We're using Pipe75 routers are remote locations dialing back to a MAX 4002. The calls are initiated by the MAX calling the P75, sending CHAP password, P75 hangs up and dials back the number for the MAX. Authentication is complete and the line stays up for the session, with a 20 minute timeout. There's currently 4 remote sites, two international, two domestic US. This happens on all of them (even traced it to happening when the MAX called a prototype system in our lab) The tricky part is that it once one call gets caught in this "hang," other calls go just fine. If there's no sessions, I start one to site A. It hangs. Site B C and D goes up fine. If I start with B, then A C & D go fine. It's whichever one is first. Our logs go back 8 months, and on the day we turned syslog on, it happened. Happens more now as there's 4 times as many sessions. It's kind of an irritating little bugger. Paul ----- Original Message ----- From: "CSI Ascend List" <Ascend at CottonStates.com> To: "'Paul Bryson'" <isdn at technocore.org>; "Ascend List" <rte-ascend at lists.real-time.com> Sent: Thursday, February 08, 2001 7:59 AM Subject: RE: [Ascend] MAX4002 hanging on call > I just spent the whole weekend troubleshooting a the same error code, (c=100 > p=65) in my case it ended up being an incorrect password being passed from > steel-belted to the TNT dialing out. Maybe you could tell us more about > your setup? > > Carlos Morillo > Network Administrator > Cotton States Insurance > Atlanta, GA > > -----Original Message----- > From: Paul Bryson [mailto:isdn at technocore.org] > Sent: Tuesday, February 06, 2001 7:06 PM > To: Ascend List > Subject: [Ascend] MAX4002 hanging on call > > > Hi, I've got a Max4002 box that's acting kinda funny. It sometimes seems to > make a connection, but IP traffic can't flow over the pipe. I checked the > logs and this is a summary of what I see: > > Feb 6 14:30:28 csnmax1.kla-tencor.com ASCEND: slot 9 port 2, Outgoing Call, > 90118866******* [MBID 208] > Feb 6 14:30:33 csnmax1.kla-tencor.com ASCEND: slot 9 port 2, line 1, > channel 2, Call Connected, MBID 208 [MBID 208] > Feb 6 14:30:33 csnmax1.kla-tencor.com ASCEND: call 72 OR slot 9 port 2 64K > 90118866******* > Feb 6 14:32:05 csnmax1.kla-tencor.com ASCEND: slot 9 port 2, Call > Terminated [MBID 208] > Feb 6 14:32:05 csnmax1.kla-tencor.com ASCEND: call 72 CL 0K c=100 p=65 > s=64000 r=64000 > > While a call is stuck in this timeout, all other calls seem to go up just > fine. It seems to always be on slot 9 port 2. We've thought about > disabling this port somehow, but haven't found the way. > > Anyone seen this before? > > Thanks a bunch! > > Paul Bryson > iSupport Network > KLA-Tencor Corp > > > ** I pulled the last seven digits of the number out for security reasons. > > > _______________________________________________ > rte-ascend mailing list > rte-ascend at lists.real-time.com > https://mailman.real-time.com/mailman/listinfo/rte-ascend > _______________________________________________ > rte-ascend mailing list > rte-ascend at lists.real-time.com > https://mailman.real-time.com/mailman/listinfo/rte-ascend >