000 10:40:12 PDT X-Originating-IP: [198.4.92.5] From: "Joe Max" To: ahsank@one.net.pk, ascend-users@bungi.com Cc: sabour@mail.one.net.pk, multitek@super.net.pk Date: Tue, 27 Jun 2000 10:40:12 PDT Mime-Version: 1.0 Content-Type: text/plain; format=flowed Precedence: bulk Subject: [Ascend] Re: (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List Make sure that the switch or hub that you connect the TNT to is set to match exactly the settings of the TNT regarding half/full-duplex. If you have a 4/1-ether-card or a ether2-card, the 100BT port will not auto-negotiate. So, if the switch is set for autonegotiation, every few minutes, the link will be lost for up to 30 seconds and the TNT will not be able to talk during that time. -J >From: "Ahsan Khan" >To: >Subject: (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. >Date: Tue, 27 Jun 2000 02:40:41 +0500 > >Dear Fellows, > > I have a strange problem in My MaxTnT. Normally its works fine but >some time its just stop responding there is no way to enter in it except >consol and the dialup connection through which you are connected. I have >look a lot and find that its 100MB slot stop responding where as everything >is fine. > >fsck is fine > >fatal command gave no error > >software is checked ok and reload many times. > > >is there DOS or any denial of service known for MaxTnT which make stop >responding it Ethernet port as when we change to the normal 10MB port which >comes in Controller card its starts work fine. and if you shift back the >things to 100MB after some times its ok again. ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: Received: from conjurer.real-time.com (IDENT:qmailr@conjurer.real-time.com [206.10.253.11]) by sprite.real-time.com (8.10.2/8.10.2) with SMTP id e5RMYCm21124 for ; Tue, 27 Jun 2000 17:34:17 -0500 Received: (qmail 22613 invoked by uid 4001); 27 Jun 2000 22:19:38 -0000 Mailing-List: contact rte-ascend-help@listserv.real-time.com; run by ezmlm Precedence: bulk X-No-Archive: yes list-help: list-unsubscribe: list-post: list-archives: list-website: Reply-To: ascend-users@max.bungi.com Delivered-To: mailing list rte-ascend@listserv.real-time.com Received: (qmail 22605 invoked from network); 27 Jun 2000 22:19:36 -0000 X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f From: danziger@pacifier.com Message-Id: <3.0.1.32.20000627131645.006ae800@mail.pacifier.com> X-Sender: danziger@mail.pacifier.com X-Mailer: Windows Eudora Pro Version 3.0.1 (32) Date: Tue, 27 Jun 2000 13:16:45 -0700 To: ascend-users@max.bungi.com Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Subject: [Ascend] (ASCEND) Yet another P-75 4-Sale Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List P-75 for sale for $200.00 UBRI with a serial # 71864xx. This unit looks new and is in perfect working order.. includes all doc's (books), cables and power supply. Dan Rickard I.D. Computer Systems Inc. 541-386-2168 danziger@pacifier.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com Received: from conjurer.real-time.com (IDENT:qmailr@conjurer.real-time.com [206.10.253.11]) by sprite.real-time.com (8.10.2/8.10.2) with SMTP id e5RIQdm19381 for ; Tue, 27 Jun 2000 13:26:39 -0500 Received: (qmail 19638 invoked by uid 4001); 27 Jun 2000 18:12:08 -0000 Mailing-List: contact rte-ascend-help@listserv.real-time.com; run by ezmlm Precedence: bulk X-No-Archive: yes list-help: list-unsubscribe: list-post: list-archives: list-website: Reply-To: ascend-users@max.bungi.com Delivered-To: mailing list rte-ascend@listserv.real-time.com Received: (qmail 19630 invoked from network); 27 Jun 2000 18:12:07 -0000 X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Message-ID: <20000627174109.32699.qmail@hotmail.com> X-Originating-IP: [198.4.92.5] From: "Joe Max" To: shovey@buffnet.net, ahsank@one.net.pk Cc: ascend-users@bungi.com, sabour@mail.one.net.pk, multitek@super.net.pk Date: Tue, 27 Jun 2000 10:41:09 PDT Mime-Version: 1.0 Content-Type: text/plain; format=flowed Subject: [Ascend] Re: (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List No, the dongle is only needed on the MAX6000. Other devices have the correct pinout. -J >From: Steve Hovey >To: Ahsan Khan >Subject: Re: (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. >Date: Mon, 26 Jun 2000 18:43:22 -0400 (EDT) > > >This sounds like a need for that dongle jobby > >On Tue, 27 Jun 2000, Ahsan Khan wrote: > > > Dear Fellows, > > > > I have a strange problem in My MaxTnT. Normally its works fine >but > > some time its just stop responding there is no way to enter in it except > > consol and the dialup connection through which you are connected. I have > > look a lot and find that its 100MB slot stop responding where as >everything > > is fine. > > > > fsck is fine > > > > fatal command gave no error > > > > software is checked ok and reload many times. > > > > > > is there DOS or any denial of service known for MaxTnT which make stop > > responding it Ethernet port as when we change to the normal 10MB port >which > > comes in Controller card its starts work fine. and if you shift back the > > things to 100MB after some times its ok again. > > > > > > Its really very confusing. any help will be appreciated. ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com Received: from conjurer.real-time.com (IDENT:qmailr@conjurer.real-time.com [206.10.253.11]) by sprite.real-time.com (8.10.2/8.10.2) with SMTP id e5RIQWm19366 for ; Tue, 27 Jun 2000 13:26:32 -0500 Received: (qmail 19612 invoked by uid 4001); 27 Jun 2000 18:12:01 -0000 Mailing-List: contact rte-ascend-help@listserv.real-time.com; run by ezmlm Precedence: bulk X-No-Archive: yes list-help: list-unsubscribe: list-post: list-archives: list-website: Reply-To: ascend-users@max.bungi.com Delivered-To: mailing list rte-ascend@listserv.real-time.com Received: (qmail 19604 invoked from network); 27 Jun 2000 18:12:00 -0000 X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f Date: Tue, 27 Jun 2000 19:35:25 +0200 From: Jonathan Ruano To: "Daniel J. Vance" Cc: "Ascend List" Message-ID: <20000627193525.C1933@james.encomix.es> References: <20000627140338.B26604@james.encomix.es> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: ; from techlists@rvi.net on Tue, Jun 27, 2000 at 09:41:31AM -0700 Subject: [Ascend] Re: (ASCEND) Far End Hung Up Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List On Tue, Jun 27, 2000 at 09:41:31AM -0700, Daniel J. Vance wrote: > I had this problem too, but on the 6096. On the TNT, can you issue the avm > command? I noticed that tons of the modems were on the pending 195 list. I didnt find avm command in the common prompt, nor in the card slot menu. I see a lot of available modems, but most of them on the second csmx card. Hmmm... I wonder if this has something to do, but there're no suspect nor faulty modems. I guess I'm gonna send a spare csmx card to see if that's the problem. > -Daniel > > P.S. Feel free to call me if you like. Hey, you people are the best.. Never found this willing to help before.. Thanks a lot! -- Jonathan Ruano Pach Email: ICQ:1252101 AIM:Tlabok IRC:Kobalt Homepage: http://www.pobox.com/~kobalt/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com Received: from conjurer.real-time.com (IDENT:qmailr@conjurer.real-time.com [206.10.253.11]) by sprite.real-time.com (8.10.2/8.10.2) with SMTP id e5RIK3m19328 for ; Tue, 27 Jun 2000 13:20:03 -0500 Received: (qmail 19183 invoked by uid 4001); 27 Jun 2000 18:05:33 -0000 Mailing-List: contact rte-ascend-help@listserv.real-time.com; run by ezmlm Precedence: bulk X-No-Archive: yes list-help: list-unsubscribe: list-post: list-archives: list-website: Reply-To: ascend-users@max.bungi.com Delivered-To: mailing list rte-ascend@listserv.real-time.com Received: (qmail 19175 invoked from network); 27 Jun 2000 18:05:31 -0000 X-Authentication-Warning: max.bungi.com: majordom set sender to owner-ascend-users using -f From: "Daniel J. Vance" To: "Ascend List" , "Jonathan Ruano" Date: Tue, 27 Jun 2000 09:41:31 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <20000627140338.B26604@james.encomix.es> X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Importance: Normal Subject: [Ascend] RE: (ASCEND) Far End Hung Up Sender: rte-ascend-admin@lists.real-time.com Errors-To: rte-ascend-admin@lists.real-time.com X-BeenThere: rte-ascend@lists.real-time.com X-Mailman-Version: 2.0beta2 List-Id: Ascend Users Mailing List I had this problem too, but on the 6096. On the TNT, can you issue the avm command? I noticed that tons of the modems were on the pending 195 list. Once the modems were on this list, the max wouldn't route calls to them, instead it routed calls to the HDLC controller and you would hear a solid tone. This turned out to be one bad trunk at the Central office that kept fouling up calls. The max then decided that these modems might be bad and put them on this list. I hope this helps. -Daniel P.S. Feel free to call me if you like. ---------------------------------------------- Daniel J. Vance | dvance@uci.net Systems Administrator | http://www.uci.net 541-472-0733 | Unicom (ASN 14342) -----Original Message----- From: owner-ascend-users@max.bungi.com [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Jonathan Ruano Sent: Tuesday, June 27, 2000 5:04 AM To: Ascend Users ML Subject: (ASCEND) Far End Hung Up Hello.. Tried searching for info in our manuals (and several PDFs), but no luck. We have a TNT (TAOS 7.2.3), with an 8e1-card with 6 PRIs connected. Everything works fine, but sometimes I get these errors: Jun 27 13:35:57 TNT 1/17: [1/1/5/20] Call rejected, no ports available, [voice] -> [MBID 1046; ->] Jun 27 13:35:57 TNT 1/1: [1/1/5/20] Far End Hung Up Reported as problem to local Telco, but everything seemed ok. The PRIs are at about 60% of use when I see that, but I cant be sure this happens because of that. (There aint more concurrency normally). There are modems available, this happens equally with ISDN and analog connections. Hoped someone could just say "I know what's happening", or could give me a clue. Tried with netif debug command, but it seems so low-level debug, as I was seeing assembly and tried to debug a C program :) Thanks for your time. Jonathan. -- Jonathan Ruano Pach Email: ICQ:1252101 AIM:Tlabok IRC:Kobalt Homepage: http://www.pobox.com/~kobalt/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com From plalor at infoasis.com Tue Jun 27 17:46:02 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:58:27 2005 Subject: [Ascend] (ASCEND) SNMP OID for Frame Relay PVCs Message-ID: Hi all, I need to monitor the traffic on specific DLCIs on Frame Relay circuits on a DSL Max 20. One can watch the traffic on a DLCI-by-DLCI basis in FR-Stat, but I need some help figuring out the relevant OID so I can get the info via SNMP. Is it in the standard Frame Relay MIB? How do you find OID relating to the specific Frame Relay circuit, and the specific DLCI within that? Does anyone have an example MRTG target? Thanks. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com From plalor at infoasis.com Tue Jun 27 17:46:02 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] (ASCEND) SNMP OID for Frame Relay PVCs Message-ID: Hi all, I need to monitor the traffic on specific DLCIs on Frame Relay circuits on a DSL Max 20. One can watch the traffic on a DLCI-by-DLCI basis in FR-Stat, but I need some help figuring out the relevant OID so I can get the info via SNMP. Is it in the standard Frame Relay MIB? How do you find OID relating to the specific Frame Relay circuit, and the specific DLCI within that? Does anyone have an example MRTG target? Thanks. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From kerrinp at chariot.net.au Tue Jun 27 19:21:19 2000 From: kerrinp at chariot.net.au (Kerrin Pine) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] Re: (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. In-Reply-To: <20000627174109.32699.qmail@hotmail.com> Message-ID: <4.3.2.7.2.20000628095019.02c169a0@mail.chariot.net.au> Not true - we need the dongle for our TNTs to talk to Alteons properly in 100M full-duplex mode. Cheers Kerrin At 03:11 28/06/00, Joe Max wrote: >No, the dongle is only needed on the MAX6000. Other devices have the >correct pinout. >-J -- Kerrin Pine (kerrinp@chariot.net.au) | Web: http://www.chariot.net.au/ Network Operations Manager, CCNA | Web: http://www.kerrin.com/ Chariot Internet Limited | Ph : (+61) 08 8291 8888 214 Greenhill Road, EASTWOOD SA 5063 | Fax: 08 8291 8822 The contents of this e-mail and its attachments are confidential and may be subject to legal professional privilege and copyright. It is intended solely for the addressee. Access to this e-mail and its attachment by anyone else is unauthorised. No representation is made that this e-mail or any attachment is free of viruses and other defects. Virus scanning is recommended and is the responsibility of the recipient. If you are not the intended addressee, any disclosure, usage, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited. If you have received this communication in error, please advise the sender immediately by reply e-mail and delete this message from your computer. Thank you for your cooperation. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com From kerrinp at chariot.net.au Tue Jun 27 19:21:19 2000 From: kerrinp at chariot.net.au (Kerrin Pine) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] Re: (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. In-Reply-To: <20000627174109.32699.qmail@hotmail.com> Message-ID: <4.3.2.7.2.20000628095019.02c169a0@mail.chariot.net.au> Not true - we need the dongle for our TNTs to talk to Alteons properly in 100M full-duplex mode. Cheers Kerrin At 03:11 28/06/00, Joe Max wrote: >No, the dongle is only needed on the MAX6000. Other devices have the >correct pinout. >-J -- Kerrin Pine (kerrinp@chariot.net.au) | Web: http://www.chariot.net.au/ Network Operations Manager, CCNA | Web: http://www.kerrin.com/ Chariot Internet Limited | Ph : (+61) 08 8291 8888 214 Greenhill Road, EASTWOOD SA 5063 | Fax: 08 8291 8822 The contents of this e-mail and its attachments are confidential and may be subject to legal professional privilege and copyright. It is intended solely for the addressee. Access to this e-mail and its attachment by anyone else is unauthorised. No representation is made that this e-mail or any attachment is free of viruses and other defects. Virus scanning is recommended and is the responsibility of the recipient. If you are not the intended addressee, any disclosure, usage, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited. If you have received this communication in error, please advise the sender immediately by reply e-mail and delete this message from your computer. Thank you for your cooperation. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From lennard at ns1.carib-link.net Wed Jun 28 09:31:58 2000 From: lennard at ns1.carib-link.net (Lennard Kong) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] (ASCEND) WTB Max 4004 modem cards Message-ID: Hi, Looking for some 56k Modem cards to go into a Max 4004. Please email me, Thanks, Lennard Kong ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com From maxed_out_user at hotmail.com Wed Jun 28 10:43:01 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] (ASCEND) SNMP OID for Frame Relay PVCs Message-ID: <20000628154301.77493.qmail@hotmail.com> I don't believe there's any Ascend specific OID for this, but there are some frame relay OIDs for MIB II. Particularly, you can check in the 'transmission->frameRelay->frCircuitTable->frCircuitEntry (1.3.6.1.2.1.10.32.2.1) area. The question is, does the Ascend agent code return anything on this? You will just have to try and see what happens. Hi all, I need to monitor the traffic on specific DLCIs on Frame Relay circuits on a DSL Max 20. One can watch the traffic on a DLCI-by-DLCI basis in FR-Stat, but I need some help figuring out the relevant OID so I can get the info via SNMP. Is it in the standard Frame Relay MIB? How do you find OID relating to the specific Frame Relay circuit, and the specific DLCI within that? Does anyone have an example MRTG target? Thanks. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com From kobalt at pobox.com Wed Jun 28 10:53:51 2000 From: kobalt at pobox.com (Jonathan Ruano) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] (ASCEND) SOLVED TNT (was Far End Hung Up) Message-ID: <20000628175351.T32093@james.encomix.es> Hiya. Finally, a colleague entered with that Windoze-based SNMP tool and searching for trees, found this thing. Symptoms: Even with enough modems available, TNT kept on giving 'Call rejected, no ports available' and 'Far End Hung Up' messages. Had two modem cards, and the second one seemed as reluctant to accept more than a certain number of connections. Problem: There were digital call routing configured, but not voice calls. This is a dump of what I have right now (already fixed) in that modem card (which is at slot 5): admin> get call-route {{{1 5 0}0}0} [in CALL-ROUTE/{ { { shelf-1 slot-5 0 } 0 } 0 }] index* = { { { shelf-1 slot-5 0 } 0 } 0 } trunk-group = 0 phone-number = "" preferred-source = { { any-shelf any-slot 0 } 0 } call-route-type = voice-call-type ^--- this one was erroneously set to trunk-call-type or the like admin> get call-route {{{1 5 0}0}1} [in CALL-ROUTE/{ { { shelf-1 slot-5 0 } 0 } 1 }] index* = { { { shelf-1 slot-5 0 } 0 } 1 } trunk-group = 0 phone-number = "" preferred-source = { { any-shelf any-slot 0 } 0 } call-route-type = digital-call-type This way, only digital calls were accepted by this modem card. When the other card was full (or analogs or any type), only more digital calls could enter. Thanks to all the people that helped me. Hope this msg will help you if you're stuck with this problem and search the mailing list via web :) -- Jonathan Ruano Pach Email: ICQ:1252101 AIM:Tlabok IRC:Kobalt Homepage: http://www.pobox.com/~kobalt/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com From maxed_out_user at hotmail.com Wed Jun 28 10:43:01 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] (ASCEND) SNMP OID for Frame Relay PVCs Message-ID: <20000628154301.77493.qmail@hotmail.com> I don't believe there's any Ascend specific OID for this, but there are some frame relay OIDs for MIB II. Particularly, you can check in the 'transmission->frameRelay->frCircuitTable->frCircuitEntry (1.3.6.1.2.1.10.32.2.1) area. The question is, does the Ascend agent code return anything on this? You will just have to try and see what happens. Hi all, I need to monitor the traffic on specific DLCIs on Frame Relay circuits on a DSL Max 20. One can watch the traffic on a DLCI-by-DLCI basis in FR-Stat, but I need some help figuring out the relevant OID so I can get the info via SNMP. Is it in the standard Frame Relay MIB? How do you find OID relating to the specific Frame Relay circuit, and the specific DLCI within that? Does anyone have an example MRTG target? Thanks. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From lennard at ns1.carib-link.net Wed Jun 28 09:31:58 2000 From: lennard at ns1.carib-link.net (Lennard Kong) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] (ASCEND) WTB Max 4004 modem cards Message-ID: Hi, Looking for some 56k Modem cards to go into a Max 4004. Please email me, Thanks, Lennard Kong ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From kobalt at pobox.com Wed Jun 28 10:53:51 2000 From: kobalt at pobox.com (Jonathan Ruano) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] (ASCEND) SOLVED TNT (was Far End Hung Up) Message-ID: <20000628175351.T32093@james.encomix.es> Hiya. Finally, a colleague entered with that Windoze-based SNMP tool and searching for trees, found this thing. Symptoms: Even with enough modems available, TNT kept on giving 'Call rejected, no ports available' and 'Far End Hung Up' messages. Had two modem cards, and the second one seemed as reluctant to accept more than a certain number of connections. Problem: There were digital call routing configured, but not voice calls. This is a dump of what I have right now (already fixed) in that modem card (which is at slot 5): admin> get call-route {{{1 5 0}0}0} [in CALL-ROUTE/{ { { shelf-1 slot-5 0 } 0 } 0 }] index* = { { { shelf-1 slot-5 0 } 0 } 0 } trunk-group = 0 phone-number = "" preferred-source = { { any-shelf any-slot 0 } 0 } call-route-type = voice-call-type ^--- this one was erroneously set to trunk-call-type or the like admin> get call-route {{{1 5 0}0}1} [in CALL-ROUTE/{ { { shelf-1 slot-5 0 } 0 } 1 }] index* = { { { shelf-1 slot-5 0 } 0 } 1 } trunk-group = 0 phone-number = "" preferred-source = { { any-shelf any-slot 0 } 0 } call-route-type = digital-call-type This way, only digital calls were accepted by this modem card. When the other card was full (or analogs or any type), only more digital calls could enter. Thanks to all the people that helped me. Hope this msg will help you if you're stuck with this problem and search the mailing list via web :) -- Jonathan Ruano Pach Email: ICQ:1252101 AIM:Tlabok IRC:Kobalt Homepage: http://www.pobox.com/~kobalt/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From max_and_tnt at hotmail.com Wed Jun 28 12:23:55 2000 From: max_and_tnt at hotmail.com (Joe Max) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] Re: (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. Message-ID: <20000628172355.3408.qmail@hotmail.com> >From: Kerrin Pine > >Not true - we need the dongle for our TNTs to talk to Alteons properly in >100M full-duplex mode. Are you referring to the dongle on the ethernet-3 card? That's the only card that requires a dongle because of its stupid design. Other TNT cards do not require any dongle because they have the correct pinout. If you are using a MAX dongle, then I'm 100% sure you don't need it: you probably have a mismatch that gets masked by the dongle. Dongle or no dongle, the thing to remember is that the 100 MB ports on the 4/1-ether-card and 4-ether2-card cards do not autonegotiate half/full duplex. This is due to how the signalling works during autonegotiation and due to the particular PHY chips used in those cards. The 10/100 option may be negotiated correctly but the half/full duplex part will not be negotiated. When using these cards, switches that attempt to autonegotiate half/full duplex will fail and usually drop to half-duplex because it is safest. If you have a 4/1-ether-card or a 4ether2-card and experience intermittent traffic disruptions on your 100MB link, check first that both sides agree on all settings (10/100, half/full). If the switch can only autonegotiate (ie, it can't be configured to a fix setting), then set your TNT for _half_ duplex. -J ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com From max_and_tnt at hotmail.com Wed Jun 28 12:23:55 2000 From: max_and_tnt at hotmail.com (Joe Max) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] Re: (ASCEND) MaxTnT 7.0.3 Hangs automaticaly. Message-ID: <20000628172355.3408.qmail@hotmail.com> >From: Kerrin Pine > >Not true - we need the dongle for our TNTs to talk to Alteons properly in >100M full-duplex mode. Are you referring to the dongle on the ethernet-3 card? That's the only card that requires a dongle because of its stupid design. Other TNT cards do not require any dongle because they have the correct pinout. If you are using a MAX dongle, then I'm 100% sure you don't need it: you probably have a mismatch that gets masked by the dongle. Dongle or no dongle, the thing to remember is that the 100 MB ports on the 4/1-ether-card and 4-ether2-card cards do not autonegotiate half/full duplex. This is due to how the signalling works during autonegotiation and due to the particular PHY chips used in those cards. The 10/100 option may be negotiated correctly but the half/full duplex part will not be negotiated. When using these cards, switches that attempt to autonegotiate half/full duplex will fail and usually drop to half-duplex because it is safest. If you have a 4/1-ether-card or a 4ether2-card and experience intermittent traffic disruptions on your 100MB link, check first that both sides agree on all settings (10/100, half/full). If the switch can only autonegotiate (ie, it can't be configured to a fix setting), then set your TNT for _half_ duplex. -J ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From danko at sezampro.yu Wed Jun 28 14:19:35 2000 From: danko at sezampro.yu (Danko Jevtovic) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] (ASCEND) IDSL card for MAX4000 In-Reply-To: <20000628172355.3408.qmail@hotmail.com> Message-ID: Hi, I am looking for user IDSL card for MAX4000. Please email me your offers, regards Danko ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com From danko at sezampro.yu Wed Jun 28 14:19:35 2000 From: danko at sezampro.yu (Danko Jevtovic) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] (ASCEND) IDSL card for MAX4000 In-Reply-To: <20000628172355.3408.qmail@hotmail.com> Message-ID: Hi, I am looking for user IDSL card for MAX4000. Please email me your offers, regards Danko ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From eldridge at duo-county.com Thu Jun 29 15:11:39 2000 From: eldridge at duo-county.com (Rick Eldridge) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] (ASCEND) Disconnects on the TNT Message-ID: <3.0.5.32.20000629151139.00c90d10@mail.duo-county.com> We are having many complaints about unwanted disconnects on our TNT. The disconnect cause code is 11. Does anybody have any ideas as to what the cause might be? We are getting killed with customers calling in about the drops. We are at software release 7.0.4. Thanks in advance. Rick ___________________________________________________________ Rick Eldridge eldridge@duo-county.com Network Engineer Voice: (270)343-3131 Duo County Telephone Coop. Fax: (270)343-3800 PO Box 80 2150 N Hwy 127 Jamestown KY 42629 http://www.duo-county.com ___________________________________________________________ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: --------------------------------------------------------------------- To unsubscribe, e-mail: rte-ascend-unsubscribe@listserv.real-time.com For additional commands, e-mail: rte-ascend-help@listserv.real-time.com From eldridge at duo-county.com Thu Jun 29 15:11:39 2000 From: eldridge at duo-county.com (Rick Eldridge) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] (ASCEND) Disconnects on the TNT Message-ID: <3.0.5.32.20000629151139.00c90d10@mail.duo-county.com> We are having many complaints about unwanted disconnects on our TNT. The disconnect cause code is 11. Does anybody have any ideas as to what the cause might be? We are getting killed with customers calling in about the drops. We are at software release 7.0.4. Thanks in advance. Rick ___________________________________________________________ Rick Eldridge eldridge@duo-county.com Network Engineer Voice: (270)343-3131 Duo County Telephone Coop. Fax: (270)343-3800 PO Box 80 2150 N Hwy 127 Jamestown KY 42629 http://www.duo-county.com ___________________________________________________________ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tanner at real-time.com Fri Jun 30 21:35:39 2000 From: tanner at real-time.com (Bob Tanner) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] Testing Message-ID: <20000630213539.E32613@real-time.com> Testing. -- Bob Tanner | Phone : (612)943-8700 http://www.mn-linux.org | Fax : (612)943-8500 Key fingerprint = 6C E9 51 4F D5 3E 4C 66 62 A9 10 E5 35 85 39 D9 From max_and_tnt at hotmail.com Fri Jun 30 21:47:09 2000 From: max_and_tnt at hotmail.com (Joe Max) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] Re: (ASCEND) Disconnects on the TNT Message-ID: <20000701024709.93490.qmail@hotmail.com> Disconnect cause 11 means "loss of modem carrier". Carrier loss may happen for a variety of reasons and many of them are perfectly normal disconnects. You get d=11 if the user has call-waiting and someone calls him while online. This was a killer until we knew to tell those users to turn off call waiting. It may also happen if there is noise on the line and the modems can't retrain in time. You need to take a look at the progress codes to see where are the calls getting stuck. Good luck (you will need it), -J >From: Rick Eldridge > >We are having many complaints about unwanted disconnects on our TNT. The >disconnect cause code is 11. Does anybody have any ideas as to what the >cause might be? We are getting killed with customers calling in about the >drops. We are at software release 7.0.4. > >Thanks in advance. >Rick ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From max_and_tnt at hotmail.com Fri Jun 30 21:47:09 2000 From: max_and_tnt at hotmail.com (Joe Max) Date: Tue Jan 18 13:58:28 2005 Subject: [Ascend] Re: (ASCEND) Disconnects on the TNT Message-ID: <20000701024709.93490.qmail@hotmail.com> Disconnect cause 11 means "loss of modem carrier". Carrier loss may happen for a variety of reasons and many of them are perfectly normal disconnects. You get d=11 if the user has call-waiting and someone calls him while online. This was a killer until we knew to tell those users to turn off call waiting. It may also happen if there is noise on the line and the modems can't retrain in time. You need to take a look at the progress codes to see where are the calls getting stuck. Good luck (you will need it), -J >From: Rick Eldridge > >We are having many complaints about unwanted disconnects on our TNT. The >disconnect cause code is 11. Does anybody have any ideas as to what the >cause might be? We are getting killed with customers calling in about the >drops. We are at software release 7.0.4. > >Thanks in advance. >Rick ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: