The CLID is available on PRI services, as supplied by your carrier. This is available in the ISDN Q.931 Call Setup message sent from the ISDN network. In the MAX this is seen (undecoded, in hex) in the pridisplay diagnostic command. Greg > -----Original Message----- > From: Roddy Strachan [mailto:roddy at satlink.com.au] > Sent: Tuesday, April 10, 2001 11:32 AM > To: Ascend > Subject: (ASCEND) CLI on Max > > > Hi, > > With the Max 6k and 3k series, is Calling Line ID enabled as a default > option on these boxes (providing of course it is enabled by > the Telco) or is > there something I need to enable? > > > --- > Cheers, > > R. Strachan > Satlink Internet Services Pty Ltd. > Ph. +61-3-9775-2600 > Fax. +61-3-9775-2456 > Email. roddy at satlink.com.au > rod_gers1873 at yahoo.com > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to > ascend-users-request at bungi.com > To get FAQ'd: <http://www.nealis.net/ascend/faq> > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com To get FAQ'd: <http://www.nealis.net/ascend/faq>