Hi George,

You might want to look at your FDL stats for each trunk.(see below) They
will show how many Error Events (EE) you have had in the last 24 hours and
in various increments up to 24 hours.  The FDL events are 'seen' by the MAX
and occur on the trunk itself.  You can then take this information and go to
your telco with it.  Also rule out your hardware, if possible, by swapping
ports and different RAS boxes to see if the CRC's follow the trunk or a
particular port/chassis.  All of this is assuming that you have the correct
config for your trunks and have ruled that out as well.

A Facilities Data Link (FDL) is a 4-Kbps digital link between a sender and
the telephone
company's monitors. The FDL uses Extended Superframe (ESF) framing, a
framing format
that consists of 24 consecutive frames, separated by framing bits. The
telephone company uses
an FDL to check on the quality and performance of T1 lines. It provides
information at regular
intervals to your carrier's maintenance devices. The MAX unit continues to
accumulate ESF
performance statistics in the FDL Stats windows, even if you do not choose
an FDL protocol.
Your carrier can tell you which FDL protocol to specify.

The FDL Stats windows are the fourth and fifth options listed in the VT100
interface's status
window Net/T1 window:
	10-000 Net/T1
	10-300 Line Errors ^
	10-400 FDL1 Stats
	>10-500 FDL2 Stats
	10-600 Net Options

The following display shows the contents of the FDL2 Stats window:

10-500 FDL2 Stats
>Error Events...
Current Period...
Last 24 Hours...
00:00... v

Good Luck,

David Pascarella
CCNP MCSE LCTE A+
Network Support Engineer
SOLUServe   TAC
1571 Robert J. Conlan Blvd., Suite 110
Palm Bay, FL  32905-3562
888.449.5766
800.795.2814
fax: 321.308.7986
mailto:dpascarella at solunet.com
www.solunet.com




-----Original Message-----
From: George [mailto:kasmier at cedarville.com]
Sent: Thursday, August 29, 2002 7:11 AM
To: ascend-users at bungi.com
Subject: [Ascend] (ASCEND) max 6000


how can I tell where the CRC errors are comming from?
I have a max 6000


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request at bungi.com
Archives: http://www.nexial.com/mailinglists/
_______________________________________________
rte-ascend mailing list
rte-ascend at lists.real-time.com
https://mailman.real-time.com/mailman/listinfo/rte-ascend
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request at bungi.com
Archives: http://www.nexial.com/mailinglists/