Hello, are you using a leased line or a dialup line ? I once had an increase in CRC errors on a leased line that resulted in a faulty part somewhere along the way at the Telekom carrier. Let your carrier check the connection. It may also be an indicator of faulty or too long cables in one of your offices. Check it out. HiH Burkhard Weeber viastore systems GmbH P/O Box 300668 D-70446 Stuttgart Tel: +49-711-9818-0 Email: B.Weeber at viastore.de Windows95: <win-doz-nin-te-fiv> n. 32 bit extensions and a graphical shell for a 16 bit patch to an 8 bit operating system originally coded for a 4 bit microprocessor, written by a 2 bit company, that can't stand 1 bit of competition. > -----Original Message----- > From: owner-ascend-users at max.bungi.com > [mailto:owner-ascend-users at max.bungi.com]On Behalf Of Mark L. Pieratt > Sent: Tuesday, December 11, 2001 7:00 PM > To: ascend-users at max.bungi.com > Subject: (ASCEND) Pipeline 50, desperate, need help. > > > Hi all, > > Anyone out there familiar with any problems which exist with > Pipeline 50 > units which cause them to just start generating large amounts of CRC > errors, then losing connection (ISDN)? I'm using these units > creating a > WAN between two offices. > > I've looked at everything! > > I've ordered several line quality tests on the ISDN lines, > all the way to > my equipment. Should I trust the ISDN vendor (ma bell)?, I'm > assuming I > do. I've looked at network traffic, nothing on either side > is causing > CRC's, as I've isolated all hosts off each LAN. I've looked at ALL > configuration settings, and tried ALL different scenarios of > bridging, and > routing. Almost always, when I reset both units (cycle power for > 20sec's+), they connect up fine for x-amount of time (varying between > 15min's and two weeks of error free uptime). Much more to > tell, I'll spare > the details, I've spent a lot of time trying to solve this problem - > > Anyone with similar experiences, advice, clues??? > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to > ascend-users-request at bungi.com > Archives: http://www.nexial.com/mailinglists/ > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/