Max 2000: With all cables and power removed remove all cards from the box, open the case and orient the LEDs toward you (the front). Locate P10 and short it (jumper, screwdriver, piece of foil...Whatever). It is located in the front right corner of the motherboard next to a ribbon cable. Attach the serial and power cables. Power up, the terminal program should be set at 57600 N-8-1 no flow control. you should get a ">" prompt, you are now in NINDY mode. From there you can do as you will. Entering a "?" will give you some of the basic commands possible. To get out of NINDY just remove the jumper and power-cycle. *** Do this at your own risk *** If the unit is still under warranty, this will certainly void it. Be carreful of reassembly. > From: "NetGuy's eMail" <netguy at northwestcomputer.com> > Date: Sat, 27 Apr 2002 16:01:44 -0700 > Subject: (ASCEND) send help > > Hi, > > sorry for the intrusion, but upon searching the web for information on > Ascend/Lucent Max product, your mailing list came up. Anyway, I am looking > for instructions for nindy of the max2000.. Hope that you can help. If I > have reached this site in error, please feel free to shread this email into > tiny little pieces. > > thanks > > tod > > > FlameTester NorthWestComputer.Com, Inc. > Todd Hackett POBox 5458 > 425.252.7498 Everett, WA > 425.252.3231 fax 98206-5458 > > http://www.northwestcomputer.com netguy at northwestcomputer.com > > Of all the printed circuit boards I test > the smoke and fire one is the best > When you see that tiny mushroom cloud > you know that the flametester has been around > > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request at bungi.com > Archives: http://www.nexial.com/mailinglists/ > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/