From huiovo0421 at sina.com Sat Aug 3 05:10:46 2002 From: huiovo0421 at sina.com (huiovo0421) Date: Tue Jan 18 14:02:20 2005 Subject: [Ascend] (ASCEND) 域名注册 Message-ID: <200208031010.DAA12163@max.bungi.com> 尊敬的新老客户：您好! 　　这是来自商务网对您的问候。 首先感谢您对我们的关注，我公司为庆祝成立三周年特推出如下优惠产品： 1、200M（纯HTML空间）+ 送一国际域名，仅售150元/年； 2、60M空间+60M企业邮局 + 支持ASP，CGI + 送一国际域名，仅售236元/年； 3、100MP空间+100M企业邮局 + 支持ASP，CGI，ACCESS + 送一国际域名，仅售336元/年； 更多空间组合，更多选择---请点击我们的网站 http://www.huidns.com/ 　　 我公司是一家专门致力于高新网络技术的公司，有着多年的经验，在做虚拟主机方面我们 有着绝对的优势： ①主机100M的宽带接入(网通宽带在厦门的终端接入是由我司代理的)； ②拥有一批高级的网络管理人员，主机由我们自己严格管理； ③对所有的网站内容我们都进行备份，并进行实时监控保证了其稳定性； 如有网页制作需要请联系QQ：71800299　或mailto:webmaster@cn668.com 谢谢!　　 　　　　祝您马年吉祥、好运天天有、幸运常伴随!!! 福建省E商务网 mailto:webmaster@cn668.com ========================================================================================= 广告邮件对有用的人来说是信息，对无用人说的是垃圾。如果对您没用，我们万分抱歉！本邮件绝 对承诺只发送一次。如果您希望我们从列表中删除您的地址，请来信告诉我们您的地址。谢谢！ ========================================================================================== --------------------------------------------------------------- 沸点群发邮件,来自软件工程专家网(http://www.21cmm.com) 进CMM网校(http://www.21cmm.com)，成项目管理专家 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From primus at veris.org Mon Aug 5 15:29:43 2002 From: primus at veris.org (Ethan Butterfield) Date: Tue Jan 18 14:02:20 2005 Subject: [Ascend] Finger connections refused on MAX 6000 Message-ID: <20020805202943.GA94@veris.org> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Spent the last few days scouring documentation and doing web searches to find if someone else has had this same problem, but come up blank. I've got an Ascend MAX 6000 (one of 6), running software version 8.0.2. It previously had finger turned on (so our support department could get connection info for troubleshooting) and working fine. Last Wednesday, however, we used it to replace a very aging old MAX 6000 which used to be the head of our dial-up pool. The only configuration info that was changed was the Ascend's name, ethernet IP/subnetmask, default route, and dial-up pool assignment. Since the cutover, finger has stopped working and the port registers as closed. I've tried disabling/re-enabling finger to no avail. There were no active IP filters blocking TCP/UDP 53, but just in case I put in a couple of filters to explicitly allow the traffic to the MAX, and that didn't work. All the documentation I've read and the mailing list traffic I've found suggests that finger should really just work once you turn it on. Does anyone have any advice? The only thing I haven't tried is rebooting the MAX after making sure that Finger->Yes is saved in the active config. I'm loathe to do that as this is the first MAX in our dial-up pool and to do so would disconnect 47 customers pretty much any time of day. - -- "Even lands we once called home lie undiscovered and unknown. Only Heaven's silence for an answer." - VNV Nation, "Genesis" -----BEGIN PGP SIGNATURE----- Comment: For info see http://www.gnupg.org iD8DBQE9TuA2AmwSMwnpLHgRApiuAKC75kut0KVEpg5gALfpDyQB3MegRgCglu8e CAqFgLSDcGErkmPTGdFjJsw= =i4+H -----END PGP SIGNATURE----- From simon at igrin.co.nz Mon Aug 5 16:48:01 2002 From: simon at igrin.co.nz (Simon Byrnand) Date: Tue Jan 18 14:02:20 2005 Subject: [Ascend] Finger connections refused on MAX 6000 In-Reply-To: <20020805202943.GA94@veris.org> Message-ID: <3.0.6.32.20020806094801.009bba90@mail.igrin.co.nz> At 10:29 5/08/02 -1000, Ethan Butterfield wrote: >I've got an Ascend MAX 6000 (one of 6), running software version 8.0.2. It >previously had finger turned on (so our support department could get >connection info for troubleshooting) and working fine. Last Wednesday, >however, we used it to replace a very aging old MAX 6000 which used to be >the head of our dial-up pool. The only configuration info that was changed >was the Ascend's name, ethernet IP/subnetmask, default route, and dial-up >pool assignment. Since the cutover, finger has stopped working and the >port registers as closed. > >I've tried disabling/re-enabling finger to no avail. There were no active >IP filters blocking TCP/UDP 53, but just in case I put in a couple of >filters to explicitly allow the traffic to the MAX, and that didn't work. >All the documentation I've read and the mailing list traffic I've found >suggests that finger should really just work once you turn it on. > >Does anyone have any advice? The only thing I haven't tried is rebooting >the MAX after making sure that Finger->Yes is saved in the active config. >I'm loathe to do that as this is the first MAX in our dial-up pool and to >do so would disconnect 47 customers pretty much any time of day. Hi, One of our MAX6000's running 9.0.3 suddenly one day decided that finger wasn't going to work anymore. One of our servers polls the box using finger every 5 minutes for the purposes of graphing users online and other statistics. I don't recall whether it was prompted by a configuration change, or whether it happened by itself. At first the finger port was still open, but trying to access it produced no output, and timed out. Later on it changed to the finger port being closed and rejecting a connection completely. No amount of enabling or disabling finger would get it working again. Finally the box was rebooted for another reason, and ever since then finger has been working fine....the interesting thing is that the uptime when finger first stopped was less than two weeks. My guess is there is a bug in the finger daemon that persists as late as 9.0.3. I think you'll just have to bite the bullet and schedule a reboot for early in the morning when you have the minimum number of customers online.... Regards, Simon From akrall at team.inter.net Tue Aug 6 16:08:19 2002 From: akrall at team.inter.net (Anton Krall) Date: Tue Jan 18 14:02:21 2005 Subject: [Ascend] (ASCEND) Lucent TNT info line Message-ID: <001901c23d8d$640cf8d0$0101000a@mx.inter.net> Guys, can somebody please describe to me what all the info on this line from the TNT logs mean? Aug 6 16:00:54 200.52.95.119 1/6: [1/6/1/0] LAN session info: Conn=(? 0/0 33/185) Auth=(11 0/0 0/0) Sess=(0 0/0 0/0) [MBID 2; 5552417600->5220] [Answer] Thx for any help you can provide... Saludos Anton Krall Director de Tecnolog?a Inter.net M?xico / Panam? Tel; 5241-7609 Directo Tel: 5241-7600 Conmutador Celular: 0445-105-5160 ICQ: 4979450 email: akrall@team.inter.net web: http://www.mx.inter.net Outside Mexico: Office: +52(555)241-7609 PBX: +52(555)241-7600 Mobile: +52(555)105-5160 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.381 / Virus Database: 214 - Release Date: 8/2/2002 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From eisenber at UU.NET Wed Aug 7 05:25:01 2002 From: eisenber at UU.NET (Elias Isenberg) Date: Tue Jan 18 14:02:21 2005 Subject: [Ascend] (ASCEND) Idex Errors 1001,1006,and 1012 for a MAX TNT Message-ID: <3D50F57D.3AD104AB@uu.net> Hello, I'm receiving these errors for a standalone MAX TNT. There isn't an ethernet card for this tnt,so these errors must be for something else. Also running Software version 9.0.0e119. Two of the modm cards have been replaced prior to these errors showing up. Thank you for inquiry into this: WARNING: Index: 1001 Revision: 9.0.0e104 Shelf 1 (tntsr) Date: 08/07/2002. Time: 04:55:29 Location: 100e7e00 100e9484 1014c7fc 100ec2a0 1022fb00 100f9d74 WARNING: Index: 1006 Revision: 9.0.0e104 Shelf 1 (tntsr) Date: 08/07/2002. Time: 04:55:29 Location: 100e7e1c 100e9484 1014c7fc 100ec2a0 1022fb00 100f9d74 WARNING: Index: 1012 Revision: 9.0.0e104 Shelf 1 (tntsr) Date: 08/07/2002. Time: 04:55:38 Location: 100e9464 1014c7fc 100ec2a0 1022fb00 100f9d74 100f9d8c ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From troy at psknet.com Wed Aug 7 07:13:08 2002 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 14:02:21 2005 Subject: [Ascend] RE: (ASCEND) Lucent TNT info line In-Reply-To: <001901c23d8d$640cf8d0$0101000a@mx.inter.net> Message-ID: <000701c23e0b$cb0a7de0$7615c518@psknet.com> Anton, I don't do much with the syslog entries, intead I rely on the Radius accounting information for debugging connection issues. However, looking at this, I see a connect progress of 33, a disconnect cause of 185, and a connection speed of 0. This tells me that it was either a call from a regular phone or the modems weren't able to complete a handshake. If it was an actual modem, and this is happening every time the customer calls, there are a few things to try (in order of how we do it): - Disable V90 on the customer's modem - Have the customer update his modem firmware - Have the customer get the telco to fix his lines - Replace the modem HTH, -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com > -----Original Message----- > From: owner-ascend-users@max.bungi.com > [mailto:owner-ascend-users@max.bungi.com] On Behalf Of Anton Krall > Sent: Tuesday, August 06, 2002 5:08 PM > To: ascend-users@max.bungi.com > Subject: (ASCEND) Lucent TNT info line > > > Guys, can somebody please describe to me what all the info on > this line > from the TNT logs mean? > > Aug 6 16:00:54 200.52.95.119 1/6: [1/6/1/0] LAN session info: Conn=(? > 0/0 33/185) Auth=(11 0/0 0/0) Sess=(0 0/0 0/0) [MBID 2; > 5552417600->5220] [Answer] > > Thx for any help you can provide... > > Saludos > > Anton Krall > Director de Tecnolog?a > Inter.net M?xico / Panam? > > Tel; 5241-7609 Directo > Tel: 5241-7600 Conmutador > Celular: 0445-105-5160 > ICQ: 4979450 > email: akrall@team.inter.net > web: http://www.mx.inter.net > > Outside Mexico: > Office: +52(555)241-7609 > PBX: +52(555)241-7600 > Mobile: +52(555)105-5160 > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.381 / Virus Database: 214 - Release Date: 8/2/2002 > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to > ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From ANoriega at prima.com.ar Wed Aug 7 07:43:38 2002 From: ANoriega at prima.com.ar (Noriega, Alejandro) Date: Tue Jan 18 14:02:21 2005 Subject: [Ascend] (ASCEND) Lucent TNT info line Message-ID: LOG set call-info = end-of-call set syslog-format = max El formato con el cual estamos logueando es max como se ve especificado en la configuracion. Ejemplo: Mar 25 19:11:00 200.32.3.245/200.32.3.245 tntlimatasa-ciX.prima.com.ar ASCEND: shelf 1 slot 1 port 18, LAN session info, Conn=("anoriega" 114300000->0200 PPP 28800/50600 60/181 200.42.16.178) Auth=(19 355/14 218/10) Sess=(3595 40277/3176 316067/2115) Chan=(1 1 3 18) Modem=(1 4 18) [MBID 1285; 114300000->0200] Analisis del Log: Conn=(" anoriega" Usuario - User 114300000-> ANI 0200 DNIS PPP Protocolo - Protocol 28800/50600 Data Rate 60/181 Codigo de Progreso y Codigo de desconexion - Ascend Progress and Disconnect Codes 200.42.16.178) Direccion IP - IP Address Auth=( 19 Segundos antes de autenticar - seconds before authentication 355/14 Numero de bytes or paquetes recibidos durante la autenticacion - number of bytes or paquets recieved on the authentication 218/10) Numero de bytes or paquetes enviados durante la autenticacion - number of bytes or paquets sent on the authentication Sess=( 3595 Duracion de la sesion en segundos - Session duration in seconds. 40277/3176 Numero de bytes or paquetes recibidos durante la sesion - number of bytes or paquets recieved on the session 316067/2115) Numero de bytes or paquetes enviados durante la sesion - number of bytes or paquets recieved on the session Chan=( 1 Numero de Shelf. 1 Numero de Slot. 3 Numero de E1. 18) Numero de TS. - timeslot Modem=( 1 Numero de Shelf. 4 Numero de Slot 18) Numero de Modem MBID 1285 Identificador de la Sesion. - Session identifier Codigo de Progreso y Codigo de desconexion: 60: For a Telnet or raw TCP session, the host was reset. 181: The call was cleared by the system Ascend Progress and Disconnect Codes: http://noc.uni-mannheim.de/ascend/refgde/codes.htm Saludos, Alejandro J. Noriega Depto. Ingenier?a De Redes Pr!ma S.A Ciudad Internet \ Datamarkets Grupo Clar?n Tel:#: (54) 11-4370-6365 E-Mail: ANoriega@Prima.Com.AR -----Original Message----- From: Anton Krall [mailto:akrall@team.inter.net] Sent: Tuesday, August 06, 2002 6:08 PM To: ascend-users@max.bungi.com Subject: [Ascend] (ASCEND) Lucent TNT info line Guys, can somebody please describe to me what all the info on this line from the TNT logs mean? Aug 6 16:00:54 200.52.95.119 1/6: [1/6/1/0] LAN session info: Conn=(? 0/0 33/185) Auth=(11 0/0 0/0) Sess=(0 0/0 0/0) [MBID 2; 5552417600->5220] [Answer] Thx for any help you can provide... Saludos Anton Krall Director de Tecnolog?a Inter.net M?xico / Panam? Tel; 5241-7609 Directo Tel: 5241-7600 Conmutador Celular: 0445-105-5160 ICQ: 4979450 email: akrall@team.inter.net web: http://www.mx.inter.net Outside Mexico: Office: +52(555)241-7609 PBX: +52(555)241-7600 Mobile: +52(555)105-5160 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.381 / Virus Database: 214 - Release Date: 8/2/2002 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ _______________________________________________ rte-ascend mailing list rte-ascend@lists.real-time.com https://mailman.real-time.com/mailman/listinfo/rte-ascend From ANoriega at prima.com.ar Wed Aug 7 07:37:52 2002 From: ANoriega at prima.com.ar (Noriega, Alejandro) Date: Tue Jan 18 14:02:21 2005 Subject: [Ascend] (ASCEND) Lucent TNT info line Message-ID: LOG set call-info = end-of-call set syslog-format = max El formato con el cual estamos logueando es max como se ve especificado en la configuracion. Ejemplo: Mar 25 19:11:00 200.32.3.245/200.32.3.245 tntlimatasa-ciX.prima.com.ar ASCEND: shelf 1 slot 1 port 18, LAN session info, Conn=("anoriega" 114300000->0200 PPP 28800/50600 60/181 200.42.16.178) Auth=(19 355/14 218/10) Sess=(3595 40277/3176 316067/2115) Chan=(1 1 3 18) Modem=(1 4 18) [MBID 1285; 114300000->0200] Analisis del Log: Conn=(" anoriega" Usuario - User 114300000-> ANI 0200 DNIS PPP Protocolo - Protocol 28800/50600 Data Rate 60/181 Codigo de Progreso y Codigo de desconexion - Ascend Progress and Disconnect Codes 200.42.16.178) Direccion IP - IP Address Auth=( 19 Segundos antes de autenticar - seconds before authentication 355/14 Numero de bytes or paquetes recibidos durante la autenticacion - number of bytes or paquets recieved on the authentication 218/10) Numero de bytes or paquetes enviados durante la autenticacion - number of bytes or paquets sent on the authentication Sess=( 3595 Duracion de la sesion en segundos - Session duration in seconds. 40277/3176 Numero de bytes or paquetes recibidos durante la sesion - number of bytes or paquets recieved on the session 316067/2115) Numero de bytes or paquetes enviados durante la sesion - number of bytes or paquets recieved on the session Chan=( 1 Numero de Shelf. 1 Numero de Slot. 3 Numero de E1. 18) Numero de TS. - timeslot Modem=( 1 Numero de Shelf. 4 Numero de Slot 18) Numero de Modem MBID 1285 Identificador de la Sesion. - Session identifier Codigo de Progreso y Codigo de desconexion: 60: For a Telnet or raw TCP session, the host was reset. 181: The call was cleared by the system Ascend Progress and Disconnect Codes: http://noc.uni-mannheim.de/ascend/refgde/codes.htm Saludos, Alejandro J. Noriega Depto. Ingenier?a De Redes Pr!ma S.A Ciudad Internet \ Datamarkets Grupo Clar?n Tel:#: (54) 11-4370-6365 E-Mail: ANoriega@Prima.Com.AR -----Original Message----- From: Anton Krall [mailto:akrall@team.inter.net] Sent: Tuesday, August 06, 2002 6:08 PM To: ascend-users@max.bungi.com Subject: [Ascend] (ASCEND) Lucent TNT info line Guys, can somebody please describe to me what all the info on this line from the TNT logs mean? Aug 6 16:00:54 200.52.95.119 1/6: [1/6/1/0] LAN session info: Conn=(? 0/0 33/185) Auth=(11 0/0 0/0) Sess=(0 0/0 0/0) [MBID 2; 5552417600->5220] [Answer] Thx for any help you can provide... Saludos Anton Krall Director de Tecnolog?a Inter.net M?xico / Panam? Tel; 5241-7609 Directo Tel: 5241-7600 Conmutador Celular: 0445-105-5160 ICQ: 4979450 email: akrall@team.inter.net web: http://www.mx.inter.net Outside Mexico: Office: +52(555)241-7609 PBX: +52(555)241-7600 Mobile: +52(555)105-5160 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.381 / Virus Database: 214 - Release Date: 8/2/2002 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ _______________________________________________ rte-ascend mailing list rte-ascend@lists.real-time.com https://mailman.real-time.com/mailman/listinfo/rte-ascend ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From tbaker at dctexas.net Wed Aug 7 11:04:04 2002 From: tbaker at dctexas.net (Tim Baker) Date: Tue Jan 18 14:02:21 2005 Subject: [Ascend] Working Config Message-ID: Wondering if anyone has a working config for Multivoice on Max TNT using 96 modem DSP cards. Tim Baker Digi Comm Communications DCTexas Internet 16427 FM 344 W Bullard, Texas 75757 Ph 903-825-6600 Fx 903-825-6605 tbaker@dctexas.net --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.380 / Virus Database: 213 - Release Date: 7/24/02 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020807/c3f90950/attachment.htm From gustavo.villate at conexiongroup.com Wed Aug 7 11:42:18 2002 From: gustavo.villate at conexiongroup.com (Gustavo Villate) Date: Tue Jan 18 14:02:21 2005 Subject: [Ascend] Working Config References: Message-ID: <011001c23e31$64f9b040$8100a8c0@conexion.com.py> I have some multivoice boxes with 96 dsp cards, you need taos version 9 or later. regards -- Gustavo Villate R&D Consultant ConeXion S.A. gustavo.villate@conexiongroup.com (595) 21 440104 (595) 981 417436 ----- Original Message ----- From: Tim Baker To: Ascend Users List Sent: Wednesday, August 07, 2002 12:04 PM Subject: [Ascend] Working Config Wondering if anyone has a working config for Multivoice on Max TNT using 96 modem DSP cards. Tim Baker Digi Comm Communications DCTexas Internet 16427 FM 344 W Bullard, Texas 75757 Ph 903-825-6600 Fx 903-825-6605 tbaker@dctexas.net -------------- next part -------------- An HTML attachment was scrubbed... URL: http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020807/64a8b092/attachment.html From ANoriega at prima.com.ar Wed Aug 7 18:57:38 2002 From: ANoriega at prima.com.ar (Noriega, Alejandro) Date: Tue Jan 18 14:02:21 2005 Subject: [Ascend] Messages Message-ID: -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Anybod knows what this messages means? ASCEND: Radius client timeout (code=1) for user shilton1929 ASCEND: Radius client timeout (code=1) for user 0002767538 ASCEND: Can't read debug profile for 1/4 ASCEND: ../csmxdrv.c:6630 - chips 0x400 reboot requested ASCEND: Protection violation: ind = 00010000 addrType = 00001000 at 00000000 1022f364 102438f4 10243bbc 10231184 10252c04^M Thanks, Alejandro J. Noriega Depto. Ingenier?a De Redes Pr!ma S.A Ciudad Internet \ Datamarkets Grupo Clar?n Tel:#: (54) 11-4370-6365 E-Mail: ANoriega@Prima.Com.AR -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 7.0.3 for non-commercial use iQA/AwUBPVGz8pRAV++SVr2fEQLiCACfVRVU0T2dOJMNRCi3SNdyOoHoIhIAniwQ yi+FcE5vbVkn006EyWe3r9gl =cKh/ -----END PGP SIGNATURE----- -------------- next part -------------- A non-text attachment was scrubbed... Name: PGPexch.htm.asc Type: application/octet-stream Size: 1165 bytes Desc: PGPexch.htm.asc Url : http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020807/600ec293/PGPexch.htm.obj From tbaker at dctexas.net Thu Aug 8 12:19:34 2002 From: tbaker at dctexas.net (Tim Baker) Date: Tue Jan 18 14:02:22 2005 Subject: [Ascend] Multivoice on TNT Message-ID: Anyone have an example config to make MAX TNT w/ multivoice communicate with an aftermarket gatekeeper. Using TAOS 9.09. Need help getting started. Tim Baker Digi Comm Communications DCTexas Internet 16427 FM 344 W Bullard, Texas 75757 Ph 903-825-6600 Fx 903-825-6605 tbaker@dctexas.net --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.380 / Virus Database: 213 - Release Date: 7/24/02 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020808/b0b295a5/attachment.html From prashanth_b_bhat at yahoo.com Thu Aug 8 14:02:15 2002 From: prashanth_b_bhat at yahoo.com (Prashanth Bhat) Date: Tue Jan 18 14:02:22 2005 Subject: [Ascend] (ASCEND) Use of Pipeline routers in India Message-ID: <20020808190215.33858.qmail@web20804.mail.yahoo.com> Hello, Has anyone on this list tried using an ISDN Pipeline router in India? I plan to buy one in the US, and take it with me for use in India. Any tips for configuration and setup would be welcome. Would the U model (with built in NT) work OK in India? Thanks, Prashanth __________________________________________________ Do You Yahoo!? HotJobs - Search Thousands of New Jobs http://www.hotjobs.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From jim at top.net Thu Aug 8 16:28:30 2002 From: jim at top.net (Jim Logan) Date: Tue Jan 18 14:02:22 2005 Subject: [Ascend] (ASCEND) [isp-services] Ascend Pipe/Max for Sale Message-ID: <4.2.0.58.20020808162652.01472c58@mail.top.net> All Pipeline units have Firewall/IPSec, if applicable, and current version of AOS installed. Pipe50's (P50-1UBRI or UBRI-ASA): $ 125 Ea or Complete in open Box: $140 Pipe50's (P50-LS56): $ 70 Ea Pipe75's (P75-1UBRI or UBRI-ASA): $ 145 Ea Pipe75x25 (P75-1UBRI-X25): $ 125 Pipe75Sbri (P75S-ASA): $ 100 Pipe85's (P85-1UBRI): $ 135 Ea Pipe130's (P130-UBRI-V35): $ 175 Pipe130's (P130-LS56-2N-ASA): $ 175 Pipe DSL Unit (Mdl: DSL-DMT): $ 100 Pipe DSL Unit (Mdl: DSL-Cell-50S): $ 100 Super Pipe 155 (SP155-T1-2U): $ 400 (Several) Max Stuff: Max 200 Plus, NIB, with PCMCIA Cards for the ISDN Ports: $ 100 Max MultiBand RPM: $ 95 Ea Max Multiband, PL-4BRI-STD: $ 125 Max Multiband, PL-1T1-STD: $ 125 Max 1800, Unit and Power Cord only: $ 400 Max 4004, MXHP-4T1-2 w/48 V.34 Modems: $ 250 Max V.34 Cards (MX-SL-8MOD-V34): $ 15 each All items guarentee'd 30 days, new items contain warranty cards and may have longer warranty from Lucent. All items in excellent/refurb condition if not new. Payments accepted via Credit Cards, COD via Fedex, and some established customers qualify for Net Accounts. All items available for immediate shipment. ******* Top Net InterNet Services ******** Omaha, Nebraska www.top.net Voice: (402) 960-1494 Fax: (402) 333-8383 Pager: (402) 977-2880 ******************************************* --------------------------------------------------------------------- To unsubscribe, e-mail: isp-services-unsubscribe@ispc.org For additional commands, e-mail: isp-services-help@ispc.org ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From jim at top.net Thu Aug 8 16:28:30 2002 From: jim at top.net (Jim Logan) Date: Tue Jan 18 14:02:22 2005 Subject: [Ascend] (ASCEND) Ascend Pipe/Max for Sale Message-ID: <4.2.0.58.20020808162652.01472c58@mail.top.net> All Pipeline units have Firewall/IPSec, if applicable, and current version of AOS installed. Pipe50's (P50-1UBRI or UBRI-ASA): $ 125 Ea or Complete in open Box: $140 Pipe50's (P50-LS56): $ 70 Ea Pipe75's (P75-1UBRI or UBRI-ASA): $ 145 Ea Pipe75x25 (P75-1UBRI-X25): $ 125 Pipe75Sbri (P75S-ASA): $ 100 Pipe85's (P85-1UBRI): $ 135 Ea Pipe130's (P130-UBRI-V35): $ 175 Pipe130's (P130-LS56-2N-ASA): $ 175 Pipe DSL Unit (Mdl: DSL-DMT): $ 100 Pipe DSL Unit (Mdl: DSL-Cell-50S): $ 100 Super Pipe 155 (SP155-T1-2U): $ 400 (Several) Max Stuff: Max 200 Plus, NIB, with PCMCIA Cards for the ISDN Ports: $ 100 Max MultiBand RPM: $ 95 Ea Max Multiband, PL-4BRI-STD: $ 125 Max Multiband, PL-1T1-STD: $ 125 Max 1800, Unit and Power Cord only: $ 400 Max 4004, MXHP-4T1-2 w/48 V.34 Modems: $ 250 Max V.34 Cards (MX-SL-8MOD-V34): $ 15 each All items guarentee'd 30 days, new items contain warranty cards and may have longer warranty from Lucent. All items in excellent/refurb condition if not new. Payments accepted via Credit Cards, COD via Fedex, and some established customers qualify for Net Accounts. All items available for immediate shipment. ******* Top Net InterNet Services ******** Omaha, Nebraska www.top.net Voice: (402) 960-1494 Fax: (402) 333-8383 Pager: (402) 977-2880 ******************************************* ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From vbranyik at piopc.com Thu Aug 8 16:58:19 2002 From: vbranyik at piopc.com (Vilmos Branyik) Date: Tue Jan 18 14:02:22 2005 Subject: [Ascend] (ASCEND) Terminal server Message-ID: Hello all. From troy at psknet.com Fri Aug 9 06:04:02 2002 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 14:02:22 2005 Subject: [Ascend] RE: (ASCEND) Terminal server In-Reply-To: Message-ID: <000501c23f94$78c34cd0$1014c518@psknet.com> First, are users getting a login prompt or command prompt? If they're getting a command prompt, the first thing to do, is to secure your max. If they are getting a login prompt, you can prevent them from getting a command prompt by setting PPP as a check item in Radius. If they don't authenticate via PPP/PAP, they will not be authenticated at all. -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com > -----Original Message----- > From: owner-ascend-users@max.bungi.com > [mailto:owner-ascend-users@max.bungi.com] On Behalf Of Vilmos Branyik > Sent: Thursday, August 08, 2002 5:58 PM > To: ascend-users@max.bungi.com > Subject: (ASCEND) Terminal server > > > Hello all. > > From time to time I find someone attached to our Max 4000 > routers in termsrv > mode. > > Is there a way to disable someone's ability to do this. I saw > the TS Enable > parameter in the docs but it says it's required for incoming calls. > > Basically I just want users to be able to log in and authenticate and > nothing more. > > How would I go about setting this up. > > Thanks in advance. > > Matt Branyik > www.piopc.net > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to > ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From MPuras at solunet.com Fri Aug 9 08:33:30 2002 From: MPuras at solunet.com (MPuras@solunet.com) Date: Tue Jan 18 14:02:22 2005 Subject: [Ascend] test Message-ID: <719546A93D7DD511BA7800D0B7A87DF0FCC2B4@trinidad.solunet.com> test Thanks, Mario Puras SoluNet Technical Support * Mailto: mpuras@solunet.com * Direct: (321) 309-1410 * 888.449.5766 (USA) / 888.SOLUNET (Canada) From jky at awesomenet.net Fri Aug 9 12:49:24 2002 From: jky at awesomenet.net (James K. Young) Date: Tue Jan 18 14:02:22 2005 Subject: [Ascend] new to mail list Message-ID: <83030-22002859174924535@awesomenet.net> how can i view archives of this list? thanks From bspca at email.com Sat Aug 10 10:34:56 2002 From: bspca at email.com (shlca) Date: Tue Jan 18 14:02:22 2005 Subject: [Ascend] (ASCEND) . rccc Message-ID: <200208101534.IAA17997@max.bungi.com> An HTML attachment was scrubbed... URL: http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020810/7d957923/attachment.htm From salesandleads7864 at Flashmail.com Sun Aug 11 04:33:37 2002 From: salesandleads7864 at Flashmail.com (salesandleads7864@Flashmail.com) Date: Tue Jan 18 14:02:22 2005 Subject: [Ascend] (ASCEND) 24/7 Bulk Emailing Service Available Now! 28153 Message-ID: <0000714c0d53$00006fc8$0000127b@444> There is NO stumbling on to it! The greatest way of marketing this century is undoubtedly direct E-mail. It's similar to the postman delivering a letter to your Mailbox. The ability to promote your product, service, website, or MLM/network marketing opportunity to millions instantly is what advertisers have been dreaming of for over 100 years. We e-mail your one page promotion to a list of our General addresses. The greatest part is, it's Completely affordable. E-MAIL MARKETING IS THE ANSWER! How do we know? We know because that's exactly what we do. It's a proven fact that you can attract new business through Direct E-mail Marketing. The profits that E-mail advertising generates are amazing! We are living proof. We are a direct E-mail Internet advertising company and Our clients pay us thousands of dollars a week to E-mail Their products and services. We don't want any one spending thousands on a direct email marketing Campaign with out testing the market to see how it works. STANDARD PRICING AND PROCEDURES ----------------------------------------------------------------------- EXTRACTING: Our list of general Internet addresses are actually extracted From b.weeber at viastore.de Tue Aug 13 03:55:53 2002 From: b.weeber at viastore.de (Burkhard Weeber) Date: Tue Jan 18 14:02:22 2005 Subject: [Ascend] (ASCEND) MAX and NAT Message-ID: <000201c242a7$3beaa400$d2edcfd9@viastore.de> Hello, has anyone ever successfully used outgoing NAT on a MAX ? What I want to do is: - Connect to another router - Accept the offered IP address - NAT all connections to the destination of that profile to the accepted IP address. BINTEC routers can do that, but I would like to have these special connections done on my MAX6000 with RADIUS. If anyone could send me a template it would be great. TiA Burkhard Weeber viastore systems GmbH P/O Box 300668 D-70446 Stuttgart Tel: +49-711-9818-0 Email: B.Weeber@viastore.de Disclaimer: The opinions expressed herein are my personal points of view and do not represent those of my employer. Windows95: n. 32 bit extensions and a graphical shell for a 16 bit patch to an 8 bit operating system originally coded for a 4 bit microprocessor, written by a 2 bit company, that can't stand 1 bit of competition. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From an at telelev.net Wed Aug 14 03:32:27 2002 From: an at telelev.net (an) Date: Tue Jan 18 14:02:22 2005 Subject: [Ascend] Ascend-Maximum-Channels with MAX TNT AND cistron RADIUS Message-ID: <3D5A159B.9070301@telelev.net> Hey, I use cistron RADIUS 1.6.6 with MAX TNT AND MAX 6000. "Ascend-Maximum-Channels" attribute works fine with MAX 6000, but not with MAX TNT. How can I controll multiple B-Channel logins on the MAX TNT? The best solution for me were to make it possible for some users to login either with 2x B-channels from one machine or from 2 machines simultan with 1 B-channel per machine. The "Simultaneous-Use" solution from cistron Radius sounds well, but works not realy related to this problem. MAX TNT with 8x E1 lines Sotware version 7.2.4 The most radadius user profiles look like: xxxxxx Password = "xxxxxxx" User-Service = Framed-User, Framed-Protocol = PPP, Ascend-Assign-IP-Pool = 1, Ascend-Maximum-Channels = 2 Users that have "Ascend-Maximum-Channels = 1" attribute set can login on MAX TNT with 2 or more B-cannels too. HELP! regards alik From charsal at halcyon.com Wed Aug 14 10:59:09 2002 From: charsal at halcyon.com (charsal) Date: Tue Jan 18 14:02:22 2005 Subject: [Ascend] (no subject) Message-ID: <001201c243ab$873596e0$05fe3fce@rdecuir> From prashanth_b_bhat at yahoo.com Wed Aug 14 14:13:32 2002 From: prashanth_b_bhat at yahoo.com (Prashanth Bhat) Date: Tue Jan 18 14:02:22 2005 Subject: [Ascend] (ASCEND) Which version of s/w to Download Message-ID: <20020814191332.78065.qmail@web20803.mail.yahoo.com> I have a Pipeline 85, which I bought used. It has software release 6.1.19 installed on it. I would like to upgrade to the current version by downloading from Lucent's ftp site. Could somebody please help by pointing me to the correct version? Also, I don't have the password to the Pipeline device. Any suggestions on how I can retrieve it? Thanks. __________________________________________________ Do You Yahoo!? HotJobs - Search Thousands of New Jobs http://www.hotjobs.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From james+ascend at vincentsystems.com Wed Aug 14 22:33:26 2002 From: james+ascend at vincentsystems.com (James Sneeringer) Date: Tue Jan 18 14:02:23 2005 Subject: [Ascend] Re: (ASCEND) Which version of s/w to Download In-Reply-To: <20020814191332.78065.qmail@web20803.mail.yahoo.com> References: <20020814191332.78065.qmail@web20803.mail.yahoo.com> Message-ID: <20020815033326.GA4897@valjean.si.ocslink.com> On Wed, Aug 14, 2002 at 12:13:32PM -0700, Prashanth Bhat wrote: | I have a Pipeline 85, which I bought used. It has | software release 6.1.19 installed on it. I would like | to upgrade to the current version by downloading from | Lucent's ftp site. Could somebody please help by | pointing me to the correct version? Updated versions of the software, called TAOS, can be found at: ftp://ftp.ascend.com/pub/Software-Releases/Pipeline/ Get the files "Upgrade-Filenames.txt" and "Upgrade-Instructions.txt" from that directory, as they will be helpful. The Pipe85 uses the same software as the Pipe75. The latest versions are 7.3.4 or 8.0-101.2. The 7.3.4 release is a bit older, but is more thoroughly tested. The 8.0 release adds support for multiple NAT maps and some minor bugfixes. Both have been quite stable for us. Files relative to the above URL, with their primary differences: .../Release-7.3.X/7.3.4/b2a.p75 (IPX AppleTalk) .../Release-7.3.X/7.3.4/b2ix.p75 (X.25, IPsec) .../Release-8.0-101.2/b2.p75 (IPX) .../Release-8.0-101.2/b2a.p75 (IPX and AppleTalk) All support TCP/IP and the usual Internet-related features. My company uses 7.3.4/b2ix on all our customer routers and have had no problems with it. The 8.0 seems to work fine as well. | Also, I don't have the password to the Pipeline | device. Any suggestions on how I can retrieve it? If you have the Full Access password, you can bypass telnet by connecting on the console with a straight-through serial cable (like you would use with an external modem). Connect with setting 9600 8-N-1. You might try this anyway. People selling them used often wipe the configs first. If this is the case, the default Full Access password is "Ascend". If you don't have the Full Access password, your only choice is to NINDY the router (wipe the config and upload a new TAOS). Lucent has a document describing the procedure on their support site. I can't provide a URL, as they use cookies to prevent deep linking, so you can find it like this: 1) Go to https://support.lucent.com/cgi-bin/gx.cgi/AppLogic+dns.ProdIndex?LINK=Prodcontent 2) Scroll down until you find the Pipeline 85 link and follow it 3) Go to Techincal Notes 4) Search for the note titled "How to NINDY the Pipeline 50/75/85 Unit" (Watch the URL above, it's long and may wrap on your display.) -James ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From petercleary at sympatico.ca Thu Aug 15 07:05:34 2002 From: petercleary at sympatico.ca (Peter Cleary) Date: Tue Jan 18 14:02:23 2005 Subject: [Ascend] RE: (ASCEND) Which version of s/w to Download In-Reply-To: <20020815033326.GA4897@valjean.si.ocslink.com> Message-ID: Hate to say it but that link requires a password... Lucent locks up all support. Of course one could by a support package from them (rolleyes goes here). -----Original Message----- From: owner-ascend-users@max.bungi.com [mailto:owner-ascend-users@max.bungi.com]On Behalf Of James Sneeringer Sent: Wednesday, August 14, 2002 11:33 PM 1) Go to https://support.lucent.com/cgi-bin/gx.cgi/AppLogic+dns.ProdIndex?LINK=Prodco ntent ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From james+ascend at vincentsystems.com Fri Aug 16 13:36:31 2002 From: james+ascend at vincentsystems.com (James Sneeringer) Date: Tue Jan 18 14:02:23 2005 Subject: [Ascend] Re: (ASCEND) Which version of s/w to Download In-Reply-To: References: <20020815033326.GA4897@valjean.si.ocslink.com> Message-ID: <20020816183631.GA11007@valjean.si.ocslink.com> On Thu, Aug 15, 2002 at 08:05:34AM -0400, Peter Cleary wrote: | Hate to say it but that link requires a password... Lucent locks up all | support. Of course one could by a support package from them (rolleyes goes | here). Argh. Sorry. You can still get it with guest access, they just don't make it obvious. Try this: 1) Go to http://www.lucent.com/support/documentation.html 2) Click on the first link, "General Access Documentation" 3) Find and click on the product you want. The Pipelines are about halfway down the page. 4) Go to "Technical Notes" 5) Look for the NINDY document. Yes, their support site is quite annoying, but there's a lot of useful information hidden away in it. -James ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From jed1000 at spinfinder.com Sun Aug 18 17:30:24 2002 From: jed1000 at spinfinder.com (joseph edward) Date: Tue Jan 18 14:02:23 2005 Subject: [Ascend] (ASCEND) business assistance Message-ID: <200208181530.IAA27686@max.bungi.com> STRICTLY CONFIDENTIAL & URGENT. I am Mr, Joseph Edward a native of Cape Town in South Africa and I am an Executive Accountant with the South Africa DEPARTMENT OF MINERAL RESOURCES AND ENERGY First and foremost, I apologized using this medium to reach you for a transaction/business of this magnitude, but this is due to Confidentiality and prompt access reposed on this medium. I have decided to seek a confidential co-operation with you in the execution of the deal described Hereunder for the benefit of all parties and hope you will keep it as a top secret because of the nature of this transaction. Within the Department of Mining & Natural Resources where I work as an Executive Accountant and with the cooperation of four other top officials, we have in our possession as overdue payment bills totaling Twenty - One Million, Five Hundred Thousand U. S. Dollars ($21,500,000.) which we want to transfer abroad with the assistance and cooperation of a foreign company/individual to receive the said fund on our behalf or a reliable foreign non-company account to receive such funds. More so, we are handicapped in the circumstances, as the South Africa Civil Service Code of Conduct does not allow us to operate offshore account hence your importance in the whole transaction. This amount $21.5m represents the balance of the total contract value executed on behalf of my Department by a foreign contracting firm, which we the officials over-invoiced deliberately. Though the actual contract cost have been paid to the original contractor, leaving the balance in the Tune of the said amount which we have in principles gotten approval to remit by Key tested Telegraphic Transfer (K.T.T) to any foreign bank account you will provide by filing in an application through the Justice Ministry here in South Africa for the transfer of rights and privileges of the former contractor to you. I have the authority of my partners involved to propose that should you be willing to assist us in the transaction, your share of the sum will be 25% of the $21.5 million, 70% for us and 5% for taxation and miscellaneous expenses. The business itself is 100% safe, on your part provided you treat it with utmost secrecy and confidentiality. Also your area of specialization is not a hindrance to the successful execution of this transaction. I have reposed my confidence in you and hope that you will not disappoint me. Endeavor to contact me immediately my e-mail address whether or not you are interested in this deal. If you are not, it will enable me scout for another foreign partner to carry out this deal I want to assure you that my partners and myself are in a position to make the payment of this claim possible provided you can give us a very strong Assurance and guarantee that our share will be secured and please remember to treat this matter as very confidential matter, because we will not comprehend with any form of exposure as we are still in active Government Service and remember once again that time is of the essence in this business. I wait in anticipation of your fullest co-operation. Yours faithfully, JOSEPH EDWARD reply to edward_joseph@email.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From max_and_tnt at hotmail.com Tue Aug 20 14:23:29 2002 From: max_and_tnt at hotmail.com (Joe Max) Date: Tue Jan 18 14:02:23 2005 Subject: [Ascend] Re: (ASCEND) MAX TNT and disconnect = 39 Message-ID: Look in the event.mib file corresponding to the version you are running. Disconnect code 39 means "Closing LCP because all opened NCPs were closed". In other words, it is a fairly normal disconnect. >From: Nubia.Molfetta@centertap.com.br >To: ascend-users@bungi.com >Subject: (ASCEND) MAX TNT and disconnect = 39 >Date: Fri, 26 Jul 2002 16:47:52 -0300 > > >Hi, > >Iam working with TNT and like to know what does disconnect = 39 mean? > >Thank you _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From max_and_tnt at hotmail.com Tue Aug 20 14:19:09 2002 From: max_and_tnt at hotmail.com (Joe Max) Date: Tue Jan 18 14:02:23 2005 Subject: [Ascend] Re: (ASCEND) Idex Errors 1001,1006,and 1012 for a MAX TNT Message-ID: You probably had a coredump server configured on the box and the box was trying to use it (presumably, your fatal log should show some other entries besides the ones below). My guess is that the configured coredump server was unreachable at the time that the TNT tried to dump its core. >From: Elias Isenberg >To: ascend-users@bungi.com >Subject: (ASCEND) Idex Errors 1001,1006,and 1012 for a MAX TNT >Date: Wed, 07 Aug 2002 10:25:01 +0000 > >Hello, > > >I'm receiving these errors for a standalone MAX TNT. There isn't an >ethernet card for this tnt,so these errors must be for something else. >Also running Software version 9.0.0e119. Two of the modm cards have been >replaced prior to these errors showing up. Thank you for inquiry into >this: > > > > WARNING: Index: 1001 Revision: 9.0.0e104 Shelf 1 (tntsr) > Date: 08/07/2002. Time: 04:55:29 > Location: 100e7e00 100e9484 1014c7fc 100ec2a0 1022fb00 100f9d74 > > > WARNING: Index: 1006 Revision: 9.0.0e104 Shelf 1 (tntsr) > Date: 08/07/2002. Time: 04:55:29 > Location: 100e7e1c 100e9484 1014c7fc 100ec2a0 1022fb00 100f9d74 > > > WARNING: Index: 1012 Revision: 9.0.0e104 Shelf 1 (tntsr) > Date: 08/07/2002. Time: 04:55:38 > Location: 100e9464 1014c7fc 100ec2a0 1022fb00 100f9d74 100f9d8c _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From max_and_tnt at hotmail.com Tue Aug 20 14:37:41 2002 From: max_and_tnt at hotmail.com (Joe Max) Date: Tue Jan 18 14:02:23 2005 Subject: [Ascend] Re: (ASCEND) Password recovery for CVMAX100 (ASCEND UNIT) Message-ID: There is no password recovery mechanism. If you forgot the password, you have only a couple of choices: 1) if you had SNMP enabled and you know the community strings, you can download the config using SNMP and just read the password from the downloaded file. 2) otherwise, you are pretty much SOL. Your only other choice is Nindy. I have never run nindy on a cvmax or on a terminator, so I can't really help you with the procedure. You probably will need to spend some time going thru Lucent's web site. :-( Good luck. -Joe >From: "Patrick Faget" >To: >Subject: (ASCEND) Password recovery for CVMAX100 (ASCEND UNIT) >Date: Thu, 13 Jun 2002 22:42:54 -0300 > > Hello, > > We have a CVMAX100 unit from Ascend (usually called as DSL >Terminator by Lucent) and unfortunately we forgot the password that gives >us full privileges. We are only seeing the equipment configuration by the >default access. > > Does anybody have a password recovery procedure for the CVMAX100? > > > > Thank you for help, > > Patrick _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From max_and_tnt at hotmail.com Tue Aug 20 14:50:59 2002 From: max_and_tnt at hotmail.com (Joe Max) Date: Tue Jan 18 14:02:23 2005 Subject: [Ascend] Re: (ASCEND) Reset TNT with Protected Serial Port Message-ID: You need to get into Nindy and reload the code. How this is done, depends on the model of the shelf controller: 1) if it has a tiny rotary switch accessible from the far left on the back panel, then set it to 0, power cycle the TNT, connect a terminal to the console port at 9600,8,n,1 and you are ready to go. 2) if it doesn't have the switch, then, connect a terminal to the console port at 9600,8,n,1, power cycle the TNT and within 10 seconds of the first prompt you see type "Ascend" (it is case sensitive). That should get you into Nindy. From wcooley at nakedape.cc Tue Aug 20 18:11:17 2002 From: wcooley at nakedape.cc (Wil Cooley) Date: Tue Jan 18 14:02:23 2005 Subject: [Ascend] (ASCEND) Resetting DSLPipe to factory defaults? Message-ID: <20020820231117.GA31677@rheingold.nakedape.priv> I can't find a way in my manuals to reset a DSLPipe (either the DSL-HS for SDSL or the DSL-ACAP for ADSL) configuration back to factory defaults. Is there a way? The ADSL unit I have up now is running version 6.1.0. Wil -- Wil Cooley wcooley@nakedape.cc Naked Ape Consulting http://nakedape.cc * * * * Linux, UNIX, Networking and Security Solutions * * * * QCSNet http://www.qcsn.com * * * * T1, Frame Relay, DSL, Dial-up, and Web Hosting * * * * -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available Url : http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020820/630aa3dd/attachment.pgp From wcooley at nakedape.cc Tue Aug 20 18:43:02 2002 From: wcooley at nakedape.cc (Wil Cooley) Date: Tue Jan 18 14:02:23 2005 Subject: [Ascend] (ASCEND) Service models and other questions Message-ID: <20020820234301.GC31677@rheingold.nakedape.priv> I've been given the responsibility of managing a deployment of a TNT DSL installation for a small municipal-utility ISP. I'm trying to figure out what service model we're going use. Currently, we're going to be using DSLPipe CPEs for both SDSL and ADSL (the ADSL uses CAP, not DMT, and I have no control over that). As a user of DSL myself, I've been partial to bridging with static IP adresses. I've deployed this setup at another ISP using a Cisco and IRB (integrated routing and bridging), over Verizon's older frame-relay based service. As you know, of course, the TNT DSL supports bridging, PPP, frame-relay, etc, as do the DSLPipes. We'd prefer to not be married to the DSLPipes, however, so we would have the option of using other CPEs. The TNT manuals I have are older (copyright 1998) and make no mention of bridging (nor do they even refer to the OS as TAOS). What I want to know is: 1. Is bridging w/static IP addresses a workable model? I'd prefer to use neither PPP nor other layer 2 protocols at all (yes, I know a layer 2 protocol is necessary; I'm assuming with bridging I'm just bridging Ethernet--I don't want the clients to have to set up any special software other than TCP/IP configuration in their client OSes). 2. Will it be easy with this model to assign additional IP addresses, should the client want one? 3. Can I prevent users from just taking an unassigned IP address and using it with this model? I know that with the frame and IRB setup I'm using I associate the DLCI with the IP addresses, but this isn't configured the same way. 4. Should I be able to use most other RADSL-CAP CPEs and which ones do people have experience with and recommend? 5. Where can I get these cables with 50-pin amphenol connector to 4x DB-37 connectors? 6. The guy providing the upstream bandwidth is claiming that he can't give us IP addys to assign to every client, due to "new ARIN rules". I've asked him for references, but not gotten any. I think he's probably mistaken or full of it; does anyone know anything about this? I'd prefer to not have to do NAT or masquerading because it breaks some client applications (not to mention complicating my dynamic routing), but I have a Linux router if necessary. Wil -- Wil Cooley wcooley@nakedape.cc Naked Ape Consulting http://nakedape.cc * * * * Linux, UNIX, Networking and Security Solutions * * * * QCSNet http://www.qcsn.com * * * * T1, Frame Relay, DSL, Dial-up, and Web Hosting * * * * -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: not available Url : http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020820/63f50688/attachment.pgp From wcooley at nakedape.cc Tue Aug 20 23:21:30 2002 From: wcooley at nakedape.cc (Wil Cooley) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] (ASCEND) Resetting DSLPipe to factory defaults? In-Reply-To: <20020820231117.GA31677@rheingold.nakedape.priv> References: <20020820231117.GA31677@rheingold.nakedape.priv> Message-ID: <1029903690.909.33.camel@rheingold> On Tue, 2002-08-20 at 16:11, Wil Cooley wrote: > I can't find a way in my manuals to reset a DSLPipe (either > the DSL-HS for SDSL or the DSL-ACAP for ADSL) configuration > back to factory defaults. Is there a way? The ADSL unit I > have up now is running version 6.1.0. To answer my own question, just for the archives: http://www.stic.net/tech/ISDN/LucentPipelineReset.html Wil -- Wil Cooley wcooley@nakedape.cc Naked Ape Consulting http://nakedape.cc * * * * Linux, UNIX, Networking and Security Solutions * * * * QCSNet http://www.qcsn.com * * * * T1, Frame Relay, DSL, Dial-up, and Web Hosting * * * * -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 232 bytes Desc: This is a digitally signed message part Url : http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020820/17a3fa42/attachment.pgp From mawb at asiainfo.com Wed Aug 21 03:06:07 2002 From: mawb at asiainfo.com (Wenbin Ma) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] (ASCEND) What does sysLastRestartReason Code 2 stand for? Message-ID: <35DE082769ACD311A9AE009027C3CBC9040C5C72@aints2.asiainfo.com> And,where can I find RestartReason Code detail? Thanks. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From james+ascend at vincentsystems.com Wed Aug 21 10:19:46 2002 From: james+ascend at vincentsystems.com (James Sneeringer) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] Re: (ASCEND) Service models and other questions In-Reply-To: <20020820234301.GC31677@rheingold.nakedape.priv> References: <20020820234301.GC31677@rheingold.nakedape.priv> Message-ID: <20020821151946.GA24969@valjean.si.ocslink.com> On Tue, Aug 20, 2002 at 04:43:02PM -0700, Wil Cooley wrote: | 6. The guy providing the upstream bandwidth is claiming that | he can't give us IP addys to assign to every client, due to | "new ARIN rules". There are no such rules. Your upstream is wrong. ARIN's IPv4 addressing policies can be found at: http://www.arin.net/policy/ipv4.html The closest thing to what your provider is claiming is the section on cable modems, but it only talks about SWIP requirements. There is nothing about not assigning unique addresses to broadband clients. | I'd prefer to not have to do | NAT or masquerading because it breaks some client applications | (not to mention complicating my dynamic routing), but I have | a Linux router if necessary. You don't want to go down this road. It will break things and you will have many unhappy customers on your hands. -James ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From nick_hall at btinternet.com Wed Aug 21 18:23:18 2002 From: nick_hall at btinternet.com (nick_hall@btinternet.com) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] TCP timeout problems with a pipeline 75 using multiple ISDN channels Message-ID: <2875733.1029972198151.JavaMail.root@127.0.0.1> Folks, I'm running a pipeline 75(v2), TAOS release 8.0-101.2 in a standard ISP dialup setup (one connection profile, NAT). I've tried checking the list FAQ, lucentdocs.com and many google searches, but have come up with nothing that seems to help. Here are the details:- When I run the ISDN link at 64k, all is well. However, when I force the link to 128k, TCP connections either drop or become bouncy (as if packets are being dropped) - for example, ftp connects but then eventually dies with errors about not being able to establish the control connection, telnet sessions become very bouncy and eventually hang. If it helps, I had to manually force the link to 128k, as I can't get it to add the bandwidth on demand. I've tested the same line/ISP with an ISDN card in the back of the PC with no NAT and all is well at 128k. Can anyone shed any light on what might be wrong or give me any pointers to documentation I can look at? Cheers, Nick. From montgomd at corp.earthlink.net Wed Aug 21 17:18:53 2002 From: montgomd at corp.earthlink.net (Dave Montgomery) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] (ASCEND) Telnet login authentication via RADIUS? Message-ID: <002f01c24960$bbe21840$70c602cf@paco> It looks like it's possible from the docs but I can't quite see the solution: With regards to TNT's and APX's, How can I specify that telnet sessions should be authenticated via RADIUS? Also, is there a way to specify this server indepently of the one used by dialup subscibers (ie, telnet users authenticate on RADIUS server A and dialup users authenticate on RADIUS server B). Thanks. ---Dave ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From walter at mx-06.intimail.com Thu Aug 22 06:28:27 2002 From: walter at mx-06.intimail.com (Cancer-less Life) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] (ASCEND) cc: Quite Smoking in 90-days - Guaranteed - Proven Results 11.100 Message-ID: <18baf01c249cf$08ed42e0$0906fea9@freeyankeedom.com> Quite Smoking Guaranteed - This is the Proven Stop-Smoking formula! http://www.bluefoxmedia.com/lead/nicph1 The World's Easiest Way to Loss 10-12 lbs. Nothing to Lose but Extra Weight - Guarantee! http://www.bluefoxmedia.com/lead/slim2 Natural Breast Enlargement Can Happen for You http://www.bluefoxmedia.com/lead/bust3/ If you wish to leave this list please use the link below. http://www.qves.com/trim/?ascend-users@max.bungi.com%7C10%7C264010 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From besbesbesbes at hotmail.com Thu Aug 22 08:24:25 2002 From: besbesbesbes at hotmail.com (bassem sabry) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] Simple Question Message-ID: Hi all I want to know the standard ratios for the lucent Progress code and Disconnect causese .. _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com From besbesbesbes at hotmail.com Thu Aug 22 08:14:32 2002 From: besbesbesbes at hotmail.com (bassem sabry) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] (ASCEND) disconnect causes Message-ID: Hi all Cand anyone please explain the progress code , disconnect causes of TNT, i don't want the lucent description ... i just want to know the standard ratios of each one of the codes.. Thanks & Regards Bassem Sabry _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From MPuras at solunet.com Thu Aug 22 09:54:42 2002 From: MPuras at solunet.com (MPuras@solunet.com) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] Using CHAP Bi-Directional-Auth-Required with NavisRadius Message-ID: <719546A93D7DD511BA7800D0B7A87DF0FCC3BB@trinidad.solunet.com> Hi All, I was hoping someone can share some light on this issue. I am working with NavisRadius trying to get this outbound call established with CHAP. Prior to bringing Radius into the picture, I set up a connection profile on the Max to dialout to the remote router using Bi-Directional CHAP required. That connection profile works well and I can establish an outbound call and negotiate Bi-directional CHAP authentication. I brought NavisRadius into the picture to achieve the same thing as what I did on the local connection profile. I started on Navis by just getting the connection to dialout without any authentication which I got it to connect and pass traffic. Once I configure bi-directional CHAP in Radius, I see the call going out and the CHAP handshake process going except that when the remote router send me his CHAP packet type 3 (success) stating that they authenticated my response successfully, the Max immediately send a termination Request and takes the link down before sending out a CHAP packet type 3 to the remote router as it did with the connection profile on the Max. I have pasted the dialout profile below (Changing a few string before posting it). Can someone point out to me what I am missing? Has anyone done this before? I have read the Lucent manuals and their example does not work. dialout User-Name = "remote" Service-Type = Outbound-User, Framed-Protocol = PPP, Ascend-Route-IP = Route-IP-Yes, Framed-IP-Netmask = 255.255.255.255, Ascend-Bi-Directional-Auth = Bi-Directional-Auth-Required, Ascend-Recv-Name = "remote", Ascend-Receive-Secret = "secret", Ascend-Send-Auth = Send-Auth-CHAP, Ascend-Authen-Alias = "mymaxname", Ascend-Send-Secret = "secret", Ascend-Data-Svc = Switched-modem, Ascend-Idle-Limit = 1800, Ascend-Maximum-Call-Duration = 120, Filter-Id = "1", Ascend-Call-Filter = "ip out forward" Thanks, Mario Puras SoluNet From MPuras at solunet.com Thu Aug 22 09:57:16 2002 From: MPuras at solunet.com (MPuras@solunet.com) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] (ASCEND) Using CHAP Bi-Directional-Auth-Required with NavisRadius Message-ID: <719546A93D7DD511BA7800D0B7A87DF0FCC3BD@trinidad.solunet.com> Hi All, I was hoping someone can share some light on this issue. I am working with NavisRadius trying to get this outbound call established with CHAP. Prior to bringing Radius into the picture, I set up a connection profile on the Max to dialout to the remote router using Bi-Directional CHAP required. That connection profile works well and I can establish an outbound call and negotiate Bi-directional CHAP authentication. I brought NavisRadius into the picture to achieve the same thing as what I did on the local connection profile. I started on Navis by just getting the connection to dialout without any authentication which I got it to connect and pass traffic. Once I configure bi-directional CHAP in Radius, I see the call going out and the CHAP handshake process going except that when the remote router send me his CHAP packet type 3 (success) stating that they authenticated my response successfully, the Max immediately send a termination Request and takes the link down before sending out a CHAP packet type 3 to the remote router as it did with the connection profile on the Max. I have pasted the dialout profile below (Changing a few string before posting it). Can someone point out to me what I am missing? Has anyone done this before? I have read the Lucent manuals and their example does not work. dialout User-Name = "remote" Service-Type = Outbound-User, Framed-Protocol = PPP, Ascend-Route-IP = Route-IP-Yes, Framed-IP-Netmask = 255.255.255.255, Ascend-Bi-Directional-Auth = Bi-Directional-Auth-Required, Ascend-Recv-Name = "remote", Ascend-Receive-Secret = "secret", Ascend-Send-Auth = Send-Auth-CHAP, Ascend-Authen-Alias = "mymaxname", Ascend-Send-Secret = "secret", Ascend-Data-Svc = Switched-modem, Ascend-Idle-Limit = 1800, Ascend-Maximum-Call-Duration = 120, Filter-Id = "1", Ascend-Call-Filter = "ip out forward" Thanks, Mario Puras SoluNet ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From DPascarella at solunet.com Thu Aug 22 10:36:27 2002 From: DPascarella at solunet.com (DPascarella@solunet.com) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] (ASCEND) Telnet login authentication via RADIUS? Message-ID: <719546A93D7DD511BA7800D0B7A87DF0E3B145@trinidad.solunet.com> It is possible by setting telnet to use 'auth-settings' instead of 'global'. Auth settings will use the current primary active external authenticator that you have specified in 'external-auth', auth-type. You could do proxy radius to separate dialin and network users. Dialin users would use a delimiting character and be proxied to another realm for authentication based on the realm they specify (eg. 'user@realm1'). Telnet users can authenticate using the local RADIUS server only, if you want, by not specifying a realm as part of their username when logging in. (eg 'user') There may be other ways but this is the first to come to mind. David Pascarella CCNP MCSE LCTE A+ Network Support Engineer SOLUServe TAC 1571 Robert J. Conlan Blvd., Suite 110 Palm Bay, FL 32905-3562 888.449.5766 800.795.2814 fax: 321.308.7986 mailto:dpascarella@solunet.com www.solunet.com -----Original Message----- From: Dave Montgomery [mailto:montgomd@corp.earthlink.net] Sent: Wednesday, August 21, 2002 6:19 PM To: ascend-users@bungi.com Subject: [Ascend] (ASCEND) Telnet login authentication via RADIUS? It looks like it's possible from the docs but I can't quite see the solution: With regards to TNT's and APX's, How can I specify that telnet sessions should be authenticated via RADIUS? Also, is there a way to specify this server indepently of the one used by dialup subscibers (ie, telnet users authenticate on RADIUS server A and dialup users authenticate on RADIUS server B). Thanks. ---Dave ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ _______________________________________________ rte-ascend mailing list rte-ascend@lists.real-time.com https://mailman.real-time.com/mailman/listinfo/rte-ascend ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From eric at cirr.com Thu Aug 22 21:13:51 2002 From: eric at cirr.com (Eric Schnoebelen) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] (ASCEND) Telnet login authentication via RADIUS? In-Reply-To: Your message of "Thu, 22 Aug 2002 11:36:27 EDT." <719546A93D7DD511BA7800D0B7A87DF0E3B145@trinidad.solunet.com> Message-ID: <200208230213.g7N2Dp812428@egsner.cirr.com> DPascarella@solunet.com writes: - It is possible by setting telnet to use 'auth-settings' instead - of 'global'. Auth settings will use the current primary active - external authenticator that you have specified in 'external-auth', - auth-type. I've got this to kinda work, or at least the MAX is trying to authenticate, and RADIUS is saying OK. However, All I'm getting is another `login:' prompt. So, what attributes should RADIUS be providing back to the MAXen? Thanks, Eric -- Eric Schnoebelen eric@cirr.com http://www.cirr.com When confronted by a difficult problem just reduce it to the question, "How would Captain Kirk handle this?" ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From Neilhkky at au.ru Sat Aug 24 19:11:19 2002 From: Neilhkky at au.ru (Ina Deligdisch) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] (ASCEND) Secure Your Employment qwl Message-ID: YOUR DEGREE MAY BE CLOSER THAN YOU THINK We remove the obstacles that cause adults to abandon hope. DID YOU KNOW that you could earn your legitimate Associate's, Bachelor's, Master's or even Doctorate degree, utilizing your already existing professional or academic expertise? Obtain a prosperous future, money earning power, and the admiration of all. Prepare for the professional advancement you deserve. If you are an adult with a high school diploma and have a minimum of three years of experience in the field you are seeking a degree in, YOU QUALIFY. As you know, employers continually hire, promote and give raises to new employees that have ZERO skills or experience, just because they have that piece of paper. Take part in the wealth now! Within days you can apply for that unreachable job, or show your degree to your employer and demand the raise and promotion that your knowledge and skills deserve. How does this work? You graduate without attending classes, or taking a leave of absence from your current job. You receive you degree based on life and work experience! The degree earned by our students enables them to qualify for career advancement and personal growth, while breaking down the wall that prevents them from receiving big money. Degree verification and official transcripts will be provided in writing when requested by employers and others authorized by the graduate. Our college & University transcripts meet the highest academic standards. Our University issues a degree printed on premium diploma paper, bearing an official gold raised college seal. No one is turned down. Confidentiality assured. CALL 1-602-230-4252 to receive your diploma within days!!! Call 24 hours a day, 7 days a week, including Sundays and holidays. for off reply with off ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From prashanth_b_bhat at yahoo.com Sun Aug 25 21:29:31 2002 From: prashanth_b_bhat at yahoo.com (Prashanth Bhat) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] (ASCEND) Using Software VPN (Contivity from Nortel) over Pipeline P85 Message-ID: <20020826022931.38461.qmail@web20809.mail.yahoo.com> Hello, I am using the Pipeline P85 at home, and I just finished setting it up. I'm able to successfully access my ISP, and access the internet from my PC. My ISP gives me a dynamic IP address (DHCP), so I've set up the P85 with a private address (192.168.100.1), and my computer has 192.168.100.2 (as recommended in the Start Here guide, in Chapter 1). Things work fine, but when I try to run a software VPN client (Contivity VPN from Nortel networks), I am unable to get through. I am not using the hardware VPN facility provided by the Pipeline itself, because the remote site (at my office) does not have a Pipeline device. Any suggestions? If anyone here has used the Contivity VPN from Nortel, your experiences would be especially helpful. Thanks, Prashanth __________________________________________________ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From prashanth_b_bhat at yahoo.com Mon Aug 26 06:21:11 2002 From: prashanth_b_bhat at yahoo.com (Prashanth Bhat) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] (ASCEND) IPSec Message-ID: <20020826112111.84378.qmail@web20806.mail.yahoo.com> I have a Pipeline P85 at home, running software version 6.1.43. I have installed the b2i.p75 module, and am trying to use IPSec on this router. I believe I need a feature code for this purpose. Could someone please let me know how I could obtain the same? Thanks, Prashanth __________________________________________________ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From DPascarella at solunet.com Mon Aug 26 09:31:47 2002 From: DPascarella at solunet.com (DPascarella@solunet.com) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] (ASCEND) IPSec Message-ID: <719546A93D7DD511BA7800D0B7A87DF0E3B14F@trinidad.solunet.com> Try Here ---> http://ipsec.ascend.com/webform David Pascarella CCNP MCSE LCTE A+ Network Support Engineer SOLUServe TAC 1571 Robert J. Conlan Blvd., Suite 110 Palm Bay, FL 32905-3562 888.449.5766 800.795.2814 fax: 321.308.7986 mailto:dpascarella@solunet.com www.solunet.com -----Original Message----- From: Prashanth Bhat [mailto:prashanth_b_bhat@yahoo.com] Sent: Monday, August 26, 2002 7:21 AM To: ascend-users@bungi.com Subject: [Ascend] (ASCEND) IPSec I have a Pipeline P85 at home, running software version 6.1.43. I have installed the b2i.p75 module, and am trying to use IPSec on this router. I believe I need a feature code for this purpose. Could someone please let me know how I could obtain the same? Thanks, Prashanth __________________________________________________ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ _______________________________________________ rte-ascend mailing list rte-ascend@lists.real-time.com https://mailman.real-time.com/mailman/listinfo/rte-ascend ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From alec at mobilia.it Tue Aug 27 12:16:41 2002 From: alec at mobilia.it (Alec) Date: Tue Jan 18 14:02:24 2005 Subject: [Ascend] Ascend hardware request Message-ID: <00b101c24ded$8324a540$4a01a8c0@mobilia.srl> I am asking abt availability of Ascend hardware, Dial Access Concentrators. Thanks for attention n regards. Alec -------------- next part -------------- An HTML attachment was scrubbed... URL: http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020827/f1e04220/attachment.htm From nsten at o1.com Tue Aug 27 17:52:39 2002 From: nsten at o1.com (Nicholas Sten) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] MAX TNT / APX and VoIP In-Reply-To: Message-ID: <4.2.2.20020827154956.017c8228@66.81.1.25> I was wondering is anyone has come across any open-source VoIP Gatekeeper products (i.e., not Lucent's MVAM) that interoperate with the MAX TNT / APX hardware acting as VoIP Gateways. Nicholas Sten Manager, Special Projects and Emerging Technologies O1 Communications http://www.o1.com nsten@o1.com 916-554-2133 From johnroby at mx03.readyserve21.com Wed Aug 28 02:44:28 2002 From: johnroby at mx03.readyserve21.com (johnroby@mx03.readyserve21.com) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] (ASCEND) $250,000 for only $6.50 per month. xsnbddvjfw Message-ID: <200208280744.g7S7iSU21239@mx10.readyserve21.com> When America's top companies compete for your business, you win. In today's world, it's important to expect the unexpected. When preparing for the future, we must always consider our family. To plan for your family's future, the right life insurance policy is a necessity. But who wants to pay too much for life insurance? Let us help you find the right quote, quickly and easily... Compare your coverage... $250,000... as low as $6.50 per month. $500,000... as low as $9.50 per month. $1,000,000... as low as $15.50 per month. http://quotes.readyserve21.com/sure_quote/LF06-237600/ Take a moment. Let us show you that we are here to save time, and money. Receive up to 15 quotes in seconds. http://quotes.readyserve21.com/sure_quote/LF06-237600/ Click here to delete your address from future updates. http://quotes.readyserve21.com/sure_quote/rm/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From prashanth_b_bhat at yahoo.com Wed Aug 28 23:47:58 2002 From: prashanth_b_bhat at yahoo.com (Prashanth Bhat) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] (ASCEND) Contivity VPN Message-ID: <20020829044758.99995.qmail@web20806.mail.yahoo.com> Thanks. I was able to download and install it. My Pipeline now has IPSec, but it still doesn't seem to solve my original problem. i.e. I cannot run my software VPN client (Contivity, from Nortel). My sysadmin suggests that I try to set up the Pipeline in a "passthrough" mode, if such a mode exists. i.e. the pipeline should pass the IPSec packets unmodified, and let the s/w client handle it. Has anyone had luck running Contivity VPN software through an Ascend router? Note: My ISP gives me a dynamic IP address. Thanks, Prashanth --- DPascarella@solunet.com wrote: > Try Here ---> http://ipsec.ascend.com/webform > __________________________________________________ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From mfrater at quicksilver.co.nz Thu Aug 29 01:10:51 2002 From: mfrater at quicksilver.co.nz (Mark Frater) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] MAX TNT / APX and VoIP References: <200208290540.g7T5e9M29083@sprite.real-time.com> Message-ID: <004901c24f22$d406e820$0a8259ca@quicksilver.co.nz> Have you tried http://www.openh323.org? I must admit I have, but struggled with the documentation or lack of it. I am interested to know if you get this one or another one working. Mark Frater Technical Director, Mercury Telecommunications Level 3, The Textile Centre, Kenwyn Street, Parnell, Auckland P.O.Box 99856, Newmarket, Auckland ph +64-9-916-0300 fx +64-9-9160301 mb +64-21-336-598 >Message: 14 >Date: Tue, 27 Aug 2002 15:52:39 -0700 >To: rte-ascend@lists.real-time.com >From: Nicholas Sten >Subject: [Ascend] MAX TNT / APX and VoIP > >I was wondering is anyone has come across any open-source VoIP Gatekeeper >products (i.e., not Lucent's MVAM) that interoperate with the MAX TNT / APX >hardware acting as VoIP Gateways. > >Nicholas Sten >Manager, Special Projects and Emerging Technologies >O1 Communications >http://www.o1.com >nsten@o1.com >916-554-2133 From jack at jackpapa.com.bungi.com Thu Aug 29 15:26:16 2002 From: jack at jackpapa.com.bungi.com (Jack) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] (ASCEND) Hi Message-ID: <200208290956.CAA19144@max.bungi.com> An HTML attachment was scrubbed... URL: http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020829/83b4dfa3/attachment.html From karl.gaissmaier at rz.uni-ulm.de Thu Aug 29 05:11:38 2002 From: karl.gaissmaier at rz.uni-ulm.de (Karl Gaissmaier) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] (ASCEND) MAX 4000 and POST FAILURE (05), some help needed Message-ID: <3D6DF35A.728C8FBA@rz.uni-ulm.de> Hi Ascend Users, one of my colleagues had a power break and afterwards one MAX 4000 has a Power-On Self Test failure (05) Does anyone know what hardware component could be broken? Does anyone know what additional tests (monitor commands?) can be executed to get more info? Best regards and thanks in advance Charly -- Karl Gaissmaier Computing Center,University of Ulm,Germany Email:karl.gaissmaier@rz.uni-ulm.de Network Administration Tel.: ++49 731 50-22499 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From kasmier at cedarville.com Thu Aug 29 06:10:58 2002 From: kasmier at cedarville.com (George) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] (ASCEND) max 6000 Message-ID: <3D6E0142.6050804@cedarville.com> how can I tell where the CRC errors are comming from? I have a max 6000 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From karl.gaissmaier at rz.uni-ulm.de Thu Aug 29 10:32:41 2002 From: karl.gaissmaier at rz.uni-ulm.de (Karl Gaissmaier) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] Re: (ASCEND) MAX 4000 and POST FAILURE (05), some help needed References: <000d01c24f6b$bb061c30$08fbab3f@psknet.com> Message-ID: <3D6E3E99.F2E43F8C@rz.uni-ulm.de> Hi Troy, Troy Settle schrieb: > > Karl, > > You can try reloading the code from the NINDY interface. If that fails > to get the max booting, you'll likely need to replace it. aehm, what is the NINDY interface? You don't have to spend time to explain it, just show me a pointer to the description. Thanks in advance Charly -- Karl Gaissmaier Computing Center,University of Ulm,Germany Email:karl.gaissmaier@rz.uni-ulm.de Network Administration Tel.: ++49 731 50-22499 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From troy at psknet.com Thu Aug 29 10:36:09 2002 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] RE: (ASCEND) MAX 4000 and POST FAILURE (05), some help needed In-Reply-To: <3D6E3E99.F2E43F8C@rz.uni-ulm.de> Message-ID: <001301c24f71$cc41ac70$08fbab3f@psknet.com> http://www.tek-tips.com/gviewthread.cfm/lev2/8/lev3/58/pid/574/qid/28963 6 Enjoy, -- Troy Settle Pulaski Networks http://www.psknet.com 540.994.4254 - 866.477.5638 > -----Original Message----- > From: Karl Gaissmaier [mailto:karl.gaissmaier@rz.uni-ulm.de] > Sent: Thursday, August 29, 2002 11:33 AM > To: Troy Settle > Cc: ascend-users@bungi.com > Subject: Re: (ASCEND) MAX 4000 and POST FAILURE (05), some help needed > > > Hi Troy, > > Troy Settle schrieb: > > > > Karl, > > > > You can try reloading the code from the NINDY interface. > If that fails > > to get the max booting, you'll likely need to replace it. > > aehm, what is the NINDY interface? You don't have to spend time > to explain it, just show me a pointer to the description. > > Thanks in advance > Charly > -- > Karl Gaissmaier Computing Center,University of Ulm,Germany > Email:karl.gaissmaier@rz.uni-ulm.de Network Administration > Tel.: ++49 731 50-22499 > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From karl.gaissmaier at rz.uni-ulm.de Thu Aug 29 11:29:22 2002 From: karl.gaissmaier at rz.uni-ulm.de (Karl Gaissmaier) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] (ASCEND) MAX 4000 and POST FAILURE (05), some help needed References: <719546A93D7DD511BA7800D0B7A87DF0E3B17D@trinidad.solunet.com> Message-ID: <3D6E4BE2.14CCC94F@rz.uni-ulm.de> Hello all Ascend Users, DPascarella@solunet.com schrieb: > > Hi Charly, > > It sounds like your bootloader has been corrupted. There is a 128k > partition in flash that is used for a bootloader file. It's possible that > this partition/file has become corrupted and will need to be reflashed. > >From what you have described, you cannot get past POST and therefore cannot > get into 'diag' mode on the MAX. In this case, you will likely have to > NINDY the MAX in order to restore good code onto your flash. NINDY is an thanks so far for all the help, I found the NINDY doc on the Internet: http://nag.ru/goodies/hak/nindy.doc perhaps someone saves this on a proper place for our grandchilds. Regards Charly -- Karl Gaissmaier Computing Center,University of Ulm,Germany Email:karl.gaissmaier@rz.uni-ulm.de Network Administration Tel.: ++49 731 50-22499 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From cclements at cp-tel.net Thu Aug 29 11:47:44 2002 From: cclements at cp-tel.net (Chris Clements) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] (ASCEND) 128K ISDN session across two MAXs Message-ID: Ascend/Lucent Gurus, I have noticed that some of our 128K ISDN customers will establish one 64K session to one MAX but their second channel will connect to a second MAX in the stack. Can the MAXs bond those sessions together to work at 128K? Is there any special configuration tasks I need to look into? I cannot confirm that it is NOT currently working. So any suggestions are appreciated. --Chris ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From nsten at o1.com Thu Aug 29 13:22:46 2002 From: nsten at o1.com (Nicholas N. Sten) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] MAX TNT / APX and VoIP Message-ID: Actually, we're trying that right now with a test TNT. Not sure how to check if the TNT has registerd with the gatekeeper, though. I'll keep you posted offline, Mark, and we can summarize if the group is interested when we're done. -Nick -----Original Message----- From: Mark Frater [mailto:mfrater@quicksilver.co.nz] Sent: Wednesday, August 28, 2002 11:11 PM To: rte-ascend@lists.real-time.com Cc: Nicholas N. Sten Subject: [Ascend] MAX TNT / APX and VoIP Have you tried http://www.openh323.org? I must admit I have, but struggled with the documentation or lack of it. I am interested to know if you get this one or another one working. Mark Frater Technical Director, Mercury Telecommunications Level 3, The Textile Centre, Kenwyn Street, Parnell, Auckland P.O.Box 99856, Newmarket, Auckland ph +64-9-916-0300 fx +64-9-9160301 mb +64-21-336-598 From james+ascend at vincentsystems.com Thu Aug 29 13:53:47 2002 From: james+ascend at vincentsystems.com (James Sneeringer) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] Re: (ASCEND) 128K ISDN session across two MAXs In-Reply-To: References: Message-ID: <20020829185347.GA27986@valjean.si.ocslink.com> On Thu, Aug 29, 2002 at 11:47:44AM -0500, Chris Clements wrote: | I have noticed that some of our 128K ISDN customers will establish one 64K | session to one MAX but their second channel will connect to a second MAX in | the stack. Can the MAXs bond those sessions together to work at 128K? Is | there any special configuration tasks I need to look into? I cannot confirm | that it is NOT currently working. So any suggestions are appreciated. Stacking must be enabled, and I believe all MAXen involved must be on the same IP subnet. I think stacking is enabled by default, but you can check by going to: Ethernet -> Mod Config -> Stack Options Just make sure each MAX uses the same stack name and UDP port. If you're on TAOS 8.x or higher, make sure the multicast group is the same as well. -James ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From gustavo.villate at conexiongroup.com Thu Aug 29 20:56:59 2002 From: gustavo.villate at conexiongroup.com (Gustavo Villate) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] MAX TNT / APX and VoIP References: Message-ID: <005001c24fc8$c6d38680$8100a8c0@conexion.com.py> In order to know if your tnt has registered to the mvam you have to do.. admin>debug on admin> h323deb you will see here all h323 packages.... and to stop debug debug off.... -- Gustavo Villate R&D Consultant ConeXion S.A. gustavo.villate@conexiongroup.com (595) 21 440104 (595) 981 417436 ----- Original Message ----- From: "Nicholas N. Sten" To: "Mark Frater" ; Sent: Thursday, August 29, 2002 2:22 PM Subject: RE: [Ascend] MAX TNT / APX and VoIP > Actually, we're trying that right now with a test TNT. Not sure how to check if the TNT has registerd with the gatekeeper, though. I'll keep you posted offline, Mark, and we can summarize if the group is interested when we're done. > > -Nick > > > -----Original Message----- > From: Mark Frater [mailto:mfrater@quicksilver.co.nz] > Sent: Wednesday, August 28, 2002 11:11 PM > To: rte-ascend@lists.real-time.com > Cc: Nicholas N. Sten > Subject: [Ascend] MAX TNT / APX and VoIP > > > Have you tried http://www.openh323.org? > I must admit I have, but struggled with the documentation or lack of it. > I am interested to know if you get this one or another one working. > > Mark Frater > Technical Director, Mercury Telecommunications > Level 3, The Textile Centre, Kenwyn Street, Parnell, Auckland > P.O.Box 99856, Newmarket, Auckland > ph +64-9-916-0300 fx +64-9-9160301 mb +64-21-336-598 > > _______________________________________________ > rte-ascend mailing list > rte-ascend@lists.real-time.com > https://mailman.real-time.com/mailman/listinfo/rte-ascend > From troy at psknet.com Thu Aug 29 09:52:43 2002 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] RE: (ASCEND) MAX 4000 and POST FAILURE (05), some help needed In-Reply-To: <3D6DF35A.728C8FBA@rz.uni-ulm.de> Message-ID: <000d01c24f6b$bb061c30$08fbab3f@psknet.com> Karl, You can try reloading the code from the NINDY interface. If that fails to get the max booting, you'll likely need to replace it. Good luck, -- Troy Settle Pulaski Networks http://www.psknet.com 540.994.4254 - 866.477.5638 > -----Original Message----- > From: owner-ascend-users@max.bungi.com > [mailto:owner-ascend-users@max.bungi.com] On Behalf Of Karl Gaissmaier > Sent: Thursday, August 29, 2002 6:12 AM > To: ascend-users@bungi.com > Subject: (ASCEND) MAX 4000 and POST FAILURE (05), some help needed > > > Hi Ascend Users, > > one of my colleagues had a power break and afterwards one MAX 4000 > has a Power-On Self Test failure (05) > > Does anyone know what hardware component could be broken? > Does anyone know what additional tests (monitor commands?) > can be executed to get more info? > > Best regards and thanks in advance > Charly > -- > Karl Gaissmaier Computing Center,University of Ulm,Germany > Email:karl.gaissmaier@rz.uni-ulm.de Network Administration > Tel.: ++49 731 50-22499 > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to > ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From bostonte at quik.com Fri Aug 30 12:11:51 2002 From: bostonte at quik.com (QUIK INTERNET TECH) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] config of Pipeline for PC Anywhere Message-ID: <5.1.0.14.2.20020830130104.0298a280@pop.quik.com> Hello I am hoping that any of you professionals out there might be able to assist me with a configuration issue with an Ascend Pipeline 75 ISDN router. I am currently in charge of a small office network and a specific database program that we have purchased and installed is not working correctly. The authors need PC anywhere access through our router to help diagnose and correct the issues with the database. In order to do this they have asked for me to configure the Pipeline to: Allow their public IP: 66.152.236.146 across any firewall that may be set up in the router and also forward IP request from them (66.152.236.146) to the static IP address of my router for ports 5631 and 5632 to 192.168.1.100. Although I has able to fumble my way through the initial configuration of this router I am clueless on how to accomplish this task correctly. Any assistance will be greatly appreciated Best Regards John Farrell From troy at psknet.com Thu Aug 29 09:54:01 2002 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 14:02:25 2005 Subject: [Ascend] RE: (ASCEND) max 6000 In-Reply-To: <3D6E0142.6050804@cedarville.com> Message-ID: <000e01c24f6b$e95fcd60$08fbab3f@psknet.com> George, In my experience, CRC errors are the result of a bad T1. The most likely suspect is the cable running from the smartjack to the CSU. If this isn't the problem, have the telco loop up your CSU and run a payload test. Their test equipment will be able to identify any problems on the line between the switch and your CSU. Good luck, -- Troy Settle Pulaski Networks http://www.psknet.com 540.994.4254 - 866.477.5638 > -----Original Message----- > From: owner-ascend-users@max.bungi.com > [mailto:owner-ascend-users@max.bungi.com] On Behalf Of George > Sent: Thursday, August 29, 2002 7:11 AM > To: ascend-users@bungi.com > Subject: (ASCEND) max 6000 > > > how can I tell where the CRC errors are comming from? > I have a max 6000 > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to > ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From isp2 at quik.com Thu Aug 29 10:25:05 2002 From: isp2 at quik.com (John Farrell) Date: Tue Jan 18 14:02:26 2005 Subject: [Ascend] Ascend pipeline Message-ID: <5.1.0.14.2.20020829110558.02720780@pop.quik.com> Hello I am hoping that any of you professionals out there might be able to assist me with a configuration issue with an Ascend Pipeline 75 ISDN router. I am currently in charge of a small office network and a specific database program that we have purchased and installed is not working correctly. The authors need PC anywhere access through our router to help diagnose and correct the issues with the database. In order to do this they have asked for me to configure the Pipeline to: Allow their public IP: 66.152.236.146 across any firewall that may be set up in the router and also forward IP request from them (66.152.236.146) to the static IP address of my router for ports 5631 and 5632 to 192.168.1.100. Although I has able to fumble my way through the initial configuration of this router I am clueless on how to accomplish this task correctly. Any assistance will be greatly appreciated Best Regards John Farrell From mknewman at blkbox.com Sat Aug 31 08:26:10 2002 From: mknewman at blkbox.com (Marc Newman) Date: Tue Jan 18 14:02:26 2005 Subject: [Ascend] (ASCEND) Ascend gear for sale In-Reply-To: <200208300545.WAA23977@max.bungi.com> from "owner-ascend-users-digest@max.bungi.com" at Aug 29, 2002 10:45:02 PM Message-ID: <200208311326.g7VDQASw018510@blkbox.com> I have the following for sale: 4 Ascend Max 4004 (1 has Frame relay option, all have ISDN PRI) 11 56kb 8 port modem cards 7 56kb 12 port modem cards Please contact me off list at marc@newman.org for prices and such. Thanks, Marc ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From alexander.puchana at telefonica-data.com.co Wed Aug 28 17:46:28 2002 From: alexander.puchana at telefonica-data.com.co (Alexander Puchana) Date: Tue Jan 18 14:02:26 2005 Subject: [Ascend] (ASCEND) Dial Problems on Max 6000 Message-ID: <3D6D52C4.58C17502@telefonica-data.com.co> Hi I'm looking for some help whith a Max 6000. I'm having some problems but i don't know who can i contact for help. Please let me know if you can or if don't, please, tell me who can. Here is a brief of the problems I'm having. I have one Max 6000 but my users are complaining about the quoality of service. 1. Sometimes it is difficult to get connected. Access Server has a serial conection to my central network. Pings are good and have good round trip time (50 - 70 ms) 2. When you are on-line, there is no traffic between user's modem and the Max. I make a ping to a user ip address and i see the time is very higth (35 a 40 segs). 3. It is very difficult to surf the net whith this connection. Rgds, Alexander Puchana -------------- next part -------------- A non-text attachment was scrubbed... Name: alexander.puchana.vcf Type: text/x-vcard Size: 384 bytes Desc: Card for Alexander Puchana Url : http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020828/b0245312/alexander.puchana.vcf From DPascarella at solunet.com Thu Aug 29 10:55:49 2002 From: DPascarella at solunet.com (DPascarella@solunet.com) Date: Tue Jan 18 14:02:26 2005 Subject: [Ascend] (ASCEND) max 6000 Message-ID: <719546A93D7DD511BA7800D0B7A87DF0E3B17C@trinidad.solunet.com> Hi George, You might want to look at your FDL stats for each trunk.(see below) They will show how many Error Events (EE) you have had in the last 24 hours and in various increments up to 24 hours. The FDL events are 'seen' by the MAX and occur on the trunk itself. You can then take this information and go to your telco with it. Also rule out your hardware, if possible, by swapping ports and different RAS boxes to see if the CRC's follow the trunk or a particular port/chassis. All of this is assuming that you have the correct config for your trunks and have ruled that out as well. A Facilities Data Link (FDL) is a 4-Kbps digital link between a sender and the telephone company's monitors. The FDL uses Extended Superframe (ESF) framing, a framing format that consists of 24 consecutive frames, separated by framing bits. The telephone company uses an FDL to check on the quality and performance of T1 lines. It provides information at regular intervals to your carrier's maintenance devices. The MAX unit continues to accumulate ESF performance statistics in the FDL Stats windows, even if you do not choose an FDL protocol. Your carrier can tell you which FDL protocol to specify. The FDL Stats windows are the fourth and fifth options listed in the VT100 interface's status window Net/T1 window: 10-000 Net/T1 10-300 Line Errors ^ 10-400 FDL1 Stats >10-500 FDL2 Stats 10-600 Net Options The following display shows the contents of the FDL2 Stats window: 10-500 FDL2 Stats >Error Events... Current Period... Last 24 Hours... 00:00... v Good Luck, David Pascarella CCNP MCSE LCTE A+ Network Support Engineer SOLUServe TAC 1571 Robert J. Conlan Blvd., Suite 110 Palm Bay, FL 32905-3562 888.449.5766 800.795.2814 fax: 321.308.7986 mailto:dpascarella@solunet.com www.solunet.com -----Original Message----- From: George [mailto:kasmier@cedarville.com] Sent: Thursday, August 29, 2002 7:11 AM To: ascend-users@bungi.com Subject: [Ascend] (ASCEND) max 6000 how can I tell where the CRC errors are comming from? I have a max 6000 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ _______________________________________________ rte-ascend mailing list rte-ascend@lists.real-time.com https://mailman.real-time.com/mailman/listinfo/rte-ascend ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From DPascarella at solunet.com Thu Aug 29 11:10:40 2002 From: DPascarella at solunet.com (DPascarella@solunet.com) Date: Tue Jan 18 14:02:26 2005 Subject: [Ascend] (ASCEND) MAX 4000 and POST FAILURE (05), some help n eeded Message-ID: <719546A93D7DD511BA7800D0B7A87DF0E3B17D@trinidad.solunet.com> Hi Charly, It sounds like your bootloader has been corrupted. There is a 128k partition in flash that is used for a bootloader file. It's possible that this partition/file has become corrupted and will need to be reflashed. From karl.gaissmaier at rz.uni-ulm.de Thu Aug 29 11:18:57 2002 From: karl.gaissmaier at rz.uni-ulm.de (Karl Gaissmaier) Date: Tue Jan 18 14:02:26 2005 Subject: [Ascend] Re: (ASCEND) MAX 4000 and POST FAILURE (05), some help needed References: <001301c24f71$cc41ac70$08fbab3f@psknet.com> Message-ID: <3D6E4971.6B6D1BD2@rz.uni-ulm.de> Hi Troy, Troy Settle schrieb: > > http://www.tek-tips.com/gviewthread.cfm/lev2/8/lev3/58/pid/574/qid/289636 this describes MAX-6000 and I think the jumpers may be different for MAX-4000. Do you have any more help? Regards and thanks so long already, Charly -- Karl Gaissmaier Computing Center,University of Ulm,Germany Email:karl.gaissmaier@rz.uni-ulm.de Network Administration Tel.: ++49 731 50-22499 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From isp2 at quik.com Sun Aug 4 08:17:32 2002 From: isp2 at quik.com (John Farrell) Date: Tue Jan 18 14:02:27 2005 Subject: [Ascend] Pipeline Message-ID: <5.1.0.14.2.20020804091730.022b7e00@mail.quik.com> Hello I am hoping that any of you professionals out there might be able to assist me with a configuration issue with an Ascend Pipeline 75 ISDN router. I am currently in charge of a small office network and a specific database program that we have purchased and installed is not working correctly. The authors need PC anywhere access through our router to help diagnose and correct the issues with the database. In order to do this they have asked for me to configure the Pipeline to: Allow their public IP: 66.152.236.146 across any firewall that may be set up in the router and also forward IP request from them (66.152.236.146) to the static IP address of my router for ports 5631 and 5632 to 192.168.1.100. Although I has able to fumble my way through the initial configuration of this router I am clueless on how to accomplish this task correctly. Any assistance will be greatly appreciated Best Regards John Farrell From MPuras at solunet.com Sun Aug 11 22:10:10 2002 From: MPuras at solunet.com (MPuras@solunet.com) Date: Tue Jan 18 14:04:48 2005 Subject: [Ascend] Maximum amount of routes? Message-ID: <719546A93D7DD511BA7800D0B7A87DF0FCC2C8@trinidad.solunet.com> Hi all, Does anyone know what is the maximum amount of routes that the Max 6000/TNT can hold? Can this limit be increased by adding an additional memory (dram) card? Thanks, Mario Puras SoluNet Technical Support * Mailto: mpuras@solunet.com * Direct: (321) 309-1410 * 888.449.5766 (USA) / 888.SOLUNET (Canada) From infoeditor at hotmail.com Mon Aug 12 02:18:37 2002 From: infoeditor at hotmail.com (Babar Hameed) Date: Tue Jan 18 14:04:48 2005 Subject: [Ascend] (ASCEND) max3000 hang problem Message-ID: I have 8 max3000 (toas 9.1.0) in my setup; at peak hours when most users connect users start calling me that there browsing stops for a couple of miniutes. when i investegated the max boxes stops responding randomly I can telnet the box but it stops sending and recieving bytes for approximately five minuets then it comes back to normal. Any one has a clue. Is there a command to moniter max CPU and RAM resources? Bregds, Babar _________________________________________________________________ Join the world抯 largest e-mail service with MSN Hotmail. http://www.hotmail.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From Michael at q-crystal.com Sun Aug 11 23:01:30 2002 From: Michael at q-crystal.com (Michael Guo ) Date: Tue Jan 18 14:04:53 2005 Subject: [Ascend] (ASCEND) re: crystal resonator Message-ID: <200208120401.VAA23765@max.bungi.com> Dear Sir/Madam, Happy new year! We are glad to send you this introductory letter, hoping that it will be the prelude to mutually beneficial relations between us. We (Shenzhen crystal technology electronics co., ltd.), is a professional group producing crystal resonator, crystal oscillator and other crystal and ceramic products. We own three manufacturing factories in china mainland. All the modern production facilities and technologies are brought in from Japan and South Korea, etc. The full capacity can reach 60 million pieces per year, accompanied with quality assurance system. The main export areas include the US, Europe and Southeast Asia. Our advantage: 1. price 2. quality 3. delivery 4. service We know you a leading manufacturer in the field. I think we can supply quality-ensured and price-competitive electronics component(crystal resonator and oscillator) for your market. Please visit our web: Http://www.q-crystal.com for the detail. Of course, we can supply samples for you to approval. If you have any questions, please contact me by E-mail, fax or telephone. Looking forward to hear from you soon! Thanks Yours **************************************************** Michael Guo Marketing Manager Shenzhen Crystal Technology Electronics Co., Ltd. Fax: 86-755-83795218 Tel: 86-755-83791248 Http://www.q-crystal.com Mail: michael@q-crystal.com **************************************************** ============================邮件内容与以下文字无关============================= 中资源公司http://www.net001.net 提供域名先注册后付款;主机先开通后收费服务, 中途可退款。特惠推荐：域名+100M主机并附送5个10M企业邮箱，每年只需350元！！ 优联网络 http://www.chinamysql.com 专业提供各类虚拟主机，不满意可获退款。 强势套餐：100M主机送顶级域名，送10个10M企业油箱，加送20个二级域名，仅需318元/年！ 使用极星邮件群发，无须通过邮件服务器，直达对方邮箱，速度绝对一流！ 下载网址：http://www.lovexin.com，更多免费的超酷软件等你来下载哦！ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From ez.rodriguez at codetel.net.do Tue Aug 13 08:37:20 2002 From: ez.rodriguez at codetel.net.do (ez.rodriguez@codetel.net.do) Date: Tue Jan 18 14:04:53 2005 Subject: [Ascend] (ASCEND) Redundancy in Fasteth / Ethernet Ports on Max TNT Message-ID: <8c86201c242ce$8c1fddb0$525103c4@codetel.net> Hi, I need to know how i can have redundancy using the The card in the MAX TNT that use one Fastethernet and three Ethernet. The Idea is to use OSPF and when the main link, FE port, goes down the another port could take this routing table and take the control. So i need some help about. Thanks. Ezequiel Rodriguez E. -CCNA- Product Engineer Dep. Codetel, Verizon Co. Santo Domingo, DR Tel. 809-220-7784 Cel. 809-763-5873 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/