> -----Original Message----- > From: Eric Larsen [mailto:eric at istal.com] > Sent: 17 August 2001 11:55 > To: ascend-users at max.bungi.com > Subject: (ASCEND) packet loss on 100MB ethernet port - MAXTNT > > > I have a slot card with a 100MB ethernet port and 3 > unused10MB ports on my > TNT. I am getting a high amount of packet loss on the 100MB > port. I usually > have 120 to 150 v.90 dial up customers on the TNT. How do I > turn on logging > to determine the cause of the packet loss. This might be an obvious statement, but in my experience, 9 times out of 10 packet loss on Ethernet is down to a duplex mismatch between the host and the switch. Make sure you have the setting for duplex in Ethernet {1 x y} (where x and y are you slot number and port number) set to full-duplex, and check the switch port the TNT is plugged in to is also nailed to full-duplex. Cheers Martin +----------------- Martin Saunders Products Manager Easynet Ltd. 'Best European ISP' by ISPA 2001 http://about.easynet.net martin.saunders at uk.easynet.net Tel:(+44) (0)20 7900 4444 -----------------+ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/