Hardware on our end: Max4048: 6.1.6e23 Hardware on remote end: Pipeline 75 Radius Configuration: username Authentication-Type = Unix-PW Service-Type = Framed, Framed-Protocol = MPP, Framed-IP-Address = 67.36.253.133, Framed-Route = "67.36.253.168/29 67.36.253.133", Framed-IP-Netmask = 255.255.255.255, Ascend:Ascend-Idle-Limit = 0, Ascend:Ascend-Maximum-Channels = 2 Verified that this username/password are valid in RADIUS by diaing in with a windows XP box using dial-up networking. Had user type in username and password over and over, still getting this error in syslog. Apr 1 11:53:46 host ASCEND: slot 9 port 2, LAN security error, smithcon [MBID 389; 740568 3000->3730099] Apr 1 11:53:46 host ASCEND: call 128 CL 0K u=smithcon c=101 p=67 s=64000 r=64000 h=67.3 6.253.133 Tried added a 2 and manually setting the password in radius via the Password = "" directive. Radius is saying: Apr 1 04:12:02 rad2 radiusd[203]: Received-Authentication: 34/61754 'smithcon' from 67.36.252.2 port 10112 $"383700829" PPP In radius accounting we see: Mon Apr 1 04:19:33 2002 NAS-IP-Address = 67.36.252.2 NAS-Port = 10101 NAS-Port-Type = Sync Acct-Status-Type = Stop Acct-Delay-Time = 49 Acct-Session-Id = "383700878" Ascend-Disconnect-Cause = Invalid-Incoming-User Ascend-Connect-Progress = IPNCP-Opened Ascend-Data-Rate = 64000 Ascend-PreSession-Time = 4 Ascend-Pre-Input-Octets = 284 Ascend-Pre-Output-Octets = 273 Ascend-Pre-Input-Packets = 10 Ascend-Pre-Output-Packets = 14 Ascend-Multilink-ID = 385 Ascend-Num-In-Multilink = 0 Calling-Station-Id = "7405683000" Called-Station-Id = "3730099" Anyone have ANY IDEA what is going on? This is driving us quite insane! -Drew ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/