Hi Lennard, A Max that has ISDN Signaling enabled can still terminate T1 calls for PPP dial in users. You just have an option, it is not a requirement. If the MAX was previously running PRI's and you are going to switch to T1's, make sure that you map each DS0 (channel) on the T1 to a modem slot in addition to the other config changes you make on the lines. David Pascarella, CCNA MCSE LSCP A+ Network Support Engineer SOLUServe TAC 1571 Robert J. Conlan Blvd., Suite 110 Palm Bay, FL 32905-3562 888.449.5766 800.795.2814 fax: 321.308.7986 mailto:dpascarella at solunet.com www.solunet.com -----Original Message----- From: Lennard Kong [mailto:lennard at ns1.carib-link.net] Sent: Wednesday, November 21, 2001 11:12 AM To: ascend-users at max.bungi.com Subject: (ASCEND) Max with ISDN to use with Channelized T1 Hello, I have a Max with ISDN/Frame options, Can this max still be used with Channelized T1 for regular dialup as a terminal server ? If not, what can be done ? Thanks, Lennard Kong ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/