Hello Emad Anis, Do you want the negotiated data rates for the modems, or the current utilization passing through the modem? Im not sure about individual capabilites of NA5.0, but There will probably be interface counters for each WAN interface in the SNMP mibs, which can be correlated to individual sessions (just a guess though). Your Lucent Reseller may be able to help you with that sort of information. Addiditonally, the AccessPoint router does traffic shaping and can provide real time graphs of data going through it, on a per IP address or IP address Range basis. (very pretty, may not be what you're after though). If you just want the negotiated rates on the modem connections, the default userstat command on the tnt will show this for current users. NavisAccess May be able to create a negotiation rate over time graph with its call logging. Greg -----Original Message----- From: Emad Anis [mailto:emad.anis at link.net] Sent: Wednesday, July 18, 2001 7:14 PM To: ascend-users at max.bungi.com Subject: (ASCEND) modem utilization Hi All I'm asking about if it's applicable to use the Navis Access to measure the bandwidth utilization for each modem in Max TNT ? or can we read that by anyway ? . thx in advance Emad Anis DataCommunication Engineer LINKdotNET E-mail: emad.anis at link.net Web: www.link.net Tel.: +202 3367711 Fax: +202 3364910 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/