From bob at cave.net Sun Oct 1 09:48:54 2000 From: bob at cave.net (Bob Bradlee) Date: Tue Jan 18 13:59:23 2005 Subject: [Ascend] (ASCEND) WTB: Blank cover plates for MAX 40xx Message-ID: <39D74ED6.92E1CCC7@CAVE.NET> I have a max 4000 that currently has 6 33.6 modem cards in it. It is an older unit with 2 fans. I understand that I can only safely put 3x56k cards in due to power supply/cooling problems. I have replaced the chassis fans with new ones to reduce that threat. What I need is three of the blank cover plates to close off the 3 now unused slots to keep the air flowing as designed. I think that 200mph tape will work, but I am not quite ready to take the verbal abuse I would get from the other guys in the co-loc I am installing it in. I might get away with it if I could find some Black duct tape :) If anyone still has a few that they did not throw out after the last upgrade I would be grateful. Thanks for any help. Bob ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From bob at cave.net Sun Oct 1 09:48:54 2000 From: bob at cave.net (Bob Bradlee) Date: Tue Jan 18 13:59:23 2005 Subject: [Ascend] (ASCEND) WTB: Blank cover plates for MAX 40xx Message-ID: <39D74ED6.92E1CCC7@CAVE.NET> I have a max 4000 that currently has 6 33.6 modem cards in it. It is an older unit with 2 fans. I understand that I can only safely put 3x56k cards in due to power supply/cooling problems. I have replaced the chassis fans with new ones to reduce that threat. What I need is three of the blank cover plates to close off the 3 now unused slots to keep the air flowing as designed. I think that 200mph tape will work, but I am not quite ready to take the verbal abuse I would get from the other guys in the co-loc I am installing it in. I might get away with it if I could find some Black duct tape :) If anyone still has a few that they did not throw out after the last upgrade I would be grateful. Thanks for any help. Bob ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From dl at origin.net.au Sun Oct 1 21:35:16 2000 From: dl at origin.net.au (David Latter) Date: Tue Jan 18 13:59:23 2005 Subject: [Ascend] (ASCEND) Max 6000 grouping In-Reply-To: <001c01c029ad$5ce3fc20$8dfee0d1@westbend.net> Message-ID: <002401c02c19$66486940$ccb517cb@origin> What is the best way to connect 2 or more max 6000 so they act as one (is this possible) The problem we have is that we have 2 numbers xxxx00 is answered by both max and xxxx10 is only set up to answer on the second max. This is fine but the telco presents the number on a random port and if that isn't on the second max they get a busy signal? What is my best solution for this? Thanks David ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From dl at origin.net.au Sun Oct 1 21:35:16 2000 From: dl at origin.net.au (David Latter) Date: Tue Jan 18 13:59:23 2005 Subject: [Ascend] (ASCEND) Max 6000 grouping In-Reply-To: <001c01c029ad$5ce3fc20$8dfee0d1@westbend.net> Message-ID: <002401c02c19$66486940$ccb517cb@origin> What is the best way to connect 2 or more max 6000 so they act as one (is this possible) The problem we have is that we have 2 numbers xxxx00 is answered by both max and xxxx10 is only set up to answer on the second max. This is fine but the telco presents the number on a random port and if that isn't on the second max they get a busy signal? What is my best solution for this? Thanks David ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mark at reynolds.net.au Sun Oct 1 23:51:25 2000 From: mark at reynolds.net.au (Mark Reynolds) Date: Tue Jan 18 13:59:23 2005 Subject: [Ascend] (ASCEND) ascend faq? Message-ID: <3.0.5.32.20001002125125.007b4180@mail.rts.com.au> Greetings all. Seeing the quality and quantity of great ascend info going through this list, I'm keen to track down the FAQ. To get FAQ'd: Doesn't seem to go anywhere. Can anyone point me in the right direction? Thanks. --- Mark Reynolds Reynolds Technology Pty Ltd Phone 1300 656 424 http://www.reynolds.net.au Phone 08 9474 1211 mailto:mark@reynolds.net.au Fax 08 9474 4772 PO Box 120 Como 6952 Western Australia Pager 08 9480 5884 8 Preston Street Como 6152 Western Australia ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mark at reynolds.net.au Sun Oct 1 23:51:25 2000 From: mark at reynolds.net.au (Mark Reynolds) Date: Tue Jan 18 13:59:23 2005 Subject: [Ascend] (ASCEND) ascend faq? Message-ID: <3.0.5.32.20001002125125.007b4180@mail.rts.com.au> Greetings all. Seeing the quality and quantity of great ascend info going through this list, I'm keen to track down the FAQ. To get FAQ'd: Doesn't seem to go anywhere. Can anyone point me in the right direction? Thanks. --- Mark Reynolds Reynolds Technology Pty Ltd Phone 1300 656 424 http://www.reynolds.net.au Phone 08 9474 1211 mailto:mark@reynolds.net.au Fax 08 9474 4772 PO Box 120 Como 6952 Western Australia Pager 08 9480 5884 8 Preston Street Como 6152 Western Australia ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From HJong at triview.nl Mon Oct 2 04:42:42 2000 From: HJong at triview.nl (HJong@triview.nl) Date: Tue Jan 18 13:59:23 2005 Subject: [Ascend] (ASCEND) Re: ascend faq? Message-ID: The FAQ is available at ftp://ftp.shore.net/members/dreaming/ascend-faq.txt but it's ancient (1995). A more useful resource is the list archive at http://archives2.real-time.com/rte-ascend/ -- Harro de Jong ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From HJong at triview.nl Mon Oct 2 04:42:42 2000 From: HJong at triview.nl (HJong@triview.nl) Date: Tue Jan 18 13:59:23 2005 Subject: [Ascend] (ASCEND) Re: ascend faq? Message-ID: The FAQ is available at ftp://ftp.shore.net/members/dreaming/ascend-faq.txt but it's ancient (1995). A more useful resource is the list archive at http://archives2.real-time.com/rte-ascend/ -- Harro de Jong ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jyrki.kainulainen at datatie.fi Mon Oct 2 09:19:27 2000 From: jyrki.kainulainen at datatie.fi (Jyrki Kainulainen) Date: Tue Jan 18 13:59:23 2005 Subject: [Ascend] (ASCEND) Radius accountig server state change and new refresh problem? In-Reply-To: References: <4.3.1.2.20000925155655.00a75270@mail.datatie.fi> Message-ID: <5.0.0.25.2.20001002144404.00a3f7b0@mail.datatie.fi> >set OID .iso.3.6.1.4.1.529.9.6.1.0 to the integer value 2 >like "snmpset $ip $WRITE_COMMUNITY .iso.3.6.1.4.1.529.9.6.1.0 i 2" That's it! refresh -a = ...529.9.6.1.0 to integer 1. > >>Set the OID .1.3.6.1.4.1.529.13.3.1.12.1 to the > >>value 2 like snmpset $ip $WRITE_COMMUNITY .1.3.6.1.4.1.529.13.3.1.12.1 i 2 > >>setting the above OID to 2 resets the state of the RadiusServers. > >>So that the first configured Radius will be used first. > > >I guess radAuthCurrentServerFlag (12) and radAcctCurrentServerFlag (7) are > >similar, so setting 12.1 and 7.1 to 2 will reset both auth and acct to the > >first configured host. That was my wild guess. I didn't get it working so that both authentication and accounting server states were reseted, only authentication ;-(. ????? Another thing: When I set TNT System:permconn-update... = changed, and do that refresh -a, all changed ATM connections will be put down and new profiles asked from radius. After refresh, there are none of those changed ATM connections up!. So, I do refresh -a command again and then one (1) accounting start is sent, even there were many refreshed/changed ATM connection profiles, and after that all connections are working. What's the logic here?? Anyone?? Regards, Jyrki Kainulainen. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jyrki.kainulainen at datatie.fi Mon Oct 2 09:19:27 2000 From: jyrki.kainulainen at datatie.fi (Jyrki Kainulainen) Date: Tue Jan 18 13:59:23 2005 Subject: [Ascend] (ASCEND) Radius accountig server state change and new refresh problem? In-Reply-To: References: <4.3.1.2.20000925155655.00a75270@mail.datatie.fi> Message-ID: <5.0.0.25.2.20001002144404.00a3f7b0@mail.datatie.fi> >set OID .iso.3.6.1.4.1.529.9.6.1.0 to the integer value 2 >like "snmpset $ip $WRITE_COMMUNITY .iso.3.6.1.4.1.529.9.6.1.0 i 2" That's it! refresh -a = ...529.9.6.1.0 to integer 1. > >>Set the OID .1.3.6.1.4.1.529.13.3.1.12.1 to the > >>value 2 like snmpset $ip $WRITE_COMMUNITY .1.3.6.1.4.1.529.13.3.1.12.1 i 2 > >>setting the above OID to 2 resets the state of the RadiusServers. > >>So that the first configured Radius will be used first. > > >I guess radAuthCurrentServerFlag (12) and radAcctCurrentServerFlag (7) are > >similar, so setting 12.1 and 7.1 to 2 will reset both auth and acct to the > >first configured host. That was my wild guess. I didn't get it working so that both authentication and accounting server states were reseted, only authentication ;-(. ????? Another thing: When I set TNT System:permconn-update... = changed, and do that refresh -a, all changed ATM connections will be put down and new profiles asked from radius. After refresh, there are none of those changed ATM connections up!. So, I do refresh -a command again and then one (1) accounting start is sent, even there were many refreshed/changed ATM connection profiles, and after that all connections are working. What's the logic here?? Anyone?? Regards, Jyrki Kainulainen. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From hos at de.uu.net Sun Oct 1 13:16:31 2000 From: hos at de.uu.net (Holger Steppke) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] RE: (ASCEND) TNT refresh -a via SNMP? In-Reply-To: <4.3.1.2.20000925155655.00a75270@mail.datatie.fi> Message-ID: Try this set OID .iso.3.6.1.4.1.529.9.6.1.0 to the integer value 2 like "snmpset $ip $WRITE_COMMUNITY .iso.3.6.1.4.1.529.9.6.1.0 i 2" Bye ... >-----Original Message----- >From: Jyrki Kainulainen [mailto:jyrki.kainulainen@datatie.fi] >Sent: Monday, September 25, 2000 3:27 PM >To: hos@de.uu.net >Cc: ascend-users@bungi.com >Subject: RE: (ASCEND) TNT refresh -a via SNMP? > > >At 19:46 24.9.2000 +0200, you wrote: >>1. Yes It is. Set the OID .1.3.6.1.4.1.529.13.3.1.12.1 to the >value 2 like >>snmpset $ip $WRITE_COMMUNITY .1.3.6.1.4.1.529.13.3.1.12.1 i 2 >> >>2. setting the above OID to 2 resets the state of the RadiusServers. >>So that the first configured Radius will be used first. >> >> >1. Is it possible to execute the "refresh -a" command on MAX >TNT via SNMP? >> > >> >2. I think I've seen that there is possibility to send "Current RADIUS >> >server update" via SNMP, but I'm not sure. Is there? What I >mean is, when >> >TNT has changed its state so that it's using my secondary radius and I >> >would like to change it back to primary one. > >Thank's. I tried that OID and it worked for that second case but not the >first one. The Radius server state is changed but no radius >authentication >requests are sent, so refreshing isn't working. > >I guess radAuthCurrentServerFlag (12) and >radAcctCurrentServerFlag (7) are >similar, so setting 12.1 and 7.1 to 2 will reset both auth and >acct to the >first configured host. > >When I change or add new nailed connection to Radius, I need to do that >refresh -command on TNT. I don't want to telnet to TNT and give that >command if it could be done easier. > >Where I can find details about those OIDs and values to set? Only doc I >have is that APX 8000 /MAX TNT Administration Guide, and there >are not much >details. Only those snmp trees... > >With Best Regards, >Jyrki Kainulainen. > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From hos at de.uu.net Sun Oct 1 13:16:31 2000 From: hos at de.uu.net (Holger Steppke) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] RE: (ASCEND) TNT refresh -a via SNMP? In-Reply-To: <4.3.1.2.20000925155655.00a75270@mail.datatie.fi> Message-ID: Try this set OID .iso.3.6.1.4.1.529.9.6.1.0 to the integer value 2 like "snmpset $ip $WRITE_COMMUNITY .iso.3.6.1.4.1.529.9.6.1.0 i 2" Bye ... >-----Original Message----- >From: Jyrki Kainulainen [mailto:jyrki.kainulainen@datatie.fi] >Sent: Monday, September 25, 2000 3:27 PM >To: hos@de.uu.net >Cc: ascend-users@bungi.com >Subject: RE: (ASCEND) TNT refresh -a via SNMP? > > >At 19:46 24.9.2000 +0200, you wrote: >>1. Yes It is. Set the OID .1.3.6.1.4.1.529.13.3.1.12.1 to the >value 2 like >>snmpset $ip $WRITE_COMMUNITY .1.3.6.1.4.1.529.13.3.1.12.1 i 2 >> >>2. setting the above OID to 2 resets the state of the RadiusServers. >>So that the first configured Radius will be used first. >> >> >1. Is it possible to execute the "refresh -a" command on MAX >TNT via SNMP? >> > >> >2. I think I've seen that there is possibility to send "Current RADIUS >> >server update" via SNMP, but I'm not sure. Is there? What I >mean is, when >> >TNT has changed its state so that it's using my secondary radius and I >> >would like to change it back to primary one. > >Thank's. I tried that OID and it worked for that second case but not the >first one. The Radius server state is changed but no radius >authentication >requests are sent, so refreshing isn't working. > >I guess radAuthCurrentServerFlag (12) and >radAcctCurrentServerFlag (7) are >similar, so setting 12.1 and 7.1 to 2 will reset both auth and >acct to the >first configured host. > >When I change or add new nailed connection to Radius, I need to do that >refresh -command on TNT. I don't want to telnet to TNT and give that >command if it could be done easier. > >Where I can find details about those OIDs and values to set? Only doc I >have is that APX 8000 /MAX TNT Administration Guide, and there >are not much >details. Only those snmp trees... > >With Best Regards, >Jyrki Kainulainen. > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From maxed_out_user at hotmail.com Mon Oct 2 13:42:17 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] Re: (ASCEND) Max 6000 grouping Message-ID: You can either let the xxxx10 number be answered by both Maxes or else call your line provider (telco) and have them only send xxxx10 to the lines on the second Max (it's a telco hunt group configuration issue that is beyond what you can do from your site). What is the best way to connect 2 or more max 6000 so they act as one (is this possible) The problem we have is that we have 2 numbers xxxx00 is answered by both max and xxxx10 is only set up to answer on the second max. This is fine but the telco presents the number on a random port and if that isn't on the second max they get a busy signal? What is my best solution for this? Thanks David _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From maxed_out_user at hotmail.com Mon Oct 2 13:42:17 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] Re: (ASCEND) Max 6000 grouping Message-ID: You can either let the xxxx10 number be answered by both Maxes or else call your line provider (telco) and have them only send xxxx10 to the lines on the second Max (it's a telco hunt group configuration issue that is beyond what you can do from your site). What is the best way to connect 2 or more max 6000 so they act as one (is this possible) The problem we have is that we have 2 numbers xxxx00 is answered by both max and xxxx10 is only set up to answer on the second max. This is fine but the telco presents the number on a random port and if that isn't on the second max they get a busy signal? What is my best solution for this? Thanks David _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From Lee.Jones at innosoft.com Mon Oct 2 13:29:46 2000 From: Lee.Jones at innosoft.com (Lee Jones) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] Re: (ASCEND) WTB: Blank cover plates for MAX 40xx In-Reply-To: "Your message dated Sun, 01 Oct 2000 10:48:54 -0400" <39D74ED6.92E1CCC7@CAVE.NET> Message-ID: <01JUUZ6P8230985Z48@innosoft.com> > I have a max 4000 that currently has 6 33.6 modem cards in it. > It is an older unit with 2 fans. I understand that I can only > safely put 3x56k cards in due to power supply/cooling problems. > What I need is three of the blank cover plates to close off the > 3 now unused slots to keep the air flowing as designed. I think > that 200mph tape will work > if I could find some Black duct tape :) Gaffers tape comes in black. I'd cut a piece of cardboard to size then coat it with black gaffers tape. Overhang all edges to stick it to the chassis. Lee ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From Lee.Jones at innosoft.com Mon Oct 2 13:29:46 2000 From: Lee.Jones at innosoft.com (Lee Jones) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] Re: (ASCEND) WTB: Blank cover plates for MAX 40xx In-Reply-To: "Your message dated Sun, 01 Oct 2000 10:48:54 -0400" <39D74ED6.92E1CCC7@CAVE.NET> Message-ID: <01JUUZ6P8230985Z48@innosoft.com> > I have a max 4000 that currently has 6 33.6 modem cards in it. > It is an older unit with 2 fans. I understand that I can only > safely put 3x56k cards in due to power supply/cooling problems. > What I need is three of the blank cover plates to close off the > 3 now unused slots to keep the air flowing as designed. I think > that 200mph tape will work > if I could find some Black duct tape :) Gaffers tape comes in black. I'd cut a piece of cardboard to size then coat it with black gaffers tape. Overhang all edges to stick it to the chassis. Lee ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From maxed_out_user at hotmail.com Mon Oct 2 14:06:43 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] Re: (ASCEND) Max 4K-6K Flex OFF??? Message-ID: Actually, if "MDM Modulation" is set for V.90, the Max 4k/6k will first present 56k-flex, then V.90; basically meaning it will try both and not just V.90. Therefore, if a dual mode modem dials in (dual mode meaning it will do 56k-flex or V.90), it will accept the 56k-flex offer from the Max and end up doing 56k-flex so hence you run into the problem you mentioned below. In version 7.0, there was a parameter added under System->Sys Config called "AT Answer String". If you plug in this value... +A8E=,,,0 ...it will disable the V.8bis tone (the tone sounds like an initial bee-boop tone), which is used for 56flex negotiations. Client modems should now only get a V.90 request. Hope this helps. I'm willing to try that, but.....in my experience (since 1996, code rev 4.5B) I've found that if the folks on this list can't answer it, neither can anyone else. Unless something has changed drastically, I really don't want to spend half a day on hold, or being transferred because my rep (ca last month) has been "promoted" to East BFE or somesuch. I'm not cracking on Ascend at all-everyone's hardware tech support sucks, 'cause most people that call it can't RTFM or RTRUBB. I can, and did, and it doesn't work that way, and I've found that getting Ascend support on the phone and informing them of such just confuses them. Admittedly it has been more than a year since I tried it, so maybe something has changed. Paul Robbie wrote: >Then please open a case with the TAC for your area. >Paul > >-----Original Message----- >From: owner-ascend-users@max.bungi.com >[mailto:owner-ascend-users@max.bungi.com]On Behalf Of Darkshot's >Lists >Sent: Wednesday, September 27, 2000 8:28 AM >To: robinson@ascend.com.au; ascend-users@bungi.com >Subject: Re: (ASCEND) Max 4K-6K Flex OFF??? > > >Did that. Doesn't work. > > > Paul Robbie wrote: > > > > Yep - there is a parameter under the TServ options "MDM > > Modulation". Set that to V.90. > > Paul > > > > -----Original Message----- > > From: owner-ascend-users@max.bungi.com > > [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Darkshot's > > Lists > > Sent: Saturday, September 23, 2000 5:13 AM > > To: ascend-users@bungi.com > > Subject: (ASCEND) Max 4K-6K Flex OFF??? > > > > > > If this is in an obvious place in a FAQ or in the RUBB, I > > apologize but I can't find it- and I feel certain that it must be > > there: > > > > How in the heck can you tell a Max NOT to fall back to K56Flex? To > > make it do V.90 or nothing? > > > > Our users with dual-mode modems (both Flex and V.90) ALWAYS > > connect via Flex, and in our rural areas this means disconnects, > > "stun mode" + constant re-trains. Giving our users the "force > > V.90" init string for their modems (if we know it) improves > > matters drastically. > > > > I'm tired of people leaving us to go with our competitor (who uses > > TC racks) because the get a faster connection- and the only reason > > is that the Max insists on running K56Flex if it can. > > > > How to kill it dead? Also- I'd love to see a hack that would > > support x2 fallback...... > > > > All our Maxen are at 7.0.3 and I admit I don't even know what > > the current release is nor what it fixes/breaks. 7.0.3 was the > > first stable one we had and I've never been tempted. ;-) > > > > Any info on this, please cc: darkshot@chudys.com so I don't > > miss is in my lists email account. > > > > Much obliged- > > > > 'Shot _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From maxed_out_user at hotmail.com Mon Oct 2 14:06:43 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] Re: (ASCEND) Max 4K-6K Flex OFF??? Message-ID: Actually, if "MDM Modulation" is set for V.90, the Max 4k/6k will first present 56k-flex, then V.90; basically meaning it will try both and not just V.90. Therefore, if a dual mode modem dials in (dual mode meaning it will do 56k-flex or V.90), it will accept the 56k-flex offer from the Max and end up doing 56k-flex so hence you run into the problem you mentioned below. In version 7.0, there was a parameter added under System->Sys Config called "AT Answer String". If you plug in this value... +A8E=,,,0 ...it will disable the V.8bis tone (the tone sounds like an initial bee-boop tone), which is used for 56flex negotiations. Client modems should now only get a V.90 request. Hope this helps. I'm willing to try that, but.....in my experience (since 1996, code rev 4.5B) I've found that if the folks on this list can't answer it, neither can anyone else. Unless something has changed drastically, I really don't want to spend half a day on hold, or being transferred because my rep (ca last month) has been "promoted" to East BFE or somesuch. I'm not cracking on Ascend at all-everyone's hardware tech support sucks, 'cause most people that call it can't RTFM or RTRUBB. I can, and did, and it doesn't work that way, and I've found that getting Ascend support on the phone and informing them of such just confuses them. Admittedly it has been more than a year since I tried it, so maybe something has changed. Paul Robbie wrote: >Then please open a case with the TAC for your area. >Paul > >-----Original Message----- >From: owner-ascend-users@max.bungi.com >[mailto:owner-ascend-users@max.bungi.com]On Behalf Of Darkshot's >Lists >Sent: Wednesday, September 27, 2000 8:28 AM >To: robinson@ascend.com.au; ascend-users@bungi.com >Subject: Re: (ASCEND) Max 4K-6K Flex OFF??? > > >Did that. Doesn't work. > > > Paul Robbie wrote: > > > > Yep - there is a parameter under the TServ options "MDM > > Modulation". Set that to V.90. > > Paul > > > > -----Original Message----- > > From: owner-ascend-users@max.bungi.com > > [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Darkshot's > > Lists > > Sent: Saturday, September 23, 2000 5:13 AM > > To: ascend-users@bungi.com > > Subject: (ASCEND) Max 4K-6K Flex OFF??? > > > > > > If this is in an obvious place in a FAQ or in the RUBB, I > > apologize but I can't find it- and I feel certain that it must be > > there: > > > > How in the heck can you tell a Max NOT to fall back to K56Flex? To > > make it do V.90 or nothing? > > > > Our users with dual-mode modems (both Flex and V.90) ALWAYS > > connect via Flex, and in our rural areas this means disconnects, > > "stun mode" + constant re-trains. Giving our users the "force > > V.90" init string for their modems (if we know it) improves > > matters drastically. > > > > I'm tired of people leaving us to go with our competitor (who uses > > TC racks) because the get a faster connection- and the only reason > > is that the Max insists on running K56Flex if it can. > > > > How to kill it dead? Also- I'd love to see a hack that would > > support x2 fallback...... > > > > All our Maxen are at 7.0.3 and I admit I don't even know what > > the current release is nor what it fixes/breaks. 7.0.3 was the > > first stable one we had and I've never been tempted. ;-) > > > > Any info on this, please cc: darkshot@chudys.com so I don't > > miss is in my lists email account. > > > > Much obliged- > > > > 'Shot _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From darkshot at chudys.com Mon Oct 2 14:52:17 2000 From: darkshot at chudys.com (Darkshot) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] Re: (ASCEND) Max 4K-6K Flex OFF??? References: Message-ID: <39D8E771.B90AC610@chudys.com> Max User wrote: > > Actually, if "MDM Modulation" is set for V.90, the Max 4k/6k will first > present 56k-flex, then V.90; basically meaning it will try both and not just > V.90. Therefore, if a dual mode modem dials in (dual mode meaning it will > do 56k-flex or V.90), it will accept the 56k-flex offer from the Max and end > up doing 56k-flex so hence you run into the problem you mentioned below. > > In version 7.0, there was a parameter added under System->Sys Config called > "AT Answer String". If you plug in this value... > > +A8E=,,,0 > > ...it will disable the V.8bis tone (the tone sounds like an initial bee-boop > tone), which is used for 56flex negotiations. Client modems should now only > get a V.90 request. > > Hope this helps. I heard that trick from someone else and am currently running it on one Max6K- and it does disable the "bee-boop tone"- but damned if I can't log on with a "pure" K56Flex Zoom modem at 46,000..... I see fewer Kflex connects (I assume that even-numbered connections are all Kflex and I may be wrong here) than before, but they're still there. And we tested several K56Flex-Only modems and they all connected in the 40's. So I'm stumped. In any case, it's better than it was- so thanks to all who sent me this tip! 'Shot ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From darkshot at chudys.com Mon Oct 2 14:52:17 2000 From: darkshot at chudys.com (Darkshot) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] Re: (ASCEND) Max 4K-6K Flex OFF??? References: Message-ID: <39D8E771.B90AC610@chudys.com> Max User wrote: > > Actually, if "MDM Modulation" is set for V.90, the Max 4k/6k will first > present 56k-flex, then V.90; basically meaning it will try both and not just > V.90. Therefore, if a dual mode modem dials in (dual mode meaning it will > do 56k-flex or V.90), it will accept the 56k-flex offer from the Max and end > up doing 56k-flex so hence you run into the problem you mentioned below. > > In version 7.0, there was a parameter added under System->Sys Config called > "AT Answer String". If you plug in this value... > > +A8E=,,,0 > > ...it will disable the V.8bis tone (the tone sounds like an initial bee-boop > tone), which is used for 56flex negotiations. Client modems should now only > get a V.90 request. > > Hope this helps. I heard that trick from someone else and am currently running it on one Max6K- and it does disable the "bee-boop tone"- but damned if I can't log on with a "pure" K56Flex Zoom modem at 46,000..... I see fewer Kflex connects (I assume that even-numbered connections are all Kflex and I may be wrong here) than before, but they're still there. And we tested several K56Flex-Only modems and they all connected in the 40's. So I'm stumped. In any case, it's better than it was- so thanks to all who sent me this tip! 'Shot ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jim at top.net Mon Oct 2 17:40:57 2000 From: jim at top.net (Jim Logan) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] (ASCEND) PipeLine Products for Sale Message-ID: <4.2.0.58.20001002173716.0247d8d0@top.net> Quanity limited on some items, Used Tested and Cleared Equipment unless specified as New: Ascend Pipeline 50-1UBRI-ASA, Complete, firewall and IpSec installed: $160 Ascend Pipeline 50-1UBRI, Firewall and IpSec Installed: $150 Ascend Pipeline 50-1UBRI w/Power: $125 Ascend Pipeline 75-1UBRI-ASA, Complete, Firewall/IpSec, Dual Pots: $235 Ascend Pipeline 75-1UBRI, w/Firewall & IpSec, Dual Pots: $225 Lucent Pipeline 75-1UBRI-ASA (New - Unopened box - complete): $260 Ascend Pipeline 130-UBRI-V35 w/power, Firewall: $400 Ascend Pipeline 130-UBRI-FT1 w/Power, Cables, Firewall: $ 550 Warranty on items is 30 Days or Mfg Warranty on new items. We accept all credit cards and can do COD via FedEx. All items owned and available, can be shipped per your needs. Email off list or call (402) 339-5609 or Page at (402) 977-2880. ******* Top Net InterNet Services ******** Omaha, Nebraska www.top.net Voice: (402) 339-5609 Fax: (402) 333-8383 Pager: (402) 977-2880 *********************************************** ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jim at top.net Mon Oct 2 17:40:57 2000 From: jim at top.net (Jim Logan) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] (ASCEND) PipeLine Products for Sale Message-ID: <4.2.0.58.20001002173716.0247d8d0@top.net> Quanity limited on some items, Used Tested and Cleared Equipment unless specified as New: Ascend Pipeline 50-1UBRI-ASA, Complete, firewall and IpSec installed: $160 Ascend Pipeline 50-1UBRI, Firewall and IpSec Installed: $150 Ascend Pipeline 50-1UBRI w/Power: $125 Ascend Pipeline 75-1UBRI-ASA, Complete, Firewall/IpSec, Dual Pots: $235 Ascend Pipeline 75-1UBRI, w/Firewall & IpSec, Dual Pots: $225 Lucent Pipeline 75-1UBRI-ASA (New - Unopened box - complete): $260 Ascend Pipeline 130-UBRI-V35 w/power, Firewall: $400 Ascend Pipeline 130-UBRI-FT1 w/Power, Cables, Firewall: $ 550 Warranty on items is 30 Days or Mfg Warranty on new items. We accept all credit cards and can do COD via FedEx. All items owned and available, can be shipped per your needs. Email off list or call (402) 339-5609 or Page at (402) 977-2880. ******* Top Net InterNet Services ******** Omaha, Nebraska www.top.net Voice: (402) 339-5609 Fax: (402) 333-8383 Pager: (402) 977-2880 *********************************************** ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Tue Oct 3 11:43:59 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] (ASCEND) Re: ascend faq? In-Reply-To: <200010030545.WAA13325@max.bungi.com> References: <200010030545.WAA13325@max.bungi.com> Message-ID: >From: HJong@triview.nl > >A more useful resource is the list archive at >http://archives2.real-time.com/rte-ascend/ There _is_ a current list archive?! And all this time the only one I new of was http://www.nexial.com/cgi-bin/ascendbody, which hasn't been updated since 1998. You just made my day. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Tue Oct 3 11:52:52 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] (ASCEND) Re: Radius accountig server state change and new refresh problem? In-Reply-To: <200010030545.WAA13325@max.bungi.com> References: <200010030545.WAA13325@max.bungi.com> Message-ID: >From: "Jyrki Kainulainen" > >Another thing: When I set TNT System:permconn-update... = changed, and do >that refresh -a, all changed ATM connections will be put down and new >profiles asked from radius. After refresh, there are none of those changed >ATM connections up!. So, I do refresh -a command again and then one (1) >accounting start is sent, even there were many refreshed/changed ATM >connection profiles, and after that all connections are working. What's the >logic here?? We don't use permconns with our TNT, but we do use ATM permconns with a DSL Terminator 100. We find that equivalent to permconn-update... = changed in it is seriously broken. With Perm Conn Update=Changed, active profiles will be torn down at random and a random number will succeed in coming back up. The only fix is to set it to Perm Conn Update=All, which forces all permconns down when any are changed or added. Sometimes, a restart is necessary to get them all going again. I opened a ticket on the problem back in April but got nowhere. Granted, the TNT is a different (i.e. good) box than the Terminator, but they both run TAOS... -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tom at ispstuff.com Tue Oct 3 09:31:28 2000 From: tom at ispstuff.com (ISPstuff) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] (ASCEND) Housecleaning time - Max 6096, 56k modem cards, etc. FS Message-ID: <3.0.3.32.20001003093128.02310440@mail.icd.com> We are an Ascend/Lucent based ISP and need to clear out our surplus equipment. Since this is an Ascend list, I have only listed our spare Ascend/Lucent equipment. All equipment is in house and ready to ship today. Max 6096 chassis with 4 T1s enabled, FR, ISDN, DC, etc. One owner with 6 months use. Original box, manuals, cables, etc. $3950 MX-SL-16MOD-S56 modem cards $1650 each Fully loaded Max 6096 (with 96 ports of modems) $12950 Max 4002 chassis with ISDN $800 Max 4002 chassis without ISDN $650 Max MX-SL-12MOD v.34 modem cards $175 each Max MX-SL-32HDLC card $250 Max MX-SL-8MOD v.34 modem cards $75 each 110 volt power supplies for Pipeline 50 $25 each. All equipment guaranteed. Tom - 815-968-9888 or reply by email. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Tue Oct 3 11:43:59 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:24 2005 Subject: [Ascend] (ASCEND) Re: ascend faq? In-Reply-To: <200010030545.WAA13325@max.bungi.com> References: <200010030545.WAA13325@max.bungi.com> Message-ID: >From: HJong@triview.nl > >A more useful resource is the list archive at >http://archives2.real-time.com/rte-ascend/ There _is_ a current list archive?! And all this time the only one I new of was http://www.nexial.com/cgi-bin/ascendbody, which hasn't been updated since 1998. You just made my day. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Tue Oct 3 11:52:52 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) Re: Radius accountig server state change and new refresh problem? In-Reply-To: <200010030545.WAA13325@max.bungi.com> References: <200010030545.WAA13325@max.bungi.com> Message-ID: >From: "Jyrki Kainulainen" > >Another thing: When I set TNT System:permconn-update... = changed, and do >that refresh -a, all changed ATM connections will be put down and new >profiles asked from radius. After refresh, there are none of those changed >ATM connections up!. So, I do refresh -a command again and then one (1) >accounting start is sent, even there were many refreshed/changed ATM >connection profiles, and after that all connections are working. What's the >logic here?? We don't use permconns with our TNT, but we do use ATM permconns with a DSL Terminator 100. We find that equivalent to permconn-update... = changed in it is seriously broken. With Perm Conn Update=Changed, active profiles will be torn down at random and a random number will succeed in coming back up. The only fix is to set it to Perm Conn Update=All, which forces all permconns down when any are changed or added. Sometimes, a restart is necessary to get them all going again. I opened a ticket on the problem back in April but got nowhere. Granted, the TNT is a different (i.e. good) box than the Terminator, but they both run TAOS... -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tom at ispstuff.com Tue Oct 3 09:31:28 2000 From: tom at ispstuff.com (ISPstuff) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) Housecleaning time - Max 6096, 56k modem cards, etc. FS Message-ID: <3.0.3.32.20001003093128.02310440@mail.icd.com> We are an Ascend/Lucent based ISP and need to clear out our surplus equipment. Since this is an Ascend list, I have only listed our spare Ascend/Lucent equipment. All equipment is in house and ready to ship today. Max 6096 chassis with 4 T1s enabled, FR, ISDN, DC, etc. One owner with 6 months use. Original box, manuals, cables, etc. $3950 MX-SL-16MOD-S56 modem cards $1650 each Fully loaded Max 6096 (with 96 ports of modems) $12950 Max 4002 chassis with ISDN $800 Max 4002 chassis without ISDN $650 Max MX-SL-12MOD v.34 modem cards $175 each Max MX-SL-32HDLC card $250 Max MX-SL-8MOD v.34 modem cards $75 each 110 volt power supplies for Pipeline 50 $25 each. All equipment guaranteed. Tom - 815-968-9888 or reply by email. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Tue Oct 3 17:56:07 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) FS: Max TNT (& APX?) HDLC2ec, Ether2 slot cards Message-ID: Hello all, We have two slot cards for Max TNT (also suits APX, I believe) for sale: TNT-SL-HDLC2-EC-C HDLC2ec slot card $2900 OBO TNT-SL-E10-100 Ether-2 slot card $2400 OBO (1 100M Mbps port, 3 10 Mbps ports) Both cards are seven months old. Thanks. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Tue Oct 3 17:56:07 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) FS: Max TNT (& APX?) HDLC2ec, Ether2 slot cards Message-ID: Hello all, We have two slot cards for Max TNT (also suits APX, I believe) for sale: TNT-SL-HDLC2-EC-C HDLC2ec slot card $2900 OBO TNT-SL-E10-100 Ether-2 slot card $2400 OBO (1 100M Mbps port, 3 10 Mbps ports) Both cards are seven months old. Thanks. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From roddy at satlink.com.au Tue Oct 3 21:58:48 2000 From: roddy at satlink.com.au (Roddy Strachan) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) Stuffed modems? Message-ID: <00bb01c02daf$04bb14b0$20de13cb@Roddy> Hi Any ideas why my max 6k keeps rebooting, and when i go into Diag i get this : MODEMDRV-3/x: IDMA simultaneous test fail -- no valid modems 16MB shared memory found in system > fatal FATAL ERROR: Index: 1 Load: ebaxk.m60 Revision: 7.2.3 Date: 10/04/2000. Time: 11:55:02 Location: b010b0f4 b0285c3c b010a9b4 b010b638 b032e690 b032ea8c SYSTEM IS UP: Index: 100 Load: ebaxk.m60 Revision: 7.2.3 Date: 10/04/2000. Time: 11:57:43 ?? --- Cheers, R. Strachan Satlink Internet Services Pty Ltd. Ph. +61-3-9775-2600 Fax. +61-3-9775-2456 Email. roddy@satlink.com.au rodstrach@hotmail.com rodster@unimobile.com (To Send email to Mobile) ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From roddy at satlink.com.au Tue Oct 3 21:58:48 2000 From: roddy at satlink.com.au (Roddy Strachan) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) Stuffed modems? Message-ID: <00bb01c02daf$04bb14b0$20de13cb@Roddy> Hi Any ideas why my max 6k keeps rebooting, and when i go into Diag i get this : MODEMDRV-3/x: IDMA simultaneous test fail -- no valid modems 16MB shared memory found in system > fatal FATAL ERROR: Index: 1 Load: ebaxk.m60 Revision: 7.2.3 Date: 10/04/2000. Time: 11:55:02 Location: b010b0f4 b0285c3c b010a9b4 b010b638 b032e690 b032ea8c SYSTEM IS UP: Index: 100 Load: ebaxk.m60 Revision: 7.2.3 Date: 10/04/2000. Time: 11:57:43 ?? --- Cheers, R. Strachan Satlink Internet Services Pty Ltd. Ph. +61-3-9775-2600 Fax. +61-3-9775-2456 Email. roddy@satlink.com.au rodstrach@hotmail.com rodster@unimobile.com (To Send email to Mobile) ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mlevans at blacksburg.net Wed Oct 4 08:32:06 2000 From: mlevans at blacksburg.net (Lyle Evans) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) FS: rackears (rackmount brackets) for Ascend & other equipment Message-ID: <3.0.5.32.20001004093206.03a5c210@pop.blacksburg.net> We are selling rackear kits for Ascend 4xxx, and Ascend 1800, We are also selling generic rackears kits for rackmount equipment, in 1U to 6U sizes, and rackears for some models of Cisco, 3comm and other brands of networking equipment. Prices range from $23.00 to $50.00 per pair, depending on model plus $7.00 handling per order. For further information and to order please visit: http://www.rackears.com/ Thank you, Lyle Evans lyle@rackears.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mlevans at blacksburg.net Wed Oct 4 08:32:06 2000 From: mlevans at blacksburg.net (Lyle Evans) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) FS: rackears (rackmount brackets) for Ascend & other equipment Message-ID: <3.0.5.32.20001004093206.03a5c210@pop.blacksburg.net> We are selling rackear kits for Ascend 4xxx, and Ascend 1800, We are also selling generic rackears kits for rackmount equipment, in 1U to 6U sizes, and rackears for some models of Cisco, 3comm and other brands of networking equipment. Prices range from $23.00 to $50.00 per pair, depending on model plus $7.00 handling per order. For further information and to order please visit: http://www.rackears.com/ Thank you, Lyle Evans lyle@rackears.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jcs at idpc.com Wed Oct 4 12:29:48 2000 From: jcs at idpc.com (John Shaw) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) MAX 4048's Message-ID: <01C02E07.2BA75810.jcs@idpc.com> IDPC SPECIAL: Ascend MAX 4048's (V.90) configured with 3 x 16 port modem cards - refurbished. Part numbers: CHASSIS - MXHP-2T1-48ES - Dual T1 CARDS - MX-SL-16MOD-S56 $4995.00ea. This shipment has been tested by Lucent and are in Lucent box's. If interested please get in touch. Regards, John Shaw Information Data Products Corp. 28 Bowling Green Parkway Lake Hopatcong, NJ 07849 www.idpc.com IDPC carries the full line of hardware from the following manufacturers. New & refurbished: AT&T, Bay Networks (Nortel), Micom, Paradyne, Lucent, CISCO, Codex/Motorola, Adtran, Kentrox, Netopia, Ascend, 3Com, IBM, Racal, N.E.T., TX Port (Verilink), Datatel, SonicWall, Tellabs, ZyXEL and many others. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From up at 3.am Wed Oct 4 12:59:09 2000 From: up at 3.am (up@3.am) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) Max 4048 static IP users not routing Message-ID: I have a couple of Cisco AS5248s and 2 Max 4048s If a user with a static IP dials into the Cisco, he gets around fine. If he dials into the Max, he can't get anywhere, nor can I traceroute to him. I'm running Cistron radius 1.6.1 with the following type of entry in my /etc/raddb/users file: joeuser Auth-Type = System, Simultaneous-Use = 1 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = 1.2.3.4 Framed-Netmask=255.255.255.255 I know I had this working at one point, but something's changed since then and it's not working. Running OSPF, ASBR=no. Any ideas? TIA, James Smallacombe PlantageNet, Inc. CEO and Janitor up@3.am http://3.am ========================================================================= ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jcs at idpc.com Wed Oct 4 12:29:48 2000 From: jcs at idpc.com (John Shaw) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) MAX 4048's Message-ID: <01C02E07.2BA75810.jcs@idpc.com> IDPC SPECIAL: Ascend MAX 4048's (V.90) configured with 3 x 16 port modem cards - refurbished. Part numbers: CHASSIS - MXHP-2T1-48ES - Dual T1 CARDS - MX-SL-16MOD-S56 $4995.00ea. This shipment has been tested by Lucent and are in Lucent box's. If interested please get in touch. Regards, John Shaw Information Data Products Corp. 28 Bowling Green Parkway Lake Hopatcong, NJ 07849 www.idpc.com IDPC carries the full line of hardware from the following manufacturers. New & refurbished: AT&T, Bay Networks (Nortel), Micom, Paradyne, Lucent, CISCO, Codex/Motorola, Adtran, Kentrox, Netopia, Ascend, 3Com, IBM, Racal, N.E.T., TX Port (Verilink), Datatel, SonicWall, Tellabs, ZyXEL and many others. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From up at 3.am Wed Oct 4 12:59:09 2000 From: up at 3.am (up@3.am) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) Max 4048 static IP users not routing Message-ID: I have a couple of Cisco AS5248s and 2 Max 4048s If a user with a static IP dials into the Cisco, he gets around fine. If he dials into the Max, he can't get anywhere, nor can I traceroute to him. I'm running Cistron radius 1.6.1 with the following type of entry in my /etc/raddb/users file: joeuser Auth-Type = System, Simultaneous-Use = 1 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = 1.2.3.4 Framed-Netmask=255.255.255.255 I know I had this working at one point, but something's changed since then and it's not working. Running OSPF, ASBR=no. Any ideas? TIA, James Smallacombe PlantageNet, Inc. CEO and Janitor up@3.am http://3.am ========================================================================= ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tom at rydrcom.com Wed Oct 4 10:58:47 2000 From: tom at rydrcom.com (Tom Ryder) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) Items for sale Message-ID: <024601c02e1c$1edaed80$0401a8c0@tom> Hello, RYDRCOM has been asked to sell a number of Ascend items returned off-lease after 2-3 years out. Items available are MAX 1800/2000/4000/6000/800/TNT. Should you have any questions or need any additional information, please feel free to contact us. Thank you, Tom Ryder RYDER Communications, Inc. Wide Area Networking Solutions 35B Wilson Drive Sparta, NJ 07871-3427 Tel. 973-940-7350 / 1-877-RYDRCOM x222 FAX. 973-940-7355 / 1-877-RYDRFAX tom@rydrcom.com www.rydrcom.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tom at rydrcom.com Wed Oct 4 10:58:47 2000 From: tom at rydrcom.com (Tom Ryder) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) Items for sale Message-ID: <024601c02e1c$1edaed80$0401a8c0@tom> Hello, RYDRCOM has been asked to sell a number of Ascend items returned off-lease after 2-3 years out. Items available are MAX 1800/2000/4000/6000/800/TNT. Should you have any questions or need any additional information, please feel free to contact us. Thank you, Tom Ryder RYDER Communications, Inc. Wide Area Networking Solutions 35B Wilson Drive Sparta, NJ 07871-3427 Tel. 973-940-7350 / 1-877-RYDRCOM x222 FAX. 973-940-7355 / 1-877-RYDRFAX tom@rydrcom.com www.rydrcom.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From up at 3.am Wed Oct 4 13:03:35 2000 From: up at 3.am (up@3.am) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) Max 6048 finger not working Message-ID: I use finger on both of my Max 4048's with no problem. A 6048 loaner I have is refusing finger requests, even though it's set to finger=yes under Ethernet-> Mod Config. I get this: Finger online user list denied. running TAOS 8.0.2 Clues appreciated... James Smallacombe PlantageNet, Inc. CEO and Janitor up@3.am http://3.am ========================================================================= ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From up at 3.am Wed Oct 4 13:03:35 2000 From: up at 3.am (up@3.am) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) Max 6048 finger not working Message-ID: I use finger on both of my Max 4048's with no problem. A 6048 loaner I have is refusing finger requests, even though it's set to finger=yes under Ethernet-> Mod Config. I get this: Finger online user list denied. running TAOS 8.0.2 Clues appreciated... James Smallacombe PlantageNet, Inc. CEO and Janitor up@3.am http://3.am ========================================================================= ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From lukejj at hotmail.com Thu Oct 5 22:46:29 2000 From: lukejj at hotmail.com (luke johnson) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) ascend acl's Message-ID: Hi, We are wanting to setup a service where a dialin account can only access, a specific server or group of servers (local and on the internet). My inital reaction was to implement ACL's and define them in the customers radius profile, however, some concern was raised about using ACL's on Ascend gear. Does anyone have any comments or experiences with such implementations? How does it work on a TNT/6000 when assigning on a fairly large scale? Thanks _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From lukejj at hotmail.com Thu Oct 5 22:46:29 2000 From: lukejj at hotmail.com (luke johnson) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) ascend acl's Message-ID: Hi, We are wanting to setup a service where a dialin account can only access, a specific server or group of servers (local and on the internet). My inital reaction was to implement ACL's and define them in the customers radius profile, however, some concern was raised about using ACL's on Ascend gear. Does anyone have any comments or experiences with such implementations? How does it work on a TNT/6000 when assigning on a fairly large scale? Thanks _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From up at 3.am Thu Oct 5 10:24:46 2000 From: up at 3.am (up@3.am) Date: Tue Jan 18 13:59:25 2005 Subject: [Ascend] (ASCEND) Re: Max 6048 finger not working In-Reply-To: Message-ID: On Wed, 4 Oct 2000 up@3.am wrote: > I use finger on both of my Max 4048's with no problem. A 6048 loaner I > have is refusing finger requests, even though it's set to finger=yes under > Ethernet-> Mod Config. I get this: > > Finger online user list denied. > > running TAOS 8.0.2 > > Clues appreciated... update: I went and disabled finger, and the re-enabled it, and now I get: finger: read: Connection reset by peer James Smallacombe PlantageNet, Inc. CEO and Janitor up@3.am http://3.am ========================================================================= ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From up at 3.am Thu Oct 5 10:24:46 2000 From: up at 3.am (up@3.am) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] (ASCEND) Re: Max 6048 finger not working In-Reply-To: Message-ID: On Wed, 4 Oct 2000 up@3.am wrote: > I use finger on both of my Max 4048's with no problem. A 6048 loaner I > have is refusing finger requests, even though it's set to finger=yes under > Ethernet-> Mod Config. I get this: > > Finger online user list denied. > > running TAOS 8.0.2 > > Clues appreciated... update: I went and disabled finger, and the re-enabled it, and now I get: finger: read: Connection reset by peer James Smallacombe PlantageNet, Inc. CEO and Janitor up@3.am http://3.am ========================================================================= ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From stephane.branchoux at univ-perp.fr Fri Oct 6 10:48:04 2000 From: stephane.branchoux at univ-perp.fr (Stephane BRANCHOUX) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] (ASCEND) Merit radius and ascend Box : unknown attributes Message-ID: <200010061454.OAA17837@smtp.univ-perp.fr> Hello, I try to use merit radius Version 3.5.14.2 under Digital Unix 4.0F with an ascend Box. Authentication seems ok but i can't log in. I know this problem is known but i can't solve it modifying dictionnary file. Fri Oct 6 16:27:30 2000: Received-Authentication: 192/9 'stephane@univ-perp.fr' from MAX2012.univ-perp.fr port 20101 $"339355054" PPP/194.167.137.202 Fri Oct 6 16:27:30 2000: insert_attribute: Invalid attribute State (24), type 0, vendor 0 Fri Oct 6 16:27:30 2000: avpair_out: insert_attribute(State(24), ..., 16536, 0x14009b3e4, 0, 0x2, Ascend) returns 0 Fri Oct 6 16:27:30 2000: send_reply: avpair_out(State(24), ..., 16536, Ascend) for type accept returns 0 Fri Oct 6 16:27:30 2000: Authentication: 192/9 'stephane@univ-perp.fr' from MAX2012.univ-perp.fr port 20101 $"339355054" PPP/194.167.137.202 - OK -- total 0, holding 0 Fri Oct 6 16:29:01 2000: gen_valpairs: Received unknown attribute 255 of length 6, dropped, no vendor Fri Oct 6 16:29:01 2000: gen_valpairs: Received unknown attribute 120 of length 6, dropped, no vendor Fri Oct 6 16:29:01 2000: gen_valpairs: Received unknown attribute 121 of length 6, dropped, no vendor Fri Oct 6 16:29:01 2000: Received-Accounting: 104/8 from MAX2012.univ-perp.fr port 20101 $"339355054" Stop Fri Oct 6 16:29:01 2000: Accounting: 104/8 from MAX2012.univ-perp.fr port 20101 $"339355054" Stop - OK -- total 0, holding 0 How can i solve unknown attributes 255, 120 121 ? In my dictionary file these attributes are known : Ascend.attr Ascend-Modem-PortNo 120 integer (*, 0, NOENCAPS) Ascend.attr Ascend-Modem-SlotNo 121 integer (*, 0, NOENCAPS) Ascend.attr Ascend-Modem-ShelfNo 122 integer (*, 0, NOENCAPS) Any idea ? Many thanks in advance. Stephane BRANCHOUX Stephane.Branchoux@univ-perp.fr Tel : 04.68.66.21.24 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From stephane.branchoux at univ-perp.fr Fri Oct 6 10:48:04 2000 From: stephane.branchoux at univ-perp.fr (Stephane BRANCHOUX) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] (ASCEND) Merit radius and ascend Box : unknown attributes Message-ID: <200010061454.OAA17837@smtp.univ-perp.fr> Hello, I try to use merit radius Version 3.5.14.2 under Digital Unix 4.0F with an ascend Box. Authentication seems ok but i can't log in. I know this problem is known but i can't solve it modifying dictionnary file. Fri Oct 6 16:27:30 2000: Received-Authentication: 192/9 'stephane@univ-perp.fr' from MAX2012.univ-perp.fr port 20101 $"339355054" PPP/194.167.137.202 Fri Oct 6 16:27:30 2000: insert_attribute: Invalid attribute State (24), type 0, vendor 0 Fri Oct 6 16:27:30 2000: avpair_out: insert_attribute(State(24), ..., 16536, 0x14009b3e4, 0, 0x2, Ascend) returns 0 Fri Oct 6 16:27:30 2000: send_reply: avpair_out(State(24), ..., 16536, Ascend) for type accept returns 0 Fri Oct 6 16:27:30 2000: Authentication: 192/9 'stephane@univ-perp.fr' from MAX2012.univ-perp.fr port 20101 $"339355054" PPP/194.167.137.202 - OK -- total 0, holding 0 Fri Oct 6 16:29:01 2000: gen_valpairs: Received unknown attribute 255 of length 6, dropped, no vendor Fri Oct 6 16:29:01 2000: gen_valpairs: Received unknown attribute 120 of length 6, dropped, no vendor Fri Oct 6 16:29:01 2000: gen_valpairs: Received unknown attribute 121 of length 6, dropped, no vendor Fri Oct 6 16:29:01 2000: Received-Accounting: 104/8 from MAX2012.univ-perp.fr port 20101 $"339355054" Stop Fri Oct 6 16:29:01 2000: Accounting: 104/8 from MAX2012.univ-perp.fr port 20101 $"339355054" Stop - OK -- total 0, holding 0 How can i solve unknown attributes 255, 120 121 ? In my dictionary file these attributes are known : Ascend.attr Ascend-Modem-PortNo 120 integer (*, 0, NOENCAPS) Ascend.attr Ascend-Modem-SlotNo 121 integer (*, 0, NOENCAPS) Ascend.attr Ascend-Modem-ShelfNo 122 integer (*, 0, NOENCAPS) Any idea ? Many thanks in advance. Stephane BRANCHOUX Stephane.Branchoux@univ-perp.fr Tel : 04.68.66.21.24 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mdobra at mtco.com Sat Oct 7 02:38:16 2000 From: mdobra at mtco.com (Mick Dobra) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] Re: (ASCEND) Merit radius and ascend Box : unknown attributes In-Reply-To: <200010061454.OAA17837@smtp.univ-perp.fr> Message-ID: Anyone know the difference between hdlc2 and hdlc2-ec cards. Put a hdlc2-ec card in a tnt and it just sits in reset state. On Fri, 6 Oct 2000, Stephane BRANCHOUX wrote: > Hello, > > I try to use merit radius Version 3.5.14.2 under Digital Unix 4.0F > > with an ascend Box. > > Authentication seems ok but i can't log in. > > I know this problem is known but i can't solve it modifying dictionnary file. > > Fri Oct 6 16:27:30 2000: Received-Authentication: 192/9 > 'stephane@univ-perp.fr' from MAX2012.univ-perp.fr port 20101 $"339355054" > PPP/194.167.137.202 > Fri Oct 6 16:27:30 2000: insert_attribute: Invalid attribute State (24), > type 0, vendor 0 > Fri Oct 6 16:27:30 2000: avpair_out: insert_attribute(State(24), ..., > 16536, 0x14009b3e4, 0, 0x2, Ascend) returns 0 > Fri Oct 6 16:27:30 2000: send_reply: avpair_out(State(24), ..., 16536, > Ascend) for type accept returns 0 > Fri Oct 6 16:27:30 2000: Authentication: 192/9 'stephane@univ-perp.fr' > from MAX2012.univ-perp.fr port 20101 $"339355054" PPP/194.167.137.202 - OK > -- total 0, holding 0 > Fri Oct 6 16:29:01 2000: gen_valpairs: Received unknown attribute 255 of > length 6, dropped, no vendor > Fri Oct 6 16:29:01 2000: gen_valpairs: Received unknown attribute 120 of > length 6, dropped, no vendor > Fri Oct 6 16:29:01 2000: gen_valpairs: Received unknown attribute 121 of > length 6, dropped, no vendor > Fri Oct 6 16:29:01 2000: Received-Accounting: 104/8 from > MAX2012.univ-perp.fr port 20101 $"339355054" Stop > Fri Oct 6 16:29:01 2000: Accounting: 104/8 from MAX2012.univ-perp.fr port > 20101 $"339355054" Stop - OK -- total 0, holding 0 > > > How can i solve unknown attributes 255, 120 121 ? > > In my dictionary file these attributes are known : > > Ascend.attr Ascend-Modem-PortNo 120 integer (*, 0, > NOENCAPS) > Ascend.attr Ascend-Modem-SlotNo 121 integer (*, 0, > NOENCAPS) > Ascend.attr Ascend-Modem-ShelfNo 122 integer (*, 0, > NOENCAPS) > > > Any idea ? > > Many thanks in advance. > Stephane BRANCHOUX > > > Stephane.Branchoux@univ-perp.fr > > Tel : 04.68.66.21.24 > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: > *********************************************** Mick Dobra Systems Administrator MTCO Communications 1-800-859-6826 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mdobra at mtco.com Sat Oct 7 02:38:16 2000 From: mdobra at mtco.com (Mick Dobra) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] Re: (ASCEND) Merit radius and ascend Box : unknown attributes In-Reply-To: <200010061454.OAA17837@smtp.univ-perp.fr> Message-ID: Anyone know the difference between hdlc2 and hdlc2-ec cards. Put a hdlc2-ec card in a tnt and it just sits in reset state. On Fri, 6 Oct 2000, Stephane BRANCHOUX wrote: > Hello, > > I try to use merit radius Version 3.5.14.2 under Digital Unix 4.0F > > with an ascend Box. > > Authentication seems ok but i can't log in. > > I know this problem is known but i can't solve it modifying dictionnary file. > > Fri Oct 6 16:27:30 2000: Received-Authentication: 192/9 > 'stephane@univ-perp.fr' from MAX2012.univ-perp.fr port 20101 $"339355054" > PPP/194.167.137.202 > Fri Oct 6 16:27:30 2000: insert_attribute: Invalid attribute State (24), > type 0, vendor 0 > Fri Oct 6 16:27:30 2000: avpair_out: insert_attribute(State(24), ..., > 16536, 0x14009b3e4, 0, 0x2, Ascend) returns 0 > Fri Oct 6 16:27:30 2000: send_reply: avpair_out(State(24), ..., 16536, > Ascend) for type accept returns 0 > Fri Oct 6 16:27:30 2000: Authentication: 192/9 'stephane@univ-perp.fr' > from MAX2012.univ-perp.fr port 20101 $"339355054" PPP/194.167.137.202 - OK > -- total 0, holding 0 > Fri Oct 6 16:29:01 2000: gen_valpairs: Received unknown attribute 255 of > length 6, dropped, no vendor > Fri Oct 6 16:29:01 2000: gen_valpairs: Received unknown attribute 120 of > length 6, dropped, no vendor > Fri Oct 6 16:29:01 2000: gen_valpairs: Received unknown attribute 121 of > length 6, dropped, no vendor > Fri Oct 6 16:29:01 2000: Received-Accounting: 104/8 from > MAX2012.univ-perp.fr port 20101 $"339355054" Stop > Fri Oct 6 16:29:01 2000: Accounting: 104/8 from MAX2012.univ-perp.fr port > 20101 $"339355054" Stop - OK -- total 0, holding 0 > > > How can i solve unknown attributes 255, 120 121 ? > > In my dictionary file these attributes are known : > > Ascend.attr Ascend-Modem-PortNo 120 integer (*, 0, > NOENCAPS) > Ascend.attr Ascend-Modem-SlotNo 121 integer (*, 0, > NOENCAPS) > Ascend.attr Ascend-Modem-ShelfNo 122 integer (*, 0, > NOENCAPS) > > > Any idea ? > > Many thanks in advance. > Stephane BRANCHOUX > > > Stephane.Branchoux@univ-perp.fr > > Tel : 04.68.66.21.24 > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: > *********************************************** Mick Dobra Systems Administrator MTCO Communications 1-800-859-6826 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From rob at raser.com Sat Oct 7 11:13:08 2000 From: rob at raser.com (Rob Servis) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] (ASCEND) MULTIBAND MAX-HP Message-ID: <014b01c03079$7bdf9440$de02a8c0@private> What is the difference between a "Multiband MAX-HP" and any normal Max 4000? ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From rob at raser.com Sat Oct 7 11:13:08 2000 From: rob at raser.com (Rob Servis) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] (ASCEND) MULTIBAND MAX-HP Message-ID: <014b01c03079$7bdf9440$de02a8c0@private> What is the difference between a "Multiband MAX-HP" and any normal Max 4000? ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From websfinest-amateursites-help at nkvc.net Sat Oct 7 14:33:44 2000 From: websfinest-amateursites-help at nkvc.net (websfinest-amateursites-help@nkvc.net) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] (ASCEND) confirm subscribe to websfinest-amateursites@nkvc.net Message-ID: <970947224.26180.ezmlm@nkvc.net> This is NOT unsolicited mail. Your request for websfinest-amateursites has been approved! Click on the link below to receive websfinest-amateursites. mailto:websfinest-amateursites-sc.970947224.lknkpjejncdbgijngeko-ascend-users=bungi.com@nkvc.net This confirmation is for your protection. If you do not want to receive websfinest-amateursites, please delete this message. --- Enclosed is a copy of the request received. Return-Path: Received: (qmail 26171 invoked by uid 99); 7 Oct 2000 19:33:44 -0000 Date: 7 Oct 2000 19:33:44 -0000 Message-ID: <20001007193344.26170.qmail@ml1.nkvc.net> From: anonymous@ml1.nkvc.net Cc: recipient list not shown: ; ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From websfinest-amateursites-help at nkvc.net Sat Oct 7 14:33:44 2000 From: websfinest-amateursites-help at nkvc.net (websfinest-amateursites-help@nkvc.net) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] (ASCEND) confirm subscribe to websfinest-amateursites@nkvc.net Message-ID: <970947224.26180.ezmlm@nkvc.net> This is NOT unsolicited mail. Your request for websfinest-amateursites has been approved! Click on the link below to receive websfinest-amateursites. mailto:websfinest-amateursites-sc.970947224.lknkpjejncdbgijngeko-ascend-users=bungi.com@nkvc.net This confirmation is for your protection. If you do not want to receive websfinest-amateursites, please delete this message. --- Enclosed is a copy of the request received. Return-Path: Received: (qmail 26171 invoked by uid 99); 7 Oct 2000 19:33:44 -0000 Date: 7 Oct 2000 19:33:44 -0000 Message-ID: <20001007193344.26170.qmail@ml1.nkvc.net> From: anonymous@ml1.nkvc.net Cc: recipient list not shown: ; ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Mon Oct 9 11:41:37 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] (ASCEND) Re: TNT HDLC2, HDLC2-ec cards In-Reply-To: <200010070545.WAA05390@max.bungi.com> References: <200010070545.WAA05390@max.bungi.com> Message-ID: >From: Mick Dobra > >Anyone know the difference between hdlc2 and hdlc2-ec cards. Put a hdlc2-ec >card in a tnt and it just sits in reset state. The HDLC2-ec card supports hardware encryption and requires a different software load than the other HDLC cards. Make sure you've got the image for that card loaded (use dircode) so the TNT can boot the card. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From martin at arkaden.net Mon Oct 9 10:44:06 2000 From: martin at arkaden.net (Clemens Martin) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] (ASCEND) Session-Timeout (27) Ascend-Maximum-Time Message-ID: Mail auf Viren ueberprueft Hi, We were using the above mentioned Radius Attributes to end a users session under Taos 7.2. After upgrading to 8.0.2 neither Attribute seems to work anymore. The call still stays connected. Any idea how we get the original behaviour back or where to look at? kind regards C. Martin Dr.-Ing. Clemens Martin martin@arkaden.net ebner & martin informationssysteme gmbh www.arkaden.net Furtherhofstr. 1 fon +49 2131 527393-14 D 41462 Neuss fax +49 2131 527393-87 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From martin at arkaden.net Mon Oct 9 10:44:06 2000 From: martin at arkaden.net (Clemens Martin) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] (ASCEND) Session-Timeout (27) Ascend-Maximum-Time Message-ID: Mail auf Viren ueberprueft Hi, We were using the above mentioned Radius Attributes to end a users session under Taos 7.2. After upgrading to 8.0.2 neither Attribute seems to work anymore. The call still stays connected. Any idea how we get the original behaviour back or where to look at? kind regards C. Martin Dr.-Ing. Clemens Martin martin@arkaden.net ebner & martin informationssysteme gmbh www.arkaden.net Furtherhofstr. 1 fon +49 2131 527393-14 D 41462 Neuss fax +49 2131 527393-87 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Mon Oct 9 11:41:37 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] (ASCEND) Re: TNT HDLC2, HDLC2-ec cards In-Reply-To: <200010070545.WAA05390@max.bungi.com> References: <200010070545.WAA05390@max.bungi.com> Message-ID: >From: Mick Dobra > >Anyone know the difference between hdlc2 and hdlc2-ec cards. Put a hdlc2-ec >card in a tnt and it just sits in reset state. The HDLC2-ec card supports hardware encryption and requires a different software load than the other HDLC cards. Make sure you've got the image for that card loaded (use dircode) so the TNT can boot the card. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From galhardo at svn.com.br Mon Oct 9 02:52:40 2000 From: galhardo at svn.com.br (Alex Galhardo) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] (ASCEND) Problems with E1 chanallized MAX TNT Message-ID: Hi, We have many dedicated circuits in channalized E1. These circuits are frequently going down in different moments and don't return until the TNT resets. This was a bug in 7.0.x version and was already corrected. My current version 8.0.x. We don't know why it's happening. Does anyone know what might be happening ? What can we do to fix this problem ? With my best regards, -- Alex Galhardo PSINet - Bahia - Brasil Field Services galhardoa@psi.com Visite www.psinet.com.br - PSINet "The Internet Super Carrier" -------------------------------------------------------------- ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From galhardo at svn.com.br Mon Oct 9 02:52:40 2000 From: galhardo at svn.com.br (Alex Galhardo) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] (ASCEND) Problems with E1 chanallized MAX TNT Message-ID: Hi, We have many dedicated circuits in channalized E1. These circuits are frequently going down in different moments and don't return until the TNT resets. This was a bug in 7.0.x version and was already corrected. My current version 8.0.x. We don't know why it's happening. Does anyone know what might be happening ? What can we do to fix this problem ? With my best regards, -- Alex Galhardo PSINet - Bahia - Brasil Field Services galhardoa@psi.com Visite www.psinet.com.br - PSINet "The Internet Super Carrier" -------------------------------------------------------------- ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From scott at millenniumsolutions.net Mon Oct 9 17:42:25 2000 From: scott at millenniumsolutions.net (Scott Woodland) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] (ASCEND) FS: Ascend MAX4048's Message-ID: <017501c03242$326e65a0$cf582cd0@new2u.net> Hello All, I currently have a few Ascend MAX4048 that each have (3) MX-SL-16MOD-S56K cards in them. Selling complete units or will separate cards and chassis. These units are tested and refurbished and we offer a 90 Day warranty on them. Great Prices!!! Please email me or call me directly if you have any interest. We carry other Ascend products as well. If you need something...just ask. Regards, Scott Woodland scott@millenniumsolutions.net Millennium Solutions Group, Inc. 575 Menlo Drive, Suite 4 Rocklin, CA 95765 Ph. 888-801-2001 or 916-630-2001 Ext.230 Fax 916-630-2000 www.millenniumsolutions.net ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From scott at millenniumsolutions.net Mon Oct 9 17:42:25 2000 From: scott at millenniumsolutions.net (Scott Woodland) Date: Tue Jan 18 13:59:26 2005 Subject: [Ascend] (ASCEND) FS: Ascend MAX4048's Message-ID: <017501c03242$326e65a0$cf582cd0@new2u.net> Hello All, I currently have a few Ascend MAX4048 that each have (3) MX-SL-16MOD-S56K cards in them. Selling complete units or will separate cards and chassis. These units are tested and refurbished and we offer a 90 Day warranty on them. Great Prices!!! Please email me or call me directly if you have any interest. We carry other Ascend products as well. If you need something...just ask. Regards, Scott Woodland scott@millenniumsolutions.net Millennium Solutions Group, Inc. 575 Menlo Drive, Suite 4 Rocklin, CA 95765 Ph. 888-801-2001 or 916-630-2001 Ext.230 Fax 916-630-2000 www.millenniumsolutions.net ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From roddy at satlink.com.au Tue Oct 10 06:33:31 2000 From: roddy at satlink.com.au (Roddy Strachan) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] (ASCEND) Empty Logins in radius with max? Message-ID: <000701c032ad$ebda09c0$20de13cb@Roddy> Hi, Just wondering if anyone has any ideas why the Max is recording empty radius entries, which is causing havoc with our billing system please see examples : Mon Oct 9 09:06:52 2000 NAS-IP-Address = x.x.x.x NAS-Port-Id = 20116 NAS-Port-Type = Async Acct-Status-Type = Stop Acct-Delay-Time = 0 Acct-Session-Id = "339585301" Ascend-Disconnect-Cause = 185 Ascend-Connect-Progress = 31 Ascend-Xmit-Rate = 0 Ascend-Data-Rate = 0 Ascend-PreSession-Time = 26 Ascend-Pre-Input-Octets = 0 Ascend-Pre-Output-Octets = 0 Ascend-Pre-Input-Packets = 0 Ascend-Pre-Output-Packets = 0 Ascend-Modem-PortNo = 15 Ascend-Modem-SlotNo = 4 Called-Station-Id = "97881000" Timestamp = 971046412 Mon Oct 9 10:15:10 2000 NAS-IP-Address = x.x.x.x NAS-Port-Id = 20110 NAS-Port-Type = Async Acct-Status-Type = Stop Acct-Delay-Time = 0 Acct-Session-Id = "339585322" Ascend-Disconnect-Cause = 185 Ascend-Connect-Progress = 31 Ascend-Xmit-Rate = 0 Ascend-Data-Rate = 0 Ascend-PreSession-Time = 39 Ascend-Pre-Input-Octets = 0 Ascend-Pre-Output-Octets = 0 Ascend-Pre-Input-Packets = 0 Ascend-Pre-Output-Packets = 0 Ascend-Modem-PortNo = 4 Ascend-Modem-SlotNo = 4 Called-Station-Id = "97881000" Timestamp = 971050510 And so on... The ciscos and Pm2 we have doesn't do it, just the max's, all running Cistron Radius 1.6.1 Any configuration settings needed to be changed on the max's THanks --- Cheers, R. Strachan Satlink Internet Services Pty Ltd. Ph. +61-3-9775-2600 Fax. +61-3-9775-2456 Email. roddy@satlink.com.au rodstrach@hotmail.com rodster@unimobile.com (To Send email to Mobile) ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From roddy at satlink.com.au Tue Oct 10 06:33:31 2000 From: roddy at satlink.com.au (Roddy Strachan) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] (ASCEND) Empty Logins in radius with max? Message-ID: <000701c032ad$ebda09c0$20de13cb@Roddy> Hi, Just wondering if anyone has any ideas why the Max is recording empty radius entries, which is causing havoc with our billing system please see examples : Mon Oct 9 09:06:52 2000 NAS-IP-Address = x.x.x.x NAS-Port-Id = 20116 NAS-Port-Type = Async Acct-Status-Type = Stop Acct-Delay-Time = 0 Acct-Session-Id = "339585301" Ascend-Disconnect-Cause = 185 Ascend-Connect-Progress = 31 Ascend-Xmit-Rate = 0 Ascend-Data-Rate = 0 Ascend-PreSession-Time = 26 Ascend-Pre-Input-Octets = 0 Ascend-Pre-Output-Octets = 0 Ascend-Pre-Input-Packets = 0 Ascend-Pre-Output-Packets = 0 Ascend-Modem-PortNo = 15 Ascend-Modem-SlotNo = 4 Called-Station-Id = "97881000" Timestamp = 971046412 Mon Oct 9 10:15:10 2000 NAS-IP-Address = x.x.x.x NAS-Port-Id = 20110 NAS-Port-Type = Async Acct-Status-Type = Stop Acct-Delay-Time = 0 Acct-Session-Id = "339585322" Ascend-Disconnect-Cause = 185 Ascend-Connect-Progress = 31 Ascend-Xmit-Rate = 0 Ascend-Data-Rate = 0 Ascend-PreSession-Time = 39 Ascend-Pre-Input-Octets = 0 Ascend-Pre-Output-Octets = 0 Ascend-Pre-Input-Packets = 0 Ascend-Pre-Output-Packets = 0 Ascend-Modem-PortNo = 4 Ascend-Modem-SlotNo = 4 Called-Station-Id = "97881000" Timestamp = 971050510 And so on... The ciscos and Pm2 we have doesn't do it, just the max's, all running Cistron Radius 1.6.1 Any configuration settings needed to be changed on the max's THanks --- Cheers, R. Strachan Satlink Internet Services Pty Ltd. Ph. +61-3-9775-2600 Fax. +61-3-9775-2456 Email. roddy@satlink.com.au rodstrach@hotmail.com rodster@unimobile.com (To Send email to Mobile) ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From troy at psknet.com Tue Oct 10 08:03:28 2000 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] RE: (ASCEND) Empty Logins in radius with max? In-Reply-To: <000701c032ad$ebda09c0$20de13cb@Roddy> Message-ID: These particular records are showing you that your customer is having a problem getting connected. Note the Connect Progress and Disconnect Cause. In this case, there appears to be a problem with a phoneline or modem. If you have CLID enabled on your PRI/T1, you could use this as a wonderful helpdesk tool. Our customers, for example, can call in, give us their phone number, and we can read from the radius logs (which are in SQL) and tell the customer almost exactly why they're having problems. As for your billing software, tell it to ignore records without usernames. Without that username, there's nothing else it can do. If it really bothers you, and you don't want these, log into your max, go to ethernet, mod config, Accounting, and set "Allow Stop Only" to No. -- Troy Settle Pulaski Networks 540.994.4254 ** -----Original Message----- ** From: owner-ascend-users@max.bungi.com ** [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Roddy Strachan ** Sent: Tuesday, October 10, 2000 7:34 AM ** To: ascend ** Subject: (ASCEND) Empty Logins in radius with max? ** ** ** Hi, ** Just wondering if anyone has any ideas why the Max is ** recording empty ** radius entries, which is causing havoc with our billing ** system please see ** examples : ** ** ** Mon Oct 9 09:06:52 2000 ** NAS-IP-Address = x.x.x.x ** NAS-Port-Id = 20116 ** NAS-Port-Type = Async ** Acct-Status-Type = Stop ** Acct-Delay-Time = 0 ** Acct-Session-Id = "339585301" ** Ascend-Disconnect-Cause = 185 ** Ascend-Connect-Progress = 31 ** Ascend-Xmit-Rate = 0 ** Ascend-Data-Rate = 0 ** Ascend-PreSession-Time = 26 ** Ascend-Pre-Input-Octets = 0 ** Ascend-Pre-Output-Octets = 0 ** Ascend-Pre-Input-Packets = 0 ** Ascend-Pre-Output-Packets = 0 ** Ascend-Modem-PortNo = 15 ** Ascend-Modem-SlotNo = 4 ** Called-Station-Id = "97881000" ** Timestamp = 971046412 ** ** Mon Oct 9 10:15:10 2000 ** NAS-IP-Address = x.x.x.x ** NAS-Port-Id = 20110 ** NAS-Port-Type = Async ** Acct-Status-Type = Stop ** Acct-Delay-Time = 0 ** Acct-Session-Id = "339585322" ** Ascend-Disconnect-Cause = 185 ** Ascend-Connect-Progress = 31 ** Ascend-Xmit-Rate = 0 ** Ascend-Data-Rate = 0 ** Ascend-PreSession-Time = 39 ** Ascend-Pre-Input-Octets = 0 ** Ascend-Pre-Output-Octets = 0 ** Ascend-Pre-Input-Packets = 0 ** Ascend-Pre-Output-Packets = 0 ** Ascend-Modem-PortNo = 4 ** Ascend-Modem-SlotNo = 4 ** Called-Station-Id = "97881000" ** Timestamp = 971050510 ** ** ** And so on... ** ** The ciscos and Pm2 we have doesn't do it, just the max's, all running ** Cistron Radius 1.6.1 ** ** Any configuration settings needed to be changed on the max's ** ** THanks ** ** --- ** Cheers, ** ** R. Strachan ** Satlink Internet Services Pty Ltd. ** Ph. +61-3-9775-2600 ** Fax. +61-3-9775-2456 ** Email. roddy@satlink.com.au ** rodstrach@hotmail.com ** rodster@unimobile.com (To Send email to Mobile) ** ** ** ++ Ascend Users Mailing List ++ ** To unsubscribe: send unsubscribe to ** ascend-users-request@bungi.com ** To get FAQ'd: ** ** ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From troy at psknet.com Tue Oct 10 08:03:28 2000 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] RE: (ASCEND) Empty Logins in radius with max? In-Reply-To: <000701c032ad$ebda09c0$20de13cb@Roddy> Message-ID: These particular records are showing you that your customer is having a problem getting connected. Note the Connect Progress and Disconnect Cause. In this case, there appears to be a problem with a phoneline or modem. If you have CLID enabled on your PRI/T1, you could use this as a wonderful helpdesk tool. Our customers, for example, can call in, give us their phone number, and we can read from the radius logs (which are in SQL) and tell the customer almost exactly why they're having problems. As for your billing software, tell it to ignore records without usernames. Without that username, there's nothing else it can do. If it really bothers you, and you don't want these, log into your max, go to ethernet, mod config, Accounting, and set "Allow Stop Only" to No. -- Troy Settle Pulaski Networks 540.994.4254 ** -----Original Message----- ** From: owner-ascend-users@max.bungi.com ** [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Roddy Strachan ** Sent: Tuesday, October 10, 2000 7:34 AM ** To: ascend ** Subject: (ASCEND) Empty Logins in radius with max? ** ** ** Hi, ** Just wondering if anyone has any ideas why the Max is ** recording empty ** radius entries, which is causing havoc with our billing ** system please see ** examples : ** ** ** Mon Oct 9 09:06:52 2000 ** NAS-IP-Address = x.x.x.x ** NAS-Port-Id = 20116 ** NAS-Port-Type = Async ** Acct-Status-Type = Stop ** Acct-Delay-Time = 0 ** Acct-Session-Id = "339585301" ** Ascend-Disconnect-Cause = 185 ** Ascend-Connect-Progress = 31 ** Ascend-Xmit-Rate = 0 ** Ascend-Data-Rate = 0 ** Ascend-PreSession-Time = 26 ** Ascend-Pre-Input-Octets = 0 ** Ascend-Pre-Output-Octets = 0 ** Ascend-Pre-Input-Packets = 0 ** Ascend-Pre-Output-Packets = 0 ** Ascend-Modem-PortNo = 15 ** Ascend-Modem-SlotNo = 4 ** Called-Station-Id = "97881000" ** Timestamp = 971046412 ** ** Mon Oct 9 10:15:10 2000 ** NAS-IP-Address = x.x.x.x ** NAS-Port-Id = 20110 ** NAS-Port-Type = Async ** Acct-Status-Type = Stop ** Acct-Delay-Time = 0 ** Acct-Session-Id = "339585322" ** Ascend-Disconnect-Cause = 185 ** Ascend-Connect-Progress = 31 ** Ascend-Xmit-Rate = 0 ** Ascend-Data-Rate = 0 ** Ascend-PreSession-Time = 39 ** Ascend-Pre-Input-Octets = 0 ** Ascend-Pre-Output-Octets = 0 ** Ascend-Pre-Input-Packets = 0 ** Ascend-Pre-Output-Packets = 0 ** Ascend-Modem-PortNo = 4 ** Ascend-Modem-SlotNo = 4 ** Called-Station-Id = "97881000" ** Timestamp = 971050510 ** ** ** And so on... ** ** The ciscos and Pm2 we have doesn't do it, just the max's, all running ** Cistron Radius 1.6.1 ** ** Any configuration settings needed to be changed on the max's ** ** THanks ** ** --- ** Cheers, ** ** R. Strachan ** Satlink Internet Services Pty Ltd. ** Ph. +61-3-9775-2600 ** Fax. +61-3-9775-2456 ** Email. roddy@satlink.com.au ** rodstrach@hotmail.com ** rodster@unimobile.com (To Send email to Mobile) ** ** ** ++ Ascend Users Mailing List ++ ** To unsubscribe: send unsubscribe to ** ascend-users-request@bungi.com ** To get FAQ'd: ** ** ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From roddy at satlink.com.au Wed Oct 11 01:47:50 2000 From: roddy at satlink.com.au (Roddy Strachan) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] (ASCEND) Good stable Firmware (Max 6k)? Message-ID: <017901c0334f$2f3aa7a0$20de13cb@Roddy> Hi, Just wondering what everyone is running on there Max 6k boxes? What firmware versions? I am currently running 7.2.3+ at the moment, however some people are complaining of bad connect speeds etc, would it be worth while to upgrade to a newer release? If so what? --- Cheers, R. Strachan Satlink Internet Services Pty Ltd. Ph. +61-3-9775-2600 Fax. +61-3-9775-2456 Email. roddy@satlink.com.au rodstrach@hotmail.com rodster@unimobile.com (To Send email to Mobile) ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From roddy at satlink.com.au Wed Oct 11 01:47:50 2000 From: roddy at satlink.com.au (Roddy Strachan) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] (ASCEND) Good stable Firmware (Max 6k)? Message-ID: <017901c0334f$2f3aa7a0$20de13cb@Roddy> Hi, Just wondering what everyone is running on there Max 6k boxes? What firmware versions? I am currently running 7.2.3+ at the moment, however some people are complaining of bad connect speeds etc, would it be worth while to upgrade to a newer release? If so what? --- Cheers, R. Strachan Satlink Internet Services Pty Ltd. Ph. +61-3-9775-2600 Fax. +61-3-9775-2456 Email. roddy@satlink.com.au rodstrach@hotmail.com rodster@unimobile.com (To Send email to Mobile) ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From maxed_out_user at hotmail.com Wed Oct 11 02:53:20 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] Re: (ASCEND) ascend acl's Message-ID: Far as I know, it works great on a Max 6000 (haven't worked with it enough on a TNT though; sorry). There is concern about performance issues when every packets has to be evaluated through a filter, but it is very minimal and since the Max 6000s only run T-1s, it shouldn't be a problem. Hi, We are wanting to setup a service where a dialin account can only access, a specific server or group of servers (local and on the internet). My inital reaction was to implement ACL's and define them in the customers radius profile, however, some concern was raised about using ACL's on Ascend gear. Does anyone have any comments or experiences with such implementations? How does it work on a TNT/6000 when assigning on a fairly large scale? Thanks _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From maxed_out_user at hotmail.com Wed Oct 11 03:04:54 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] Re: (ASCEND) Max 6048 finger not working Message-ID: I think I have seen others on this list report finger not working on 8.0.2. It really sounds like a bug so you might want to report it Lucent support. Do you see TCP port 79 being listened on if you go into the term serv and issue a "show tcp connection" command? I use finger on both of my Max 4048's with no problem. A 6048 loaner I have is refusing finger requests, even though it's set to finger=yes under Ethernet-> Mod Config. I get this: Finger online user list denied. running TAOS 8.0.2 Clues appreciated... _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From maxed_out_user at hotmail.com Wed Oct 11 02:53:20 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] Re: (ASCEND) ascend acl's Message-ID: Far as I know, it works great on a Max 6000 (haven't worked with it enough on a TNT though; sorry). There is concern about performance issues when every packets has to be evaluated through a filter, but it is very minimal and since the Max 6000s only run T-1s, it shouldn't be a problem. Hi, We are wanting to setup a service where a dialin account can only access, a specific server or group of servers (local and on the internet). My inital reaction was to implement ACL's and define them in the customers radius profile, however, some concern was raised about using ACL's on Ascend gear. Does anyone have any comments or experiences with such implementations? How does it work on a TNT/6000 when assigning on a fairly large scale? Thanks _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From maxed_out_user at hotmail.com Wed Oct 11 03:04:54 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] Re: (ASCEND) Max 6048 finger not working Message-ID: I think I have seen others on this list report finger not working on 8.0.2. It really sounds like a bug so you might want to report it Lucent support. Do you see TCP port 79 being listened on if you go into the term serv and issue a "show tcp connection" command? I use finger on both of my Max 4048's with no problem. A 6048 loaner I have is refusing finger requests, even though it's set to finger=yes under Ethernet-> Mod Config. I get this: Finger online user list denied. running TAOS 8.0.2 Clues appreciated... _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From maxed_out_user at hotmail.com Wed Oct 11 02:49:24 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] Re: (ASCEND) Max 4048 static IP users not routing Message-ID: The RADIUS profile looks ok as long as Framed-IP-Address and Framed-Netmask (you sure you don't mean Framed-IP-Netmask) send back the correct attribute number to the Max (can't recall what the numbers are off the top of my head since it's late at night here). Provided the route appears in the routing table (you need to issue a "show ip route" in the term serv and check this after the client dials in), it would most likely seem that the problem is in the OSPF configuration. You need to enable ASBR so that the static route for the dialin user will get imported into the OSPF link state database (as an LSA Type 5). This is necessary because OSPF considers static routes external to the autonomous system and the ASBR is the router responsible for importing externals into OSPF. Once you set ASBR=Yes and "exit and accept" the changes, you must reboot the Max for the OSPF change to take affect (one small but important piece of knowledge you should know about Ascends and their implementations of OSPF). If this doesn't work, I don't know what will without more info. I have a couple of Cisco AS5248s and 2 Max 4048s If a user with a static IP dials into the Cisco, he gets around fine. If he dials into the Max, he can't get anywhere, nor can I traceroute to him. I'm running Cistron radius 1.6.1 with the following type of entry in my /etc/raddb/users file: joeuser Auth-Type = System, Simultaneous-Use = 1 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = 1.2.3.4 Framed-Netmask=255.255.255.255 I know I had this working at one point, but something's changed since then and it's not working. Running OSPF, ASBR=no. Any ideas? _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From maxed_out_user at hotmail.com Wed Oct 11 02:49:24 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] Re: (ASCEND) Max 4048 static IP users not routing Message-ID: The RADIUS profile looks ok as long as Framed-IP-Address and Framed-Netmask (you sure you don't mean Framed-IP-Netmask) send back the correct attribute number to the Max (can't recall what the numbers are off the top of my head since it's late at night here). Provided the route appears in the routing table (you need to issue a "show ip route" in the term serv and check this after the client dials in), it would most likely seem that the problem is in the OSPF configuration. You need to enable ASBR so that the static route for the dialin user will get imported into the OSPF link state database (as an LSA Type 5). This is necessary because OSPF considers static routes external to the autonomous system and the ASBR is the router responsible for importing externals into OSPF. Once you set ASBR=Yes and "exit and accept" the changes, you must reboot the Max for the OSPF change to take affect (one small but important piece of knowledge you should know about Ascends and their implementations of OSPF). If this doesn't work, I don't know what will without more info. I have a couple of Cisco AS5248s and 2 Max 4048s If a user with a static IP dials into the Cisco, he gets around fine. If he dials into the Max, he can't get anywhere, nor can I traceroute to him. I'm running Cistron radius 1.6.1 with the following type of entry in my /etc/raddb/users file: joeuser Auth-Type = System, Simultaneous-Use = 1 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = 1.2.3.4 Framed-Netmask=255.255.255.255 I know I had this working at one point, but something's changed since then and it's not working. Running OSPF, ASBR=no. Any ideas? _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From maxed_out_user at hotmail.com Wed Oct 11 02:59:23 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] Re: (ASCEND) MULTIBAND MAX-HP Message-ID: A Multiband MAX-HP (a.k.a. Max Classic or Max 1600) is the original Max that only had 2 onboard physical T-1 WAN ports. It also had onboard host/dual ports used for videoconferencing. It did not have an Ethernet port (you had to buy an optional Ethernet slot card). It was basically like a Multiband Plus (inverse mux used mainly for videoconferencing), but with expansion slots so you could add an Ethernet or other slot cards. A Max 4000 has onboard Ethernet but no host/dual port onboard. It was basically geared more as a remote access box. What is the difference between a "Multiband MAX-HP" and any normal Max 4000? _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From maxed_out_user at hotmail.com Wed Oct 11 02:59:23 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] Re: (ASCEND) MULTIBAND MAX-HP Message-ID: A Multiband MAX-HP (a.k.a. Max Classic or Max 1600) is the original Max that only had 2 onboard physical T-1 WAN ports. It also had onboard host/dual ports used for videoconferencing. It did not have an Ethernet port (you had to buy an optional Ethernet slot card). It was basically like a Multiband Plus (inverse mux used mainly for videoconferencing), but with expansion slots so you could add an Ethernet or other slot cards. A Max 4000 has onboard Ethernet but no host/dual port onboard. It was basically geared more as a remote access box. What is the difference between a "Multiband MAX-HP" and any normal Max 4000? _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From boris at bulnet.bg Wed Oct 11 07:53:33 2000 From: boris at bulnet.bg (Boris Basmadjiev) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] (ASCEND) WTB: 12-modem v.34 cards Message-ID: <39E462CD.E4BDA74E@bulnet.bg> Hi guys - i need to buy a bunch of the old 12-modem v.34 cards for the Max 4000 chassis. RGDS, Boris B. boris@bulnet.bg ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From boris at bulnet.bg Wed Oct 11 07:53:33 2000 From: boris at bulnet.bg (Boris Basmadjiev) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] (ASCEND) WTB: 12-modem v.34 cards Message-ID: <39E462CD.E4BDA74E@bulnet.bg> Hi guys - i need to buy a bunch of the old 12-modem v.34 cards for the Max 4000 chassis. RGDS, Boris B. boris@bulnet.bg ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From Edwin_Everett at cargill.com Wed Oct 11 11:14:36 2000 From: Edwin_Everett at cargill.com (Edwin_Everett@cargill.com) Date: Tue Jan 18 13:59:27 2005 Subject: [Ascend] (ASCEND) IntragyDeskDial Support for Window 2K Message-ID: I would like to ask everyone out there if anybody else is using Intragy for the Deskdial product. This is a modem pooling (port redirection) feature that uses the Maxen to dial out to the business concerns that employees may have. As we are gearing up for Windows 2000 rollout, we have been told that the Intragy product is not available for Windows 2000 and there looks to be no interest by the customers to see this happen. I have many users that are actively moving to Windows 2000 and would like to hear ANY modem pooling alternatives that people are using for W2k. Since Lucent won't step up I need your help to quickly find an answer. Thanks very much. Edwin Everett Sr. IT Analyst Cargill, Inc PS Is anybody else having trouble finding a support path for the Ascend MAX line as a result of the Lucent/Avaya Split? Feel free to post about this mess as well. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From Edwin_Everett at cargill.com Wed Oct 11 11:14:36 2000 From: Edwin_Everett at cargill.com (Edwin_Everett@cargill.com) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] (ASCEND) IntragyDeskDial Support for Window 2K Message-ID: I would like to ask everyone out there if anybody else is using Intragy for the Deskdial product. This is a modem pooling (port redirection) feature that uses the Maxen to dial out to the business concerns that employees may have. As we are gearing up for Windows 2000 rollout, we have been told that the Intragy product is not available for Windows 2000 and there looks to be no interest by the customers to see this happen. I have many users that are actively moving to Windows 2000 and would like to hear ANY modem pooling alternatives that people are using for W2k. Since Lucent won't step up I need your help to quickly find an answer. Thanks very much. Edwin Everett Sr. IT Analyst Cargill, Inc PS Is anybody else having trouble finding a support path for the Ascend MAX line as a result of the Lucent/Avaya Split? Feel free to post about this mess as well. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From ascend_vet at yahoo.com Thu Oct 12 00:16:06 2000 From: ascend_vet at yahoo.com (ascend veteran) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] Re: (ASCEND) IntragyDeskDial Support for Window 2K Message-ID: <20001012051606.3418.qmail@web6404.mail.yahoo.com> --- Edwin_Everett@cargill.com wrote: > > PS Is anybody else having trouble finding a support > path for the Ascend > MAX line as a result of the Lucent/Avaya Split? Feel > free to post about > this mess as well. Don't understand the question...what has Avaya got to do with the MAX products? What has Avaya got to do with ANYTHING from Ascend for that matter? ===== Ascend Veteran ascend_vet@yahoo.com ascend_vet@hotmail.com __________________________________________________ Do You Yahoo!? Get Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From ascend_vet at yahoo.com Thu Oct 12 00:16:06 2000 From: ascend_vet at yahoo.com (ascend veteran) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] Re: (ASCEND) IntragyDeskDial Support for Window 2K Message-ID: <20001012051606.3418.qmail@web6404.mail.yahoo.com> --- Edwin_Everett@cargill.com wrote: > > PS Is anybody else having trouble finding a support > path for the Ascend > MAX line as a result of the Lucent/Avaya Split? Feel > free to post about > this mess as well. Don't understand the question...what has Avaya got to do with the MAX products? What has Avaya got to do with ANYTHING from Ascend for that matter? ===== Ascend Veteran ascend_vet@yahoo.com ascend_vet@hotmail.com __________________________________________________ Do You Yahoo!? Get Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From Edwin_Everett at cargill.com Thu Oct 12 09:24:58 2000 From: Edwin_Everett at cargill.com (Edwin_Everett@cargill.com) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] RE: Re: (ASCEND) IntragyDeskDial Support for Window 2K Message-ID: Thats exactly the point. Avaya reps tried to get in the middle of max support discussions we're having and noone is sure, not even them, who is to support us. All I want is a direction to go with my Deskdial userbase who is being dropped at the door to Windows 2K. The TAC doesn't even know what Deskdial is. Any other port-redirection software that can provide this service? -----Original Message----- From: ascend_vet@yahoo.com [mailto:ascend_vet@yahoo.com] Sent: Thursday, October 12, 2000 12:16 AM To: everett, edwin /hdqt; ascend-users@bungi.com Subject: FW: Re: (ASCEND) IntragyDeskDial Support for Window 2K --- Edwin_Everett@cargill.com wrote: > > PS Is anybody else having trouble finding a support > path for the Ascend > MAX line as a result of the Lucent/Avaya Split? Feel > free to post about > this mess as well. Don't understand the question...what has Avaya got to do with the MAX products? What has Avaya got to do with ANYTHING from Ascend for that matter? ===== Ascend Veteran ascend_vet@yahoo.com ascend_vet@hotmail.com __________________________________________________ Do You Yahoo!? Get Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: -------------- next part -------------- A non-text attachment was scrubbed... Name: BDY.RTF Type: application/rtf Size: 1813 bytes Desc: not available Url : http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20001012/52f22fc3/BDY.rtf From tom at ispstuff.com.bungi.com Thu Oct 12 09:42:09 2000 From: tom at ispstuff.com.bungi.com (ISPstuff) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] (ASCEND) FS: TNT 48 port single slot 56k modem cards Message-ID: <3.0.3.32.20001012094209.010fd11c@mail.icd.com> Clearing out my spare TNT modem cards. These are the new single slot cards and give twice the density of the double slot cards. Special to the Ascend list - $3900 each obo. Other Ascend spares can be seen at: http://www.icd.com/ascend/ Calls at 815-968-9888 Tom ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From Laurie at MSIC.com Thu Oct 12 09:03:41 2000 From: Laurie at MSIC.com (Laurie Torgersen) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] (ASCEND) WTB: TNT MX-SL-48MOD-SC Message-ID: <4EC02BCEA777D311B286009027B0DBF58EEB3D@thunder.msic.com> I have a need for (7) single slot cards. Please call email with pricing. Thanks, Laurie ******************************************** Laurie Torgersen National Sales Account Executive MSI Communications 7 Waterloo Rd. Stanhope,N.J. 07874 V#973-347-3349 ext.219 F#973-347-7176 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tom at ispstuff.com.bungi.com Thu Oct 12 09:42:09 2000 From: tom at ispstuff.com.bungi.com (ISPstuff) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] (ASCEND) FS: TNT 48 port single slot 56k modem cards Message-ID: <3.0.3.32.20001012094209.010fd11c@mail.icd.com> Clearing out my spare TNT modem cards. These are the new single slot cards and give twice the density of the double slot cards. Special to the Ascend list - $3900 each obo. Other Ascend spares can be seen at: http://www.icd.com/ascend/ Calls at 815-968-9888 Tom ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From Edwin_Everett at cargill.com Thu Oct 12 09:24:58 2000 From: Edwin_Everett at cargill.com (Edwin_Everett@cargill.com) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] RE: Re: (ASCEND) IntragyDeskDial Support for Window 2K Message-ID: Thats exactly the point. Avaya reps tried to get in the middle of max support discussions we're having and noone is sure, not even them, who is to support us. All I want is a direction to go with my Deskdial userbase who is being dropped at the door to Windows 2K. The TAC doesn't even know what Deskdial is. Any other port-redirection software that can provide this service? -----Original Message----- From: ascend_vet@yahoo.com [mailto:ascend_vet@yahoo.com] Sent: Thursday, October 12, 2000 12:16 AM To: everett, edwin /hdqt; ascend-users@bungi.com Subject: FW: Re: (ASCEND) IntragyDeskDial Support for Window 2K --- Edwin_Everett@cargill.com wrote: > > PS Is anybody else having trouble finding a support > path for the Ascend > MAX line as a result of the Lucent/Avaya Split? Feel > free to post about > this mess as well. Don't understand the question...what has Avaya got to do with the MAX products? What has Avaya got to do with ANYTHING from Ascend for that matter? ===== Ascend Veteran ascend_vet@yahoo.com ascend_vet@hotmail.com __________________________________________________ Do You Yahoo!? Get Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: -------------- next part -------------- A non-text attachment was scrubbed... Name: BDY.RTF Type: application/rtf Size: 1813 bytes Desc: not available Url : http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20001012/52f22fc3/BDY-0001.rtf From Laurie at MSIC.com Thu Oct 12 09:03:41 2000 From: Laurie at MSIC.com (Laurie Torgersen) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] (ASCEND) WTB: TNT MX-SL-48MOD-SC Message-ID: <4EC02BCEA777D311B286009027B0DBF58EEB3D@thunder.msic.com> I have a need for (7) single slot cards. Please call email with pricing. Thanks, Laurie ******************************************** Laurie Torgersen National Sales Account Executive MSI Communications 7 Waterloo Rd. Stanhope,N.J. 07874 V#973-347-3349 ext.219 F#973-347-7176 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From bill at comstarinc.com Thu Oct 12 11:31:03 2000 From: bill at comstarinc.com (Bill Lunger) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] (ASCEND) FS : TNT-SL-48MOD-S56 modem cards Message-ID: <5.0.0.25.0.20001012110835.00a17080@mail.protocom.com> Currently have 4 of the Ascend TNT 48 port dual slot 56K modem cards, part number TNT-SL-48MOD-S56. Asking $2500/ea. Open to offers. Thanks, Bill Bill Lunger Comstar, Inc. www.comstarinc.com Phone: 952-835-5502 X307 Fax: 952-835-1927 Email: bill@comstarinc.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From bill at comstarinc.com Thu Oct 12 11:31:03 2000 From: bill at comstarinc.com (Bill Lunger) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] (ASCEND) FS : TNT-SL-48MOD-S56 modem cards Message-ID: <5.0.0.25.0.20001012110835.00a17080@mail.protocom.com> Currently have 4 of the Ascend TNT 48 port dual slot 56K modem cards, part number TNT-SL-48MOD-S56. Asking $2500/ea. Open to offers. Thanks, Bill Bill Lunger Comstar, Inc. www.comstarinc.com Phone: 952-835-5502 X307 Fax: 952-835-1927 Email: bill@comstarinc.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Thu Oct 12 13:08:17 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] (ASCEND) Comparing CLID and DNIS Message-ID: Is it possible to use CLID and DNIS to prevent people from calling certain hunt groups from certain NPA-NXXs? I have an 800 number, and (l)users frequently call it even when there's a local number available. I'd like to have a list of area codes and/or exchanges that are served by a local number and block calls to the 800 number from them. Possible? -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From scott at millenniumsolutions.net Thu Oct 12 12:27:34 2000 From: scott at millenniumsolutions.net (Scott Woodland) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] (ASCEND) MAX4048 Message-ID: <009f01c03471$b5e97a60$cf582cd0@new2u.net> We have some Ascend MAX4048's here with 16MOD-S56 cards in them. Please let me know if you need whole units or just chasis or cards. FYI....Our technicial dept is very knowledgable on these units. We might be of assistance if you have a question pertaining to these units. We have some customers looking for Some 6096 units with E1 compatability....please advise if you have any available. We have availability on a large amout of Refurbished Ascend/Lucent equipment....pipeline's, MAX's, TNT's etc. Regards, Scott Woodland Millennium Solutions Group, Inc. 575 Menlo Drive, Suite 4 Rocklin, CA 95765 Ph. 888-801-2001 or 916-630-2001 Ext.230 Fax 916-630-2000 www.millenniumsolutions.net ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Thu Oct 12 13:08:17 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] (ASCEND) Comparing CLID and DNIS Message-ID: Is it possible to use CLID and DNIS to prevent people from calling certain hunt groups from certain NPA-NXXs? I have an 800 number, and (l)users frequently call it even when there's a local number available. I'd like to have a list of area codes and/or exchanges that are served by a local number and block calls to the 800 number from them. Possible? -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From scott at millenniumsolutions.net Thu Oct 12 12:27:34 2000 From: scott at millenniumsolutions.net (Scott Woodland) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] (ASCEND) MAX4048 Message-ID: <009f01c03471$b5e97a60$cf582cd0@new2u.net> We have some Ascend MAX4048's here with 16MOD-S56 cards in them. Please let me know if you need whole units or just chasis or cards. FYI....Our technicial dept is very knowledgable on these units. We might be of assistance if you have a question pertaining to these units. We have some customers looking for Some 6096 units with E1 compatability....please advise if you have any available. We have availability on a large amout of Refurbished Ascend/Lucent equipment....pipeline's, MAX's, TNT's etc. Regards, Scott Woodland Millennium Solutions Group, Inc. 575 Menlo Drive, Suite 4 Rocklin, CA 95765 Ph. 888-801-2001 or 916-630-2001 Ext.230 Fax 916-630-2000 www.millenniumsolutions.net ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tkinnen at lucentradius.com Thu Oct 12 13:52:07 2000 From: tkinnen at lucentradius.com (Thomas C Kinnen) Date: Tue Jan 18 13:59:28 2005 Subject: [Ascend] Re: (ASCEND) Comparing CLID and DNIS References: Message-ID: <39E60857.8A94030F@lucentradius.com> Peter Lalor wrote: > Is it possible to use CLID and DNIS to prevent people from calling > certain hunt groups from certain NPA-NXXs? > > I have an 800 number, and (l)users frequently call it even when > there's a local number available. I'd like to have a list of area > codes and/or exchanges that are served by a local number and block > calls to the 800 number from them. > > Possible? With NavisRadius 3.1 you can build Access control lists for allowing access to specific DNIS. FOr example you can say if the DNIS is 800* then go check a list of ANI numbers to not allow. For example if 555-123-* is a local exchange you could put 555123* in the deny list. -- Thomas C Kinnen - [RADIUS Engineer] - LUCENT Technologies INS "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tkinnen at lucentradius.com Thu Oct 12 13:52:07 2000 From: tkinnen at lucentradius.com (Thomas C Kinnen) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] Re: (ASCEND) Comparing CLID and DNIS References: Message-ID: <39E60857.8A94030F@lucentradius.com> Peter Lalor wrote: > Is it possible to use CLID and DNIS to prevent people from calling > certain hunt groups from certain NPA-NXXs? > > I have an 800 number, and (l)users frequently call it even when > there's a local number available. I'd like to have a list of area > codes and/or exchanges that are served by a local number and block > calls to the 800 number from them. > > Possible? With NavisRadius 3.1 you can build Access control lists for allowing access to specific DNIS. FOr example you can say if the DNIS is 800* then go check a list of ANI numbers to not allow. For example if 555-123-* is a local exchange you could put 555123* in the deny list. -- Thomas C Kinnen - [RADIUS Engineer] - LUCENT Technologies INS "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From vandry at TZoNE.ORG Thu Oct 12 15:41:21 2000 From: vandry at TZoNE.ORG (Phillip Vandry) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] Re: (ASCEND) Comparing CLID and DNIS In-Reply-To: Your message of "Thu, 12 Oct 2000 11:52:07 EDT." <39E60857.8A94030F@lucentradius.com> Message-ID: <200010122041.QAA12252@Iodine.Mlink.NET> > With NavisRadius 3.1 you can build Access control lists for allowing access to > specific DNIS. FOr example you can say if the DNIS is 800* then go check a > list of ANI numbers to not allow. For example if 555-123-* is a local exchange A few months ago, when someone mentionned that what one gets over a PRI was in fact ANI and not plain CLID, I was surprised (since ANI is not supposed to be accessible to customers for obvious security reasons), but I gave the benefit of the doubt. But that I see this I was reminded of that question. I just tested it to find out for sure, and I am confirming that I receive CLID, not ANI, on my PRIs. -Phil ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mike at abccom.com Thu Oct 12 15:48:41 2000 From: mike at abccom.com (Mike Simmons) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] (ASCEND) FS: 2 Ascend Pipeline 400's Message-ID: FOR SALE: 2 Ascend Pipeline 400 M/N PL-1T1-STD Options: Nx56, ISDN 90 day warranty! $1200.00 each Thank you, Mike Simmons ABC Communication Systems, Inc. 441 S. Robson Road Bldg 108 Mesa, Arizona 85210 800-729-6473 ext. 11 480-833-7712 ext. 11 480-964-3909 Fax URL: http://www.abccom.com We accept all major credit cards! We also accept checks by phone! Thank you, Mike Simmons ABC Communication Systems, Inc. 441 S. Robson Road Bldg 108 Mesa, Arizona 85210 800-729-6473 ext. 11 480-833-7712 ext. 11 480-964-3909 Fax URL: http://www.abccom.com We accept all major credit cards! We also accept checks by phone! ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From vandry at TZoNE.ORG Thu Oct 12 15:41:21 2000 From: vandry at TZoNE.ORG (Phillip Vandry) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] Re: (ASCEND) Comparing CLID and DNIS In-Reply-To: Your message of "Thu, 12 Oct 2000 11:52:07 EDT." <39E60857.8A94030F@lucentradius.com> Message-ID: <200010122041.QAA12252@Iodine.Mlink.NET> > With NavisRadius 3.1 you can build Access control lists for allowing access to > specific DNIS. FOr example you can say if the DNIS is 800* then go check a > list of ANI numbers to not allow. For example if 555-123-* is a local exchange A few months ago, when someone mentionned that what one gets over a PRI was in fact ANI and not plain CLID, I was surprised (since ANI is not supposed to be accessible to customers for obvious security reasons), but I gave the benefit of the doubt. But that I see this I was reminded of that question. I just tested it to find out for sure, and I am confirming that I receive CLID, not ANI, on my PRIs. -Phil ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mike at abccom.com Thu Oct 12 15:48:41 2000 From: mike at abccom.com (Mike Simmons) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] (ASCEND) FS: 2 Ascend Pipeline 400's Message-ID: FOR SALE: 2 Ascend Pipeline 400 M/N PL-1T1-STD Options: Nx56, ISDN 90 day warranty! $1200.00 each Thank you, Mike Simmons ABC Communication Systems, Inc. 441 S. Robson Road Bldg 108 Mesa, Arizona 85210 800-729-6473 ext. 11 480-833-7712 ext. 11 480-964-3909 Fax URL: http://www.abccom.com We accept all major credit cards! We also accept checks by phone! Thank you, Mike Simmons ABC Communication Systems, Inc. 441 S. Robson Road Bldg 108 Mesa, Arizona 85210 800-729-6473 ext. 11 480-833-7712 ext. 11 480-964-3909 Fax URL: http://www.abccom.com We accept all major credit cards! We also accept checks by phone! ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tkinnen at lucentradius.com Thu Oct 12 16:28:41 2000 From: tkinnen at lucentradius.com (Thomas C Kinnen) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] Re: (ASCEND) Comparing CLID and DNIS References: <200010122041.QAA12252@Iodine.Mlink.NET> Message-ID: <39E62D09.62D5465B@lucentradius.com> Phillip Vandry wrote: > A few months ago, when someone mentionned that what one gets over a PRI > was in fact ANI and not plain CLID, I was surprised (since ANI is not > supposed to be accessible to customers for obvious security reasons), but > I gave the benefit of the doubt. For what you want to do as long as Called-Station-Id and Calling-Station-Id is reported in the RADIUS packets it is possible to do. -- Thomas C Kinnen - [RADIUS Engineer] - LUCENT Technologies INS "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tkinnen at lucentradius.com Thu Oct 12 16:28:41 2000 From: tkinnen at lucentradius.com (Thomas C Kinnen) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] Re: (ASCEND) Comparing CLID and DNIS References: <200010122041.QAA12252@Iodine.Mlink.NET> Message-ID: <39E62D09.62D5465B@lucentradius.com> Phillip Vandry wrote: > A few months ago, when someone mentionned that what one gets over a PRI > was in fact ANI and not plain CLID, I was surprised (since ANI is not > supposed to be accessible to customers for obvious security reasons), but > I gave the benefit of the doubt. For what you want to do as long as Called-Station-Id and Calling-Station-Id is reported in the RADIUS packets it is possible to do. -- Thomas C Kinnen - [RADIUS Engineer] - LUCENT Technologies INS "All of the opinions stated above are my own and not my employer's, unless they were given to me by my employer" ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jcdutton at lucent.com Sat Oct 14 07:36:11 2000 From: jcdutton at lucent.com (James Courtier-Dutton) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] Re: (ASCEND) Comparing CLID and DNIS References: <200010122041.QAA12252@Iodine.Mlink.NET> Message-ID: <00a201c035db$59ed2e80$1401a8c0@home> Hello I don't know what you get on your PRIs. In the UK, we get CLID and DNIS. ANI is kept inside the SS7. Cheers James ----- Original Message ----- From: "Phillip Vandry" To: Sent: Thursday, October 12, 2000 9:41 PM Subject: Re: (ASCEND) Comparing CLID and DNIS > > With NavisRadius 3.1 you can build Access control lists for allowing access to > > specific DNIS. FOr example you can say if the DNIS is 800* then go check a > > list of ANI numbers to not allow. For example if 555-123-* is a local exchange > > A few months ago, when someone mentionned that what one gets over a PRI > was in fact ANI and not plain CLID, I was surprised (since ANI is not > supposed to be accessible to customers for obvious security reasons), but > I gave the benefit of the doubt. > > But that I see this I was reminded of that question. I just tested it > to find out for sure, and I am confirming that I receive CLID, not ANI, > on my PRIs. > > -Phil > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jcdutton at lucent.com Sat Oct 14 07:36:11 2000 From: jcdutton at lucent.com (James Courtier-Dutton) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] Re: (ASCEND) Comparing CLID and DNIS References: <200010122041.QAA12252@Iodine.Mlink.NET> Message-ID: <00a201c035db$59ed2e80$1401a8c0@home> Hello I don't know what you get on your PRIs. In the UK, we get CLID and DNIS. ANI is kept inside the SS7. Cheers James ----- Original Message ----- From: "Phillip Vandry" To: Sent: Thursday, October 12, 2000 9:41 PM Subject: Re: (ASCEND) Comparing CLID and DNIS > > With NavisRadius 3.1 you can build Access control lists for allowing access to > > specific DNIS. FOr example you can say if the DNIS is 800* then go check a > > list of ANI numbers to not allow. For example if 555-123-* is a local exchange > > A few months ago, when someone mentionned that what one gets over a PRI > was in fact ANI and not plain CLID, I was surprised (since ANI is not > supposed to be accessible to customers for obvious security reasons), but > I gave the benefit of the doubt. > > But that I see this I was reminded of that question. I just tested it > to find out for sure, and I am confirming that I receive CLID, not ANI, > on my PRIs. > > -Phil > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From vnz3 at msn.com Sat Oct 14 18:44:43 2000 From: vnz3 at msn.com (vnz3@msn.com) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] (ASCEND) Stock Pick of the Week Message-ID: <0e9cd3244230ea0CPIMSSMTPU09@email.msn.com> >>> STOCK PICK OF THE WEEK <<< For the week beginning Monday, 10-16-2000 Investment Snapshot - ATTP -- Affordable Telecom http://moneycentral.msn.com/scripts/webquote.dll?iPage=qd&Symbol=attp Target Price: $1.00 Current Price: $.12 Take a close look at this stock, it's going to rise fast! HOUSTON--(BUSINESS WIRE)--Oct. 3, 2000--Affordable Telecommunications Technology Corporation (OTC BB:ATTP) announced today its preliminary third quarter revenues will exceed expectations. Affordable Telecommunications announced preliminary projected revenues of $500,000 for the quarter ending September 30, 2000. Steven H. Bethke, president of Affordable Telecommunications, said, "We are extremely pleased to anticipate a 460% year-over-year increase in revenues, which exceed our expectations. Strong revenue gains indicate we are on track in building our revenue base through strategic marketing arrangements with leaders in the wireless industry." The Company expects to report its finalized quarterly results on or before November 15, 2000. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From vnz3 at msn.com Sat Oct 14 18:44:43 2000 From: vnz3 at msn.com (vnz3@msn.com) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] (ASCEND) Stock Pick of the Week Message-ID: <0e9cd3244230ea0CPIMSSMTPU09@email.msn.com> >>> STOCK PICK OF THE WEEK <<< For the week beginning Monday, 10-16-2000 Investment Snapshot - ATTP -- Affordable Telecom http://moneycentral.msn.com/scripts/webquote.dll?iPage=qd&Symbol=attp Target Price: $1.00 Current Price: $.12 Take a close look at this stock, it's going to rise fast! HOUSTON--(BUSINESS WIRE)--Oct. 3, 2000--Affordable Telecommunications Technology Corporation (OTC BB:ATTP) announced today its preliminary third quarter revenues will exceed expectations. Affordable Telecommunications announced preliminary projected revenues of $500,000 for the quarter ending September 30, 2000. Steven H. Bethke, president of Affordable Telecommunications, said, "We are extremely pleased to anticipate a 460% year-over-year increase in revenues, which exceed our expectations. Strong revenue gains indicate we are on track in building our revenue base through strategic marketing arrangements with leaders in the wireless industry." The Company expects to report its finalized quarterly results on or before November 15, 2000. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From shovey at buffnet.net Mon Oct 16 07:36:31 2000 From: shovey at buffnet.net (Stephen Hovey) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] (ASCEND) Weird user login issue Message-ID: During the busier part of the day, my ascends will often not manage to log a person in, or will log them in but packets wont route. I thought maybe my radius servers werent up to this many units, so I increased their number and spread out the term servers to them. Still does it. Any ideas? Or anyone have the best settings for dialup windoze people? ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From shovey at buffnet.net Mon Oct 16 07:36:31 2000 From: shovey at buffnet.net (Stephen Hovey) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] (ASCEND) Weird user login issue Message-ID: During the busier part of the day, my ascends will often not manage to log a person in, or will log them in but packets wont route. I thought maybe my radius servers werent up to this many units, so I increased their number and spread out the term servers to them. Still does it. Any ideas? Or anyone have the best settings for dialup windoze people? ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mdobra at mtco.com Mon Oct 16 08:14:36 2000 From: mdobra at mtco.com (Mick Dobra) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] Re: (ASCEND) Weird user login issue In-Reply-To: Message-ID: Logs in but no packets... do you have enough ip's routed over? On Mon, 16 Oct 2000, Stephen Hovey wrote: > > During the busier part of the day, my ascends will often not manage to log > a person in, or will log them in but packets wont route. > > I thought maybe my radius servers werent up to this many units, so I > increased their number and spread out the term servers to them. Still > does it. > > Any ideas? Or anyone have the best settings for dialup windoze people? > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: > *********************************************** Mick Dobra Systems Administrator MTCO Communications 1-800-859-6826 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From shovey at buffnet.net Mon Oct 16 08:18:43 2000 From: shovey at buffnet.net (Stephen Hovey) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] Re: (ASCEND) Weird user login issue In-Reply-To: Message-ID: Yup - I believe so. Do ascends hold a released IP for awhile before reusing it? Or are there any known IP leaks? IPs are mapped in the ascend and not handed out via radius. On Mon, 16 Oct 2000, Mick Dobra wrote: > Logs in but no packets... do you have enough ip's routed over? > > On Mon, 16 Oct 2000, Stephen Hovey wrote: > > > > > During the busier part of the day, my ascends will often not manage to log > > a person in, or will log them in but packets wont route. > > > > I thought maybe my radius servers werent up to this many units, so I > > increased their number and spread out the term servers to them. Still > > does it. > > > > Any ideas? Or anyone have the best settings for dialup windoze people? > > > > ++ Ascend Users Mailing List ++ > > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > > To get FAQ'd: > > > > *********************************************** > Mick Dobra > Systems Administrator > MTCO Communications > 1-800-859-6826 > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mdobra at mtco.com Mon Oct 16 08:14:36 2000 From: mdobra at mtco.com (Mick Dobra) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] Re: (ASCEND) Weird user login issue In-Reply-To: Message-ID: Logs in but no packets... do you have enough ip's routed over? On Mon, 16 Oct 2000, Stephen Hovey wrote: > > During the busier part of the day, my ascends will often not manage to log > a person in, or will log them in but packets wont route. > > I thought maybe my radius servers werent up to this many units, so I > increased their number and spread out the term servers to them. Still > does it. > > Any ideas? Or anyone have the best settings for dialup windoze people? > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: > *********************************************** Mick Dobra Systems Administrator MTCO Communications 1-800-859-6826 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From shovey at buffnet.net Mon Oct 16 08:18:43 2000 From: shovey at buffnet.net (Stephen Hovey) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] Re: (ASCEND) Weird user login issue In-Reply-To: Message-ID: Yup - I believe so. Do ascends hold a released IP for awhile before reusing it? Or are there any known IP leaks? IPs are mapped in the ascend and not handed out via radius. On Mon, 16 Oct 2000, Mick Dobra wrote: > Logs in but no packets... do you have enough ip's routed over? > > On Mon, 16 Oct 2000, Stephen Hovey wrote: > > > > > During the busier part of the day, my ascends will often not manage to log > > a person in, or will log them in but packets wont route. > > > > I thought maybe my radius servers werent up to this many units, so I > > increased their number and spread out the term servers to them. Still > > does it. > > > > Any ideas? Or anyone have the best settings for dialup windoze people? > > > > ++ Ascend Users Mailing List ++ > > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > > To get FAQ'd: > > > > *********************************************** > Mick Dobra > Systems Administrator > MTCO Communications > 1-800-859-6826 > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Mon Oct 16 11:55:10 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:29 2005 Subject: [Ascend] (ASCEND) TAOS 9.0.0 for TNT without 32 MB flash card? Message-ID: Hi all, The TAOS 9.0.0 TNT release note says: Memory requirement in TAOS 9.0 To upgrade to MAX TNT TAOS 9.0.0, your MAX TNT unit must be equipped with the 32Mb flash card. I don't understand... ;-) Has anyone with a TNT with a limited number of different card types installed tried loading the .ffs files for the specific card types maually? Seems like it'd work, as long as you're not using any features that store files to flash (IP Fax, Multivoice?). Anyone tried 9.0.0 at all? -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Mon Oct 16 11:55:10 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] (ASCEND) TAOS 9.0.0 for TNT without 32 MB flash card? Message-ID: Hi all, The TAOS 9.0.0 TNT release note says: Memory requirement in TAOS 9.0 To upgrade to MAX TNT TAOS 9.0.0, your MAX TNT unit must be equipped with the 32Mb flash card. I don't understand... ;-) Has anyone with a TNT with a limited number of different card types installed tried loading the .ffs files for the specific card types maually? Seems like it'd work, as long as you're not using any features that store files to flash (IP Fax, Multivoice?). Anyone tried 9.0.0 at all? -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From roddy at satlink.com.au Mon Oct 16 21:34:05 2000 From: roddy at satlink.com.au (Roddy Strachan) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] (ASCEND) Max 6k with Data over Voice Message-ID: <006b01c037e2$b8a1ec50$20de13cb@Roddy> Hi, Is it possible to allow a Max 6k, to use this new Telstra product Home Highway?? If so, are there any extras needed to enable this etc? software or and hardware --- Cheers, R. Strachan Satlink Internet Services Pty Ltd. Ph. +61-3-9775-2600 Fax. +61-3-9775-2456 Email. roddy@satlink.com.au rodstrach@hotmail.com rodster@unimobile.com (To Send email to Mobile) ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From roddy at satlink.com.au Mon Oct 16 21:34:05 2000 From: roddy at satlink.com.au (Roddy Strachan) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] (ASCEND) Max 6k with Data over Voice Message-ID: <006b01c037e2$b8a1ec50$20de13cb@Roddy> Hi, Is it possible to allow a Max 6k, to use this new Telstra product Home Highway?? If so, are there any extras needed to enable this etc? software or and hardware --- Cheers, R. Strachan Satlink Internet Services Pty Ltd. Ph. +61-3-9775-2600 Fax. +61-3-9775-2456 Email. roddy@satlink.com.au rodstrach@hotmail.com rodster@unimobile.com (To Send email to Mobile) ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mlevans at blacksburg.net Tue Oct 17 19:21:45 2000 From: mlevans at blacksburg.net (Lyle Evans) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] (ASCEND) FS: rackears (rackmount brackets) for Ascend & other equipment Message-ID: <3.0.5.32.20001017202145.008a94a0@pop.blacksburg.net> We are selling rackear kits for Ascend 4xxx, and Ascend 1800, We are also selling generic rackears kits for rackmount equipment, in 1U to 6U sizes, and rackears for some models of Cisco, 3comm, Livingston and other brands of networking equipment. Prices range from $23.00 to $50.00 per pair, depending on model plus $7.00 handling per order. For further information and to order please visit: http://www.rackears.com/ Thank you, Lyle Evans lyle@rackears.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mlevans at blacksburg.net Tue Oct 17 19:21:45 2000 From: mlevans at blacksburg.net (Lyle Evans) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] (ASCEND) FS: rackears (rackmount brackets) for Ascend & other equipment Message-ID: <3.0.5.32.20001017202145.008a94a0@pop.blacksburg.net> We are selling rackear kits for Ascend 4xxx, and Ascend 1800, We are also selling generic rackears kits for rackmount equipment, in 1U to 6U sizes, and rackears for some models of Cisco, 3comm, Livingston and other brands of networking equipment. Prices range from $23.00 to $50.00 per pair, depending on model plus $7.00 handling per order. For further information and to order please visit: http://www.rackears.com/ Thank you, Lyle Evans lyle@rackears.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From scott at millenniumsolutions.net Tue Oct 17 20:05:03 2000 From: scott at millenniumsolutions.net (Scott Woodland) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] (ASCEND) FS: MAX 6048's and 6096's Message-ID: <003001c0389f$72706d20$cf582cd0@new2u.net> Hello All, I have available a few Max6048's and 6096's....as well as some Max4048's For all you E1 users....have a couple of E1 units as well (only on the 60XX) Condition: Used/Refurbished with 90 Day warranty. Please let me know if you have any needs. Also...We buy out of service networking hardware. If you have old or out of service equipment that you want to get $$ for, please let me know. Please contact me offline directly at scott@millenniumsolutions.net or the phone numbers below. Regards, Scott Woodland Millennium Solutions Group, Inc. 575 Menlo Drive, Suite 4 Rocklin, CA 95765 Ph. 888-801-2001 or 916-630-2001 Ext.230 Fax 916-630-2000 www.millenniumsolutions.net ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From scott at millenniumsolutions.net Tue Oct 17 20:05:03 2000 From: scott at millenniumsolutions.net (Scott Woodland) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] (ASCEND) FS: MAX 6048's and 6096's Message-ID: <003001c0389f$72706d20$cf582cd0@new2u.net> Hello All, I have available a few Max6048's and 6096's....as well as some Max4048's For all you E1 users....have a couple of E1 units as well (only on the 60XX) Condition: Used/Refurbished with 90 Day warranty. Please let me know if you have any needs. Also...We buy out of service networking hardware. If you have old or out of service equipment that you want to get $$ for, please let me know. Please contact me offline directly at scott@millenniumsolutions.net or the phone numbers below. Regards, Scott Woodland Millennium Solutions Group, Inc. 575 Menlo Drive, Suite 4 Rocklin, CA 95765 Ph. 888-801-2001 or 916-630-2001 Ext.230 Fax 916-630-2000 www.millenniumsolutions.net ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jim at coam.net Wed Oct 18 01:02:17 2000 From: jim at coam.net (Jim Warren) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] (ASCEND) pipelines, NAT and "real" addresses on same connection... Message-ID: <971848937.39ed3ce9668af@oasis.coam.net> does anyone know if it is possible to use NAT and a small subnet of "real" addresses at the same time with the pipelines? thanks! ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jim at coam.net Wed Oct 18 01:02:17 2000 From: jim at coam.net (Jim Warren) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] (ASCEND) pipelines, NAT and "real" addresses on same connection... Message-ID: <971848937.39ed3ce9668af@oasis.coam.net> does anyone know if it is possible to use NAT and a small subnet of "real" addresses at the same time with the pipelines? thanks! ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From scott at aobe.com Wed Oct 18 16:59:15 2000 From: scott at aobe.com (Scott Starbuck) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] Re: (ASCEND) pipelines, NAT and "real" addresses on same connection... References: <971848937.39ed3ce9668af@oasis.coam.net> Message-ID: <39EE1D33.D16F3E4D@aobe.com> Hi Jim, The pipeline doesn't care if the IP addresses are "real" public or private. NAT limits access from the outside so the "real" IP addresses can't be seen from outside the LAN. There are some provisions for mapping ports to a specific pc for a webserver, ftp, telnet or whatever, but there are some limitations for applications that use a range of ports. Scott Jim Warren wrote: > does anyone know if it is possible to use NAT and a small subnet of "real" > addresses at the same time with the pipelines? > > thanks! > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From scott at aobe.com Wed Oct 18 16:59:15 2000 From: scott at aobe.com (Scott Starbuck) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] Re: (ASCEND) pipelines, NAT and "real" addresses on same connection... References: <971848937.39ed3ce9668af@oasis.coam.net> Message-ID: <39EE1D33.D16F3E4D@aobe.com> Hi Jim, The pipeline doesn't care if the IP addresses are "real" public or private. NAT limits access from the outside so the "real" IP addresses can't be seen from outside the LAN. There are some provisions for mapping ports to a specific pc for a webserver, ftp, telnet or whatever, but there are some limitations for applications that use a range of ports. Scott Jim Warren wrote: > does anyone know if it is possible to use NAT and a small subnet of "real" > addresses at the same time with the pipelines? > > thanks! > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From kenk at shreve.net Wed Oct 18 17:13:40 2000 From: kenk at shreve.net (Ken Kirchner) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] Re: (ASCEND) pipelines, NAT and "real" addresses on same connection... In-Reply-To: <971848937.39ed3ce9668af@oasis.coam.net> Message-ID: Man, you dont know what a pain in the ass trying to get that to work has been for me. From kenk at shreve.net Wed Oct 18 17:13:40 2000 From: kenk at shreve.net (Ken Kirchner) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] Re: (ASCEND) pipelines, NAT and "real" addresses on same connection... In-Reply-To: <971848937.39ed3ce9668af@oasis.coam.net> Message-ID: Man, you dont know what a pain in the ass trying to get that to work has been for me. From boris at bulnet.bg Thu Oct 19 09:42:45 2000 From: boris at bulnet.bg (Boris Basmadjiev) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] (ASCEND) WTB: Ascend E1 units Message-ID: <39EF0865.BDCA8048@bulnet.bg> Hi all - i need to buy a couple of the older Ascend MAX units 4000 or 2000 with E1, not T1. Thanks, Boris B. boris@bulnet.bg ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From boris at bulnet.bg Thu Oct 19 09:42:45 2000 From: boris at bulnet.bg (Boris Basmadjiev) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] (ASCEND) WTB: Ascend E1 units Message-ID: <39EF0865.BDCA8048@bulnet.bg> Hi all - i need to buy a couple of the older Ascend MAX units 4000 or 2000 with E1, not T1. Thanks, Boris B. boris@bulnet.bg ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Thu Oct 19 11:14:50 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:30 2005 Subject: [Ascend] Re: (ASCEND) pipelines, NAT and "real" addresses on same connection... In-Reply-To: <200010190545.WAA09475@max.bungi.com> References: <200010190545.WAA09475@max.bungi.com> Message-ID: >From: Jim Warren > >does anyone know if it is possible to use NAT and a small subnet of "real" >addresses at the same time with the pipelines? Not AFAIK, but this can easily be done with Netopia routers. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Thu Oct 19 11:14:50 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] Re: (ASCEND) pipelines, NAT and "real" addresses on same connection... In-Reply-To: <200010190545.WAA09475@max.bungi.com> References: <200010190545.WAA09475@max.bungi.com> Message-ID: >From: Jim Warren > >does anyone know if it is possible to use NAT and a small subnet of "real" >addresses at the same time with the pipelines? Not AFAIK, but this can easily be done with Netopia routers. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From Benzo007 at home.com Thu Oct 19 13:29:43 2000 From: Benzo007 at home.com (Ben Nelson (benzo007@home.com)) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] (ASCEND) ForSale ascend mx-sl-16mod-s56 1500.00 each Message-ID: <00f901c039fa$d71a34c0$8344b218@sprgfld1.mo.home.com> For sale ascend mx-sl-16mod-s56 1500.00 each for the 4048 equipment. comes with a 30 day warranty. Ben Nelson Western Data Transfer 417-887-7724 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From Benzo007 at home.com Thu Oct 19 13:29:43 2000 From: Benzo007 at home.com (Ben Nelson (benzo007@home.com)) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] (ASCEND) ForSale ascend mx-sl-16mod-s56 1500.00 each Message-ID: <00f901c039fa$d71a34c0$8344b218@sprgfld1.mo.home.com> For sale ascend mx-sl-16mod-s56 1500.00 each for the 4048 equipment. comes with a 30 day warranty. Ben Nelson Western Data Transfer 417-887-7724 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From gdaley at lucent.com Thu Oct 19 19:25:27 2000 From: gdaley at lucent.com (Greg Daley) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] Re: (ASCEND) pipelines, NAT and "real" addresses on same connection... In-Reply-To: References: <971848937.39ed3ce9668af@oasis.coam.net> Message-ID: <3.0.5.32.20001020102527.00cfb200@mail.ascend.com.au> At 17:13 18/10/00 -0500, Ken Kirchner wrote: >Man, you dont know what a pain in the ass trying to get that to work has >been for me. > >>From what I have gathered, at least with v6.x code, it cannot be done. > >I have just successfully accomplished what you describe (this very >day) using a SuperPipe 155 and the latest 8.x code. > >It requires a feature Lucent/Ascend calls "No NAT Net" which will keep a >single subnet from being translated. If you can find a software revision >that supports this feature, then you should be ok. I dont know if it is >available for anything but the SuperPipe, though. Pipeline 7.3.2 and 8.0-101.0 Just look on the FTP site. ftp://ftp.ascend.com/pub/Software-Releases/Pipeline/Release-7.3.X/7.3.2/doc/ ftp://ftp.ascend.com/pub/Software-Releases/Pipeline/Release-7.3.X/7.3.2/ ftp://ftp.ascend.com/pub/Software-Releases/Pipeline/Release-8.0-101.0/doc/ ftp://ftp.ascend.com/pub/Software-Releases/Pipeline/Release-8.0-101.0/ Greg ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From gdaley at lucent.com Thu Oct 19 19:25:27 2000 From: gdaley at lucent.com (Greg Daley) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] Re: (ASCEND) pipelines, NAT and "real" addresses on same connection... In-Reply-To: References: <971848937.39ed3ce9668af@oasis.coam.net> Message-ID: <3.0.5.32.20001020102527.00cfb200@mail.ascend.com.au> At 17:13 18/10/00 -0500, Ken Kirchner wrote: >Man, you dont know what a pain in the ass trying to get that to work has >been for me. > >>From what I have gathered, at least with v6.x code, it cannot be done. > >I have just successfully accomplished what you describe (this very >day) using a SuperPipe 155 and the latest 8.x code. > >It requires a feature Lucent/Ascend calls "No NAT Net" which will keep a >single subnet from being translated. If you can find a software revision >that supports this feature, then you should be ok. I dont know if it is >available for anything but the SuperPipe, though. Pipeline 7.3.2 and 8.0-101.0 Just look on the FTP site. ftp://ftp.ascend.com/pub/Software-Releases/Pipeline/Release-7.3.X/7.3.2/doc/ ftp://ftp.ascend.com/pub/Software-Releases/Pipeline/Release-7.3.X/7.3.2/ ftp://ftp.ascend.com/pub/Software-Releases/Pipeline/Release-8.0-101.0/doc/ ftp://ftp.ascend.com/pub/Software-Releases/Pipeline/Release-8.0-101.0/ Greg ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From dl at origin.net.au Fri Oct 20 00:51:58 2000 From: dl at origin.net.au (David Latter) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] (ASCEND) Stacking Max 6000 In-Reply-To: <001c01c029ad$5ce3fc20$8dfee0d1@westbend.net> Message-ID: <002101c03a59$dc3783e0$ccb517cb@origin> What is the best way to stack several max 6000? I have looked into the manual and have read up on the mpp stacking but I though I there was a way to set them up as 1 unit? Can anyone point me in the right direction <-------------------------> David Latter Network Manager Origin Internet Solutions Pty Ltd Ph (03) 5441 8000 Fax (03) 5444 0075 <-------------------------> ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From dl at origin.net.au Fri Oct 20 00:51:58 2000 From: dl at origin.net.au (David Latter) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] (ASCEND) Stacking Max 6000 In-Reply-To: <001c01c029ad$5ce3fc20$8dfee0d1@westbend.net> Message-ID: <002101c03a59$dc3783e0$ccb517cb@origin> What is the best way to stack several max 6000? I have looked into the manual and have read up on the mpp stacking but I though I there was a way to set them up as 1 unit? Can anyone point me in the right direction <-------------------------> David Latter Network Manager Origin Internet Solutions Pty Ltd Ph (03) 5441 8000 Fax (03) 5444 0075 <-------------------------> ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From danko at sezampro.yu Fri Oct 20 01:15:55 2000 From: danko at sezampro.yu (Danko Jevtovic) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] (ASCEND) Testing 123... In-Reply-To: <00f901c039fa$d71a34c0$8344b218@sprgfld1.mo.home.com> Message-ID: Testing, please ignore. I tried to send messaged few times and it did not get to the list. Maybe problem with message length? ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From danko at sezampro.yu Fri Oct 20 01:15:55 2000 From: danko at sezampro.yu (Danko Jevtovic) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] (ASCEND) Testing 123... In-Reply-To: <00f901c039fa$d71a34c0$8344b218@sprgfld1.mo.home.com> Message-ID: Testing, please ignore. I tried to send messaged few times and it did not get to the list. Maybe problem with message length? ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From maxed_out_user at hotmail.com Fri Oct 20 02:57:17 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] Re: (ASCEND) Stacking Max 6000 Message-ID: There are a few things you want to keep in mind when setting up stacking: 1. Maxes should be on the same software version (because different revisions of stacking might not be compatible). 2. Maxes should be on the same physical network and subnet (becasue stacking uses multicast packets to initially discover other members of the stack). 3. The larger the number of Maxes you put in a stack, the busier your network LAN will get so keep this in mind. Otherwise, just configure the stacking options under Ethernet->Mod Config (make sure the UDP port and stack name matches). What is the best way to stack several max 6000? I have looked into the manual and have read up on the mpp stacking but I though I there was a way to set them up as 1 unit? Can anyone point me in the right direction _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From maxed_out_user at hotmail.com Fri Oct 20 02:57:17 2000 From: maxed_out_user at hotmail.com (Max User) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] Re: (ASCEND) Stacking Max 6000 Message-ID: There are a few things you want to keep in mind when setting up stacking: 1. Maxes should be on the same software version (because different revisions of stacking might not be compatible). 2. Maxes should be on the same physical network and subnet (becasue stacking uses multicast packets to initially discover other members of the stack). 3. The larger the number of Maxes you put in a stack, the busier your network LAN will get so keep this in mind. Otherwise, just configure the stacking options under Ethernet->Mod Config (make sure the UDP port and stack name matches). What is the best way to stack several max 6000? I have looked into the manual and have read up on the mpp stacking but I though I there was a way to set them up as 1 unit? Can anyone point me in the right direction _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From niederhuefner at prolink.de Fri Oct 20 03:23:59 2000 From: niederhuefner at prolink.de (Ralf Niederhuefner) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] (ASCEND) WAN-cable In-Reply-To: <200010200545.WAA15332@max.bungi.com> Message-ID: <000001c03a6f$19ccb1c0$e5a6cbc1@intern.prolink.de> Hi all, i need 2 cables for connecting X.21 to the serial-WAN port on MAXen. The original productcode was MXHP-X21 AFAIK. Anyone out there with 2 spares ? Thanks for any offer, to my personal emailadress please. Ralf -- Ralf Niederh?fner ----------------------------------------- PROLINK internet communications GmbH Merzhauser Str. 76 D-79100 Freiburg fon +49 (0)761 / 456 989-0 fax +49 (0)761 / 456 989-99 http://www.prolink.de/ Amtsgericht Freiburg i.Br. HRB 6177 Gesch?ftsf?hrung: Susanne H?ring-B?rtle Dipl.-Ing. (FH) Ralf Niederh?fner Markus B?rtle ----------------------------------------- ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From niederhuefner at prolink.de Fri Oct 20 03:23:59 2000 From: niederhuefner at prolink.de (Ralf Niederhuefner) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] (ASCEND) WAN-cable In-Reply-To: <200010200545.WAA15332@max.bungi.com> Message-ID: <000001c03a6f$19ccb1c0$e5a6cbc1@intern.prolink.de> Hi all, i need 2 cables for connecting X.21 to the serial-WAN port on MAXen. The original productcode was MXHP-X21 AFAIK. Anyone out there with 2 spares ? Thanks for any offer, to my personal emailadress please. Ralf -- Ralf Niederh?fner ----------------------------------------- PROLINK internet communications GmbH Merzhauser Str. 76 D-79100 Freiburg fon +49 (0)761 / 456 989-0 fax +49 (0)761 / 456 989-99 http://www.prolink.de/ Amtsgericht Freiburg i.Br. HRB 6177 Gesch?ftsf?hrung: Susanne H?ring-B?rtle Dipl.-Ing. (FH) Ralf Niederh?fner Markus B?rtle ----------------------------------------- ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From boris at bulnet.bg Fri Oct 20 13:42:45 2000 From: boris at bulnet.bg (Boris Basmadjiev) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] (ASCEND) WTB: Ascend Max E1 units Message-ID: <39F09225.5EB197A2@bulnet.bg> Hi all - i need to buy a couple of Max ascend E1 units (european type) - the older max 4000 or max 2000 would be fine. I can buy chassis only or units with v.34 cards. Thanks, Boris B. boris@bulnet.bg ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From boris at bulnet.bg Fri Oct 20 13:42:45 2000 From: boris at bulnet.bg (Boris Basmadjiev) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] (ASCEND) WTB: Ascend Max E1 units Message-ID: <39F09225.5EB197A2@bulnet.bg> Hi all - i need to buy a couple of Max ascend E1 units (european type) - the older max 4000 or max 2000 would be fine. I can buy chassis only or units with v.34 cards. Thanks, Boris B. boris@bulnet.bg ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jcs at idpc.com Fri Oct 20 14:40:41 2000 From: jcs at idpc.com (John Shaw) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] RE: (ASCEND) WTB: Ascend Max E1 units Message-ID: <01C03AAC.1AEF7320.jcs@idpc.com> I have the following. Let me know if anything fits your requirements. FOR SALE from IDPC: ASCEND TNT-SL-48MOD-S-C - Series56 Digital Modem Modules- Single slot, 48-Port V.90 digital modem model. These cards are upgraded and tested material. They are used. I can offer a 90 day warranty on them. PRICE: $3500.00ea. ASCEND MAX 3000 - MX30-2E1-AC-60IX = Max 3060 with 2 E1/PRI connections , 30 built-in modems + 30 on card. PRICE: $5775.00ea. Warranty is non-DOA meaning if you receive the equipment in non-working order, I would replace it. ASCEND MX-SL-16MOD-S56 - $1400.00ea. ASCEND MAX 4048 - $4800.00ea. MAX 4048 - Chassis (MXHP-2T1-48-ES) are dual T1 and configured with 3, 16 port modem cards (MX-SL-16MOD-S56) . ASCEND TNT-SL-SDSLH24T - SDSL slot cards - 24Port SDSL High Performance Line Card Compatible with both MAX TNT and the DSL TNT. Cards have never been used and current. PRICE: $2,200.00ea. MUCH more Ascend available - just ask. Thanks. Regards, John Shaw Information Data Products Corp. 28 Bowling Green Parkway Lake Hopatcong, NJ 07849 www.idpc.com -----Original Message----- From: Boris Basmadjiev [SMTP:boris@bulnet.bg] Sent: Friday, October 20, 2000 2:43 PM To: ascend-users@bungi.com Subject: (ASCEND) WTB: Ascend Max E1 units << File: ATT00030.txt; charset = koi8-r >> ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jcs at idpc.com Fri Oct 20 14:40:41 2000 From: jcs at idpc.com (John Shaw) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] RE: (ASCEND) WTB: Ascend Max E1 units Message-ID: <01C03AAC.1AEF7320.jcs@idpc.com> I have the following. Let me know if anything fits your requirements. FOR SALE from IDPC: ASCEND TNT-SL-48MOD-S-C - Series56 Digital Modem Modules- Single slot, 48-Port V.90 digital modem model. These cards are upgraded and tested material. They are used. I can offer a 90 day warranty on them. PRICE: $3500.00ea. ASCEND MAX 3000 - MX30-2E1-AC-60IX = Max 3060 with 2 E1/PRI connections , 30 built-in modems + 30 on card. PRICE: $5775.00ea. Warranty is non-DOA meaning if you receive the equipment in non-working order, I would replace it. ASCEND MX-SL-16MOD-S56 - $1400.00ea. ASCEND MAX 4048 - $4800.00ea. MAX 4048 - Chassis (MXHP-2T1-48-ES) are dual T1 and configured with 3, 16 port modem cards (MX-SL-16MOD-S56) . ASCEND TNT-SL-SDSLH24T - SDSL slot cards - 24Port SDSL High Performance Line Card Compatible with both MAX TNT and the DSL TNT. Cards have never been used and current. PRICE: $2,200.00ea. MUCH more Ascend available - just ask. Thanks. Regards, John Shaw Information Data Products Corp. 28 Bowling Green Parkway Lake Hopatcong, NJ 07849 www.idpc.com -----Original Message----- From: Boris Basmadjiev [SMTP:boris@bulnet.bg] Sent: Friday, October 20, 2000 2:43 PM To: ascend-users@bungi.com Subject: (ASCEND) WTB: Ascend Max E1 units << File: ATT00030.txt; charset = koi8-r >> ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mknewman at blkbox.com Sat Oct 21 06:34:12 2000 From: mknewman at blkbox.com (Marc Newman) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] (ASCEND) Fans not working Message-ID: <200010211134.GAA17800@blkbox.com> I have a Max4000 that stopped working a few weeks ago. No fans running, the LEDs on the front all are on. The main board appears to be working but I can't talk to it via ethernet or serial. I replaced the +5 and +12 volt power supply last night, I had a spare, but I didn't have one for the 5 volt main supply. No fans on after replacing it. Do you think replacing the other power supply is worth a try? I can order one but I would have thought the fans ran off the 12v not the 5v. Marc ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mknewman at blkbox.com Sat Oct 21 06:34:12 2000 From: mknewman at blkbox.com (Marc Newman) Date: Tue Jan 18 13:59:31 2005 Subject: [Ascend] (ASCEND) Fans not working Message-ID: <200010211134.GAA17800@blkbox.com> I have a Max4000 that stopped working a few weeks ago. No fans running, the LEDs on the front all are on. The main board appears to be working but I can't talk to it via ethernet or serial. I replaced the +5 and +12 volt power supply last night, I had a spare, but I didn't have one for the 5 volt main supply. No fans on after replacing it. Do you think replacing the other power supply is worth a try? I can order one but I would have thought the fans ran off the 12v not the 5v. Marc ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From samanthap at howards.com Sat Oct 21 04:58:13 2000 From: samanthap at howards.com (samanthap@howards.com) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] (ASCEND) h.s.s. Message-ID: <4S0e164u5L> Halloween XXX CD-Rom Super Sale! CYBER DATE - Cyber Hit's award winning software turns your Mac or PC into one hot, erotic sex fest! Keep her all for yourself while you ask her to try on or take off different clothes. Guide her through dozens of sexual activities, or let her guide you as you see it all as though you were the one on top of her! Order her to call up one of her friends (or all of them) as you call all the shots and witness or participate in the hottest orgy you can imagine! Because of her artificial intelligence and huge vocabulary, each time you play is unique. Each time you play, you'll learn more about her and all that she can do. The result is 100's of hours of awesome erotic entertainment which makes Cyber Date one of the greats! Comes with both male and female versions! ********************* Special Offer ********************* *Get two more new and exciting adult games for an additional $19.95* ********************************************************* This is to inform you about the new adult game that VCS Magazine rated "The Best Adult Game of 2000". "The Search for Paradise is no doubt one of the hottest XXX adult games available...". This is the first game that is as much fun as it is a turn on! Travel the world to every continent, every country you can think of, and meet some of the most beautiful women in existence. These women will treat you like a king and obey your every command as well as any sexual desire you can think of. There is a different paradise for every guy out there, and this game will have them all. This game uses digital video, and digital sound to make it as realistic as possible. You'll also receive "Club Celebrity X". Meet, talk to and make love with the celebrities of your choice. ---------------------------------------------------------------------------------------------------- Also check out "Fantasies". Currently our hottest selling title! What's your fantasy? Chances are it's on this game! Participate in dozens of the hottest, wildest sexual fantasies ever imagined! You no longer have to imagine what it would be like. All orders are shipped discreetly in an unmarked package. Your name and information will never be put on any mailing lists! To order, please send to: First Byte Software (Includes shipping and handling) 9135-A Reseda Blvd PMB 164 Northridge, CA 91324 Please fill out the following form and mail it to the address above. You must be over the age of 18 to order this software. - - - - - - - - - - - - - - - - - - - - - (Cut here)- - - - - - - - - - - - - - - - - - - - - - - First Byte Software 9135-A Reseda Blvd PMB 164 Northridge, CA 91324 Your Name: Address: City, State, Zip: ( ) Cyber Date............................................................$19.95 ( ) The Search for Paradise & Club Celebrity X.....$19.95 ( ) Fantasies.............................................................$19.95 BEST VALUE!! ( ) Everything!!! Cyber Date, The Search for Paradise, Club Celebrity X, Fantasies...............................................$39.95 Amount enclosed? **Reseller ID# 891** ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From samanthap at howards.com Sat Oct 21 04:58:13 2000 From: samanthap at howards.com (samanthap@howards.com) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] (ASCEND) h.s.s. Message-ID: <4S0e164u5L> Halloween XXX CD-Rom Super Sale! CYBER DATE - Cyber Hit's award winning software turns your Mac or PC into one hot, erotic sex fest! Keep her all for yourself while you ask her to try on or take off different clothes. Guide her through dozens of sexual activities, or let her guide you as you see it all as though you were the one on top of her! Order her to call up one of her friends (or all of them) as you call all the shots and witness or participate in the hottest orgy you can imagine! Because of her artificial intelligence and huge vocabulary, each time you play is unique. Each time you play, you'll learn more about her and all that she can do. The result is 100's of hours of awesome erotic entertainment which makes Cyber Date one of the greats! Comes with both male and female versions! ********************* Special Offer ********************* *Get two more new and exciting adult games for an additional $19.95* ********************************************************* This is to inform you about the new adult game that VCS Magazine rated "The Best Adult Game of 2000". "The Search for Paradise is no doubt one of the hottest XXX adult games available...". This is the first game that is as much fun as it is a turn on! Travel the world to every continent, every country you can think of, and meet some of the most beautiful women in existence. These women will treat you like a king and obey your every command as well as any sexual desire you can think of. There is a different paradise for every guy out there, and this game will have them all. This game uses digital video, and digital sound to make it as realistic as possible. You'll also receive "Club Celebrity X". Meet, talk to and make love with the celebrities of your choice. ---------------------------------------------------------------------------------------------------- Also check out "Fantasies". Currently our hottest selling title! What's your fantasy? Chances are it's on this game! Participate in dozens of the hottest, wildest sexual fantasies ever imagined! You no longer have to imagine what it would be like. All orders are shipped discreetly in an unmarked package. Your name and information will never be put on any mailing lists! To order, please send to: First Byte Software (Includes shipping and handling) 9135-A Reseda Blvd PMB 164 Northridge, CA 91324 Please fill out the following form and mail it to the address above. You must be over the age of 18 to order this software. - - - - - - - - - - - - - - - - - - - - - (Cut here)- - - - - - - - - - - - - - - - - - - - - - - First Byte Software 9135-A Reseda Blvd PMB 164 Northridge, CA 91324 Your Name: Address: City, State, Zip: ( ) Cyber Date............................................................$19.95 ( ) The Search for Paradise & Club Celebrity X.....$19.95 ( ) Fantasies.............................................................$19.95 BEST VALUE!! ( ) Everything!!! Cyber Date, The Search for Paradise, Club Celebrity X, Fantasies...............................................$39.95 Amount enclosed? **Reseller ID# 891** ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Sat Oct 21 12:05:18 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] Re: (ASCEND) Stacking Max 6000 In-Reply-To: <200010210545.WAA21572@max.bungi.com> References: <200010210545.WAA21572@max.bungi.com> Message-ID: > >From: "David Latter" >>What is the best way to stack several max 6000? I have looked into >>the manual and have read up on the mpp stacking but I though I there >>was a way to set them up as 1 unit? > >From: "Max User" > >There are a few things you want to keep in mind when setting up stacking: >3. The larger the number of Maxes you put in a stack, the busier your >network LAN will get so keep this in mind. For this reason, an Ethernet switch is a good idea, and necessary if traffic is high/several units are stacked. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Sat Oct 21 12:05:18 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] Re: (ASCEND) Stacking Max 6000 In-Reply-To: <200010210545.WAA21572@max.bungi.com> References: <200010210545.WAA21572@max.bungi.com> Message-ID: > >From: "David Latter" >>What is the best way to stack several max 6000? I have looked into >>the manual and have read up on the mpp stacking but I though I there >>was a way to set them up as 1 unit? > >From: "Max User" > >There are a few things you want to keep in mind when setting up stacking: >3. The larger the number of Maxes you put in a stack, the busier your >network LAN will get so keep this in mind. For this reason, an Ethernet switch is a good idea, and necessary if traffic is high/several units are stacked. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From gr at ipw.net Sat Oct 21 16:17:30 2000 From: gr at ipw.net (rdewiesbaden) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] more and more spam-mails within this forum Message-ID: <39F207EA.157A@ipw.net> hallo to all together, i do receive more an more crazy spam mails inside the ascend and the cisco forum. you too ????? are there any ideas, to block that or to bring them into trouble ? we shoud do something until it disturbes that super job, the people from real-time.com do. should we send one million orders or 2 million mails to these adresses i am really sad about that. any legal and illegal suggestion welcome we are an isp in wiesbaden / germany regards from germany gert redlich -- mit freundlichen Gr??en Dipl.Ing.Gert Redlich | mailto: gr@ipw.net RDE Network Systems | phone: +49 611 95031-0 ISP + PoP Wiesbaden | fax: +49 611 95031-555 Kirchbornstrasse 2 | www1: http://www.ipw.net D-65191 Wiesb./Germany | www2: http://www.rde.net From tom at ispstuff.com Mon Oct 23 08:14:42 2000 From: tom at ispstuff.com (ISPstuff) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] (ASCEND) FS: TNT 48 port single slot 56k modem cards Message-ID: <3.0.3.32.20001023081442.01d76768@mail.icd.com> Clearing out my spare Max modem cards. I have the following used Max equipment in stock: 5 MAX-SL-16MOD-S56 asking $1400 each 1 MAX-SL-32HDLC asking $350 1 MAX-SL-12MOD asking $175 4 MAX-SL-8MOD asking $75 each Offers accepted. All equipment guaranteed. I can be reached by email or at 815-968-9888. Tom ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tom at ispstuff.com Mon Oct 23 08:15:30 2000 From: tom at ispstuff.com (ISPstuff) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] (ASCEND) FS: Max Modem cards Message-ID: <3.0.3.32.20001023081530.02ec764c@mail.icd.com> Clearing out my spare Max modem cards. I have the following used Max equipment in stock: 5 MAX-SL-16MOD-S56 asking $1400 each 1 MAX-SL-32HDLC asking $350 1 MAX-SL-12MOD asking $175 4 MAX-SL-8MOD asking $75 each Offers accepted. All equipment guaranteed. I can be reached by email or at 815-968-9888. Tom ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tom at ispstuff.com Mon Oct 23 08:15:30 2000 From: tom at ispstuff.com (ISPstuff) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] (ASCEND) FS: Max Modem cards Message-ID: <3.0.3.32.20001023081530.02ec764c@mail.icd.com> Clearing out my spare Max modem cards. I have the following used Max equipment in stock: 5 MAX-SL-16MOD-S56 asking $1400 each 1 MAX-SL-32HDLC asking $350 1 MAX-SL-12MOD asking $175 4 MAX-SL-8MOD asking $75 each Offers accepted. All equipment guaranteed. I can be reached by email or at 815-968-9888. Tom ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tom at ispstuff.com Mon Oct 23 08:14:42 2000 From: tom at ispstuff.com (ISPstuff) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] (ASCEND) FS: TNT 48 port single slot 56k modem cards Message-ID: <3.0.3.32.20001023081442.01d76768@mail.icd.com> Clearing out my spare Max modem cards. I have the following used Max equipment in stock: 5 MAX-SL-16MOD-S56 asking $1400 each 1 MAX-SL-32HDLC asking $350 1 MAX-SL-12MOD asking $175 4 MAX-SL-8MOD asking $75 each Offers accepted. All equipment guaranteed. I can be reached by email or at 815-968-9888. Tom ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From danko at sezampro.yu Mon Oct 23 12:56:32 2000 From: danko at sezampro.yu (Danko Jevtovic) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] (ASCEND) Chosing TNT Message-ID: We are using MAX4060 E1 units for ISDN/analog dial-in for our ISP in Europe and we plan to purchase used Max TNT. We have offer for such unit fully loaded for 8 E1 dial in lines. I have following specification and we where promised to receive R2-CAS signalization with the unit. As I do not have any experience with TNT (only with MAX4000) I need help from list members in order to technically evaluate this offer. I know that TNT has some issued as series I/II/II modem card, limit on number of HDSL channels, etc. We need it to fully utilize 8 E1 lines for dial-in with mixed R2 and ISDN signaling and we expect 100% load (all lines busy) every night. Is this configuration adequate for the task and up to date technically? Thank for any help, Danko Jevtovic *** MAX TNT with Dual PS 16 A, AC 250V *** admin> sh Shelf 1 ( standalone ): { shelf-1 slot-1 0 } UP 4/1ether-card { shelf-1 slot-2 0 } UP 8e1-card { shelf-1 slot-3 0 } UP 192hdlc-card { shelf-1 slot-4 0 } UP 48modem-56k-card { shelf-1 slot-5 } OCCUPIED { shelf-1 slot-6 0 } UP 48modem-56k-card { shelf-1 slot-7 } OCCUPIED { shelf-1 slot-8 0 } UP 48modem-56k-card { shelf-1 slot-9 } OCCUPIED { shelf-1 slot-10 0 } UP 48modem-56k-card { shelf-1 slot-11 } OCCUPIED { shelf-1 slot-12 0 } UP 48modem-56k-card { shelf-1 slot-13 } OCCUPIED { shelf-1 slot-14 0 } UP 48modem-56k-card { shelf-1 slot-15 } OCCUPIED ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From danko at sezampro.yu Mon Oct 23 12:56:32 2000 From: danko at sezampro.yu (Danko Jevtovic) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] (ASCEND) Chosing TNT Message-ID: We are using MAX4060 E1 units for ISDN/analog dial-in for our ISP in Europe and we plan to purchase used Max TNT. We have offer for such unit fully loaded for 8 E1 dial in lines. I have following specification and we where promised to receive R2-CAS signalization with the unit. As I do not have any experience with TNT (only with MAX4000) I need help from list members in order to technically evaluate this offer. I know that TNT has some issued as series I/II/II modem card, limit on number of HDSL channels, etc. We need it to fully utilize 8 E1 lines for dial-in with mixed R2 and ISDN signaling and we expect 100% load (all lines busy) every night. Is this configuration adequate for the task and up to date technically? Thank for any help, Danko Jevtovic *** MAX TNT with Dual PS 16 A, AC 250V *** admin> sh Shelf 1 ( standalone ): { shelf-1 slot-1 0 } UP 4/1ether-card { shelf-1 slot-2 0 } UP 8e1-card { shelf-1 slot-3 0 } UP 192hdlc-card { shelf-1 slot-4 0 } UP 48modem-56k-card { shelf-1 slot-5 } OCCUPIED { shelf-1 slot-6 0 } UP 48modem-56k-card { shelf-1 slot-7 } OCCUPIED { shelf-1 slot-8 0 } UP 48modem-56k-card { shelf-1 slot-9 } OCCUPIED { shelf-1 slot-10 0 } UP 48modem-56k-card { shelf-1 slot-11 } OCCUPIED { shelf-1 slot-12 0 } UP 48modem-56k-card { shelf-1 slot-13 } OCCUPIED { shelf-1 slot-14 0 } UP 48modem-56k-card { shelf-1 slot-15 } OCCUPIED ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Tue Oct 24 11:56:49 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] Re: (ASCEND) Chosing TNT In-Reply-To: <200010240545.WAA05133@max.bungi.com> References: <200010240545.WAA05133@max.bungi.com> Message-ID: >From: "Danko Jevtovic" > >We are using MAX4060 E1 units for ISDN/analog dial-in for our ISP in Europe >and we plan to purchase used Max TNT. We have offer for such unit fully >loaded for 8 E1 dial in lines. I have following specification and we where >promised to receive R2-CAS signalization with the unit. > >As I do not have any experience with TNT (only with MAX4000) I need help >from list members in order to technically evaluate this offer. I know that >TNT has some issued as series I/II/II modem card, limit on number of HDSL >channels, etc. We need it to fully utilize 8 E1 lines for dial-in with mixed >R2 and ISDN signaling and we expect 100% load (all lines busy) every night. >Is this configuration adequate for the task and up to date technically? > >*** MAX TNT with Dual PS 16 A, AC 250V *** >admin> sh >Shelf 1 ( standalone ): > { shelf-1 slot-1 0 } UP 4/1ether-card > { shelf-1 slot-2 0 } UP 8e1-card > { shelf-1 slot-3 0 } UP 192hdlc-card > { shelf-1 slot-4 0 } UP 48modem-56k-card > { shelf-1 slot-5 } OCCUPIED > { shelf-1 slot-6 0 } UP 48modem-56k-card > { shelf-1 slot-7 } OCCUPIED > { shelf-1 slot-8 0 } UP 48modem-56k-card > { shelf-1 slot-9 } OCCUPIED > { shelf-1 slot-10 0 } UP 48modem-56k-card > { shelf-1 slot-11 } OCCUPIED > { shelf-1 slot-12 0 } UP 48modem-56k-card > { shelf-1 slot-13 } OCCUPIED > { shelf-1 slot-14 0 } UP 48modem-56k-card > { shelf-1 slot-15 } OCCUPIED The TNT is in general _far_ more robust than any 4000. It will handle load much better, providing you use currently-supported cards. Some of the older cards were awful and will cause you pain and suffering. From the TAOS 9.0.0 release note: Notice of discontinuance of software support Software support has been discontinued for the MAX TNT Ethernet-0 slot card (TNT-SL-E10), the Fast (100 MB) Ethernet-1 slot card (TNT-SL-E100), and the older MAX TNT Hybrid Access slot cards (TNT-SL-HA128 and TNT-SL-HA192). This means that if you have any of these cards you'll never be able to upgrade your TNT beyond 7.x. You don't want that. The 192hdlc-card you list is not robust, reliable, or even supported in TAOS 8.0. You don't want one. Then you need to look at how many concurrent ISDN sessions you'll have and use an HDLC card (or cards) with enough processors. I don't know what a 4/1ether-card's actual model number is, but I think it's a problematic card too. I haven't used the dual-slot 56-modem cards, but even if they're reliable I'd be concerned that they're using up almost all your slots. Will you need another 8-E1 card? Or a channelized DS-3 card? Are you prepared to go to a multi-shelf system to add more than one more card? I'm not aware of any issues with the 8-E1 card, but then I'm in the U.S. We haven't had any troubles with the 8-T1 card, FWIW. I'm also not sure if the 16 A power supplies are the High Output supplies, but that's what you want there. Hint: they're not cheap. HTH. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Tue Oct 24 11:56:49 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] Re: (ASCEND) Chosing TNT In-Reply-To: <200010240545.WAA05133@max.bungi.com> References: <200010240545.WAA05133@max.bungi.com> Message-ID: >From: "Danko Jevtovic" > >We are using MAX4060 E1 units for ISDN/analog dial-in for our ISP in Europe >and we plan to purchase used Max TNT. We have offer for such unit fully >loaded for 8 E1 dial in lines. I have following specification and we where >promised to receive R2-CAS signalization with the unit. > >As I do not have any experience with TNT (only with MAX4000) I need help >from list members in order to technically evaluate this offer. I know that >TNT has some issued as series I/II/II modem card, limit on number of HDSL >channels, etc. We need it to fully utilize 8 E1 lines for dial-in with mixed >R2 and ISDN signaling and we expect 100% load (all lines busy) every night. >Is this configuration adequate for the task and up to date technically? > >*** MAX TNT with Dual PS 16 A, AC 250V *** >admin> sh >Shelf 1 ( standalone ): > { shelf-1 slot-1 0 } UP 4/1ether-card > { shelf-1 slot-2 0 } UP 8e1-card > { shelf-1 slot-3 0 } UP 192hdlc-card > { shelf-1 slot-4 0 } UP 48modem-56k-card > { shelf-1 slot-5 } OCCUPIED > { shelf-1 slot-6 0 } UP 48modem-56k-card > { shelf-1 slot-7 } OCCUPIED > { shelf-1 slot-8 0 } UP 48modem-56k-card > { shelf-1 slot-9 } OCCUPIED > { shelf-1 slot-10 0 } UP 48modem-56k-card > { shelf-1 slot-11 } OCCUPIED > { shelf-1 slot-12 0 } UP 48modem-56k-card > { shelf-1 slot-13 } OCCUPIED > { shelf-1 slot-14 0 } UP 48modem-56k-card > { shelf-1 slot-15 } OCCUPIED The TNT is in general _far_ more robust than any 4000. It will handle load much better, providing you use currently-supported cards. Some of the older cards were awful and will cause you pain and suffering. From the TAOS 9.0.0 release note: Notice of discontinuance of software support Software support has been discontinued for the MAX TNT Ethernet-0 slot card (TNT-SL-E10), the Fast (100 MB) Ethernet-1 slot card (TNT-SL-E100), and the older MAX TNT Hybrid Access slot cards (TNT-SL-HA128 and TNT-SL-HA192). This means that if you have any of these cards you'll never be able to upgrade your TNT beyond 7.x. You don't want that. The 192hdlc-card you list is not robust, reliable, or even supported in TAOS 8.0. You don't want one. Then you need to look at how many concurrent ISDN sessions you'll have and use an HDLC card (or cards) with enough processors. I don't know what a 4/1ether-card's actual model number is, but I think it's a problematic card too. I haven't used the dual-slot 56-modem cards, but even if they're reliable I'd be concerned that they're using up almost all your slots. Will you need another 8-E1 card? Or a channelized DS-3 card? Are you prepared to go to a multi-shelf system to add more than one more card? I'm not aware of any issues with the 8-E1 card, but then I'm in the U.S. We haven't had any troubles with the 8-T1 card, FWIW. I'm also not sure if the 16 A power supplies are the High Output supplies, but that's what you want there. Hint: they're not cheap. HTH. -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From shaavik at soc.lib.md.us Tue Oct 24 13:12:07 2000 From: shaavik at soc.lib.md.us (Steve Haavik) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] Re: (ASCEND) Chosing TNT References: <200010240545.WAA05133@max.bungi.com> Message-ID: <39F5D0F7.3C363BC8@soc.lib.md.us> I'm not sure, but I believe support for the 4/1ether-card and 192hdlc-card was dropped in 8.0. I suggest checking the release notes to make sure the other cards are still supported. I do seem to remember some modem cards being dropped at some point too. You'll also want to know what size flash and dram cards it comes with. 9.0 requires 32 megs of flash and I think it's required 32 megs of dram since 7.0. -- Steve Haavik Sailor Operations Center shaavik@soc.lib.md.us Office: 410-396-5551 Cell: 443-829-1532 Pager: 443-829-1532 or 4438291532@page.nextel.com or pshaavik@soc.lib.md.us ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From shaavik at soc.lib.md.us Tue Oct 24 13:12:07 2000 From: shaavik at soc.lib.md.us (Steve Haavik) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] Re: (ASCEND) Chosing TNT References: <200010240545.WAA05133@max.bungi.com> Message-ID: <39F5D0F7.3C363BC8@soc.lib.md.us> I'm not sure, but I believe support for the 4/1ether-card and 192hdlc-card was dropped in 8.0. I suggest checking the release notes to make sure the other cards are still supported. I do seem to remember some modem cards being dropped at some point too. You'll also want to know what size flash and dram cards it comes with. 9.0 requires 32 megs of flash and I think it's required 32 megs of dram since 7.0. -- Steve Haavik Sailor Operations Center shaavik@soc.lib.md.us Office: 410-396-5551 Cell: 443-829-1532 Pager: 443-829-1532 or 4438291532@page.nextel.com or pshaavik@soc.lib.md.us ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From aspicer at ifxcorp.com Tue Oct 24 13:38:11 2000 From: aspicer at ifxcorp.com (Alan Spicer) Date: Tue Jan 18 13:59:32 2005 Subject: [Ascend] Re: (ASCEND) Chosing TNT References: Message-ID: <0010241441060C.00422@sparky> * The E1 cards have been fine for us. The only issue ... I wrote to him seperately ... I believe he is saying that he wants to do both R2 and ISDN PRI inbound trunks. I know we had to buy hash code for the "other" when we had one of those two. Then I think I remember discovering that you couldn't do R2 and ISDN PRI e1's on the same E1 card. Which means adding another E1 card. (correct me if I am wrong there). On Tue, 24 Oct 2000, Peter Lalor wrote: > >From: "Danko Jevtovic" > > > >We are using MAX4060 E1 units for ISDN/analog dial-in for our ISP in Europe > >and we plan to purchase used Max TNT. We have offer for such unit fully > >loaded for 8 E1 dial in lines. I have following specification and we where > >promised to receive R2-CAS signalization with the unit. > > > >As I do not have any experience with TNT (only with MAX4000) I need help > >from list members in order to technically evaluate this offer. I know that > >TNT has some issued as series I/II/II modem card, limit on number of HDSL > >channels, etc. We need it to fully utilize 8 E1 lines for dial-in with mixed > >R2 and ISDN signaling and we expect 100% load (all lines busy) every night. > >Is this configuration adequate for the task and up to date technically? > > > >*** MAX TNT with Dual PS 16 A, AC 250V *** > >admin> sh > >Shelf 1 ( standalone ): > > { shelf-1 slot-1 0 } UP 4/1ether-card > > { shelf-1 slot-2 0 } UP 8e1-card > > { shelf-1 slot-3 0 } UP 192hdlc-card > > { shelf-1 slot-4 0 } UP 48modem-56k-card > > { shelf-1 slot-5 } OCCUPIED > > { shelf-1 slot-6 0 } UP 48modem-56k-card > > { shelf-1 slot-7 } OCCUPIED > > { shelf-1 slot-8 0 } UP 48modem-56k-card > > { shelf-1 slot-9 } OCCUPIED > > { shelf-1 slot-10 0 } UP 48modem-56k-card > > { shelf-1 slot-11 } OCCUPIED > > { shelf-1 slot-12 0 } UP 48modem-56k-card > > { shelf-1 slot-13 } OCCUPIED > > { shelf-1 slot-14 0 } UP 48modem-56k-card > > { shelf-1 slot-15 } OCCUPIED > > The TNT is in general _far_ more robust than any 4000. It will handle > load much better, providing you use currently-supported cards. Some > of the older cards were awful and will cause you pain and suffering. > > From the TAOS 9.0.0 release note: > > Notice of discontinuance of software support > Software support has been discontinued for the MAX TNT Ethernet-0 > slot card (TNT-SL-E10), the Fast (100 MB) Ethernet-1 slot card > (TNT-SL-E100), and the older MAX TNT Hybrid Access slot cards > (TNT-SL-HA128 and TNT-SL-HA192). > > This means that if you have any of these cards you'll never be able > to upgrade your TNT beyond 7.x. You don't want that. > > The 192hdlc-card you list is not robust, reliable, or even supported > in TAOS 8.0. You don't want one. Then you need to look at how many > concurrent ISDN sessions you'll have and use an HDLC card (or cards) > with enough processors. > I don't know what a 4/1ether-card's actual model number is, but I > think it's a problematic card too. > I haven't used the dual-slot 56-modem cards, but even if they're > reliable I'd be concerned that they're using up almost all your > slots. Will you need another 8-E1 card? Or a channelized DS-3 card? > Are you prepared to go to a multi-shelf system to add more than one > more card? > I'm not aware of any issues with the 8-E1 card, but then I'm in the > U.S. We haven't had any troubles with the 8-T1 card, FWIW. > I'm also not sure if the 16 A power supplies are the High Output > supplies, but that's what you want there. Hint: they're not cheap. > > HTH. > -- > > Peter Lalor Infoasis > plalor@infoasis.com http://www.infoasis.com/ > > "Where's my burrito?" -- Homer > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: -- Alan Spicer (InterNIC:AGS14) Systems/Network Administration [grid square reference: HL65uv] ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From aspicer at ifxcorp.com Tue Oct 24 13:38:11 2000 From: aspicer at ifxcorp.com (Alan Spicer) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] Re: (ASCEND) Chosing TNT References: Message-ID: <0010241441060C.00422@sparky> * The E1 cards have been fine for us. The only issue ... I wrote to him seperately ... I believe he is saying that he wants to do both R2 and ISDN PRI inbound trunks. I know we had to buy hash code for the "other" when we had one of those two. Then I think I remember discovering that you couldn't do R2 and ISDN PRI e1's on the same E1 card. Which means adding another E1 card. (correct me if I am wrong there). On Tue, 24 Oct 2000, Peter Lalor wrote: > >From: "Danko Jevtovic" > > > >We are using MAX4060 E1 units for ISDN/analog dial-in for our ISP in Europe > >and we plan to purchase used Max TNT. We have offer for such unit fully > >loaded for 8 E1 dial in lines. I have following specification and we where > >promised to receive R2-CAS signalization with the unit. > > > >As I do not have any experience with TNT (only with MAX4000) I need help > >from list members in order to technically evaluate this offer. I know that > >TNT has some issued as series I/II/II modem card, limit on number of HDSL > >channels, etc. We need it to fully utilize 8 E1 lines for dial-in with mixed > >R2 and ISDN signaling and we expect 100% load (all lines busy) every night. > >Is this configuration adequate for the task and up to date technically? > > > >*** MAX TNT with Dual PS 16 A, AC 250V *** > >admin> sh > >Shelf 1 ( standalone ): > > { shelf-1 slot-1 0 } UP 4/1ether-card > > { shelf-1 slot-2 0 } UP 8e1-card > > { shelf-1 slot-3 0 } UP 192hdlc-card > > { shelf-1 slot-4 0 } UP 48modem-56k-card > > { shelf-1 slot-5 } OCCUPIED > > { shelf-1 slot-6 0 } UP 48modem-56k-card > > { shelf-1 slot-7 } OCCUPIED > > { shelf-1 slot-8 0 } UP 48modem-56k-card > > { shelf-1 slot-9 } OCCUPIED > > { shelf-1 slot-10 0 } UP 48modem-56k-card > > { shelf-1 slot-11 } OCCUPIED > > { shelf-1 slot-12 0 } UP 48modem-56k-card > > { shelf-1 slot-13 } OCCUPIED > > { shelf-1 slot-14 0 } UP 48modem-56k-card > > { shelf-1 slot-15 } OCCUPIED > > The TNT is in general _far_ more robust than any 4000. It will handle > load much better, providing you use currently-supported cards. Some > of the older cards were awful and will cause you pain and suffering. > > From the TAOS 9.0.0 release note: > > Notice of discontinuance of software support > Software support has been discontinued for the MAX TNT Ethernet-0 > slot card (TNT-SL-E10), the Fast (100 MB) Ethernet-1 slot card > (TNT-SL-E100), and the older MAX TNT Hybrid Access slot cards > (TNT-SL-HA128 and TNT-SL-HA192). > > This means that if you have any of these cards you'll never be able > to upgrade your TNT beyond 7.x. You don't want that. > > The 192hdlc-card you list is not robust, reliable, or even supported > in TAOS 8.0. You don't want one. Then you need to look at how many > concurrent ISDN sessions you'll have and use an HDLC card (or cards) > with enough processors. > I don't know what a 4/1ether-card's actual model number is, but I > think it's a problematic card too. > I haven't used the dual-slot 56-modem cards, but even if they're > reliable I'd be concerned that they're using up almost all your > slots. Will you need another 8-E1 card? Or a channelized DS-3 card? > Are you prepared to go to a multi-shelf system to add more than one > more card? > I'm not aware of any issues with the 8-E1 card, but then I'm in the > U.S. We haven't had any troubles with the 8-T1 card, FWIW. > I'm also not sure if the 16 A power supplies are the High Output > supplies, but that's what you want there. Hint: they're not cheap. > > HTH. > -- > > Peter Lalor Infoasis > plalor@infoasis.com http://www.infoasis.com/ > > "Where's my burrito?" -- Homer > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: -- Alan Spicer (InterNIC:AGS14) Systems/Network Administration [grid square reference: HL65uv] ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mlevans at blacksburg.net Tue Oct 24 13:16:05 2000 From: mlevans at blacksburg.net (Lyle Evans) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) FS: rackmount brackets for Ascend & other equipment Message-ID: <3.0.5.32.20001024141605.007c4b00@pop.blacksburg.net> We are selling rackear kits for Ascend 4xxx, and Ascend 1800, We are also selling generic rackears kits for rackmount equipment, in 1U to 6U sizes, and rackears for some models of Cisco, 3comm, Livingston and other brands of networking equipment. Prices range from $23.00 to $50.00 per pair, depending on model plus $7.00 handling per order. For further information and to order please visit: http://www.rackears.com/ Thank you, Lyle Evans lyle@rackears.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From mlevans at blacksburg.net Tue Oct 24 13:16:05 2000 From: mlevans at blacksburg.net (Lyle Evans) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) FS: rackmount brackets for Ascend & other equipment Message-ID: <3.0.5.32.20001024141605.007c4b00@pop.blacksburg.net> We are selling rackear kits for Ascend 4xxx, and Ascend 1800, We are also selling generic rackears kits for rackmount equipment, in 1U to 6U sizes, and rackears for some models of Cisco, 3comm, Livingston and other brands of networking equipment. Prices range from $23.00 to $50.00 per pair, depending on model plus $7.00 handling per order. For further information and to order please visit: http://www.rackears.com/ Thank you, Lyle Evans lyle@rackears.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jmayes at csc-service.com Thu Oct 26 01:01:58 2000 From: jmayes at csc-service.com (Joe Mayes) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) Pipeline 130 won't connect to ISDN ISP service Message-ID: This Pipeline 130 has worked for almost a year, no problems. Last Friday, connection dropped. Autoredial to the ISDN #, tries to connect for 1 second, then disconnects. Change to alternate number, tries to connect for 45 seconds then disconnects. Both disconnects are code 16. My telco provider sniffed and found the 45-second cycle connected, did a good handshake then my router sent a disconnect message 14 seconds into the connection. Suspicion is bad authentication, but everything checks OK by configuration. Any ideas? It's been 6 days without connectivity for this customer, Joseph M. Mayes Computer Service Corporation 14804 NE 31st Circle Redmond, WA 98052 425-869-7777 Fax 869-7878 Your solution provider for Novell, Microsoft, Cisco and more ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tom at rydrcom.com Wed Oct 25 11:32:42 2000 From: tom at rydrcom.com (Tom Ryder) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) Used Equipment Requirements Message-ID: Hello, RYDRCOM has an immediate need to purchase the following used data communications equipment: Adtran TSU DSU/CSUs Cisco 70/72/75XX Routers and Modules Paradyne 316X DSU/CSUs This email was sent in mass to every uncategorized contact in my address book. If it pertains to you, I look forward to your reply. If it does not, I apologize for the interruption. Thank you. Tom Ryder RYDER Communications, Inc. 10 Peary Drive Sussex, NJ 07461-4006 Tel. 973-702-7781 / 1-877-RYDRCOM Fax. 973-702-8406 / 1-877-RYDRFAX tom@rydrcom.com www.rydrcom.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jmayes at csc-service.com Thu Oct 26 01:01:58 2000 From: jmayes at csc-service.com (Joe Mayes) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) Pipeline 130 won't connect to ISDN ISP service Message-ID: This Pipeline 130 has worked for almost a year, no problems. Last Friday, connection dropped. Autoredial to the ISDN #, tries to connect for 1 second, then disconnects. Change to alternate number, tries to connect for 45 seconds then disconnects. Both disconnects are code 16. My telco provider sniffed and found the 45-second cycle connected, did a good handshake then my router sent a disconnect message 14 seconds into the connection. Suspicion is bad authentication, but everything checks OK by configuration. Any ideas? It's been 6 days without connectivity for this customer, Joseph M. Mayes Computer Service Corporation 14804 NE 31st Circle Redmond, WA 98052 425-869-7777 Fax 869-7878 Your solution provider for Novell, Microsoft, Cisco and more ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tom at rydrcom.com Wed Oct 25 11:32:42 2000 From: tom at rydrcom.com (Tom Ryder) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) Used Equipment Requirements Message-ID: Hello, RYDRCOM has an immediate need to purchase the following used data communications equipment: Adtran TSU DSU/CSUs Cisco 70/72/75XX Routers and Modules Paradyne 316X DSU/CSUs This email was sent in mass to every uncategorized contact in my address book. If it pertains to you, I look forward to your reply. If it does not, I apologize for the interruption. Thank you. Tom Ryder RYDER Communications, Inc. 10 Peary Drive Sussex, NJ 07461-4006 Tel. 973-702-7781 / 1-877-RYDRCOM Fax. 973-702-8406 / 1-877-RYDRFAX tom@rydrcom.com www.rydrcom.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From lukejj at hotmail.com Fri Oct 27 00:40:03 2000 From: lukejj at hotmail.com (luke johnson) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) tnt suspect modems Message-ID: Hi We have a couple of TNT's which are producing the message below. Upon looking at the suspect modem list I found that it contained close to 200 modems!! we only have 480 installed... I'm aware that 3 failed auth attempts will put the modem on the suspect list, however, it seems a bit excessive. (there are no modems on the failed list). We are running version 7.2.3, and are considering updating to ver 8.0.3, as I believe the TNT will only put the modems on a suspect list if they fail 8 time instead of three. Does anyone have any ideas or suggestions as to why we may be seeing so many modems put onto the suspect list? Trap(ascend-6.20) suspectLanModemSlotIndex.13.20=13 suspectLanModemPortIndex.13.20=20 suspectLanModemUsedCount.13.20=624 suspectLanModemBadCount.13.20=175 suspectLanModemLast32.13.20=4160618208 Thanks Luka _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From lukejj at hotmail.com Fri Oct 27 00:40:03 2000 From: lukejj at hotmail.com (luke johnson) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) tnt suspect modems Message-ID: Hi We have a couple of TNT's which are producing the message below. Upon looking at the suspect modem list I found that it contained close to 200 modems!! we only have 480 installed... I'm aware that 3 failed auth attempts will put the modem on the suspect list, however, it seems a bit excessive. (there are no modems on the failed list). We are running version 7.2.3, and are considering updating to ver 8.0.3, as I believe the TNT will only put the modems on a suspect list if they fail 8 time instead of three. Does anyone have any ideas or suggestions as to why we may be seeing so many modems put onto the suspect list? Trap(ascend-6.20) suspectLanModemSlotIndex.13.20=13 suspectLanModemPortIndex.13.20=20 suspectLanModemUsedCount.13.20=624 suspectLanModemBadCount.13.20=175 suspectLanModemLast32.13.20=4160618208 Thanks Luka _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From wayne at ojai.net Fri Oct 27 01:29:33 2000 From: wayne at ojai.net (Wayne Maynard) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) Max 4000 with PRI channel usage Message-ID: <39F920CD.4667D122@ojai.net> Connected a second 24 channel PRI to my Max 4000 today and have a question that I hope someone can help me with. The first PRI fills up the channels starting with number 1, then 2 and so on. When a lower number channel clears, it takes the next call before filling higher channel numbers. I like it this way seems very orderly. Anyway, the second PRI which is now activated allocates channels in asending numerical order until it goes through all channels, then starts off again at channel one. If a lower channel clears, it keeps filling higher channels until it works its way back to the first channel. As you can probably tell by my non-technical discription, I am not the system administrator, nor do I program the MAX, I just pay the bills and like to keep an eye on system usage. So my SysOp (we use to be a BBS) looked around and couldnt find a setting to change the way channels are allocated. Any help on how to change this setting will be appreciated, I will pass it on to my sysop. Thanks, Wayne Maynard Owner/Ojai.net (now 92 channels strong, and growing) ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From wayne at ojai.net Fri Oct 27 01:29:33 2000 From: wayne at ojai.net (Wayne Maynard) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) Max 4000 with PRI channel usage Message-ID: <39F920CD.4667D122@ojai.net> Connected a second 24 channel PRI to my Max 4000 today and have a question that I hope someone can help me with. The first PRI fills up the channels starting with number 1, then 2 and so on. When a lower number channel clears, it takes the next call before filling higher channel numbers. I like it this way seems very orderly. Anyway, the second PRI which is now activated allocates channels in asending numerical order until it goes through all channels, then starts off again at channel one. If a lower channel clears, it keeps filling higher channels until it works its way back to the first channel. As you can probably tell by my non-technical discription, I am not the system administrator, nor do I program the MAX, I just pay the bills and like to keep an eye on system usage. So my SysOp (we use to be a BBS) looked around and couldnt find a setting to change the way channels are allocated. Any help on how to change this setting will be appreciated, I will pass it on to my sysop. Thanks, Wayne Maynard Owner/Ojai.net (now 92 channels strong, and growing) ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From psc5 at powersupply.net Fri Oct 27 07:28:52 2000 From: psc5 at powersupply.net (psc5) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) PRI channels Message-ID: <26299200010527122852399@powersupply.net> I have several max 4K and 6K's running channelized T1's PRI were never available in our area before this. I am sure that my maxes are capable of a pri line, but in the Sys Option window it says PRI Not InSt. Is that some kind of setting insode the max that turns that on? I didn't think you needed a hash code for that, plus I was sure when I bought these they were supposed to be capable. Can someone help me? Thanks, John ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From psc5 at powersupply.net Fri Oct 27 07:28:52 2000 From: psc5 at powersupply.net (psc5) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) PRI channels Message-ID: <26299200010527122852399@powersupply.net> I have several max 4K and 6K's running channelized T1's PRI were never available in our area before this. I am sure that my maxes are capable of a pri line, but in the Sys Option window it says PRI Not InSt. Is that some kind of setting insode the max that turns that on? I didn't think you needed a hash code for that, plus I was sure when I bought these they were supposed to be capable. Can someone help me? Thanks, John ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From ahrens at pixelpark.com Fri Oct 27 09:19:49 2000 From: ahrens at pixelpark.com (Denis Ahrens) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] test Message-ID: <39F98F05.900C86E1@pixelpark.com> sorry, this is only a test -- Denis Ahrens Phone : +49.30.5058-1744 IT-Security Fax : +49.30.5058-1600 Pixelpark AG ahrens@pixelpark.com Rotherstr. 8, D-10245 Berlin http://www.pixelpark.com From ahrens at pixelpark.com Fri Oct 27 09:23:34 2000 From: ahrens at pixelpark.com (Denis Ahrens) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] Pipeline 50 Message-ID: <39F98FE6.2740ED6F@pixelpark.com> Hello I have a Pipeline 50 wich stops at the "Power-On Self Test with the message: Pipeline Power-On Self Test Halted: CONFIGURE UNIT! Tab and ctrl-l works but thats all. What can I do? Denis -- Denis Ahrens Phone : +49.30.5058-1744 IT-Security Fax : +49.30.5058-1600 Pixelpark AG ahrens@pixelpark.com Rotherstr. 8, D-10245 Berlin http://www.pixelpark.com From jmayes at csc-service.com Thu Oct 26 00:58:51 2000 From: jmayes at csc-service.com (Joe Mayes) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) resetting full access password on Ascend Pipeline 50 Message-ID: Sorry to be a bother, but what's the procedure for dumping the config on an abandoned Pipeline 50 so it can be reconfigured? jmayes@csc-service.com Joseph M. Mayes Computer Service Corporation 14804 NE 31st Circle Redmond, WA 98052 425-869-7777 Fax 869-7878 Your solution provider for Novell, Microsoft, Cisco and more ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jmayes at csc-service.com Thu Oct 26 00:58:51 2000 From: jmayes at csc-service.com (Joe Mayes) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) resetting full access password on Ascend Pipeline 50 Message-ID: Sorry to be a bother, but what's the procedure for dumping the config on an abandoned Pipeline 50 so it can be reconfigured? jmayes@csc-service.com Joseph M. Mayes Computer Service Corporation 14804 NE 31st Circle Redmond, WA 98052 425-869-7777 Fax 869-7878 Your solution provider for Novell, Microsoft, Cisco and more ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From brianv at cvtv.net Fri Oct 27 11:02:30 2000 From: brianv at cvtv.net (Brian Varner) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) Handing out DNS Message-ID: <006701c0402f$4f90bca0$250ba8c0@cvtv.net> I have a couple of 4048's, a 6096, and a TNT. We are going to go with a new upstream provider and consequently all new IP numbers. Right now we have our customers specify in the DUN our DNS server IP address. With the change forthcoming, is there a way for the MAX's (and TNT) to hand out a DNS IP address. That way we can start having our customers change their DUN to "server assigned name server addresses" and so when we do change the IP's on our end it won't be such a big ordeal ('course it will regardless, but anything will help). Appreciate any assistance- Brian Brian Varner Network Operations Manager Colorado Valley Telephone Cooperative (979) 247-8163 brianv@cvtv.net ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From hetzels at westbend.net Fri Oct 27 08:56:30 2000 From: hetzels at westbend.net (Scot W. Hetzel) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] Re: (ASCEND) Max 4000 with PRI channel usage References: <39F920CD.4667D122@ojai.net> Message-ID: <006001c0401d$b8800200$7d7885c0@genroco.com> From: "Wayne Maynard" > Anyway, the second PRI which is now activated allocates channels in > asending numerical order until it goes through all channels, then starts > off again at channel one. If a lower channel clears, it keeps filling > higher channels until it works its way back to the first channel. > > As you can probably tell by my non-technical discription, I am not the > system administrator, nor do I program the MAX, I just pay the bills and > like to keep an eye on system usage. So my SysOp (we use to be a BBS) > looked around and couldnt find a setting to change the way channels are > allocated. Any help on how to change this setting will be appreciated, > I will pass it on to my sysop. > There is no setting to change the way channels are allocated on your MAX. This channel allocation is done at the TELCO, they would have to change it. Scot ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From brianv at cvtv.net Fri Oct 27 11:02:30 2000 From: brianv at cvtv.net (Brian Varner) Date: Tue Jan 18 13:59:33 2005 Subject: [Ascend] (ASCEND) Handing out DNS Message-ID: <006701c0402f$4f90bca0$250ba8c0@cvtv.net> I have a couple of 4048's, a 6096, and a TNT. We are going to go with a new upstream provider and consequently all new IP numbers. Right now we have our customers specify in the DUN our DNS server IP address. With the change forthcoming, is there a way for the MAX's (and TNT) to hand out a DNS IP address. That way we can start having our customers change their DUN to "server assigned name server addresses" and so when we do change the IP's on our end it won't be such a big ordeal ('course it will regardless, but anything will help). Appreciate any assistance- Brian Brian Varner Network Operations Manager Colorado Valley Telephone Cooperative (979) 247-8163 brianv@cvtv.net ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From vandry at TZoNE.ORG Fri Oct 27 11:19:02 2000 From: vandry at TZoNE.ORG (Phillip Vandry) Date: Tue Jan 18 13:59:34 2005 Subject: [Ascend] Re: (ASCEND) Max 4000 with PRI channel usage In-Reply-To: Your message of "Thu, 26 Oct 2000 23:29:33 EDT." <39F920CD.4667D122@ojai.net> Message-ID: <200010271619.MAA26033@Iodine.Mlink.NET> > As you can probably tell by my non-technical discription, I am not the > system administrator, nor do I program the MAX, I just pay the bills and > like to keep an eye on system usage. So my SysOp (we use to be a BBS) > looked around and couldnt find a setting to change the way channels are > allocated. Any help on how to change this setting will be appreciated, > I will pass it on to my sysop. This is controlled by your telco, but it hardly makes any difference, so I don't recommend you have it changed. If you are worried about getting the modems on the Max being used in a uniform fashion, the Max takes care of that anyway, regardless of which physical channels the calls come in on. (In fact the configuration of your second PRI is probably slightly better because it alternates which channels will be used more often, so if there was a problem with one channel it could be worked around by redialing) -Phil ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From hetzels at westbend.net Fri Oct 27 08:56:30 2000 From: hetzels at westbend.net (Scot W. Hetzel) Date: Tue Jan 18 13:59:34 2005 Subject: [Ascend] Re: (ASCEND) Max 4000 with PRI channel usage References: <39F920CD.4667D122@ojai.net> Message-ID: <006001c0401d$b8800200$7d7885c0@genroco.com> From: "Wayne Maynard" > Anyway, the second PRI which is now activated allocates channels in > asending numerical order until it goes through all channels, then starts > off again at channel one. If a lower channel clears, it keeps filling > higher channels until it works its way back to the first channel. > > As you can probably tell by my non-technical discription, I am not the > system administrator, nor do I program the MAX, I just pay the bills and > like to keep an eye on system usage. So my SysOp (we use to be a BBS) > looked around and couldnt find a setting to change the way channels are > allocated. Any help on how to change this setting will be appreciated, > I will pass it on to my sysop. > There is no setting to change the way channels are allocated on your MAX. This channel allocation is done at the TELCO, they would have to change it. Scot ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From guido at ipa.net Fri Oct 27 11:14:24 2000 From: guido at ipa.net (Dave Montgomery) Date: Tue Jan 18 13:59:34 2005 Subject: [Ascend] RE: (ASCEND) Max 4000 with PRI channel usage In-Reply-To: <39F920CD.4667D122@ojai.net> Message-ID: It's a telco setting not a max setting. You can usually request whichever hunt type you like but I'm not sure what it's called. They should be able to figure it out though if you tell then you want it to hunt like the first one. ---Dave Montgomery IPA Network Technician 501-784-0148 -----Original Message----- From: owner-ascend-users@max.bungi.com [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Wayne Maynard Sent: Friday, October 27, 2000 1:30 AM To: Ascend List Serve Subject: (ASCEND) Max 4000 with PRI channel usage Connected a second 24 channel PRI to my Max 4000 today and have a question that I hope someone can help me with. The first PRI fills up the channels starting with number 1, then 2 and so on. When a lower number channel clears, it takes the next call before filling higher channel numbers. I like it this way seems very orderly. Anyway, the second PRI which is now activated allocates channels in asending numerical order until it goes through all channels, then starts off again at channel one. If a lower channel clears, it keeps filling higher channels until it works its way back to the first channel. As you can probably tell by my non-technical discription, I am not the system administrator, nor do I program the MAX, I just pay the bills and like to keep an eye on system usage. So my SysOp (we use to be a BBS) looked around and couldnt find a setting to change the way channels are allocated. Any help on how to change this setting will be appreciated, I will pass it on to my sysop. Thanks, Wayne Maynard Owner/Ojai.net (now 92 channels strong, and growing) ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From vandry at TZoNE.ORG Fri Oct 27 11:19:02 2000 From: vandry at TZoNE.ORG (Phillip Vandry) Date: Tue Jan 18 13:59:34 2005 Subject: [Ascend] Re: (ASCEND) Max 4000 with PRI channel usage In-Reply-To: Your message of "Thu, 26 Oct 2000 23:29:33 EDT." <39F920CD.4667D122@ojai.net> Message-ID: <200010271619.MAA26033@Iodine.Mlink.NET> > As you can probably tell by my non-technical discription, I am not the > system administrator, nor do I program the MAX, I just pay the bills and > like to keep an eye on system usage. So my SysOp (we use to be a BBS) > looked around and couldnt find a setting to change the way channels are > allocated. Any help on how to change this setting will be appreciated, > I will pass it on to my sysop. This is controlled by your telco, but it hardly makes any difference, so I don't recommend you have it changed. If you are worried about getting the modems on the Max being used in a uniform fashion, the Max takes care of that anyway, regardless of which physical channels the calls come in on. (In fact the configuration of your second PRI is probably slightly better because it alternates which channels will be used more often, so if there was a problem with one channel it could be worked around by redialing) -Phil ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From guido at ipa.net Fri Oct 27 11:14:24 2000 From: guido at ipa.net (Dave Montgomery) Date: Tue Jan 18 13:59:34 2005 Subject: [Ascend] RE: (ASCEND) Max 4000 with PRI channel usage In-Reply-To: <39F920CD.4667D122@ojai.net> Message-ID: It's a telco setting not a max setting. You can usually request whichever hunt type you like but I'm not sure what it's called. They should be able to figure it out though if you tell then you want it to hunt like the first one. ---Dave Montgomery IPA Network Technician 501-784-0148 -----Original Message----- From: owner-ascend-users@max.bungi.com [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Wayne Maynard Sent: Friday, October 27, 2000 1:30 AM To: Ascend List Serve Subject: (ASCEND) Max 4000 with PRI channel usage Connected a second 24 channel PRI to my Max 4000 today and have a question that I hope someone can help me with. The first PRI fills up the channels starting with number 1, then 2 and so on. When a lower number channel clears, it takes the next call before filling higher channel numbers. I like it this way seems very orderly. Anyway, the second PRI which is now activated allocates channels in asending numerical order until it goes through all channels, then starts off again at channel one. If a lower channel clears, it keeps filling higher channels until it works its way back to the first channel. As you can probably tell by my non-technical discription, I am not the system administrator, nor do I program the MAX, I just pay the bills and like to keep an eye on system usage. So my SysOp (we use to be a BBS) looked around and couldnt find a setting to change the way channels are allocated. Any help on how to change this setting will be appreciated, I will pass it on to my sysop. Thanks, Wayne Maynard Owner/Ojai.net (now 92 channels strong, and growing) ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From patrick at pa.net Fri Oct 27 12:58:48 2000 From: patrick at pa.net (Patrick Haller) Date: Tue Jan 18 13:59:34 2005 Subject: [Ascend] (ASCEND) suspect modems? In-Reply-To: <200010271701.e9RH1BG23836@sprite.real-time.com> Message-ID: <200010271759.e9RHx0m23396@admin.md.net> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 It sounds like you have a bad DS1. When your tnt is heavily used, do a 'line' and see if there are any DS1s that have nobody on them or all connections fail. We are currently experiencing this w/ 8.0.3., and have had to turn off two of our PRIs while lucent tech gods think. Patrick. +-- Patrick Haller +1 717 249 7270 Network Administrator PAdotNET http://www.pa.net -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.2 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE5+cJbkHdQKFYPBSMRAh/KAJ48PEcnEAvtXiEPrYWunsC8OMw9KgCfYGk/ 5cw15VVwcDIUPfiaEVuBitk= =3H74 -----END PGP SIGNATURE----- ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From patrick at pa.net Fri Oct 27 12:58:48 2000 From: patrick at pa.net (Patrick Haller) Date: Tue Jan 18 13:59:34 2005 Subject: [Ascend] (ASCEND) suspect modems? In-Reply-To: <200010271701.e9RH1BG23836@sprite.real-time.com> Message-ID: <200010271759.e9RHx0m23396@admin.md.net> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 It sounds like you have a bad DS1. When your tnt is heavily used, do a 'line' and see if there are any DS1s that have nobody on them or all connections fail. We are currently experiencing this w/ 8.0.3., and have had to turn off two of our PRIs while lucent tech gods think. Patrick. +-- Patrick Haller +1 717 249 7270 Network Administrator PAdotNET http://www.pa.net -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.2 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE5+cJbkHdQKFYPBSMRAh/KAJ48PEcnEAvtXiEPrYWunsC8OMw9KgCfYGk/ 5cw15VVwcDIUPfiaEVuBitk= =3H74 -----END PGP SIGNATURE----- ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From aspicer at ifxcorp.com Fri Oct 27 13:24:25 2000 From: aspicer at ifxcorp.com (Alan Spicer) Date: Tue Jan 18 13:59:34 2005 Subject: [Ascend] Re: (ASCEND) Handing out DNS References: <006701c0402f$4f90bca0$250ba8c0@cvtv.net> Message-ID: <00102714275508.08792@sparky> * In TNT "read ip-global" to get the IP-GLOBAL profile. Then "list", the settings are: client-primary-dns-server = x.x.x.x client-secondary-dns-server = x.x.x.x (where x's are your dns server ip addresses). I believe this same thing is also possible in Max's. Yes! "Ethernet > Mod Config > DNS" profile. On Fri, 27 Oct 2000, Brian Varner wrote: > I have a couple of 4048's, a 6096, and a TNT. We are going to go with a new > upstream provider and consequently all new IP numbers. Right now we have > our customers specify in the DUN our DNS server IP address. With the change > forthcoming, is there a way for the MAX's (and TNT) to hand out a DNS IP > address. That way we can start having our customers change their DUN to > "server assigned name server addresses" and so when we do change the IP's on > our end it won't be such a big ordeal ('course it will regardless, but > anything will help). > Appreciate any assistance- > Brian > > > > Brian Varner > Network Operations Manager > Colorado Valley Telephone Cooperative > (979) 247-8163 > brianv@cvtv.net > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: -- Alan Spicer (InterNIC:AGS14) Systems/Network Administration aspicer@ifxcorp.com 202715973/status rasactivations@ifxcorp.com [Checklist] [grid square reference: HL65uv] Tel: +1 305-512-1100 x134 Cel: +1 305-525-5914 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From baron at lava.net Fri Oct 27 13:52:09 2000 From: baron at lava.net (Baron Fujimoto) Date: Tue Jan 18 13:59:34 2005 Subject: [Ascend] (ASCEND) what constitutes a "bad" call? Message-ID: does anyone know what constitutes a "bad" call in the avm statistics in diagnostic mode on the MAX's? ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From aspicer at ifxcorp.com Fri Oct 27 13:24:25 2000 From: aspicer at ifxcorp.com (Alan Spicer) Date: Tue Jan 18 13:59:34 2005 Subject: [Ascend] Re: (ASCEND) Handing out DNS References: <006701c0402f$4f90bca0$250ba8c0@cvtv.net> Message-ID: <00102714275508.08792@sparky> * In TNT "read ip-global" to get the IP-GLOBAL profile. Then "list", the settings are: client-primary-dns-server = x.x.x.x client-secondary-dns-server = x.x.x.x (where x's are your dns server ip addresses). I believe this same thing is also possible in Max's. Yes! "Ethernet > Mod Config > DNS" profile. On Fri, 27 Oct 2000, Brian Varner wrote: > I have a couple of 4048's, a 6096, and a TNT. We are going to go with a new > upstream provider and consequently all new IP numbers. Right now we have > our customers specify in the DUN our DNS server IP address. With the change > forthcoming, is there a way for the MAX's (and TNT) to hand out a DNS IP > address. That way we can start having our customers change their DUN to > "server assigned name server addresses" and so when we do change the IP's on > our end it won't be such a big ordeal ('course it will regardless, but > anything will help). > Appreciate any assistance- > Brian > > > > Brian Varner > Network Operations Manager > Colorado Valley Telephone Cooperative > (979) 247-8163 > brianv@cvtv.net > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: -- Alan Spicer (InterNIC:AGS14) Systems/Network Administration aspicer@ifxcorp.com 202715973/status rasactivations@ifxcorp.com [Checklist] [grid square reference: HL65uv] Tel: +1 305-512-1100 x134 Cel: +1 305-525-5914 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From baron at lava.net Fri Oct 27 13:52:09 2000 From: baron at lava.net (Baron Fujimoto) Date: Tue Jan 18 13:59:35 2005 Subject: [Ascend] (ASCEND) what constitutes a "bad" call? Message-ID: does anyone know what constitutes a "bad" call in the avm statistics in diagnostic mode on the MAX's? ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tanner at real-time.com Sat Oct 28 00:26:27 2000 From: tanner at real-time.com (Bob Tanner) Date: Tue Jan 18 13:59:35 2005 Subject: [Ascend] Testing Message-ID: <20001028002627.B10686@real-time.com> Testing. -- Bob Tanner | Phone : (612)943-8700 http://www.mn-linux.org | Fax : (612)943-8500 Key fingerprint = 6C E9 51 4F D5 3E 4C 66 62 A9 10 E5 35 85 39 D9 From ahakim at link.net Sun Oct 29 01:42:10 2000 From: ahakim at link.net (Ahmed El-Hakim) Date: Tue Jan 18 13:59:35 2005 Subject: [Ascend] (ASCEND) RE: Pipeline50 Message-ID: <001801c0417b$bee2eea0$094783d5@salec.com.eg> Denis, It seems that your unit lost its serial number and that is maybe due to incorrect update command. Send the serial number of your pipe to ascend help and attache this message and they will feedback with an update command which will recover this problem. > Hello >h >I have a Pipeline 50 wich stops at the "Power-On Self Test with the >message: > >Pipeline >Power-On Self Test >Halted: >CONFIGURE UNIT! > >Tab and ctrl-l works but thats all. > >What can I do? > >Denis > >-- >Denis Ahrens Phone : +49.30.5058-1744 >IT-Security Fax : +49.30.5058-1600 >Pixelpark AG ahrens@pixelpark.com >Rotherstr. 8, D-10245 Berlin http://www.pixelpark.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20001029/7ba9da03/attachment.htm From zimage at delbg.com Sun Oct 29 12:33:47 2000 From: zimage at delbg.com (Theodor Milkov) Date: Tue Jan 18 13:59:35 2005 Subject: [Ascend] Ascend MAX 6000 and USRobotics sportster Message-ID: <39FC6D8B.27363BF0@delbg.com> Hello list, there we have a MAX 6000 connected to a E1 with R2 signaling and some of our customers (most of them are USR Sportsters) reports some kind of "freezes". This "freeze" often occurs after 5-10 minutes of on-line time, and nothing helps except disconnect/connect again. Strange is that modem stays connected but nothing passes on (only Tx flashes a bit). The unit is: MAX 6000, TAOS 8.0.3, E1/R2 CZECH Type. Customers are mostly 3Com/USR users. egards -- =- --rw------- =--=--=--=--=--=--=--=--=--=--=--=--=--= Theodor Milkov Administrator IP Networks Davidov Electric Ltd. Phone: +359 (2) 730158 PGP: http://www.zimage.delbg.com/zimage.asc =--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--= From shovey at buffnet.net Sun Oct 29 19:55:33 2000 From: shovey at buffnet.net (Stephen Hovey) Date: Tue Jan 18 13:59:35 2005 Subject: [Ascend] (ASCEND) Weird traffic stalls Message-ID: I emailed on this a couple of weeks ago - about my ascends acting hoky round rush hour with stalled logins or Ip assignments that could pass packets.. Ive noted that if I go into my router and clear the arp-cache - it clears up - so someone must be doing something hokey but Im not sure where to look - any ideas? ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From shovey at buffnet.net Sun Oct 29 19:55:33 2000 From: shovey at buffnet.net (Stephen Hovey) Date: Tue Jan 18 13:59:35 2005 Subject: [Ascend] (ASCEND) Weird traffic stalls Message-ID: I emailed on this a couple of weeks ago - about my ascends acting hoky round rush hour with stalled logins or Ip assignments that could pass packets.. Ive noted that if I go into my router and clear the arp-cache - it clears up - so someone must be doing something hokey but Im not sure where to look - any ideas? ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From rocca at multiboard.com Sun Oct 29 22:30:43 2000 From: rocca at multiboard.com (Peter Rocca) Date: Tue Jan 18 13:59:35 2005 Subject: [Ascend] (ASCEND) what constitutes a "bad" call? In-Reply-To: <200010280545.WAA27580@max.bungi.com> Message-ID: <00b401c0422a$2ab357b0$0179a8c0@multiboard.com> Heh, that depends who you ask. In my experience and testing (and also the Ascend documentation) anything that doesn't end in a successful session starting is logged as a bad call. This includes things such as bad passwords, access denied due to radius settings, or your radius servers being down or unreachable. > From: Baron Fujimoto > Date: Fri, 27 Oct 2000 08:52:09 -1000 (HST) > Subject: (ASCEND) what constitutes a "bad" call? > > does anyone know what constitutes a "bad" call in the avm statistics in > diagnostic mode on the MAX's? ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From rocca at multiboard.com Sun Oct 29 22:30:43 2000 From: rocca at multiboard.com (Peter Rocca) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] (ASCEND) what constitutes a "bad" call? In-Reply-To: <200010280545.WAA27580@max.bungi.com> Message-ID: <00b401c0422a$2ab357b0$0179a8c0@multiboard.com> Heh, that depends who you ask. In my experience and testing (and also the Ascend documentation) anything that doesn't end in a successful session starting is logged as a bad call. This includes things such as bad passwords, access denied due to radius settings, or your radius servers being down or unreachable. > From: Baron Fujimoto > Date: Fri, 27 Oct 2000 08:52:09 -1000 (HST) > Subject: (ASCEND) what constitutes a "bad" call? > > does anyone know what constitutes a "bad" call in the avm statistics in > diagnostic mode on the MAX's? ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From sbarden at seekercomm.net Sun Oct 29 21:06:28 2000 From: sbarden at seekercomm.net (Steve B. - Seeker) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] Re: (ASCEND) Weird traffic stalls Message-ID: <001a01c0421e$660f3a60$dbf8c23f@machine> If no one else gets thrown into a mexican jail -----Original Message----- From: Stephen Hovey To: ascend-users@bungi.com Date: Sunday, October 29, 2000 6:25 AM Subject: (ASCEND) Weird traffic stalls > >I emailed on this a couple of weeks ago - about my ascends acting hoky >round rush hour with stalled logins or Ip assignments that could pass >packets.. > >Ive noted that if I go into my router and clear the arp-cache - it clears >up - so someone must be doing something hokey but Im not sure where to >look - any ideas? > >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From sbarden at seekercomm.net Sun Oct 29 21:06:28 2000 From: sbarden at seekercomm.net (Steve B. - Seeker) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] Re: (ASCEND) Weird traffic stalls Message-ID: <001a01c0421e$660f3a60$dbf8c23f@machine> If no one else gets thrown into a mexican jail -----Original Message----- From: Stephen Hovey To: ascend-users@bungi.com Date: Sunday, October 29, 2000 6:25 AM Subject: (ASCEND) Weird traffic stalls > >I emailed on this a couple of weeks ago - about my ascends acting hoky >round rush hour with stalled logins or Ip assignments that could pass >packets.. > >Ive noted that if I go into my router and clear the arp-cache - it clears >up - so someone must be doing something hokey but Im not sure where to >look - any ideas? > >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From everett at pgweb.com Sun Oct 29 22:01:44 2000 From: everett at pgweb.com (shawn everett) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] (ASCEND) MAX 4000 Telnet Access Message-ID: Is it possible to configure the MAX 4000 to limit telnet access into it to specific hosts? Much the same way you can use a hosts.allow/hosts.deny file on a UNIX system. Shawn ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From everett at pgweb.com Sun Oct 29 22:01:44 2000 From: everett at pgweb.com (shawn everett) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] (ASCEND) MAX 4000 Telnet Access Message-ID: Is it possible to configure the MAX 4000 to limit telnet access into it to specific hosts? Much the same way you can use a hosts.allow/hosts.deny file on a UNIX system. Shawn ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From niederhuefner at prolink.de Mon Oct 30 05:50:27 2000 From: niederhuefner at prolink.de (Ralf Niederhuefner) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] RE: (ASCEND) Weird traffic stalls In-Reply-To: <200010300645.WAA06095@max.bungi.com> Message-ID: <000401c04267$99408120$f7a6cbc1@VOYAGER> > I emailed on this a couple of weeks ago - about my ascends acting hoky > round rush hour with stalled logins or Ip assignments that could pass > packets.. > > Ive noted that if I go into my router and clear the arp-cache - it clears > up - so someone must be doing something hokey but Im not sure where to > look - any ideas? Hm, this reminds me of a case where dialin-user had assigned himself the IP-adress of our DNS. I do not remember the exact solution, but check for "Proxy Mode = off" if you don't need it for other purposes. Regards, Ralf ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From shovey at buffnet.net Mon Oct 30 06:25:29 2000 From: shovey at buffnet.net (Stephen Hovey) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] RE: (ASCEND) Weird traffic stalls In-Reply-To: <000401c04267$99408120$f7a6cbc1@VOYAGER> Message-ID: > > look - any ideas? > > Hm, this reminds me of a case where dialin-user had assigned himself the > IP-adress of our DNS. I do not remember the exact solution, but check for > "Proxy Mode = off" if you don't need it for other purposes. Thought of that - but I dont do routes, I use proxy because I have 4048's etc that dont need to hog a whole class C. I supposed I could subnet different.. (suppose I might have to) and do hard coded routes... ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From niederhuefner at prolink.de Mon Oct 30 05:50:27 2000 From: niederhuefner at prolink.de (Ralf Niederhuefner) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] RE: (ASCEND) Weird traffic stalls In-Reply-To: <200010300645.WAA06095@max.bungi.com> Message-ID: <000401c04267$99408120$f7a6cbc1@VOYAGER> > I emailed on this a couple of weeks ago - about my ascends acting hoky > round rush hour with stalled logins or Ip assignments that could pass > packets.. > > Ive noted that if I go into my router and clear the arp-cache - it clears > up - so someone must be doing something hokey but Im not sure where to > look - any ideas? Hm, this reminds me of a case where dialin-user had assigned himself the IP-adress of our DNS. I do not remember the exact solution, but check for "Proxy Mode = off" if you don't need it for other purposes. Regards, Ralf ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From shovey at buffnet.net Mon Oct 30 06:25:29 2000 From: shovey at buffnet.net (Stephen Hovey) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] RE: (ASCEND) Weird traffic stalls In-Reply-To: <000401c04267$99408120$f7a6cbc1@VOYAGER> Message-ID: > > look - any ideas? > > Hm, this reminds me of a case where dialin-user had assigned himself the > IP-adress of our DNS. I do not remember the exact solution, but check for > "Proxy Mode = off" if you don't need it for other purposes. Thought of that - but I dont do routes, I use proxy because I have 4048's etc that dont need to hog a whole class C. I supposed I could subnet different.. (suppose I might have to) and do hard coded routes... ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From psc5 at powersupply.net Mon Oct 30 08:18:44 2000 From: psc5 at powersupply.net (PowerNet) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] (ASCEND) Weird traffic stalls References: <000401c04267$99408120$f7a6cbc1@VOYAGER> Message-ID: <200010300918440138.61CD0410@mail.powersupply.net> We are seeing similar problems. You can be surfing, and all of a sudden searching for a web page just hangs for a minute or so, and then back to browsing. What does the Proxy mode actually do? Active vs Off? Thanks >> I emailed on this a couple of weeks ago - about my ascends acting hoky >> round rush hour with stalled logins or Ip assignments that could pass >> packets.. >> >> Ive noted that if I go into my router and clear the arp-cache - it clears >> up - so someone must be doing something hokey but Im not sure where to >> look - any ideas? > >Hm, this reminds me of a case where dialin-user had assigned himself the >IP-adress of our DNS. I do not remember the exact solution, but check for >"Proxy Mode = off" if you don't need it for other purposes. > >Regards, Ralf >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >To get FAQ'd: *********** END FORWARDED MESSAGE *********** ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From psc5 at powersupply.net Mon Oct 30 08:18:44 2000 From: psc5 at powersupply.net (PowerNet) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] (ASCEND) Weird traffic stalls References: <000401c04267$99408120$f7a6cbc1@VOYAGER> Message-ID: <200010300918440138.61CD0410@mail.powersupply.net> We are seeing similar problems. You can be surfing, and all of a sudden searching for a web page just hangs for a minute or so, and then back to browsing. What does the Proxy mode actually do? Active vs Off? Thanks >> I emailed on this a couple of weeks ago - about my ascends acting hoky >> round rush hour with stalled logins or Ip assignments that could pass >> packets.. >> >> Ive noted that if I go into my router and clear the arp-cache - it clears >> up - so someone must be doing something hokey but Im not sure where to >> look - any ideas? > >Hm, this reminds me of a case where dialin-user had assigned himself the >IP-adress of our DNS. I do not remember the exact solution, but check for >"Proxy Mode = off" if you don't need it for other purposes. > >Regards, Ralf >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >To get FAQ'd: *********** END FORWARDED MESSAGE *********** ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From shovey at buffnet.net Mon Oct 30 06:21:18 2000 From: shovey at buffnet.net (Stephen Hovey) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] Re: (ASCEND) Weird traffic stalls In-Reply-To: <001a01c0421e$660f3a60$dbf8c23f@machine> Message-ID: huh? That went way over my head. On Sun, 29 Oct 2000, Steve B. - Seeker wrote: > If no one else gets thrown into a mexican jail > > > -----Original Message----- > From: Stephen Hovey > To: ascend-users@bungi.com > Date: Sunday, October 29, 2000 6:25 AM > Subject: (ASCEND) Weird traffic stalls > > > > > >I emailed on this a couple of weeks ago - about my ascends acting hoky > >round rush hour with stalled logins or Ip assignments that could pass > >packets.. > > > >Ive noted that if I go into my router and clear the arp-cache - it clears > >up - so someone must be doing something hokey but Im not sure where to > >look - any ideas? > > > >++ Ascend Users Mailing List ++ > >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > >To get FAQ'd: > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From shovey at buffnet.net Mon Oct 30 06:21:18 2000 From: shovey at buffnet.net (Stephen Hovey) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] Re: (ASCEND) Weird traffic stalls In-Reply-To: <001a01c0421e$660f3a60$dbf8c23f@machine> Message-ID: huh? That went way over my head. On Sun, 29 Oct 2000, Steve B. - Seeker wrote: > If no one else gets thrown into a mexican jail > > > -----Original Message----- > From: Stephen Hovey > To: ascend-users@bungi.com > Date: Sunday, October 29, 2000 6:25 AM > Subject: (ASCEND) Weird traffic stalls > > > > > >I emailed on this a couple of weeks ago - about my ascends acting hoky > >round rush hour with stalled logins or Ip assignments that could pass > >packets.. > > > >Ive noted that if I go into my router and clear the arp-cache - it clears > >up - so someone must be doing something hokey but Im not sure where to > >look - any ideas? > > > >++ Ascend Users Mailing List ++ > >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > >To get FAQ'd: > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From hacko at mms.de Mon Oct 30 09:17:24 2000 From: hacko at mms.de (Hartmut Schroeder) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] Re: (ASCEND) Weird traffic stalls In-Reply-To: <200010300918440138.61CD0410@mail.powersupply.net> Message-ID: Date sent: Mon, 30 Oct 2000 09:18:44 -0500 Send reply to: psc5@powersupply.net From: "PowerNet" To: ascend-users@max.bungi.com Subject: (ASCEND) Weird traffic stalls > We are seeing similar problems. > You can be surfing, and all of a sudden searching for a web page just hangs for a minute or so, and then back to browsing. > > What does the Proxy mode actually do? > Active vs Off? > It's depending how you are giving your (pool)addresses to clients. Supose your gateway has 192.168.1.1 and you own a class-c-net (/24), your RAS-Server has 192.168.1.2 and your pool ranges form 192.168.1.10-192.168.1.42 (so IN the range of the gateways default net). If now a client logs in he will get an from the pool (like 192.168.1.23/32). All packets from the client (to internet) will go to your RAS-server and (due his default server to the gateway) If packets come from the Internet they first reach your gateway. Due to the netmask the gateway will send out an ARP-request the get the hardwareaddress of 192.168.1.23. If you have Proxy=active the RAS server will see this and answer with HIS hardware address so that he get's the packet and forward it to the client because the client isn't really in the local LAN. If you don't want to use this your gateway needs an extra route that points all pooladdresses to the RAS-Server (as you have to do if the pooladdresses are outside the LAN) Hope this makes it clear.... Regards H.Schroeder Hartmut Schroeder MMS Communication AG mailto:hacko@mms.de Eiffestrasse 598 http://www.mms.de/~hacko 20537 Hamburg, Germany Phone: +49 40 211105-40 Fax: +49 40 210 32 210 UTM 32U0569835 5934083 WGS84 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From hacko at mms.de Mon Oct 30 09:17:24 2000 From: hacko at mms.de (Hartmut Schroeder) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] Re: (ASCEND) Weird traffic stalls In-Reply-To: <200010300918440138.61CD0410@mail.powersupply.net> Message-ID: Date sent: Mon, 30 Oct 2000 09:18:44 -0500 Send reply to: psc5@powersupply.net From: "PowerNet" To: ascend-users@max.bungi.com Subject: (ASCEND) Weird traffic stalls > We are seeing similar problems. > You can be surfing, and all of a sudden searching for a web page just hangs for a minute or so, and then back to browsing. > > What does the Proxy mode actually do? > Active vs Off? > It's depending how you are giving your (pool)addresses to clients. Supose your gateway has 192.168.1.1 and you own a class-c-net (/24), your RAS-Server has 192.168.1.2 and your pool ranges form 192.168.1.10-192.168.1.42 (so IN the range of the gateways default net). If now a client logs in he will get an from the pool (like 192.168.1.23/32). All packets from the client (to internet) will go to your RAS-server and (due his default server to the gateway) If packets come from the Internet they first reach your gateway. Due to the netmask the gateway will send out an ARP-request the get the hardwareaddress of 192.168.1.23. If you have Proxy=active the RAS server will see this and answer with HIS hardware address so that he get's the packet and forward it to the client because the client isn't really in the local LAN. If you don't want to use this your gateway needs an extra route that points all pooladdresses to the RAS-Server (as you have to do if the pooladdresses are outside the LAN) Hope this makes it clear.... Regards H.Schroeder Hartmut Schroeder MMS Communication AG mailto:hacko@mms.de Eiffestrasse 598 http://www.mms.de/~hacko 20537 Hamburg, Germany Phone: +49 40 211105-40 Fax: +49 40 210 32 210 UTM 32U0569835 5934083 WGS84 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From pautler at grasshopper.cit.buffalo.edu Mon Oct 30 10:16:40 2000 From: pautler at grasshopper.cit.buffalo.edu (Joe Pautler) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] Re: (ASCEND) tnt suspect modems In-Reply-To: ; from lukejj@hotmail.com on Fri, Oct 27, 2000 at 05:40:03AM +0000 References: Message-ID: <20001030111640.Q20671@grasshopper.cit.buffalo.edu> luke johnson wrote: (written on 10/27/00 at 05:40) ] ]We have a couple of TNT's which are producing the message below. Upon ]looking at the suspect modem list I found that it contained close to 200 ]modems!! we only have 480 installed... I'm aware that 3 failed auth ]attempts will put the modem on the suspect list, however, it seems a bit ]excessive. (there are no modems on the failed list). We are running ]version 7.2.3, and are considering updating to ver 8.0.3, as I believe the ]TNT will only put the modems on a suspect list if they fail 8 time instead ]of three. ] ]Does anyone have any ideas or suggestions as to why we may be seeing so many ]modems put onto the suspect list? What usage do you generally have on your TNT? How long has it been since you last cleared/checked the modems on the suspect list? Remember, once a modem gets put on the suspect list, it will not get tried again unless all other modems are already in use...and the only way it will ever get moved off of the suspect list is by having a successful call. If you have 200 modems sitting on your suspect list, but can still handle all of your traffic with your remaining 280 modems, the suspect modems will never be given a chance to redeem themselves. If you see an entire modem card listed on the suspect list, then there's a good chance that card is 'bad'. One gripe that I've always had is that I have never been able to 'manually' move a modem off of the suspect list, without resetting the entire modem card (slot -d, slot -r, etc). ___________________________________________________________________________ Joe Pautler, E.I.T. University at Buffalo CIT/OSS Network Engineering 224 Computing Center http://www.oss.buffalo.edu/~pautler (716) 645-3536 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From abuse at infoasis.com Mon Oct 30 10:52:49 2000 From: abuse at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] Re: (ASCEND) Weird traffic stalls In-Reply-To: <200010300645.WAA06095@max.bungi.com> References: <200010300645.WAA06095@max.bungi.com> Message-ID: >From: Stephen Hovey > >I emailed on this a couple of weeks ago - about my ascends acting hoky >round rush hour with stalled logins or Ip assignments that could pass >packets.. > >Ive noted that if I go into my router and clear the arp-cache - it clears >up - so someone must be doing something hokey but Im not sure where to >look - any ideas? Compare 'show arp' when things are working and when they're not. What's different? -- Peter Lalor Infoasis abuse@infoasis.com http://www.infoasis.com/ Infoasis's mail servers and network are located in California. You are hereby forbidden to send unsolicited commercial e-mail or unsolicited bulk mail of any kind to any address hosted on Infoasis's mail servers or network. (California BPC, Section 17438.45). ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From pautler at grasshopper.cit.buffalo.edu Mon Oct 30 10:16:40 2000 From: pautler at grasshopper.cit.buffalo.edu (Joe Pautler) Date: Tue Jan 18 13:59:36 2005 Subject: [Ascend] Re: (ASCEND) tnt suspect modems In-Reply-To: ; from lukejj@hotmail.com on Fri, Oct 27, 2000 at 05:40:03AM +0000 References: Message-ID: <20001030111640.Q20671@grasshopper.cit.buffalo.edu> luke johnson wrote: (written on 10/27/00 at 05:40) ] ]We have a couple of TNT's which are producing the message below. Upon ]looking at the suspect modem list I found that it contained close to 200 ]modems!! we only have 480 installed... I'm aware that 3 failed auth ]attempts will put the modem on the suspect list, however, it seems a bit ]excessive. (there are no modems on the failed list). We are running ]version 7.2.3, and are considering updating to ver 8.0.3, as I believe the ]TNT will only put the modems on a suspect list if they fail 8 time instead ]of three. ] ]Does anyone have any ideas or suggestions as to why we may be seeing so many ]modems put onto the suspect list? What usage do you generally have on your TNT? How long has it been since you last cleared/checked the modems on the suspect list? Remember, once a modem gets put on the suspect list, it will not get tried again unless all other modems are already in use...and the only way it will ever get moved off of the suspect list is by having a successful call. If you have 200 modems sitting on your suspect list, but can still handle all of your traffic with your remaining 280 modems, the suspect modems will never be given a chance to redeem themselves. If you see an entire modem card listed on the suspect list, then there's a good chance that card is 'bad'. One gripe that I've always had is that I have never been able to 'manually' move a modem off of the suspect list, without resetting the entire modem card (slot -d, slot -r, etc). ___________________________________________________________________________ Joe Pautler, E.I.T. University at Buffalo CIT/OSS Network Engineering 224 Computing Center http://www.oss.buffalo.edu/~pautler (716) 645-3536 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From abuse at infoasis.com Mon Oct 30 10:52:49 2000 From: abuse at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] Re: (ASCEND) Weird traffic stalls In-Reply-To: <200010300645.WAA06095@max.bungi.com> References: <200010300645.WAA06095@max.bungi.com> Message-ID: >From: Stephen Hovey > >I emailed on this a couple of weeks ago - about my ascends acting hoky >round rush hour with stalled logins or Ip assignments that could pass >packets.. > >Ive noted that if I go into my router and clear the arp-cache - it clears >up - so someone must be doing something hokey but Im not sure where to >look - any ideas? Compare 'show arp' when things are working and when they're not. What's different? -- Peter Lalor Infoasis abuse@infoasis.com http://www.infoasis.com/ Infoasis's mail servers and network are located in California. You are hereby forbidden to send unsolicited commercial e-mail or unsolicited bulk mail of any kind to any address hosted on Infoasis's mail servers or network. (California BPC, Section 17438.45). ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From psc5 at powersupply.net Mon Oct 30 11:37:07 2000 From: psc5 at powersupply.net (PowerNet) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] Re: (ASCEND) Weird traffic stalls In-Reply-To: References: <200010300645.WAA06095@max.bungi.com> Message-ID: <200010301237070560.6282DFB8@mail.powersupply.net> What does 'show arp' do? *********** REPLY SEPARATOR *********** On 10/30/2000 at 8:52 AM Peter Lalor wrote: >>From: Stephen Hovey >> >>I emailed on this a couple of weeks ago - about my ascends acting hoky >>round rush hour with stalled logins or Ip assignments that could pass >>packets.. >> >>Ive noted that if I go into my router and clear the arp-cache - it clears >>up - so someone must be doing something hokey but Im not sure where to >>look - any ideas? > >Compare 'show arp' when things are working and when they're not. >What's different? >-- > >Peter Lalor Infoasis >abuse@infoasis.com http://www.infoasis.com/ > >Infoasis's mail servers and network are located in California. You >are hereby forbidden to send unsolicited commercial e-mail or >unsolicited bulk mail of any kind to any address hosted on Infoasis's >mail servers or network. (California BPC, Section 17438.45). >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From psc5 at powersupply.net Mon Oct 30 11:37:07 2000 From: psc5 at powersupply.net (PowerNet) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] Re: (ASCEND) Weird traffic stalls In-Reply-To: References: <200010300645.WAA06095@max.bungi.com> Message-ID: <200010301237070560.6282DFB8@mail.powersupply.net> What does 'show arp' do? *********** REPLY SEPARATOR *********** On 10/30/2000 at 8:52 AM Peter Lalor wrote: >>From: Stephen Hovey >> >>I emailed on this a couple of weeks ago - about my ascends acting hoky >>round rush hour with stalled logins or Ip assignments that could pass >>packets.. >> >>Ive noted that if I go into my router and clear the arp-cache - it clears >>up - so someone must be doing something hokey but Im not sure where to >>look - any ideas? > >Compare 'show arp' when things are working and when they're not. >What's different? >-- > >Peter Lalor Infoasis >abuse@infoasis.com http://www.infoasis.com/ > >Infoasis's mail servers and network are located in California. You >are hereby forbidden to send unsolicited commercial e-mail or >unsolicited bulk mail of any kind to any address hosted on Infoasis's >mail servers or network. (California BPC, Section 17438.45). >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From psc5 at powersupply.net Mon Oct 30 14:22:32 2000 From: psc5 at powersupply.net (PowerNet) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] Re: (ASCEND) Weird traffic stalls In-Reply-To: <200010301237070560.6282DFB8@mail.powersupply.net> References: <200010300645.WAA06095@max.bungi.com> <200010301237070560.6282DFB8@mail.powersupply.net> Message-ID: <200010301522320141.631A4F9D@mail.powersupply.net> Doing a sh arp command I see the addresses of my other term servers and my gateway routers IP address. I occasionally see ip's of dial-ups with a Refcount of 1 but I also see an IP address of a dial-up IP that has been there for a while and has a Refcount of 992 and seems to be increasing. Why would this be happening? John *********** REPLY SEPARATOR *********** On 10/30/2000 at 12:37 PM PowerNet wrote: >What does 'show arp' do? > >*********** REPLY SEPARATOR *********** > >On 10/30/2000 at 8:52 AM Peter Lalor wrote: > >>>From: Stephen Hovey >>> >>>I emailed on this a couple of weeks ago - about my ascends acting hoky >>>round rush hour with stalled logins or Ip assignments that could pass >>>packets.. >>> >>>Ive noted that if I go into my router and clear the arp-cache - it clears >>>up - so someone must be doing something hokey but Im not sure where to >>>look - any ideas? >> >>Compare 'show arp' when things are working and when they're not. >>What's different? >>-- >> >>Peter Lalor Infoasis >>abuse@infoasis.com http://www.infoasis.com/ >> >>Infoasis's mail servers and network are located in California. You >>are hereby forbidden to send unsolicited commercial e-mail or >>unsolicited bulk mail of any kind to any address hosted on Infoasis's >>mail servers or network. (California BPC, Section 17438.45). >>++ Ascend Users Mailing List ++ >>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >>To get FAQ'd: > > > >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From psc5 at powersupply.net Mon Oct 30 14:22:32 2000 From: psc5 at powersupply.net (PowerNet) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] Re: (ASCEND) Weird traffic stalls In-Reply-To: <200010301237070560.6282DFB8@mail.powersupply.net> References: <200010300645.WAA06095@max.bungi.com> <200010301237070560.6282DFB8@mail.powersupply.net> Message-ID: <200010301522320141.631A4F9D@mail.powersupply.net> Doing a sh arp command I see the addresses of my other term servers and my gateway routers IP address. I occasionally see ip's of dial-ups with a Refcount of 1 but I also see an IP address of a dial-up IP that has been there for a while and has a Refcount of 992 and seems to be increasing. Why would this be happening? John *********** REPLY SEPARATOR *********** On 10/30/2000 at 12:37 PM PowerNet wrote: >What does 'show arp' do? > >*********** REPLY SEPARATOR *********** > >On 10/30/2000 at 8:52 AM Peter Lalor wrote: > >>>From: Stephen Hovey >>> >>>I emailed on this a couple of weeks ago - about my ascends acting hoky >>>round rush hour with stalled logins or Ip assignments that could pass >>>packets.. >>> >>>Ive noted that if I go into my router and clear the arp-cache - it clears >>>up - so someone must be doing something hokey but Im not sure where to >>>look - any ideas? >> >>Compare 'show arp' when things are working and when they're not. >>What's different? >>-- >> >>Peter Lalor Infoasis >>abuse@infoasis.com http://www.infoasis.com/ >> >>Infoasis's mail servers and network are located in California. You >>are hereby forbidden to send unsolicited commercial e-mail or >>unsolicited bulk mail of any kind to any address hosted on Infoasis's >>mail servers or network. (California BPC, Section 17438.45). >>++ Ascend Users Mailing List ++ >>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >>To get FAQ'd: > > > >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tlongley at texinet.net Mon Oct 30 23:10:54 2000 From: tlongley at texinet.net (Tracy Longley) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] (ASCEND) es error events in fdl stats Message-ID: <009301c042f8$f29be700$876320d0@tex-235.texinet.net> I am getting error events in the es field in my fdl stats window. Is this normal or is there a problem with my t1's. Thanks, Tracy Longley ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From tlongley at texinet.net Mon Oct 30 23:10:54 2000 From: tlongley at texinet.net (Tracy Longley) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] (ASCEND) es error events in fdl stats Message-ID: <009301c042f8$f29be700$876320d0@tex-235.texinet.net> I am getting error events in the es field in my fdl stats window. Is this normal or is there a problem with my t1's. Thanks, Tracy Longley ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Tue Oct 31 11:32:30 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] Re: (ASCEND) Weird traffic stalls In-Reply-To: <200010310645.WAA11429@max.bungi.com> References: <200010310645.WAA11429@max.bungi.com> Message-ID: >From: "PowerNet" > >Doing a sh arp command I see the addresses of my other term servers >and my gateway routers IP address. You should see the addresses of the devices on the local Ethernet of your Max. If you're doing any form of Proxy ARP, you will also see dialed-in users. >I occasionally see ip's of dial-ups with a Refcount of 1 >but >I also see an IP address of a dial-up IP that has been there for a >while and has a Refcount of 992 and seems to be increasing. The refcount shows how many times another device has asked for that devices address (to send it data). >*********** REPLY SEPARATOR *********** > >On 10/30/2000 at 12:37 PM PowerNet wrote: > >>What does 'show arp' do? >> >>*********** REPLY SEPARATOR *********** >> >>On 10/30/2000 at 8:52 AM Peter Lalor wrote: >> >>>>From: Stephen Hovey >>>> >>>>I emailed on this a couple of weeks ago - about my ascends acting hoky > >>>round rush hour with stalled logins or Ip assignments that could pass >>>>packets.. >>>> >>>>Ive noted that if I go into my router and clear the arp-cache - it clears >>>>up - so someone must be doing something hokey but Im not sure where to >>>>look - any ideas? >>> >>>Compare 'show arp' when things are working and when they're not. >>>What's different? >>>-- >>> > >>Peter Lalor Infoasis -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From plalor at infoasis.com Tue Oct 31 11:32:30 2000 From: plalor at infoasis.com (Peter Lalor) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] Re: (ASCEND) Weird traffic stalls In-Reply-To: <200010310645.WAA11429@max.bungi.com> References: <200010310645.WAA11429@max.bungi.com> Message-ID: >From: "PowerNet" > >Doing a sh arp command I see the addresses of my other term servers >and my gateway routers IP address. You should see the addresses of the devices on the local Ethernet of your Max. If you're doing any form of Proxy ARP, you will also see dialed-in users. >I occasionally see ip's of dial-ups with a Refcount of 1 >but >I also see an IP address of a dial-up IP that has been there for a >while and has a Refcount of 992 and seems to be increasing. The refcount shows how many times another device has asked for that devices address (to send it data). >*********** REPLY SEPARATOR *********** > >On 10/30/2000 at 12:37 PM PowerNet wrote: > >>What does 'show arp' do? >> >>*********** REPLY SEPARATOR *********** >> >>On 10/30/2000 at 8:52 AM Peter Lalor wrote: >> >>>>From: Stephen Hovey >>>> >>>>I emailed on this a couple of weeks ago - about my ascends acting hoky > >>>round rush hour with stalled logins or Ip assignments that could pass >>>>packets.. >>>> >>>>Ive noted that if I go into my router and clear the arp-cache - it clears >>>>up - so someone must be doing something hokey but Im not sure where to >>>>look - any ideas? >>> >>>Compare 'show arp' when things are working and when they're not. >>>What's different? >>>-- >>> > >>Peter Lalor Infoasis -- Peter Lalor Infoasis plalor@infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From netlink at netlinkcorp.com Tue Oct 31 12:52:34 2000 From: netlink at netlinkcorp.com (netlink@netlinkcorp.com) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] (ASCEND) Join Message-ID: <39FF14F2.1F74@netlinkcorp.com> Join ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From netlink at netlinkcorp.com Tue Oct 31 12:52:34 2000 From: netlink at netlinkcorp.com (netlink@netlinkcorp.com) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] (ASCEND) Join Message-ID: <39FF14F2.1F74@netlinkcorp.com> Join ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From inya at qualcomm.com Tue Oct 31 14:16:59 2000 From: inya at qualcomm.com (Prasanna Inamdar) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] (ASCEND) MAX6000 abnormal disconnects. Message-ID: Hi, I have a MAX6000 with 48 modems running TAOS 8.0.1 What I observe: 1) I dial into it and setup a PPP session using Win98 DUN. On the MAx I have set PPP Authentication to None. On the Win98 DUN I give username and password as blank. 2) Once I am assigned an IP address, I start a FTP session with a another arbitrary machine on the internet. 3) I see consistently that the MAX terminates the PPP session after 17500-18000 bytes (ftp doesn't give me much granularity than that) are transferred or the connection is up for 5minutes, whichever is *EARLIER* 4) I tried setting up PPP auth to PAP, setup a username/passwd in the Connections/Answer profile, gave the username/password in Win98 DUN..but same behavior. BTW, I have observed the same behavior when I dial into from a Linux box too, so I doubt it has got to do with remote user end. Thanks! Prasanna Inamdar Qualcomm, Inc. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From inya at qualcomm.com Tue Oct 31 14:16:59 2000 From: inya at qualcomm.com (Prasanna Inamdar) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] (ASCEND) MAX6000 abnormal disconnects. Message-ID: Hi, I have a MAX6000 with 48 modems running TAOS 8.0.1 What I observe: 1) I dial into it and setup a PPP session using Win98 DUN. On the MAx I have set PPP Authentication to None. On the Win98 DUN I give username and password as blank. 2) Once I am assigned an IP address, I start a FTP session with a another arbitrary machine on the internet. 3) I see consistently that the MAX terminates the PPP session after 17500-18000 bytes (ftp doesn't give me much granularity than that) are transferred or the connection is up for 5minutes, whichever is *EARLIER* 4) I tried setting up PPP auth to PAP, setup a username/passwd in the Connections/Answer profile, gave the username/password in Win98 DUN..but same behavior. BTW, I have observed the same behavior when I dial into from a Linux box too, so I doubt it has got to do with remote user end. Thanks! Prasanna Inamdar Qualcomm, Inc. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From sales at wrca.net Tue Oct 31 16:24:01 2000 From: sales at wrca.net (Steve Rivera -www.wrca.net) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] (ASCEND) How do you reset password in 4004? Message-ID: <4.2.0.58.20001031171515.02272610@mail.wrca.net> I have a unit here that wont reset the password. I have removed the battery for the extent of a weekend and still nothing. I have heard from others that there are procedures to do once you have removed the battery for a time. Can anyone lead me to a URL or have the procedure in a format they can transfer via email? I have the following available coming out of service: 2000 chassis w/ 3- MXSL-8MOD-s56 $2700 4002 chassis w/ 4- MXSL-8MOD-s56 $2950 4048 chassis w/ 3- MXSL-16MOD-s56 $4500 4004 chassis w/ ISDN/FR (New Condition) $1000 Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera@wrca.net - Mobile Email: srivera711@hotmail.com Worldwide Provider of Network Hardware Since 1981. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From sales at wrca.net Tue Oct 31 16:24:01 2000 From: sales at wrca.net (Steve Rivera -www.wrca.net) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] (ASCEND) How do you reset password in 4004? Message-ID: <4.2.0.58.20001031171515.02272610@mail.wrca.net> I have a unit here that wont reset the password. I have removed the battery for the extent of a weekend and still nothing. I have heard from others that there are procedures to do once you have removed the battery for a time. Can anyone lead me to a URL or have the procedure in a format they can transfer via email? I have the following available coming out of service: 2000 chassis w/ 3- MXSL-8MOD-s56 $2700 4002 chassis w/ 4- MXSL-8MOD-s56 $2950 4048 chassis w/ 3- MXSL-16MOD-s56 $4500 4004 chassis w/ ISDN/FR (New Condition) $1000 Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr (www.isp-networkhardware.com) Email: srivera@wrca.net - Mobile Email: srivera711@hotmail.com Worldwide Provider of Network Hardware Since 1981. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From gehres at datasync.com Tue Oct 31 13:58:39 2000 From: gehres at datasync.com (Mark A. Gehres) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] (ASCEND) FAQ Message-ID: <200010311958.NAA19447@shell.datasync.com> I tried going to the FAQs listed but was unable to open a page at that address. Anyone know where these FAQs were moved to? To get FAQ'd: -- Mark Gehres <>< Datasync www.datasync.com Phone: (228) 432-5168 x-119 Fax: (228) 435-4388 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From s-t-e-v-e at t-online.de Tue Oct 31 17:27:14 2000 From: s-t-e-v-e at t-online.de (Steve Meier) Date: Tue Jan 18 13:59:37 2005 Subject: [Ascend] Re: (ASCEND) How do you reset password in 4004? In-Reply-To: <4.2.0.58.20001031171515.02272610@mail.wrca.net> Message-ID: <5.0.0.25.2.20001101001756.00a52768@mail.gigabell.net> Hi Steve, i came across that problem myself quite a few times. There is a solution to it although that is pretty difficult: First you need to remove the cover of the MAX and locate the jumper called P6 (maybe it was P9, i don't exactly remember). That jumper should be located somewhere near the back end of the MAX. After you closed that jumper, boot up the MAX and connect a PC to the serial connector (56700,8,1,N if I remember right). You don't have to put the cover on while you do the next steps. Now the MAX should boot up in the so called NINDY MODE. That gives you the opportunity to clear the NVRAM and install a different software version (the older the TAOS is, the better). After you installed some old TAOS you reboot the MAX and install the newest TAOS or the version you want to use. Now your MAX should have the standard Full Access Password (Ascend) and you can re-configure it. With a little practice you should be able to do that within 30-60 minutes, so no big deal. If you have further question don't hesitate to contact me. Yours sincerely, Steve Meier At 17:24 31.10.2000 -0500, you wrote: >I have a unit here that wont reset the password. I have removed the >battery for the extent of a weekend and still nothing. I have heard from >others that there are procedures to do once you have removed the battery >for a time. Can anyone lead me to a URL or have the procedure in a format >they can transfer via email? > > I have the following available coming out of service: >2000 chassis w/ 3- MXSL-8MOD-s56 $2700 >4002 chassis w/ 4- MXSL-8MOD-s56 $2950 >4048 chassis w/ 3- MXSL-16MOD-s56 $4500 >4004 chassis w/ ISDN/FR (New Condition) $1000 > > >Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr >(www.isp-networkhardware.com) >Email: srivera@wrca.net - Mobile Email: srivera711@hotmail.com > >Worldwide Provider of Network Hardware Since 1981. > > > > > > > > > > > > >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From gehres at datasync.com Tue Oct 31 13:58:39 2000 From: gehres at datasync.com (Mark A. Gehres) Date: Tue Jan 18 13:59:38 2005 Subject: [Ascend] (ASCEND) FAQ Message-ID: <200010311958.NAA19447@shell.datasync.com> I tried going to the FAQs listed but was unable to open a page at that address. Anyone know where these FAQs were moved to? To get FAQ'd: -- Mark Gehres <>< Datasync www.datasync.com Phone: (228) 432-5168 x-119 Fax: (228) 435-4388 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From s-t-e-v-e at t-online.de Tue Oct 31 17:27:14 2000 From: s-t-e-v-e at t-online.de (Steve Meier) Date: Tue Jan 18 13:59:38 2005 Subject: [Ascend] Re: (ASCEND) How do you reset password in 4004? In-Reply-To: <4.2.0.58.20001031171515.02272610@mail.wrca.net> Message-ID: <5.0.0.25.2.20001101001756.00a52768@mail.gigabell.net> Hi Steve, i came across that problem myself quite a few times. There is a solution to it although that is pretty difficult: First you need to remove the cover of the MAX and locate the jumper called P6 (maybe it was P9, i don't exactly remember). That jumper should be located somewhere near the back end of the MAX. After you closed that jumper, boot up the MAX and connect a PC to the serial connector (56700,8,1,N if I remember right). You don't have to put the cover on while you do the next steps. Now the MAX should boot up in the so called NINDY MODE. That gives you the opportunity to clear the NVRAM and install a different software version (the older the TAOS is, the better). After you installed some old TAOS you reboot the MAX and install the newest TAOS or the version you want to use. Now your MAX should have the standard Full Access Password (Ascend) and you can re-configure it. With a little practice you should be able to do that within 30-60 minutes, so no big deal. If you have further question don't hesitate to contact me. Yours sincerely, Steve Meier At 17:24 31.10.2000 -0500, you wrote: >I have a unit here that wont reset the password. I have removed the >battery for the extent of a weekend and still nothing. I have heard from >others that there are procedures to do once you have removed the battery >for a time. Can anyone lead me to a URL or have the procedure in a format >they can transfer via email? > > I have the following available coming out of service: >2000 chassis w/ 3- MXSL-8MOD-s56 $2700 >4002 chassis w/ 4- MXSL-8MOD-s56 $2950 >4048 chassis w/ 3- MXSL-16MOD-s56 $4500 >4004 chassis w/ ISDN/FR (New Condition) $1000 > > >Steve Rivera (VP) - w-732.833.2111 x102 / c-732.433.5890 24Hr >(www.isp-networkhardware.com) >Email: srivera@wrca.net - Mobile Email: srivera711@hotmail.com > >Worldwide Provider of Network Hardware Since 1981. > > > > > > > > > > > > >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >To get FAQ'd: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From ascend at lewiscounty.com Tue Oct 31 15:53:44 2000 From: ascend at lewiscounty.com (Randy Smith) Date: Tue Jan 18 13:59:38 2005 Subject: [Ascend] (ASCEND) Long tone w/ analog connect on the last 16 ports of 6096 Message-ID: <20001031235421152.AAA204@mail.lewiscounty.com> Hi Everyone, I have a max 6096 that produces a long tone when attempting to connect when the box has more than 80 connections. I've checked that ring back is off. I also verified that all the channels are set properly. Any ideas? Randy Smith Tiger Mountain Technologies ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From ascend at lewiscounty.com Tue Oct 31 15:53:44 2000 From: ascend at lewiscounty.com (Randy Smith) Date: Tue Jan 18 13:59:38 2005 Subject: [Ascend] (ASCEND) Long tone w/ analog connect on the last 16 ports of 6096 Message-ID: <20001031235421152.AAA204@mail.lewiscounty.com> Hi Everyone, I have a max 6096 that produces a long tone when attempting to connect when the box has more than 80 connections. I've checked that ring back is off. I also verified that all the channels are set properly. Any ideas? Randy Smith Tiger Mountain Technologies ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jb at jbacher.com Tue Oct 31 19:22:45 2000 From: jb at jbacher.com (J Bacher) Date: Tue Jan 18 13:59:38 2005 Subject: [Ascend] Re: (ASCEND) Long tone w/ analog connect on the last 16 ports of 6096 In-Reply-To: <20001031235421152.AAA204@mail.lewiscounty.com> Message-ID: > I have a max 6096 that produces a long tone when attempting to connect when the box has more than 80 connections. I've checked that ring back is off. I also verified that all the channels are set properly. Any ideas? Have you checked to determine as to whether you have a bad modem or modem card? ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From ascend at lewiscounty.com Tue Oct 31 17:32:58 2000 From: ascend at lewiscounty.com (Randy Smith) Date: Tue Jan 18 13:59:38 2005 Subject: [Ascend] Re: Re: (ASCEND) Long tone w/ analog connect on the last 16 ports of 6096 Message-ID: <20001101013336235.AAA216@mail.lewiscounty.com> I thought a bad modem may be the cause. Is their anyway I can verify if ports/modem are alive or dead? Does the max maintain a dead list? Thanks, Randy Smith Tiger Mountain Technologoies ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From jb at jbacher.com Tue Oct 31 19:22:45 2000 From: jb at jbacher.com (J Bacher) Date: Tue Jan 18 13:59:38 2005 Subject: [Ascend] Re: (ASCEND) Long tone w/ analog connect on the last 16 ports of 6096 In-Reply-To: <20001031235421152.AAA204@mail.lewiscounty.com> Message-ID: > I have a max 6096 that produces a long tone when attempting to connect when the box has more than 80 connections. I've checked that ring back is off. I also verified that all the channels are set properly. Any ideas? Have you checked to determine as to whether you have a bad modem or modem card? ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From ascend at lewiscounty.com Tue Oct 31 17:32:58 2000 From: ascend at lewiscounty.com (Randy Smith) Date: Tue Jan 18 13:59:38 2005 Subject: [Ascend] Re: Re: (ASCEND) Long tone w/ analog connect on the last 16 ports of 6096 Message-ID: <20001101013336235.AAA216@mail.lewiscounty.com> I thought a bad modem may be the cause. Is their anyway I can verify if ports/modem are alive or dead? Does the max maintain a dead list? Thanks, Randy Smith Tiger Mountain Technologoies ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From ascend at lewiscounty.com Tue Oct 31 18:16:03 2000 From: ascend at lewiscounty.com (Randy Smith) Date: Tue Jan 18 13:59:38 2005 Subject: [Ascend] Re: RE: (ASCEND) Long tone w/ analog connect on the last 16 ports of 6096 Message-ID: <20001101021641763.AAA144@mail.lewiscounty.com> Nothing special. Stacking but no other services. I have posted a few graphs from mrtg that display the problem. It appears to have worked back in May but has been a problem since mid-Sept. Oddly, in Aug the unit had locked up with alarm but after we reseated the modem cards the unit began working again. I suspect a modem card. http://www.lewiscounty.com/maxproblem.htm Thanks in advance, Randy Smith Tiger Mountain Technologies ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: From ascend at lewiscounty.com Tue Oct 31 18:16:03 2000 From: ascend at lewiscounty.com (Randy Smith) Date: Tue Jan 18 13:59:38 2005 Subject: [Ascend] Re: RE: (ASCEND) Long tone w/ analog connect on the last 16 ports of 6096 Message-ID: <20001101021641763.AAA144@mail.lewiscounty.com> Nothing special. Stacking but no other services. I have posted a few graphs from mrtg that display the problem. It appears to have worked back in May but has been a problem since mid-Sept. Oddly, in Aug the unit had locked up with alarm but after we reseated the modem cards the unit began working again. I suspect a modem card. http://www.lewiscounty.com/maxproblem.htm Thanks in advance, Randy Smith Tiger Mountain Technologies ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: