>From: "Troy Settle" <troy at psknet.com> > >I got my TNT up and running with very little fuss and I'm happily accepting >dialup and ISDN connections. It's a great box; you'll love it. >However, I've not had any luck at all getting a PtP T1 up and running (I >gotta get it moved from my Max 6k). I configured the T1 port and the >physical layer comes up without a problem, but I can't get layer 2 up at >all. Here's the relevant portions of my attempted config: > >[in CONNECTION/nrk] >station* = nrk >active = yes >encapsulation-protocol = ppp >... > >[in CONNECTION/nrk:ip-options] >ip-routing-enabled = yes >vj-header-prediction = yes >remote-address = 192.168.20.97/28 >local-address = 0.0.0.0/0 >... > >[in CONNECTION/nrk:telco-options] >answer-originate = ans-and-orig >callback = no >call-type = ft1 >nailed-groups = 8 >ft1-caller = yes >force-56kbps = no >data-service = 64k-clear >... > >[in CONNECTION/nrk:ppp-options] >send-auth-mode = no-ppp-auth >bi-directional-auth = none >send-password = "" >substitute-send-name = "" >recv-password = "" >substitute-recv-name = "" > > >I've tried changing most of these paramaters around, but have absolutely no >luck at all with it. I really need to get this T1 off the 6096, and would >really appreciate some help with it. Everything you've shown is correct, assuming the nailed T1 is assigned nailed-group 8. As you've got this working with a 6000, you just need to make sure that every setting in the 6000 is recreated in the TNT. Particularly, pay attention to your compression settings (Stac, vj-header-prediction.) A mismatch there will cause problems. One easy thing to do is save out both configs and compare the T1 and connection profiles. What does the log show for the profile? It should give progress codes that can help. Do you have enough HDLC resources? 'hdlc -a'. You'll need as many as you have nailed T1 channels, plus enough for each active ISDN B channel. I've moved nailed T1s back and forth between Max 20s and a TNT without difficulty several times. It does work. -- Peter Lalor Infoasis plalor at infoasis.com http://www.infoasis.com/ "Where's my burrito?" -- Homer ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com To get FAQ'd: <http://www.nealis.net/ascend/faq>