I am trying to do a PPP T1 to a customer site. Here is what I have that is not working. Looks like we have a WAN link but data moving across it. Side A (My Side) - Pipeline 220 Ethernet/Static Routes/Default Route - 202.210.200.1 (our gateway) Ethernet/Mod Config/Ether1/IP Addr - 202.210.200.186/24 Ethernet/Connections/Cust001/IP Options/LAN Adrs - 202.210.202.106/30 Side B (Cust001) - Pipeline 130 Ethernet/Static Routes/Default Route - 202.210.200.186 Ethernet/Mod Config/Ether/IP Addr - 202.210.202.106/30 Ethernet/Mod Config/Ether/2nd IP - 10.0.0.1 (for the internal side) Ethernet/Connections/ISP/IP Options/LAN Adrs - 202.210.200.186 The connection seems to come up fine for one minute or so and then drops. At no time can I actually route packets while it is up. On the Pipe 220, it shows L1/LA nnnn........ (4 DS0's active). On the 130 at the cust site, it show link active as well. Telco has run end-to-end tests and says the T is clear. Any ideas? Thanks, ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/