Modem Ringback Description: By default, when the MAX answers an analog modem call, it generates a ringback tone that the calling modem hears, and then begins the modem protocol. Most modems ignore the ringback tone. However, some older modems require the MAX to generate a ringback tone. Usage: Specify one of the following values: Yes specifies that the MAX generates a ringback tone. This is the default. No specifies that the MAX does not generate a ringback tone. Location: Ethernet > Mod Config At 09:37 AM 5/10/01 , Scot W. Hetzel wrote: >From: "Mike Talbert" <talbs at pcsonline.com> > > I just picked up this MAX 6000, I have several 4000's, I notice when the > > 6000 answers modem calls it sends a 2-3 second busy like tone before the > > handshaking starts, my 4000's dont do this. Is this normal on the 6000? > > >Check to make sure you don't have 'Modem Ringback' enabled on the MAX 6000: > > Ethernet->Mod Config->Modem Ringback > >Scot > >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request at bungi.com >Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/