Hi Folks, I am trying to configure a PSAX600 using the console port but I am not getting any response at all from it. I have tried using both a crossover (null modem) cable and a straight through serial cable with no success. The manual gives settings of 32k/8/n/2 (I think it is 32k) which is quite different to most other boxes I have used (9600/n/8/1). It doesnt work with 9600/8/n/1 or 19.2k/8/n/1 either. Any suggestions would be appreciated. Thanks in advance. Brian Morris ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com To get FAQ'd: <http://www.nealis.net/ascend/faq>