From HKruell at swd-ag.de Fri Feb 1 01:34:32 2002 From: HKruell at swd-ag.de (HKruell@swd-ag.de) Date: Tue Jan 18 14:01:38 2005 Subject: [Ascend] (ASCEND) Max TNT IP-Pools Message-ID: Hello, i tried to add new ip-pools in addition to the 1 that is working. But no way. Settings i made was : in IP-Globals: pool-base-address = [ 192.168.1.1 192.168.2.1 0.0.0.0 0.0.0.0+ assign-count = [ 50 50 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + pool-name = [ 1 IT "" "" "" "" "" "" "" "" "" "" "" "" "" "" + is this all i must do ? Everyone who dials in and is configured in NAVIS_RADIUS with : Ascend-Assign-IP-Pool = 1, or Ascend-Assign-IP-Pool = IT, gets an address from pool 1. Heribert Kruell Remote Access Management Stadtwerke duesseldorf AG Germany ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From duygu.dogmus at is.net.tr Fri Feb 1 02:19:21 2002 From: duygu.dogmus at is.net.tr (Duygu Dogmus) Date: Tue Jan 18 14:01:38 2005 Subject: [Ascend] Re: (ASCEND) Max TNT IP-Pools References: Message-ID: <3C5A4F89.7E656F91@is.net.tr> Hi, I think you should set the Ascend-Assign-IP-Pool parameter to "2" not to "IT" for the second pool defined. The pool name is only for your understanding not for radius or others. Duygu Dogmus HKruell@swd-ag.de wrote: > > Hello, > > i tried to add new ip-pools in addition to the 1 that is working. But no > way. > Settings i made was : > > in IP-Globals: > > pool-base-address = [ 192.168.1.1 192.168.2.1 0.0.0.0 0.0.0.0+ > assign-count = [ 50 50 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > + > pool-name = [ 1 IT "" "" "" "" "" "" "" "" "" "" "" "" "" "" + > > is this all i must do ? > > Everyone who dials in and is configured in NAVIS_RADIUS with : > > Ascend-Assign-IP-Pool = 1, > > or > > Ascend-Assign-IP-Pool = IT, > > gets an address from pool 1. > > Heribert Kruell > Remote Access Management > Stadtwerke duesseldorf AG > Germany > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From spanna at au.psi.net Fri Feb 1 02:35:57 2002 From: spanna at au.psi.net (Adam Spann) Date: Tue Jan 18 14:01:38 2005 Subject: [Ascend] RE: (ASCEND) Max TNT IP-Pools Message-ID: <038ACCAA87C2D31191C8009027CC66C5A941BC@SYDSERVER04> I suspect you will need to change IT to 2 I have used several different pools just using numeric references, also tnt's actually use pool 1 by default, and then over write this based on the profile. -----Original Message----- From: HKruell@swd-ag.de [mailto:HKruell@swd-ag.de] Sent: Friday, 1 February 2002 6:35 PM To: ascend-users@max.bungi.com Subject: (ASCEND) Max TNT IP-Pools Hello, i tried to add new ip-pools in addition to the 1 that is working. But no way. Settings i made was : in IP-Globals: pool-base-address = [ 192.168.1.1 192.168.2.1 0.0.0.0 0.0.0.0+ assign-count = [ 50 50 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + pool-name = [ 1 IT "" "" "" "" "" "" "" "" "" "" "" "" "" "" + is this all i must do ? Everyone who dials in and is configured in NAVIS_RADIUS with : Ascend-Assign-IP-Pool = 1, or Ascend-Assign-IP-Pool = IT, gets an address from pool 1. Heribert Kruell Remote Access Management Stadtwerke duesseldorf AG Germany ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From troy at psknet.com Fri Feb 1 11:52:39 2002 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 14:01:38 2005 Subject: [Ascend] RE: (ASCEND) Max TNT IP-Pools In-Reply-To: <038ACCAA87C2D31191C8009027CC66C5A941BC@SYDSERVER04> Message-ID: The name of the pools are completely arbitrary. Here's my current pools: pool-chaining = yes pool-base-address = [ 63.171.251.32 204.118.174.72 63.171.251.144 0.0.0.0 0.0.0+ assign-count = [ 64 152 48 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 + pool-name = [ "Pool 1" "Pool 2" "Pool 3" "" "" "" "" "" "" "" "" "" "" "" "" ""+ I would reccomend dropping the radius attribute "Ascend-Assign-IP-Pool" from your reply message. It's not needed at all unless you're doing some advanced networking. For a traditional dialup ISP, you don't need it. Good luck, -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com ** -----Original Message----- ** From: owner-ascend-users@max.bungi.com ** [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Adam Spann ** Sent: Friday, February 01, 2002 3:36 AM ** To: 'HKruell@swd-ag.de'; ascend-users@max.bungi.com ** Subject: RE: (ASCEND) Max TNT IP-Pools ** ** ** I suspect you will need to change IT to 2 ** ** I have used several different pools just using numeric references, ** ** also tnt's actually use pool 1 by default, and then over write ** this based on ** the profile. ** ** ** -----Original Message----- ** From: HKruell@swd-ag.de [mailto:HKruell@swd-ag.de] ** Sent: Friday, 1 February 2002 6:35 PM ** To: ascend-users@max.bungi.com ** Subject: (ASCEND) Max TNT IP-Pools ** ** ** Hello, ** ** i tried to add new ip-pools in addition to the 1 that is working. But no ** way. ** Settings i made was : ** ** in IP-Globals: ** ** pool-base-address = [ 192.168.1.1 192.168.2.1 0.0.0.0 0.0.0.0+ ** assign-count = [ 50 50 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ** 0 0 0 0 0 ** + ** pool-name = [ 1 IT "" "" "" "" "" "" "" "" "" "" "" "" "" "" + ** ** is this all i must do ? ** ** Everyone who dials in and is configured in NAVIS_RADIUS with : ** ** Ascend-Assign-IP-Pool = 1, ** ** or ** ** Ascend-Assign-IP-Pool = IT, ** ** gets an address from pool 1. ** ** ** Heribert Kruell ** Remote Access Management ** Stadtwerke duesseldorf AG ** Germany ** ** ++ Ascend Users Mailing List ++ ** To unsubscribe: send unsubscribe to ascend-users-request@bungi.com ** Archives: http://www.nexial.com/mailinglists/ ** ++ Ascend Users Mailing List ++ ** To unsubscribe: send unsubscribe to ascend-users-request@bungi.com ** Archives: http://www.nexial.com/mailinglists/ ** ** ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From rsrubens at terra.com.br Fri Feb 1 14:17:57 2002 From: rsrubens at terra.com.br (Rubens R. Silva) Date: Tue Jan 18 14:01:38 2005 Subject: [Ascend] Re: (ASCEND) Max TNT IP-Pools Message-ID: The (Ascend-Assign-IP-Pool) attribute accept only integer values so, my sugestion is that you change the name of your second pool to "2" and put the attribute like in this example: Ascend-Assign-IP-Pool = 2 Regards Rubens R. Silva > ---------- Mensagem original ----------- > > De : owner-ascend-users@max.bungi.com > Para : ascend-users@max.bungi.com > Cc : > Data : Fri, 1 Feb 2002 08:34:32 +0100 > Assunto : (ASCEND) Max TNT IP-Pools > > Hello, > > i tried to add new ip-pools in addition to the 1 that is working. But no > way. > Settings i made was : > > in IP-Globals: > > pool-base-address = [ 192.168.1.1 192.168.2.1 0.0.0.0 0.0.0.0+ > assign-count = [ 50 50 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > + > pool-name = [ 1 IT "" "" "" "" "" "" "" "" "" "" "" "" "" "" + > > is this all i must do ? > > Everyone who dials in and is configured in NAVIS_RADIUS with : > > Ascend-Assign-IP-Pool = 1, > > or > > Ascend-Assign-IP-Pool = IT, > > gets an address from pool 1. > > > Heribert Kruell > Remote Access Management > Stadtwerke duesseldorf AG > Germany > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users- request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From sdunkle at pennswoods.net Sun Feb 3 22:15:18 2002 From: sdunkle at pennswoods.net (Stacy J. Dunkle) Date: Tue Jan 18 14:01:39 2005 Subject: [Ascend] Pipeline 85 and NAT Message-ID: <3C5E0AD6.95D388AD@pennswoods.net> I recently got a Lucent/Ascend Pipeline 85 ISDN router. I've been able to get everything working OK on it so far, with the exception of NAT forwarding. Here's some details on my configuration: I have a static IP address through my ISP. I assigned the Pipeline it's own private IP, 192.168.100.100, and the computer it's own, 192.168.100.101, and I have everything set up correctly as far as dialing and regular internet access goes. I have a simple web server running on the computer. I'm using NAT, and have it configured for local and dest ports to 80, to the IP of the computer, 192.168.100.101. If I type my true IP into a browser, it gets nothing. If I type the routers internal IP, still nothing. The only way I can get anything is if I type in the internal IP of the computer with the web server. I've tried changing all sorts of settings, including entering my true static IP into the router, to no avail (and hosed everything quite a few times). I downloaded and installed the latest version of the on-board software, 8.0-101.0, to see if that would make a difference, (it didn't) and read over the documentation, and I still can't figure out what's keeping it from working. Anyone have any ideas or suggestions? Thanks! Stace From HKruell at swd-ag.de Mon Feb 4 00:15:52 2002 From: HKruell at swd-ag.de (HKruell@swd-ag.de) Date: Tue Jan 18 14:01:39 2005 Subject: [Ascend] Antwort: RE: (ASCEND) Max TNT IP-Pools Message-ID: Hello, if i do not use the "Ascend-Assign-IP-Pool" Attribute, how do i set wich pool to use? And another question comes up : Is there another step after configure the pools, to activate them ? thanks Heribert Kruell RemoteAccessManagement Stadtwerke Duesseldorf AG Germany ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From freize at tiscalinet.ch Mon Feb 4 03:45:27 2002 From: freize at tiscalinet.ch (freize@tiscalinet.ch) Date: Tue Jan 18 14:01:39 2005 Subject: [Ascend] =?iso-8859-1?Q?TNT=20MPP=20question?= Message-ID: <3C5741FB00000F54@mail.tiscalinet.ch> Hi, Has anybody some experience with the following: If a user connects to the TNT with one channel and he opens a second channel, What happens if this second channel is connecting to another TNT in my network when the first is full? Can I solve this issue somehow with multicast Tx for your help Florian From rishi.sumbal at fr.easynet.net Mon Feb 4 09:40:46 2002 From: rishi.sumbal at fr.easynet.net (Rishi Sumbal) Date: Tue Jan 18 14:01:39 2005 Subject: [Ascend] Re: (ASCEND) Max TNT IP-Pools Message-ID: Hello, what do you want to do exactly ? because, the assignation of IP address is not "load-balanced" between pools, so you don't really have to use Ascend-Assign-IP-Pool but pool-chaining=yes in the TNT, then when the first pool has been totally used, you will automatically use the second and so on ... Rishi ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From jb at jbacher.com Mon Feb 4 10:12:23 2002 From: jb at jbacher.com (J Bacher) Date: Tue Jan 18 14:01:39 2005 Subject: [Ascend] (ASCEND) Max 4048 - Fatal Error Message-ID: <4.2.2.20020204100712.02021610@localhost> We are seeing the following error on six 4048s -- all in different locations: FATAL ERROR: Index: 1 Load: ftk.m40 Revision: 6.1.3 Date: 12/24/2001. Time: 11:59:15 Location: b001d328 b001dac4 b001db44 b019258c b0194a5c b0072230 or FATAL ERROR: Index: 1 Load: ftk.m40 Revision: 6.1.3 Date: 06/01/2001. Time: 22:14:06 Location: b001d328 b001dac4 b001db44 b01925ac b0196434 b0078ed8 A search on index 1 error is inconclusive. Can anyone provide information regarding the location information that might shed some light on the units reloading? Tia. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From pwthoma at anc.net Mon Feb 4 10:36:05 2002 From: pwthoma at anc.net (Paul Thomas) Date: Tue Jan 18 14:01:39 2005 Subject: [Ascend] Re: (ASCEND) Max 4048 - Fatal Error In-Reply-To: <4.2.2.20020204100712.02021610@localhost> Message-ID: <5.1.0.14.2.20020204103431.00b188e8@pop3.arkansas.net> I'll agree that is a pretty generic error. I would try to get the nvram rebuilt (Diagnostic menu - fsave - nvramclear). That may solve the problem. Another option would be to upgrade the IOS (ftp.ascend.com). I've found the 7.0.4 code to be quite reliable. Paul At 10:12 AM 2/4/2002, J Bacher wrote: >We are seeing the following error on six 4048s -- all in different locations: > >FATAL ERROR: Index: 1 Load: ftk.m40 Revision: 6.1.3 > Date: 12/24/2001. Time: 11:59:15 > Location: b001d328 b001dac4 b001db44 b019258c b0194a5c b0072230 > >or > >FATAL ERROR: Index: 1 Load: ftk.m40 Revision: 6.1.3 > Date: 06/01/2001. Time: 22:14:06 > Location: b001d328 b001dac4 b001db44 b01925ac b0196434 b0078ed8 > >A search on index 1 error is inconclusive. Can anyone provide information >regarding the location information that might shed some light on the units >reloading? Tia. > >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >Archives: http://www.nexial.com/mailinglists/ > > > From MPuras at solunet.com Mon Feb 4 10:43:33 2002 From: MPuras at solunet.com (MPuras@solunet.com) Date: Tue Jan 18 14:01:39 2005 Subject: [Ascend] RE: (ASCEND) Max 4048 - Fatal Error Message-ID: <719546A93D7DD511BA7800D0B7A87DF07C15AF@trinidad.solunet.com> Hi Jan, Fatal Index 1 is almost always a hardware error. I say almost because it could be software as well. This is the GENERAL fatal error that is not real specific on what could be wrong. I would start by changing codes. If that does not work, start to see if perhaps you have a defective modem card but chances are that you will experience reboots in the near future if you have not seen them yet. Thanks, Mario Puras SoluNet Technical Support -----Original Message----- From: J Bacher [mailto:jb@jbacher.com] Sent: Monday, February 04, 2002 11:12 AM To: ascend-users@max.bungi.com Subject: (ASCEND) Max 4048 - Fatal Error We are seeing the following error on six 4048s -- all in different locations: FATAL ERROR: Index: 1 Load: ftk.m40 Revision: 6.1.3 Date: 12/24/2001. Time: 11:59:15 Location: b001d328 b001dac4 b001db44 b019258c b0194a5c b0072230 or FATAL ERROR: Index: 1 Load: ftk.m40 Revision: 6.1.3 Date: 06/01/2001. Time: 22:14:06 Location: b001d328 b001dac4 b001db44 b01925ac b0196434 b0078ed8 A search on index 1 error is inconclusive. Can anyone provide information regarding the location information that might shed some light on the units reloading? Tia. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From rsrubens at terra.com.br Mon Feb 4 14:06:45 2002 From: rsrubens at terra.com.br (Rubens R. Silva) Date: Tue Jan 18 14:01:39 2005 Subject: [Ascend] Re: Antwort: RE: (ASCEND) Max TNT IP-Pools Message-ID: If I understood well, you want that some users gets IP Address from one pool, and another users gets IP Address from another pool... If this is really that you want, the instructions that I told you will work. Regards, Rubens R. Silva > ---------- Mensagem original ----------- > > De : owner-ascend-users@max.bungi.com > Para : ascend-users@max.bungi.com > Cc : > Data : Mon, 4 Feb 2002 07:15:52 +0100 > Assunto : Antwort: RE: (ASCEND) Max TNT IP-Pools > > > Hello, > > if i do not use the "Ascend-Assign-IP-Pool" Attribute, how do i set wich > pool to use? > > And another question comes up : Is there another step after configure the > pools, to activate them ? > > > > thanks > Heribert Kruell > RemoteAccessManagement > Stadtwerke Duesseldorf AG > Germany > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users- request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From everett at pgweb.com Mon Feb 4 14:35:44 2002 From: everett at pgweb.com (shawn everett) Date: Tue Jan 18 14:01:39 2005 Subject: [Ascend] (ASCEND) Power-On Self Test FAILURE (05) Message-ID: I have a max 4000 that boots up and works for a few minutes before generating the above message. A search on google and deja for this message show nothing. I have tried using nvramclear to reset the unit but the problem persists. Any advice or suggestions would be apreciated. Shawn ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From joro at fastlane.pl Tue Feb 5 11:24:09 2002 From: joro at fastlane.pl (Joe Rothstein) Date: Tue Jan 18 14:01:40 2005 Subject: [Ascend] (ASCEND) Password recovery for a DSLPipe Message-ID: I'm hoping someone on this mailing list can help. I recently bought a used DSLPipe for a remote connection to my office. The problem is that there is a password already set on the unit, and I can't access the configuration not knowing the password. Any help would be very much appreciated. Joe -- Joseph Rothstein ul. Sebastiana 22/21 31-049 Krakow Poland (012) 429-5426 cell: 0504 875646 e-mail: ziutek@mac.com AOL IM: Ziutek444 homepage: www.geocities.com/Jozek444 homepage.mac.com/ziutek ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From erikp at nu2u.net Tue Feb 5 16:06:20 2002 From: erikp at nu2u.net (Erik Peterson) Date: Tue Jan 18 14:01:40 2005 Subject: [Ascend] (ASCEND) WTB: Acsend DSLMX 20 and DSL TNT with SDSL line cards Message-ID: <07f601c1ae91$579d44a0$90885842@new2u.net> WTB: ASCEND DSL TNT and DSLMX 20 with SDSL line cards. Thanks, Erik Peterson Millennium Solutions Group INC (916) 671-2001 x242 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From cschelin at hq.nasa.gov Wed Feb 6 07:10:45 2002 From: cschelin at hq.nasa.gov (Carl Schelin) Date: Tue Jan 18 14:01:40 2005 Subject: [Ascend] (ASCEND) Summary: Filter question In-Reply-To: <0201291411370Q.21015@unixgod.hq.nasa.gov> References: <200201290645.WAA13098@max.bungi.com> <0201291411370Q.21015@unixgod.hq.nasa.gov> Message-ID: <0202060810452U.21015@unixgod.hq.nasa.gov> Original question: How to restrict administrative access to the Ascends. No response from the list so I went with our conclusions. Thanks, Carl -- Ah. So-called "sysadmins" who cannot be bothered to skim an O'Reilly book, let alone read an RFC. People who react to the comment, "check the source" with an expression suggesting I _really_ said "Shove a weasel up your ***." -- crawford++ Carl Schelin (BOFH, Badlife, DNRC, Sun CSA/CNA, Cisco CNA/CNP, '02 FLSTC) finger cschelin@x500.hq.nasa.gov for phone and address ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From luisveiga at zipmail.com.br Wed Feb 6 08:08:13 2002 From: luisveiga at zipmail.com.br (luisveiga@zipmail.com.br) Date: Tue Jan 18 14:01:40 2005 Subject: [Ascend] (ASCEND) =?iso-8859-1?Q?Auditing=20admin=20commands?= Message-ID: <3C5E8ED900004734@www.zipmail.com.br> Hi all, I'm behind the curve and need to know what is required to enable auditing mode on MAXTNT. I need to log all commands by admin or any local user created on the box. Regards, Luis Veiga ------------------------------------------ Use o melhor sistema de busca da Internet Radar UOL - http://www.radaruol.com.br ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From Carlos.Morillo at CottonStates.com Wed Feb 6 09:21:16 2002 From: Carlos.Morillo at CottonStates.com (Carlos.Morillo@CottonStates.com) Date: Tue Jan 18 14:01:40 2005 Subject: [Ascend] (ASCEND) Pipeline 50 as a bridge ? Message-ID: We have been deploying NetScreen 5-XP Firewalls to our remote locations and linking them to the Internet using DSL Ethernet Modems. But we have a few locations that only support ISDN and was wondering if is possible to put the firewall behind the Pipeline50 and use it to just establish the communication to a local ISP, letting the Firewall pick-up an IP address using either DHCP or PPoE... Can something like this be done? -- Carlos Morillo ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From mailmover at nemexcorp.com Sun Feb 3 11:47:26 2002 From: mailmover at nemexcorp.com (mailmover@nemexcorp.com) Date: Tue Jan 18 14:01:40 2005 Subject: [Ascend] (ASCEND) test Message-ID: ghdjghjmgjhg sdlfgjhsdlhg sdlgsldfg lsfhglkjshdflkgjshdlgijhawelijthakjl sfhlkjashdfkjlashdl kjfyapwerhkjawe hfiupasgd fi;asugdfpuiasge;kfj sadgfl sapiufgwealjkgf ualsyhdgfp suyadghasg dofysgadl ;jfisahdglfg safyg aslkfg lshadgfu yaosg fljasgdl asd oufysg dalfjksdaghuifgsapuyfgsbfg puyawgef ;awhefkj asbdfcaspufgrejk.bfas pduyfgw eia;gf a.kjsfbauipweg f/kajsbdfs;aiug vera;wufjaksbcasuif b/jakrebviuashgv uasdbvkjasbdvi;ua dg;uviasdbhvjka sbdvausi;dvbkjrbviuas;dbv a.rkjba;ciusvbrkj.bv aui;sbevu dsglksdfjglk; sjdflgjs ;lj gl;ksfjg;lsdjglkjsdf;ghsierhguirhgusidh vufdhs giuhdsfuighs iduhg iushrg isuhdrhvruihgs iudfhgiushdf giushdiu ghdsiufhgs idfhgusdhg isfdjsgkjhdfgkjsdhf gkjshdf gkjshdg kjshdfgseriuhgskdfhgiusrhskgjhdsiug rhksjhdfguishejkghdufgh skerjhgsuidhgkjshdurhgksdhg skuhdfkjghr sofdjhgk shfksadufhr4aegknbs ghiuhybsdfhg jkshdfg krenskjhgifudshykljrewh gsdfulihgkjrhlsdjhf sduyhgrlsbdfl yugsearljfbshdluifhren gkjs ghsienrgsjkghiusd grsuihg kjslhdg lsdfghus dfifksh glsdfiuhg sdjgnb lsjdhgi usdhlkjg hf;lighsd fghsd kjgh;sdjhgk;jsdhf g;sjdhfguiserhgs iudhv iudsfhg iudfhg isudfhgiush giusfdhgiusdhfg iusdh gusidhfg iusdhg iusdh giushd giusohrdgijas odpgjpsodfa gopajrlkt zoihfdgj; aehfiposdht iaowph zvdsfnk;jt grejacpszpafjreoi;fhasdp;ohbnf raiubcpi ;uashtbr;uyvzafdvhgrjkebguiapvcjkrbnfcusdif gawjek fgboauisf breuciazs dgfjkrbeciu azSdh ga;rejbf aPSIUfg ghdjghjmgjhg sdlfgjhsdlhg sdlgsldfg lsfhglkjshdflkgjshdlgijhawelijthakjl sfhlkjashdfkjlashdl kjfyapwerhkjawe hfiupasgd fi;asugdfpuiasge;kfj sadgfl sapiufgwealjkgf ualsyhdgfp suyadghasg dofysgadl ;jfisahdglfg safyg aslkfg lshadgfu yaosg fljasgdl asd oufysg dalfjksdaghuifgsapuyfgsbfg puyawgef ;awhefkj asbdfcaspufgrejk.bfas pduyfgw eia;gf a.kjsfbauipweg f/kajsbdfs;aiug vera;wufjaksbcasuif b/jakrebviuashgv uasdbvkjasbdvi;ua dg;uviasdbhvjka sbdvausi;dvbkjrbviuas;dbv a.rkjba;ciusvbrkj.bv aui;sbevu dsglksdfjglk; sjdflgjs ;lj gl;ksfjg;lsdjglkjsdf;ghsierhguirhgusidh vufdhs giuhdsfuighs iduhg iushrg isuhdrhvruihgs iudfhgiushdf giushdiu ghdsiufhgs idfhgusdhg isfdjsgkjhdfgkjsdhf gkjshdf gkjshdg kjshdfgseriuhgskdfhgiusrhskgjhdsiug rhksjhdfguishejkghdufgh skerjhgsuidhgkjshdurhgksdhg skuhdfkjghr sofdjhgk shfksadufhr4aegknbs ghiuhybsdfhg jkshdfg krenskjhgifudshykljrewh gsdfulihgkjrhlsdjhf sduyhgrlsbdfl yugsearljfbshdluifhren gkjs ghsienrgsjkghiusd grsuihg kjslhdg lsdfghus dfifksh glsdfiuhg sdjgnb lsjdhgi usdhlkjg hf;lighsd fghsd kjgh;sdjhgk;jsdhf g;sjdhfguiserhgs iudhv iudsfhg iudfhg isudfhgiush giusfdhgiusdhfg iusdh gusidhfg iusdhg iusdh giushd giusohrdgijas odpgjpsodfa gopajrlkt zoihfdgj; aehfiposdht iaowph zvdsfnk;jt grejacpszpafjreoi;fhasdp;ohbnf raiubcpi ;uashtbr;uyvzafdvhgrjkebguiapvcjkrbnfcusdif gawjek fgboauisf breuciazs dgfjkrbeciu azSdh ga;rejbf aPSIUfgghdjghjmgjhg sdlfgjhsdlhg sdlgsldfg lsfhglkjshdflkgjshdlgijhawelijthakjl sfhlkjashdfkjlashdl kjfyapwerhkjawe hfiupasgd fi;asugdfpuiasge;kfj sadgfl sapiufgwealjkgf ualsyhdgfp suyadghasg dofysgadl ;jfisahdglfg safyg aslkfg lshadgfu yaosg fljasgdl asd oufysg dalfjksdaghuifgsapuyfgsbfg puyawgef ;awhefkj asbdfcaspufgrejk.bfas pduyfgw eia;gf a.kjsfbauipweg f/kajsbdfs;aiug vera;wufjaksbcasuif b/jakrebviuashgv uasdbvkjasbdvi;ua dg;uviasdbhvjka sbdvausi;dvbkjrbviuas;dbv a.rkjba;ciusvbrkj.bv aui;sbevu dsglksdfjglk; sjdflgjs ;lj gl;ksfjg;lsdjglkjsdf;ghsierhguirhgusidh vufdhs giuhdsfuighs iduhg iushrg isuhdrhvruihgs iudfhgiushdf giushdiu ghdsiufhgs idfhgusdhg isfdjsgkjhdfgkjsdhf gkjshdf gkjshdg kjshdfgseriuhgskdfhgiusrhskgjhdsiug rhksjhdfguishejkghdufgh skerjhgsuidhgkjshdurhgksdhg skuhdfkjghr sofdjhgk shfksadufhr4aegknbs ghiuhybsdfhg jkshdfg krenskjhgifudshykljrewh gsdfulihgkjrhlsdjhf sduyhgrlsbdfl yugsearljfbshdluifhren gkjs ghsienrgsjkghiusd grsuihg kjslhdg lsdfghus dfifksh glsdfiuhg sdjgnb lsjdhgi usdhlkjg hf;lighsd fghsd kjgh;sdjhgk;jsdhf g;sjdhfguiserhgs iudhv iudsfhg iudfhg isudfhgiush giusfdhgiusdhfg iusdh gusidhfg iusdhg iusdh giushd giusohrdgijas odpgjpsodfa gopajrlkt zoihfdgj; aehfiposdht iaowph zvdsfnk;jt grejacpszpafjreoi;fhasdp;ohbnf raiubcpi ;uashtbr;uyvzafdvhgrjkebguiapvcjkrbnfcusdif gawjek fgboauisf breuciazs dgfjkrbeciu azSdh ga;rejbf aPSIUfgghdjghjmgjhg sdlfgjhsdlhg sdlgsldfg lsfhglkjshdflkgjshdlgijhawelijthakjl sfhlkjashdfkjlashdl kjfyapwerhkjawe hfiupasgd fi;asugdfpuiasge;kfj sadgfl sapiufgwealjkgf ualsyhdgfp suyadghasg dofysgadl ;jfisahdglfg safyg aslkfg lshadgfu yaosg fljasgdl asd oufysg dalfjksdaghuifgsapuyfgsbfg puyawgef ;awhefkj asbdfcaspufgrejk.bfas pduyfgw eia;gf a.kjsfbauipweg f/kajsbdfs;aiug vera;wufjaksbcasuif b/jakrebviuashgv uasdbvkjasbdvi;ua dg;uviasdbhvjka sbdvausi;dvbkjrbviuas;dbv a.rkjba;ciusvbrkj.bv aui;sbevu dsglksdfjglk; sjdflgjs ;lj gl;ksfjg;lsdjglkjsdf;ghsierhguirhgusidh vufdhs giuhdsfuighs iduhg iushrg isuhdrhvruihgs iudfhgiushdf giushdiu ghdsiufhgs idfhgusdhg isfdjsgkjhdfgkjsdhf gkjshdf gkjshdg kjshdfgseriuhgskdfhgiusrhskgjhdsiug rhksjhdfguishejkghdufgh skerjhgsuidhgkjshdurhgksdhg skuhdfkjghr sofdjhgk shfksadufhr4aegknbs ghiuhybsdfhg jkshdfg krenskjhgifudshykljrewh gsdfulihgkjrhlsdjhf sduyhgrlsbdfl yugsearljfbshdluifhren gkjs ghsienrgsjkghiusd grsuihg kjslhdg lsdfghus dfifksh glsdfiuhg sdjgnb lsjdhgi usdhlkjg hf;lighsd fghsd kjgh;sdjhgk;jsdhf g;sjdhfguiserhgs iudhv iudsfhg iudfhg isudfhgiush giusfdhgiusdhfg iusdh gusidhfg iusdhg iusdh giushd giusohrdgijas odpgjpsodfa gopajrlkt zoihfdgj; aehfiposdht iaowph zvdsfnk;jt grejacpszpafjreoi;fhasdp;ohbnf raiubcpi ;uashtbr;uyvzafdvhgrjkebguiapvcjkrbnfcusdif gawjek fgboauisf breuciazs dgfjkrbeciu azSdh ga;rejbf aPSIUfgghdjghjmgjhg sdlfgjhsdlhg sdlgsldfg lsfhglkjshdflkgjshdlgijhawelijthakjl sfhlkjashdfkjlashdl kjfyapwerhkjawe hfiupasgd fi;asugdfpuiasge;kfj sadgfl sapiufgwealjkgf ualsyhdgfp suyadghasg dofysgadl ;jfisahdglfg safyg aslkfg lshadgfu yaosg fljasgdl asd oufysg dalfjksdaghuifgsapuyfgsbfg puyawgef ;awhefkj asbdfcaspufgrejk.bfas pduyfgw eia;gf a.kjsfbauipweg f/kajsbdfs;aiug vera;wufjaksbcasuif b/jakrebviuashgv uasdbvkjasbdvi;ua dg;uviasdbhvjka sbdvausi;dvbkjrbviuas;dbv a.rkjba;ciusvbrkj.bv aui;sbevu dsglksdfjglk; sjdflgjs ;lj gl;ksfjg;lsdjglkjsdf;ghsierhguirhgusidh vufdhs giuhdsfuighs iduhg iushrg isuhdrhvruihgs iudfhgiushdf giushdiu ghdsiufhgs idfhgusdhg isfdjsgkjhdfgkjsdhf gkjshdf gkjshdg kjshdfgseriuhgskdfhgiusrhskgjhdsiug rhksjhdfguishejkghdufgh skerjhgsuidhgkjshdurhgksdhg skuhdfkjghr sofdjhgk shfksadufhr4aegknbs ghiuhybsdfhg jkshdfg krenskjhgifudshykljrewh gsdfulihgkjrhlsdjhf sduyhgrlsbdfl yugsearljfbshdluifhren gkjs ghsienrgsjkghiusd grsuihg kjslhdg lsdfghus dfifksh glsdfiuhg sdjgnb lsjdhgi usdhlkjg hf;lighsd fghsd kjgh;sdjhgk;jsdhf g;sjdhfguiserhgs iudhv iudsfhg iudfhg isudfhgiush giusfdhgiusdhfg iusdh gusidhfg iusdhg iusdh giushd giusohrdgijas odpgjpsodfa gopajrlkt zoihfdgj; aehfiposdht iaowph zvdsfnk;jt grejacpszpafjreoi;fhasdp;ohbnf raiubcpi ;uashtbr;uyvzafdvhgrjkebguiapvcjkrbnfcusdif gawjek fgboauisf breuciazs dgfjkrbeciu azSdh ga;rejbf aPSIUfgghdjghjmgjhg sdlfgjhsdlhg sdlgsldfg lsfhglkjshdflkgjshdlgijhawelijthakjl sfhlkjashdfkjlashdl kjfyapwerhkjawe hfiupasgd fi;asugdfpuiasge;kfj sadgfl sapiufgwealjkgf ualsyhdgfp suyadghasg dofysgadl ;jfisahdglfg safyg aslkfg lshadgfu yaosg fljasgdl asd oufysg dalfjksdaghuifgsapuyfgsbfg puyawgef ;awhefkj asbdfcaspufgrejk.bfas pduyfgw eia;gf a.kjsfbauipweg f/kajsbdfs;aiug vera;wufjaksbcasuif b/jakrebviuashgv uasdbvkjasbdvi;ua dg;uviasdbhvjka sbdvausi;dvbkjrbviuas;dbv a.rkjba;ciusvbrkj.bv aui;sbevu dsglksdfjglk; sjdflgjs ;lj gl;ksfjg;lsdjglkjsdf;ghsierhguirhgusidh vufdhs giuhdsfuighs iduhg iushrg isuhdrhvruihgs iudfhgiushdf giushdiu ghdsiufhgs idfhgusdhg isfdjsgkjhdfgkjsdhf gkjshdf gkjshdg kjshdfgseriuhgskdfhgiusrhskgjhdsiug rhksjhdfguishejkghdufgh skerjhgsuidhgkjshdurhgksdhg skuhdfkjghr sofdjhgk shfksadufhr4aegknbs ghiuhybsdfhg jkshdfg krenskjhgifudshykljrewh gsdfulihgkjrhlsdjhf sduyhgrlsbdfl yugsearljfbshdluifhren gkjs ghsienrgsjkghiusd grsuihg kjslhdg lsdfghus dfifksh glsdfiuhg sdjgnb lsjdhgi usdhlkjg hf;lighsd fghsd kjgh;sdjhgk;jsdhf g;sjdhfguiserhgs iudhv iudsfhg iudfhg isudfhgiush giusfdhgiusdhfg iusdh gusidhfg iusdhg iusdh giushd giusohrdgijas odpgjpsodfa gopajrlkt zoihfdgj; aehfiposdht iaowph zvdsfnk;jt grejacpszpafjreoi;fhasdp;ohbnf raiubcpi ;uashtbr;uyvzafdvhgrjkebguiapvcjkrbnfcusdif gawjek fgboauisf breuciazs dgfjkrbeciu azSdh ga;rejbf aPSIUfgghdjghjmgjhg sdlfgjhsdlhg sdlgsldfg lsfhglkjshdflkgjshdlgijhawelijthakjl sfhlkjashdfkjlashdl kjfyapwerhkjawe hfiupasgd fi;asugdfpuiasge;kfj sadgfl sapiufgwealjkgf ualsyhdgfp suyadghasg dofysgadl ;jfisahdglfg safyg aslkfg lshadgfu yaosg fljasgdl asd oufysg dalfjksdaghuifgsapuyfgsbfg puyawgef ;awhefkj asbdfcaspufgrejk.bfas pduyfgw eia;gf a.kjsfbauipweg f/kajsbdfs;aiug vera;wufjaksbcasuif b/jakrebviuashgv uasdbvkjasbdvi;ua dg;uviasdbhvjka sbdvausi;dvbkjrbviuas;dbv a.rkjba;ciusvbrkj.bv aui;sbevu dsglksdfjglk; sjdflgjs ;lj gl;ksfjg;lsdjglkjsdf;ghsierhguirhgusidh vufdhs giuhdsfuighs iduhg iushrg isuhdrhvruihgs iudfhgiushdf giushdiu ghdsiufhgs idfhgusdhg isfdjsgkjhdfgkjsdhf gkjshdf gkjshdg kjshdfgseriuhgskdfhgiusrhskgjhdsiug rhksjhdfguishejkghdufgh skerjhgsuidhgkjshdurhgksdhg skuhdfkjghr sofdjhgk shfksadufhr4aegknbs ghiuhybsdfhg jkshdfg krenskjhgifudshykljrewh gsdfulihgkjrhlsdjhf sduyhgrlsbdfl yugsearljfbshdluifhren gkjs ghsienrgsjkghiusd grsuihg kjslhdg lsdfghus dfifksh glsdfiuhg sdjgnb lsjdhgi usdhlkjg hf;lighsd fghsd kjgh;sdjhgk;jsdhf g;sjdhfguiserhgs iudhv iudsfhg iudfhg isudfhgiush giusfdhgiusdhfg iusdh gusidhfg iusdhg iusdh giushd giusohrdgijas odpgjpsodfa gopajrlkt zoihfdgj; aehfiposdht iaowph zvdsfnk;jt grejacpszpafjreoi;fhasdp;ohbnf raiubcpi ;uashtbr;uyvzafdvhgrjkebguiapvcjkrbnfcusdif gawjek fgboauisf breuciazs dgfjkrbeciu azSdh ga;rejbf aPSIUfgghdjghjmgjhg sdlfgjhsdlhg sdlgsldfg lsfhglkjshdflkgjshdlgijhawelijthakjl sfhlkjashdfkjlashdl kjfyapwerhkjawe hfiupasgd fi;asugdfpuiasge;kfj sadgfl sapiufgwealjkgf ualsyhdgfp suyadghasg dofysgadl ;jfisahdglfg safyg aslkfg lshadgfu yaosg fljasgdl asd oufysg dalfjksdaghuifgsapuyfgsbfg puyawgef ;awhefkj asbdfcaspufgrejk.bfas pduyfgw eia;gf a.kjsfbauipweg f/kajsbdfs;aiug vera;wufjaksbcasuif b/jakrebviuashgv uasdbvkjasbdvi;ua dg;uviasdbhvjka sbdvausi;dvbkjrbviuas;dbv a.rkjba;ciusvbrkj.bv aui;sbevu dsglksdfjglk; sjdflgjs ;lj gl;ksfjg;lsdjglkjsdf;ghsierhguirhgusidh vufdhs giuhdsfuighs iduhg iushrg isuhdrhvruihgs iudfhgiushdf giushdiu ghdsiufhgs idfhgusdhg isfdjsgkjhdfgkjsdhf gkjshdf gkjshdg kjshdfgseriuhgskdfhgiusrhskgjhdsiug rhksjhdfguishejkghdufgh skerjhgsuidhgkjshdurhgksdhg skuhdfkjghr sofdjhgk shfksadufhr4aegknbs ghiuhybsdfhg jkshdfg krenskjhgifudshykljrewh gsdfulihgkjrhlsdjhf sduyhgrlsbdfl yugsearljfbshdluifhren gkjs ghsienrgsjkghiusd grsuihg kjslhdg lsdfghus dfifksh glsdfiuhg sdjgnb lsjdhgi usdhlkjg hf;lighsd fghsd kjgh;sdjhgk;jsdhf g;sjdhfguiserhgs iudhv iudsfhg iudfhg isudfhgiush giusfdhgiusdhfg iusdh gusidhfg iusdhg iusdh giushd giusohrdgijas odpgjpsodfa gopajrlkt zoihfdgj; aehfiposdht iaowph zvdsfnk;jt grejacpszpafjreoi;fhasdp;ohbnf raiubcpi ;uashtbr;uyvzafdvhgrjkebguiapvcjkrbnfcusdif gawjek fgboauisf breuciazs dgfjkrbeciu azSdh ga;rejbf aPSIUfgghdjghjmgjhg sdlfgjhsdlhg sdlgsldfg lsfhglkjshdflkgjshdlgijhawelijthakjl sfhlkjashdfkjlashdl kjfyapwerhkjawe hfiupasgd fi;asugdfpuiasge;kfj sadgfl sapiufgwealjkgf ualsyhdgfp suyadghasg dofysgadl ;jfisahdglfg safyg aslkfg lshadgfu yaosg fljasgdl asd oufysg dalfjksdaghuifgsapuyfgsbfg puyawgef ;awhefkj asbdfcaspufgrejk.bfas pduyfgw eia;gf a.kjsfbauipweg f/kajsbdfs;aiug vera;wufjaksbcasuif b/jakrebviuashgv uasdbvkjasbdvi;ua dg;uviasdbhvjka sbdvausi;dvbkjrbviuas;dbv a.rkjba;ciusvbrkj.bv aui;sbevu dsglksdfjglk; sjdflgjs ;lj gl;ksfjg;lsdjglkjsdf;ghsierhguirhgusidh vufdhs giuhdsfuighs iduhg iushrg isuhdrhvruihgs iudfhgiushdf giushdiu ghdsiufhgs idfhgusdhg isfdjsgkjhdfgkjsdhf gkjshdf gkjshdg kjshdfgseriuhgskdfhgiusrhskgjhdsiug rhksjhdfguishejkghdufgh skerjhgsuidhgkjshdurhgksdhg skuhdfkjghr sofdjhgk shfksadufhr4aegknbs ghiuhybsdfhg jkshdfg krenskjhgifudshykljrewh gsdfulihgkjrhlsdjhf sduyhgrlsbdfl yugsearljfbshdluifhren gkjs ghsienrgsjkghiusd grsuihg kjslhdg lsdfghus dfifksh glsdfiuhg sdjgnb lsjdhgi usdhlkjg hf;lighsd fghsd kjgh;sdjhgk;jsdhf g;sjdhfguiserhgs iudhv iudsfhg iudfhg isudfhgiush giusfdhgiusdhfg iusdh gusidhfg iusdhg iusdh giushd giusohrdgijas odpgjpsodfa gopajrlkt zoihfdgj; aehfiposdht iaowph zvdsfnk;jt grejacpszpafjreoi;fhasdp;ohbnf raiubcpi ;uashtbr;uyvzafdvhgrjkebguiapvcjkrbnfcusdif gawjek fgboauisf breuciazs dgfjkrbeciu azSdh ga;rejbf aPSIUfg -------------- next part -------------- An HTML attachment was scrubbed... URL: http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020203/04332635/attachment.htm From Holger.Steppke at team4m.de Wed Feb 6 15:49:19 2002 From: Holger.Steppke at team4m.de (Holger Steppke) Date: Tue Jan 18 14:01:40 2005 Subject: [Ascend] TNT MPP question In-Reply-To: <3C5741FB00000F54@mail.tiscalinet.ch> Message-ID: Hi, for channel bundling over multiple TNTs you must look into the Stacking feature. The rest ist up to you to read the manual its easy ;) Just one comment: Not every version and/or card does stacking togther. Bye Holger >-----Original Message----- >From: rte-ascend-admin@lists.real-time.com >[mailto:rte-ascend-admin@lists.real-time.com]On Behalf Of >freize@tiscalinet.ch >Sent: Monday, February 04, 2002 10:45 AM >To: rte-ascend@lists.real-time.com >Subject: [Ascend] TNT MPP question > > >Hi, > >Has anybody some experience with the following: > >If a user connects to the TNT with one channel and he opens a >second channel, >What happens if this second channel is connecting to another TNT >in my network >when the first is full? Can I solve this issue somehow with multicast > >Tx for your help > >Florian > > > > > > > > >_______________________________________________ >rte-ascend mailing list >rte-ascend@lists.real-time.com >https://mailman.real-time.com/mailman/listinfo/rte-ascend > From jfu at primustel.ca Thu Feb 7 13:06:40 2002 From: jfu at primustel.ca (jerry) Date: Tue Jan 18 14:01:40 2005 Subject: [Ascend] Mibs for Ascend and Portmasters References: <200202041815.g14IFiS05878@sprite.real-time.com> Message-ID: <00c801c1b00a$92fbedb0$0501a8c0@cr1067249a> I am looking for Mibs for Ascend and Portmasters ... i have this Specific oids 1.3.6.1.4.1.529 6 16 i don't know the description of these oids! ----- Original Message ----- From: To: Sent: Monday, February 04, 2002 1:15 PM Subject: rte-ascend digest, Vol 1 #546 - 9 msgs > Send rte-ascend mailing list submissions to > rte-ascend@lists.real-time.com > > To subscribe or unsubscribe via the World Wide Web, visit > https://mailman.real-time.com/mailman/listinfo/rte-ascend > or, via email, send a message with subject or body 'help' to > rte-ascend-request@lists.real-time.com > > You can reach the person managing the list at > rte-ascend-admin@lists.real-time.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of rte-ascend digest..." > > > Today's Topics: > > 1. Re: (ASCEND) MAX 4000, VLSM and OSPF (Peter Lalor) > 2. Pipeline 85 and NAT (Stacy J. Dunkle) > 3. Antwort: RE: (ASCEND) Max TNT IP-Pools (HKruell@swd-ag.de) > 4. =?iso-8859-1?Q?TNT=20MPP=20question?= (freize@tiscalinet.ch) > 5. (ASCEND) Need to buy 20 Lucent MAX 800 ASAP! (Carlos.Morillo@CottonStates.com) > 6. Re: (ASCEND) Max TNT IP-Pools (Rishi Sumbal) > 7. (ASCEND) Max 4048 - Fatal Error (J Bacher) > 8. Re: (ASCEND) Max 4048 - Fatal Error (Paul Thomas) > 9. RE: (ASCEND) Max 4048 - Fatal Error (MPuras@solunet.com) > > --__--__-- > > Message: 1 > Date: Wed, 23 Jan 2002 09:34:45 -0800 > To: ascend-users@max.bungi.com > From: Peter Lalor > Subject: [Ascend] Re: (ASCEND) MAX 4000, VLSM and OSPF > > >From: Chris Cook > > > >Does the MAX support VLSM on the dial-up pools when using OSPF? > > Yes. > > >I am > >trying to designate a pool of addresses from a random block and when I > >try to enable Pool Summary in the WAN Options > > > >Message #215 > > > >Pool Summary Error > >address/netmask > >alignment error > > (Re)read the manual section on Pool Summary carefully. Your pools > need to be network-aligned. > -- > > Peter Lalor > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > --__--__-- > > Message: 2 > Date: Sun, 03 Feb 2002 23:15:18 -0500 > From: "Stacy J. Dunkle" > Organization: Pennswoods.net > To: rte-ascend@lists.real-time.com > Subject: [Ascend] Pipeline 85 and NAT > > I recently got a Lucent/Ascend Pipeline 85 ISDN router. I've been able > to get everything working OK on it so far, with the exception of NAT > forwarding. > > Here's some details on my configuration: I have a static IP address > through my ISP. I assigned the Pipeline it's own private IP, > 192.168.100.100, and the computer it's own, 192.168.100.101, and I have > everything set up correctly as far as dialing and regular internet > access goes. I have a simple web server running on the computer. I'm > using NAT, and have it configured for local and dest ports to 80, to the > IP of the computer, 192.168.100.101. > > If I type my true IP into a browser, it gets nothing. If I type the > routers internal IP, still nothing. The only way I can get anything is > if I type in the internal IP of the computer with the web server. > > I've tried changing all sorts of settings, including entering my true > static IP into the router, to no avail (and hosed everything quite a few > times). I downloaded and installed the latest version of the on-board > software, 8.0-101.0, to see if that would make a difference, (it didn't) > and read over the documentation, and I still can't figure out what's > keeping it from working. > > Anyone have any ideas or suggestions? > > Thanks! > Stace > > --__--__-- > > Message: 3 > From: HKruell@swd-ag.de > To: ascend-users@max.bungi.com > Date: Mon, 4 Feb 2002 07:15:52 +0100 > Subject: [Ascend] Antwort: RE: (ASCEND) Max TNT IP-Pools > > > Hello, > > if i do not use the "Ascend-Assign-IP-Pool" Attribute, how do i set wich > pool to use? > > And another question comes up : Is there another step after configure the > pools, to activate them ? > > > > thanks > Heribert Kruell > RemoteAccessManagement > Stadtwerke Duesseldorf AG > Germany > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > --__--__-- > > Message: 4 > Date: Mon, 4 Feb 2002 10:45:27 +0100 > From: freize@tiscalinet.ch > To: rte-ascend@lists.real-time.com > Subject: [Ascend] =?iso-8859-1?Q?TNT=20MPP=20question?= > > Hi, > > Has anybody some experience with the following: > > If a user connects to the TNT with one channel and he opens a second channel, > What happens if this second channel is connecting to another TNT in my network > when the first is full? Can I solve this issue somehow with multicast > > Tx for your help > > Florian > > > > > > > > > > --__--__-- > > Message: 5 > From: Carlos.Morillo@CottonStates.com > To: ascend-users@max.bungi.com > Date: Thu, 24 Jan 2002 10:44:33 -0500 > Subject: [Ascend] (ASCEND) Need to buy 20 Lucent MAX 800 ASAP! > > Please, contact me with price and availability. > > Thanks > > -- > Carlos Morillo > Atlanta, GA > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > --__--__-- > > Message: 6 > From: Rishi Sumbal > To: "'ascend-users@max.bungi.com'" > Date: Mon, 4 Feb 2002 16:40:46 +0100 > Subject: [Ascend] Re: (ASCEND) Max TNT IP-Pools > > Hello, > > what do you want to do exactly ? > because, the assignation of IP address is not "load-balanced" between pools, > so you don't really have to use > Ascend-Assign-IP-Pool but pool-chaining=yes in the TNT, then when the first > pool has been totally used, you will automatically use the second and so on > ... > > Rishi > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > --__--__-- > > Message: 7 > Date: Mon, 04 Feb 2002 10:12:23 -0600 > To: ascend-users@max.bungi.com > From: J Bacher > Subject: [Ascend] (ASCEND) Max 4048 - Fatal Error > > We are seeing the following error on six 4048s -- all in different locations: > > FATAL ERROR: Index: 1 Load: ftk.m40 Revision: 6.1.3 > Date: 12/24/2001. Time: 11:59:15 > Location: b001d328 b001dac4 b001db44 b019258c b0194a5c b0072230 > > or > > FATAL ERROR: Index: 1 Load: ftk.m40 Revision: 6.1.3 > Date: 06/01/2001. Time: 22:14:06 > Location: b001d328 b001dac4 b001db44 b01925ac b0196434 b0078ed8 > > A search on index 1 error is inconclusive. Can anyone provide information > regarding the location information that might shed some light on the units > reloading? Tia. > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > --__--__-- > > Message: 8 > Date: Mon, 04 Feb 2002 10:36:05 -0600 > To: J Bacher , ascend-users@max.bungi.com > From: Paul Thomas > Subject: [Ascend] Re: (ASCEND) Max 4048 - Fatal Error > > --=======37F75F50======= > Content-Type: text/plain; x-avg-checked=avg-ok-7028551B; charset=us-ascii; format=flowed > Content-Transfer-Encoding: 8bit > > I'll agree that is a pretty generic error. > > I would try to get the nvram rebuilt (Diagnostic menu - fsave - > nvramclear). That may solve the problem. > > Another option would be to upgrade the IOS (ftp.ascend.com). I've found > the 7.0.4 code to be quite reliable. > > Paul > > At 10:12 AM 2/4/2002, J Bacher wrote: > > >We are seeing the following error on six 4048s -- all in different locations: > > > >FATAL ERROR: Index: 1 Load: ftk.m40 Revision: 6.1.3 > > Date: 12/24/2001. Time: 11:59:15 > > Location: b001d328 b001dac4 b001db44 b019258c b0194a5c b0072230 > > > >or > > > >FATAL ERROR: Index: 1 Load: ftk.m40 Revision: 6.1.3 > > Date: 06/01/2001. Time: 22:14:06 > > Location: b001d328 b001dac4 b001db44 b01925ac b0196434 b0078ed8 > > > >A search on index 1 error is inconclusive. Can anyone provide information > >regarding the location information that might shed some light on the units > >reloading? Tia. > > > >++ Ascend Users Mailing List ++ > >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > >Archives: http://www.nexial.com/mailinglists/ > > > > > > > > --=======37F75F50=======-- > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > --__--__-- > > Message: 9 > From: MPuras@solunet.com > To: jb@jbacher.com, ascend-users@max.bungi.com > Date: Mon, 4 Feb 2002 11:43:33 -0500 > Subject: [Ascend] RE: (ASCEND) Max 4048 - Fatal Error > > Hi Jan, > > Fatal Index 1 is almost always a hardware error. I say almost because it > could be software as well. This is the GENERAL fatal error that is not real > specific on what could be wrong. I would start by changing codes. If that > does not work, start to see if perhaps you have a defective modem card but > chances are that you will experience reboots in the near future if you have > not seen them yet. > > > > Thanks, > > > Mario Puras > SoluNet Technical Support > > > > > > -----Original Message----- > From: J Bacher [mailto:jb@jbacher.com] > Sent: Monday, February 04, 2002 11:12 AM > To: ascend-users@max.bungi.com > Subject: (ASCEND) Max 4048 - Fatal Error > > > We are seeing the following error on six 4048s -- all in different > locations: > > FATAL ERROR: Index: 1 Load: ftk.m40 Revision: 6.1.3 > Date: 12/24/2001. Time: 11:59:15 > Location: b001d328 b001dac4 b001db44 b019258c b0194a5c b0072230 > > or > > FATAL ERROR: Index: 1 Load: ftk.m40 Revision: 6.1.3 > Date: 06/01/2001. Time: 22:14:06 > Location: b001d328 b001dac4 b001db44 b01925ac b0196434 b0078ed8 > > A search on index 1 error is inconclusive. Can anyone provide information > regarding the location information that might shed some light on the units > reloading? Tia. > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > > --__--__-- > > _______________________________________________ > rte-ascend mailing list > rte-ascend@lists.real-time.com > https://mailman.real-time.com/mailman/listinfo/rte-ascend > > > End of rte-ascend Digest From sdunkle at pennswoods.net Sun Feb 3 21:41:33 2002 From: sdunkle at pennswoods.net (Staceman) Date: Tue Jan 18 14:01:40 2005 Subject: [Ascend] Pipeline 85 Message-ID: <3C5E02ED.644F2098@pennswoods.net> I recently got a Lucent/Ascend Pipeline 85 ISDN router. I've been able to get everything working OK on it so far, with the exception of NAT forwarding. Here's some details on my configuration: I have a static IP address through my ISP. I assigned the Pipeline it's own private IP, 192.168.100.100, and the computer it's own, 192.168.100.101, and I have everything set up correctly as far as dialing and regular internet access goes. I have a simple web server running on the computer. I'm using NAT, and have it configured for local and dest ports to 80, to the IP of the computer, 192.168.100.101. If I type my true IP into a browser, it gets nothing. If I type the routers internal IP, still nothing. The only way I can get anything is if I type in the internal IP of the computer with the web server. I've tried changing all sorts of settings, including entering my true static IP into the router, to no avail (and hosed everything quite a few times). I downloaded and installed the latest version of the on-board software, 8.0-101.0, to see if that would make a difference, and read over the documentation, and I still can't figure out what's going on. Anyone have any ideas or suggestions? Thanks! Stace From sdunkle at pennswoods.net Thu Feb 7 18:10:55 2002 From: sdunkle at pennswoods.net (Stacy J. Dunkle) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] Pipeline 85 References: <3C5E02ED.644F2098@pennswoods.net> Message-ID: <3C63178F.E47CFA01@pennswoods.net> Disregard that message... I got it all figured out! :) Staceman wrote: > > I recently got a Lucent/Ascend Pipeline 85 ISDN router. I've been able > to get everything working OK on it so far, with the exception of NAT > forwarding. > > Here's some details on my configuration: I have a static IP address > through my ISP. I assigned the Pipeline it's own private IP, > 192.168.100.100, and the computer it's own, 192.168.100.101, and I have > everything set up correctly as far as dialing and regular internet > access goes. I have a simple web server running on the computer. I'm > using NAT, and have it configured for local and dest ports to 80, to the > IP of the computer, 192.168.100.101. > > If I type my true IP into a browser, it gets nothing. If I type the > routers internal IP, still nothing. The only way I can get anything is > if I type in the internal IP of the computer with the web server. > > I've tried changing all sorts of settings, including entering my true > static IP into the router, to no avail (and hosed everything quite a few > times). I downloaded and installed the latest version of the on-board > software, 8.0-101.0, to see if that would make a difference, and read > over the documentation, and I still can't figure out what's going on. > > Anyone have any ideas or suggestions? > > Thanks! > Stace > _______________________________________________ > rte-ascend mailing list > rte-ascend@lists.real-time.com > https://mailman.real-time.com/mailman/listinfo/rte-ascend From vbranyik at piopc.com Thu Feb 7 19:24:04 2002 From: vbranyik at piopc.com (Vilmos Branyik) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] Ascend 4048 Question Message-ID: Hello All! I just put in another 4048 with 48 56k modems. I thought I had set the configuration up exactly like the first which has run flawlessly since the day installed, but I must not have. Here is the problem.... Users can authenticate but cannot go past the router. They can only ping address local to it. I'm using software version 7.0.4 Can anyone tell me where to look? Thanks. V. Branyik From simon at igrin.co.nz Thu Feb 7 20:03:27 2002 From: simon at igrin.co.nz (Simon Byrnand) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] Ascend 4048 Question In-Reply-To: Message-ID: <3.0.6.32.20020208150327.00b01100@mail.igrin.co.nz> At 18:24 7/02/02 -0700, Vilmos Branyik wrote: >Hello All! > >I just put in another 4048 with 48 56k modems. > >I thought I had set the configuration up exactly like the first which has >run flawlessly since the day installed, but I must not have. > >Here is the problem.... > >Users can authenticate but cannot go past the router. They can only ping >address local to it. > >I'm using software version 7.0.4 > >Can anyone tell me where to look? When you say they can only ping addresses "local" to the router, do you mean addresses on the subnet allocated to the ethernet that the 4048 is on ? In that case its very likely just a routing problem - specifically, you probably don't have a route or routes on your main upstream router (or your "default" router for the subnet) for the ip address pool you're allocating on the new MAX box. Without knowing more about your network topology it's hard to say for sure, but it certainly sounds like a routing problem.... Regards, Simon From vbranyik at piopc.com Thu Feb 7 20:31:15 2002 From: vbranyik at piopc.com (Vilmos Branyik) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] Ascend 4048 Question Message-ID: Simon, Thanks for the answer but I just found the solution and it wasn't a routing problem. I didn't Have Proxy Mode set to Active in the Session Options under Mod Config (90-900) Thanks very much for helping. Vilmos -----Original Message----- From: Simon Byrnand [mailto:simon@igrin.co.nz] Sent: Thursday, February 07, 2002 7:03 PM To: Vilmos Branyik; rte-ascend@lists.real-time.com Subject: Re: [Ascend] Ascend 4048 Question At 18:24 7/02/02 -0700, Vilmos Branyik wrote: >Hello All! > >I just put in another 4048 with 48 56k modems. > >I thought I had set the configuration up exactly like the first which has >run flawlessly since the day installed, but I must not have. > >Here is the problem.... > >Users can authenticate but cannot go past the router. They can only ping >address local to it. > >I'm using software version 7.0.4 > >Can anyone tell me where to look? When you say they can only ping addresses "local" to the router, do you mean addresses on the subnet allocated to the ethernet that the 4048 is on ? In that case its very likely just a routing problem - specifically, you probably don't have a route or routes on your main upstream router (or your "default" router for the subnet) for the ip address pool you're allocating on the new MAX box. Without knowing more about your network topology it's hard to say for sure, but it certainly sounds like a routing problem.... Regards, Simon _______________________________________________ rte-ascend mailing list rte-ascend@lists.real-time.com https://mailman.real-time.com/mailman/listinfo/rte-ascend From MPuras at solunet.com Fri Feb 8 09:24:48 2002 From: MPuras at solunet.com (MPuras@solunet.com) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] (ASCEND) Multilink PPP on TNT Message-ID: <719546A93D7DD511BA7800D0B7A87DF07C15FD@trinidad.solunet.com> Has anyone done ML-PPP on TNT's before? Is it even supported on the TNT's? I know ML-FR is but not sure about ML-PPP. Thanks, Mario Puras SoluNet Technical Support Customer Support Engineer -----Original Message----- From: shawn everett [mailto:everett@pgweb.com] Sent: Monday, February 04, 2002 3:36 PM To: ascend-users@max.bungi.com Subject: (ASCEND) Power-On Self Test FAILURE (05) I have a max 4000 that boots up and works for a few minutes before generating the above message. A search on google and deja for this message show nothing. I have tried using nvramclear to reset the unit but the problem persists. Any advice or suggestions would be apreciated. Shawn ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From DPascarella at solunet.com Fri Feb 8 10:23:35 2002 From: DPascarella at solunet.com (DPascarella@solunet.com) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] RE: (ASCEND) Multilink PPP on TNT Message-ID: <719546A93D7DD511BA7800D0B7A87DF074EB9A@trinidad.solunet.com> Three protocols are supported on the FrameLine card: Frame Relay, HDLC, and PPP. The FrameLine card does not support MP or MPP. You can have only one nailed group per T1 port. - David -----Original Message----- From: MPuras@solunet.com [mailto:MPuras@solunet.com] Sent: Friday, February 08, 2002 10:25 AM To: ascend-users@max.bungi.com Subject: (ASCEND) Multilink PPP on TNT Has anyone done ML-PPP on TNT's before? Is it even supported on the TNT's? I know ML-FR is but not sure about ML-PPP. Thanks, Mario Puras SoluNet Technical Support Customer Support Engineer -----Original Message----- From: shawn everett [mailto:everett@pgweb.com] Sent: Monday, February 04, 2002 3:36 PM To: ascend-users@max.bungi.com Subject: (ASCEND) Power-On Self Test FAILURE (05) I have a max 4000 that boots up and works for a few minutes before generating the above message. A search on google and deja for this message show nothing. I have tried using nvramclear to reset the unit but the problem persists. Any advice or suggestions would be apreciated. Shawn ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From bizsfi at yaoo.com Sat Feb 9 07:37:23 2002 From: bizsfi at yaoo.com (HOME-BIZ) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] (ASCEND) ascend-users, DO YOU ADVERTISE?! Message-ID: <1237149-22002269133723795@yaoo.com> ascend-users, When was the last time you advertised and got paid? While you are thinking about the answer, let me tell you about a site where entrepreneurs like you get paid each time they advertise their own business offers. You might think this is crazy, but you must check it out to believe. Wait a minute, it gets crazier!!! You will even receive a $150 BONUS each time you advertise! You are also paid upto $1950 each time you advertise depending on the edition you participate in! One good thing: YOU DON'T HAVE TO ADVERTISE OR PROMOTE THIS PROGRAM TO GET PAID (Although the owner advises members to promote in some ways). Well if you don't he still pays you because there is no way he will know if you don't. This is because everyone promotes the same URL-no special personal website assigned. I am only promoting this program because I would love to see you succeed in your business. And if you finally decide to join this program, please don't let him know I told you all this. This is what someone said about this program, "I recommend this program to all small business owners (affiliates). It is a great way to promote all your affiliate programs for less and earn a good commission doing so." Here is what someone else said, "I have nothing to lose; if those who see my other affiliate programs and offers (which I promote on this site) don't buy them, I know I will still get paid for advertising them here." The program is designed to give you the POWER and FLEXIBILITY to make as much money as your heart desires! If you are interested in more information, click here now: bizsfi@yahoo.com?subject=More_Info_About_The_Oppotunity_Pls! and I will forward it to you asap. Thanks for the time you have spent reading this mail. I really appreciate it. Have a wonderful day! ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From acid at dg.net.ua Sat Feb 9 15:35:47 2002 From: acid at dg.net.ua (Michael Vasilenko) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] (ASCEND) Max 3000 dial-in setup help Message-ID: Hello I've got one Max3000, can somebody give me an advice in configuring such device for PPP dial-in access: w/o auth & auth with RADIUS? Recently, I broke something in config and can't fix it, help please. -- Michael Vasilenko ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From everett at pgweb.com Sat Feb 9 20:39:54 2002 From: everett at pgweb.com (shawn everett) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] (ASCEND) Max 4004 reboot problems Message-ID: We have a Max4004 that is rebooted itself randomly. What things can I check/monitor to narrow down the problem? Shawn ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From rsrubens at terra.com.br Sun Feb 10 12:55:44 2002 From: rsrubens at terra.com.br (Rubens R. Silva) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] Re: (ASCEND) Max 4004 reboot problems Message-ID: Try to take off some modem card, and turn on the equipment again. Maybe some card attached to the equipment is causing the problem. If this action don't solve the problem, i think that can be some power supply problem. Regards Rubens R. Silva > ---------- Mensagem original ----------- > > De : owner-ascend-users@max.bungi.com > Para : ascend-users@max.bungi.com > Cc : > Data : Sat, 9 Feb 2002 18:39:54 -0800 (PST) > Assunto : (ASCEND) Max 4004 reboot problems > > We have a Max4004 that is rebooted itself randomly. What things can I > check/monitor to narrow down the problem? > > Shawn > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users- request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From bogus@does.not.exist.com Sun Feb 10 19:00:52 2002 From: bogus@does.not.exist.com (Lenox Meridian) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] (ASCEND) Get Quicken 2001. Only $19.95!! Message-ID: PM20007:00:52 PM An HTML attachment was scrubbed... URL: http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020210/d57b5013/attachment.html From andrewm at asnet.co.nz Mon Feb 11 01:13:31 2002 From: andrewm at asnet.co.nz (Andrew Maclean) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] (ASCEND) Max4004 reboots Message-ID: Hi shawn look in the debug area Ctrl d d type fat this shows the fatal debug history there is a number asociated with the resets that decodes to the reason for the reset what does it say Rgds Andrew ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From everett at pgweb.com Mon Feb 11 11:02:47 2002 From: everett at pgweb.com (shawn everett) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] Re: (ASCEND) Max4004 reboots In-Reply-To: Message-ID: The fatal-history log only shows Index 100: SYSTEM IS UP messages Here is a quick sampling of our log file showing aproximate reboot times: Feb 10 08:31:24 max4000 Can't read debug profile Feb 10 11:19:58 max4000 Can't read debug profile Feb 10 11:54:17 max4000 Can't read debug profile Feb 10 12:24:03 max4000 Can't read debug profile Feb 10 12:53:02 max4000 Can't read debug profile Feb 10 13:12:23 max4000 Can't read debug profile Feb 10 13:32:32 max4000 Can't read debug profile Feb 10 14:07:26 max4000 Can't read debug profile Feb 10 16:02:01 max4000 Can't read debug profile Feb 10 16:36:23 max4000 Can't read debug profile Feb 10 17:06:16 max4000 Can't read debug profile Feb 10 17:34:50 max4000 Can't read debug profile Feb 10 18:04:58 max4000 Can't read debug profile Feb 10 18:37:39 max4000 Can't read debug profile Feb 10 19:17:06 max4000 Can't read debug profile Feb 10 21:53:00 max4000 Can't read debug profile Feb 10 22:29:07 max4000 Can't read debug profile Feb 10 23:00:52 max4000 Can't read debug profile Feb 10 23:32:24 max4000 Can't read debug profile Feb 11 00:10:56 max4000 Can't read debug profile Feb 11 03:23:50 max4000 Can't read debug profile Feb 11 04:04:42 max4000 Can't read debug profile Feb 11 04:40:22 max4000 Can't read debug profile Is it possible that this could be caused by a telco problem? Shawn ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From efyosklw at yahoo.com Mon Feb 11 12:54:44 2002 From: efyosklw at yahoo.com (Sally) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] (ASCEND) We'll Help You Pay Your Bills!......... 3838 Message-ID: <200202111854.g1BIsix24513@web.inside-2000.de> Below is the result of your feedback form. It was submitted by Sally (efyosklw@yahoo.com) on Monday, February 11, 2002 at 19:54:44 --------------------------------------------------------------------------- body: CONSOLIDATE YOUR BILLS into One Low Monthly Payment! GET OUT OF DEBT NOW! We can help you Payoff your Bills & Reduce Your Debt Quickly Click the Link Below & Complete the Brief Information Form A Consultant will Contact you to explain the program and answer any questions that you may have. ** To Qualify Must have Minimum $2500 Debt Not including House, Car or Boat. Click Here "http://www.dataactivity.com/debt1/" ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From 056G501PE at email.com Tue Feb 12 12:29:24 2002 From: 056G501PE at email.com (056G501PE@email.com) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] (ASCEND) A Retirement Opportunity for You Message-ID: Dear Internet Marketer, You have probably received a lot of e-mails telling you how you can "GET RICH WITH OUR SYSTEM!" Well, this program is NOT a "get-rich-scheme" or scam of any kind. It does take a little effort, but the rewards are great! Unfortunately, I wasted a lot of time and money with several programs that did not work. I am EXCITED about THIS ONE! If you will take a few minutes to look at this program, you will not be sorry. The difference is that with this program everyone helps one another by means of an on line message board. No question is left unanswered. It is a real community effort by motivated people who realize that for them to succeed EVERYONE must succeed. The validity and SUCCESS of this program has been documented on Netional T.V. If you can follow the simple instructions, it will change your life! ALL INVOLVED WILL PROFIT! http://www.dreammakernetwork.com/?id=11778 Get ALL the FREE details NOW! Send any e-mail to: franke@workingforme.com In Success, Frank ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From hsteppke at eu.uu.net Tue Feb 12 14:04:52 2002 From: hsteppke at eu.uu.net (Holger Steppke) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] (ASCEND) Watch out on CERT ! In-Reply-To: Message-ID: Lucent ist also affected http://www.cert.org/advisories/CA-2002-03.html ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From everett at pgweb.com Tue Feb 12 17:38:07 2002 From: everett at pgweb.com (shawn everett) Date: Tue Jan 18 14:01:41 2005 Subject: [Ascend] Still Unresolved: Re: (ASCEND) Max4004 reboots (fwd) Message-ID: Sorry for the reposting but no one responded to my last message. :) Shawn ---------- Forwarded message ---------- Date: Mon, 11 Feb 2002 09:02:47 -0800 (PST) From: shawn everett To: ascend-users@max.bungi.com Subject: Re: (ASCEND) Max4004 reboots The fatal-history log only shows Index 100: SYSTEM IS UP messages Here is a quick sampling of our log file showing aproximate reboot times: Feb 10 08:31:24 max4000 Can't read debug profile Feb 10 11:19:58 max4000 Can't read debug profile Feb 10 11:54:17 max4000 Can't read debug profile Feb 10 12:24:03 max4000 Can't read debug profile Feb 10 12:53:02 max4000 Can't read debug profile Feb 10 13:12:23 max4000 Can't read debug profile Feb 10 13:32:32 max4000 Can't read debug profile Feb 10 14:07:26 max4000 Can't read debug profile Feb 10 16:02:01 max4000 Can't read debug profile Feb 10 16:36:23 max4000 Can't read debug profile Feb 10 17:06:16 max4000 Can't read debug profile Feb 10 17:34:50 max4000 Can't read debug profile Feb 10 18:04:58 max4000 Can't read debug profile Feb 10 18:37:39 max4000 Can't read debug profile Feb 10 19:17:06 max4000 Can't read debug profile Feb 10 21:53:00 max4000 Can't read debug profile Feb 10 22:29:07 max4000 Can't read debug profile Feb 10 23:00:52 max4000 Can't read debug profile Feb 10 23:32:24 max4000 Can't read debug profile Feb 11 00:10:56 max4000 Can't read debug profile Feb 11 03:23:50 max4000 Can't read debug profile Feb 11 04:04:42 max4000 Can't read debug profile Feb 11 04:40:22 max4000 Can't read debug profile Is it possible that this could be caused by a telco problem? Shawn ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From HKruell at swd-ag.de Wed Feb 13 01:12:43 2002 From: HKruell at swd-ag.de (HKruell@swd-ag.de) Date: Tue Jan 18 14:01:42 2005 Subject: [Ascend] Antwort: (ASCEND) Multilink PPP on TNT Message-ID: Helo, ML-PPP with MAX-TNT is no problem. You can allow it global for all user or special only for one or some over internal profile or over RADIUS-profiles. maybe in Acend-Radius : Framed-Protocol = MP, Heribert Kruell RemoteAccessmanagement Stadtwerke Duesseldorf AG Germany ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From boland at carmel.diva.nl Wed Feb 13 03:05:57 2002 From: boland at carmel.diva.nl (Michiel Boland) Date: Tue Jan 18 14:01:42 2005 Subject: [Ascend] (ASCEND) Reconstructing a SecureConnect firewall Message-ID: Hi. Is it possible to reconstruct a SecureConnect firewall in human-readable form based on router configuration? I have saved a Pipeline config to a tftp server, but the firewall info (the lines that start with 'fwdata=') does not make any sense. Cheers Michiel -- Michiel Boland Digital Valley Internet Professionals Plantsoen 17, Wageningen, The Netherlands Phone: +31 317 465555, Fax: +31 317 460276 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From robg at sportsline.com Wed Feb 13 12:13:20 2002 From: robg at sportsline.com (Robert Geller) Date: Tue Jan 18 14:01:42 2005 Subject: [Ascend] (ASCEND) question about call blocking on T1s Message-ID: <5.1.0.14.2.20020213130853.040970d0@mail.sportsline.com> Group, Is it possible to allow/disallow calls to certain T1s on a MAX 6048. IE: All users can dial a local number T1 and only certain users can dial an 800 number T1 I plan on using radius auth, and Im not sure if radius can do this. Anyone have this same situation? I think I can come up with a workaround on this, however I dont want to re-invent the wheel or spend too much time on this if the MAX has a mechanism or solution for this. Thanks in advance. -Rob ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From simon at igrin.co.nz Wed Feb 13 16:22:58 2002 From: simon at igrin.co.nz (Simon Byrnand) Date: Tue Jan 18 14:01:42 2005 Subject: [Ascend] (ASCEND) A Retirement Opportunity for You In-Reply-To: Message-ID: <3.0.6.32.20020214112258.00af5630@mail.igrin.co.nz> At 12:29 12/02/02 PM, 056G501PE@email.com wrote: > >Dear Internet Marketer, [snip] Just wondering, is there a moderator for this list ? Or would it be possible to change it to list member posting only ? The amount of spam that gets forwarded through this one list exceeds the total amount of spam I receive on 8 other mailing lists + personal mail, which is a bit rediculous, and it doesn't seem like anyone is doing anything about it :-( Regards, Simon From bobba43dy at yahoo.com Thu Feb 14 12:28:19 2002 From: bobba43dy at yahoo.com (bobba43dy@yahoo.com) Date: Tue Jan 18 14:01:42 2005 Subject: [Ascend] (ASCEND) watch all the channels you want !!! KIM Message-ID: <00007e6e4dd7$000042c9$000058e5@mx1.mail.yahoo.com> Newest Universial Cable Descrambler Box: Ranger 5000 *** Watch ALL channels your local cable company offer. *** Fully Tested and Compatible with 98% of US cable network. *** 90 days money back guarantee !!! http://www.xfileformularz.net/Products20002/electrical/ ------------------------------------------------------------------------------------ To be remove from farther mailing, replay to this message. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From david at morrilton.net Thu Feb 14 06:12:46 2002 From: david at morrilton.net (David Qualls) Date: Tue Jan 18 14:01:42 2005 Subject: [Ascend] (ASCEND) Max 4048 Answer Problems Message-ID: I have a max 4048 configured exactly like my 2 other max 4048's, but when I try to call it all I get is solid tone, it does not try and negotiate a handshake. This is probabally some little setting that I have overlooked. If anybody has any insight to theos problem let me know Please. it is running 6.0.8 software David ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From pwthoma at anc.net Thu Feb 14 08:53:07 2002 From: pwthoma at anc.net (Paul Thomas) Date: Tue Jan 18 14:01:42 2005 Subject: [Ascend] Re: (ASCEND) Max 4048 Answer Problems In-Reply-To: Message-ID: <5.1.0.14.2.20020214085056.02d08b88@pop3.arkansas.net> I'd start off by upgrading all your maxen to 7.0.4 or 7.0.26 if your brave. To make sure the configs are the same use TFTP to get the file to a PC from a known working max, change important stuff there, then upload to the new max. Simple way to make sure you don't miss anything. If I had to guess what the problem was I would say that you have the wrong slot set for the modem. If it's a pri set all the slots to 0 in the T1 Config screen. If it's a digital trunk (channelized T1) then set them all to 3. Paul From Dale.Foster at chron.com Fri Feb 15 11:04:04 2002 From: Dale.Foster at chron.com (Foster, Dale) Date: Tue Jan 18 14:01:42 2005 Subject: [Ascend] (ASCEND) Use pipe to replace terminal adapter Message-ID: <901D241E5C0AD511BEEB00600845C2DD06E0C8@boffice4> Hi: I have a 3ComImpaqIQ terminal adapter I use to connect to my isp. Its a ISDN modem so I figured I could just use a Pipe50 to replace the 3com. I put the dial #, MyName, and Send PW, parameter in the pipe and manually dial and am able to connecto to the ISP for about 20 sec. then the connection terminates. While its connected, I cant connect to the internet or anything. Im not sure how this is supposed to work or if you can even do it. Since it is Dialup ISDN, I dont have a static IP so I guess the IP should be assigned buy the ISP. Any input will help ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From david at morrilton.net Fri Feb 15 18:27:07 2002 From: david at morrilton.net (David Qualls) Date: Tue Jan 18 14:01:42 2005 Subject: [Ascend] Max 4048 Problems Message-ID: <009601c1b680$adb64fc0$6601a8c0@p5d6o1> My users can log on, authenticate to an authentication server on a different network, and pop the e-mail from an e-mail server from a different network, but They cannot get out to the net. Does the fact that my auth and e-mail servers are on different networks that may be causing this problem?? I am out of Ideas David -------------- next part -------------- An HTML attachment was scrubbed... URL: http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020215/386e6bb5/attachment.htm From ccook at tcworks.net Sat Feb 16 10:09:15 2002 From: ccook at tcworks.net (Chris Cook) Date: Tue Jan 18 14:01:42 2005 Subject: [Ascend] (ASCEND) Pipeline 75, 130 as RAS? Message-ID: <3C6E842B.341252C6@tcworks.net> Is it possible to dial into a Pipeline 75 or 130 directly, with no modem hooked up to the POTS jack or is the unit lacking the DSPs that would make this possible? -- Chris o----< ccook@tcworks.net >------------------------------------o |Chris Cook - Admin |TCWORKS.NET - http://www.tcworks.net | |The Computer Works ISP |FreeBSD - http://www.freebsd.org | o-------------------------------------------------------------o ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From boland at carmel.diva.nl Sat Feb 16 11:41:10 2002 From: boland at carmel.diva.nl (Michiel Boland) Date: Tue Jan 18 14:01:42 2005 Subject: [Ascend] Re: (ASCEND) Pipeline 75, 130 as RAS? In-Reply-To: <3C6E842B.341252C6@tcworks.net> Message-ID: > Is it possible to dial into a Pipeline 75 or 130 directly, with no modem > hooked up to the POTS jack or is the unit lacking the DSPs that would > make this possible? I don't think you can do that. The pipeline is a router, not a modem. You can make digital calls to a pipeline though. Cheers Michiel -- Michiel Boland Digital Valley Internet Professionals Plantsoen 17, Wageningen, The Netherlands Phone: +31 317 465555, Fax: +31 317 460276 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From rsrubens at terra.com.br Sat Feb 16 15:11:42 2002 From: rsrubens at terra.com.br (Rubens Rodrigues da Silva) Date: Tue Jan 18 14:01:42 2005 Subject: [Ascend] (ASCEND) Load Balancing Message-ID: <001b01c1b72e$8b5581e0$c8ddb1c8@LocalHost> Does MAX6000 or Terminator supports Load Balancing like a Cisco Router? If the answer is no, how can I do something similiar to make balance between two links using unchanilized E1? PS.: I am using different subnets in each E1. Thanks. BRGDS Rubens R. Silva ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From ahakim at link.net Sun Feb 17 14:10:05 2002 From: ahakim at link.net (Ahmad EL-Hakim) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] Re: (ASCEND) Pipeline 75, 130 as RAS? Message-ID: If you mean ISDN RAS, the answer is yes. Also you can use it for analog but you will not know on which analog port the call is coming (not recommended). Ahmad EL-Hakim From ahakim at link.net Sun Feb 17 14:17:32 2002 From: ahakim at link.net (Ahmad EL-Hakim) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] RE: (ASCEND) Load Balancing Message-ID: 1st option is to use RIP dynamic routing between the 2 sites with option "Ethernet>Mod Conf>RIP Trigger= yes" in order to send only updates for changes. Ahmad EL-Hakim From James at superbug.demon.co.uk Sun Feb 17 18:28:44 2002 From: James at superbug.demon.co.uk (James Courtier-Dutton) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] RE: (ASCEND) Load Balancing In-Reply-To: <001b01c1b72e$8b5581e0$c8ddb1c8@LocalHost> Message-ID: I am not sure if the Lucent MAX6000 or Lucent Terminator supports Load Balancing, but the Lucent Access Point 300 range does, and they support unchannelized E1. http://www.lucent.com/products/solution/0,,CTID+2012-STID+10419-SOID+1218-LO CL+1,00.html Cheers James > -----Original Message----- > From: owner-ascend-users@max.bungi.com > [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Rubens Rodrigues > da Silva > Sent: 16 February 2002 21:12 > To: ascend-users@max.bungi.com > Subject: (ASCEND) Load Balancing > > > Does MAX6000 or Terminator supports Load Balancing like a Cisco Router? > If the answer is no, how can I do something similiar to make > balance between > two links using unchanilized E1? > PS.: I am using different subnets in each E1. > > Thanks. > > BRGDS > > Rubens R. Silva > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From HKruell at swd-ag.de Mon Feb 18 01:33:18 2002 From: HKruell at swd-ag.de (HKruell@swd-ag.de) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] (ASCEND) MAX-TNT Callback and Channelbundling Message-ID: Hello, we use windows clients wich dial into some MAX-TNT and gets authenticated via RADIUS. Now my company wants to allow Channelbundling but with callback. Has anyone configured this before does anyone how to do this? thanks in before Heribert Kruell RemoteAccessManagement Stadtwerke Duesseldorf AG Germany ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From me2u4379 at yahoo.com Mon Feb 18 06:11:36 2002 From: me2u4379 at yahoo.com (me2u4379@yahoo.com) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] (no subject) Message-ID: ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From sean at northrock.bm Mon Feb 18 08:49:14 2002 From: sean at northrock.bm (Sean Watkins) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] (ASCEND) Disconnect code 120 Message-ID: Anyone know what this one is for? Sean ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From rsrubens at terra.com.br Mon Feb 18 08:53:54 2002 From: rsrubens at terra.com.br (Rubens R. Silva) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] RE: (ASCEND) Load Balancing Message-ID: Ok James, Thank you for the answer and thanks for everyone that tried to help me with that doubt. BRGDS Rubens R. Silva > ---------- Mensagem original ----------- > > De : owner-ascend-users@max.bungi.com > Para : "Rubens Rodrigues da Silva" , > Cc : > Data : Mon, 18 Feb 2002 00:28:44 -0000 > Assunto : RE: (ASCEND) Load Balancing > > I am not sure if the Lucent MAX6000 or Lucent Terminator supports Load > Balancing, but the Lucent Access Point 300 range does, and they support > unchannelized E1. > http://www.lucent.com/products/solution/0,,CTID+2012-STID+10419- SOID+1218-LO > CL+1,00.html > > Cheers > James > > > > -----Original Message----- > > From: owner-ascend-users@max.bungi.com > > [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Rubens Rodrigues > > da Silva > > Sent: 16 February 2002 21:12 > > To: ascend-users@max.bungi.com > > Subject: (ASCEND) Load Balancing > > > > > > Does MAX6000 or Terminator supports Load Balancing like a Cisco Router? > > If the answer is no, how can I do something similiar to make > > balance between > > two links using unchanilized E1? > > PS.: I am using different subnets in each E1. > > > > Thanks. > > > > BRGDS > > > > Rubens R. Silva > > > > ++ Ascend Users Mailing List ++ > > To unsubscribe: send unsubscribe to ascend-users- request@bungi.com > > Archives: http://www.nexial.com/mailinglists/ > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users- request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From tom at rydrcom.com Mon Feb 18 09:46:50 2002 From: tom at rydrcom.com (Tom Ryder) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] WTB-Memory Message-ID: Want To Buy MEM-TNT-SP-FLASH-8 Tom Ryder RYDER Communications, Inc. Wide Area Networking Solutions 35B Wilson Drive Sparta, NJ 07871-3427 Tel. 973-940-7350 / 1-877-RYDRCOM x222 FAX. 973-940-7355 / 1-877-RYDRFAX tom@rydrcom.com www.rydrcom.com From James at superbug.demon.co.uk Mon Feb 18 09:27:36 2002 From: James at superbug.demon.co.uk (James Courtier-Dutton) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] RE: (ASCEND) Disconnect code 120 In-Reply-To: Message-ID: http://www.lucent.com -> Customer Support -> General Access(No support contract needed) -> Documentation -> RAS/RAC section:APX 8000 -> Technical Notes -> Call Disconnect and Progress Code List That has all the Disconnect and Progress Codes. Cheers James > -----Original Message----- > From: owner-ascend-users@max.bungi.com > [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Sean Watkins > Sent: 18 February 2002 14:49 > To: ascend-users@max.bungi.com > Subject: (ASCEND) Disconnect code 120 > > > Anyone know what this one is for? > > Sean > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From sean at northrock.bm Mon Feb 18 09:36:08 2002 From: sean at northrock.bm (Sean Watkins) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] RE: (ASCEND) Disconnect code 120 Message-ID: No I know what it means - Protocol unsupported - but what exactly is unsupported? Sean > -----Original Message----- > From: James Courtier-Dutton [mailto:James@superbug.demon.co.uk] > Sent: Monday, February 18, 2002 11:28 AM > To: Sean Watkins; ascend-users@max.bungi.com > Subject: RE: (ASCEND) Disconnect code 120 > > > http://www.lucent.com -> Customer Support -> General Access(No support > contract needed) -> Documentation -> RAS/RAC section:APX 8000 > -> Technical > Notes -> Call Disconnect and Progress Code List > > That has all the Disconnect and Progress Codes. > > Cheers > James > > > > -----Original Message----- > > From: owner-ascend-users@max.bungi.com > > [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Sean Watkins > > Sent: 18 February 2002 14:49 > > To: ascend-users@max.bungi.com > > Subject: (ASCEND) Disconnect code 120 > > > > > > Anyone know what this one is for? > > > > Sean > > > > ++ Ascend Users Mailing List ++ > > To unsubscribe: send unsubscribe to > ascend-users-request@bungi.com > > Archives: http://www.nexial.com/mailinglists/ > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From pniebuhr at lssdata.com Mon Feb 18 10:16:13 2002 From: pniebuhr at lssdata.com (Paul Niebuhr) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] Max 800 MBID only goes to 38 Message-ID: <200202181616.g1IGGES29232@sprite.real-time.com> When looking at syslog for a Max 800, I see the MBID values increase to 38 and then reset to 1. This is making it very difficult to track calls. Is there a way to increase the maximum value for MBID? or are there any alternatives? Thanks, Paul Niebuhr, Computer Scientist LSS Data Systems 6423 City West Parkway, Eden Prairie, MN 55344 952.941.1000 From natecars at real-time.com Mon Feb 18 10:22:55 2002 From: natecars at real-time.com (Nate Carlson) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] Re: (ASCEND) Pipeline 75, 130 as RAS? In-Reply-To: <3C6E842B.341252C6@tcworks.net> Message-ID: On Sat, 16 Feb 2002, Chris Cook wrote: > Is it possible to dial into a Pipeline 75 or 130 directly, with no > modem hooked up to the POTS jack or is the unit lacking the DSPs that > would make this possible? There's no analog modem inside the sucker. -- Nate Carlson | Phone : (952)943-8700 http://www.real-time.com | Fax : (952)943-8500 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From max_and_tnt at hotmail.com Mon Feb 18 11:55:44 2002 From: max_and_tnt at hotmail.com (Joe Max) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] Re: (ASCEND) Use pipe to replace terminal adapter Message-ID: You will need to use NAT on the pipe since you need to have a fixed IP address on its ethernet. Good luck, -Joe >I have a 3ComImpaqIQ terminal adapter I use to connect to my isp. Its a >ISDN modem so I figured I could just use a Pipe50 to replace the 3com. I >put the dial #, MyName, and Send PW, parameter in the pipe and manually >dial >and am able to connecto to the ISP for about 20 sec. then the connection >terminates. While its connected, I cant connect to the internet or >anything. Im not sure how this is supposed to work or if you can even do >it. Since it is Dialup ISDN, I dont have a static IP so I guess the IP >should be assigned buy the ISP. Any input will help _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From max_and_tnt at hotmail.com Mon Feb 18 11:59:42 2002 From: max_and_tnt at hotmail.com (Joe Max) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] Re: (ASCEND) Load Balancing Message-ID: Yes, they do. Just make sure that you add equal cost routes over each one of the paths and the MAX will load balance across those paths. >Does MAX6000 or Terminator supports Load Balancing like a Cisco Router? >If the answer is no, how can I do something similiar to make balance >between >two links using unchanilized E1? >PS.: I am using different subnets in each E1. _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From max_and_tnt at hotmail.com Mon Feb 18 12:11:39 2002 From: max_and_tnt at hotmail.com (Joe Max) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] RE: (ASCEND) Disconnect code 120 Message-ID: You are asking for a service which is either unconfigured or unavailable on your box. For example, you would get this code if you try to request an L2TP tunnel but you don't have the hash codes. Without looking at your users file + syslogs, it would be very hard to guess as to what is wrong. -Joe >No I know what it means - Protocol unsupported - but what exactly is >unsupported? > >Sean > > > > > > -----Original Message----- > > > From: owner-ascend-users@max.bungi.com > > > [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Sean Watkins > > > Sent: 18 February 2002 14:49 > > > To: ascend-users@max.bungi.com > > > Subject: (ASCEND) Disconnect code 120 > > > > > > > > > Anyone know what this one is for? _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From acrossnik at hotmail.com Mon Feb 18 13:33:22 2002 From: acrossnik at hotmail.com (Alex .) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] RE: (ASCEND) Load Balancing Message-ID: Possible solution could be by using OSPF. TAOS supports Multipath OSPF routing. Alex >From: "James Courtier-Dutton" >To: "Rubens Rodrigues da Silva" , > >Subject: RE: (ASCEND) Load Balancing >Date: Mon, 18 Feb 2002 00:28:44 -0000 > >I am not sure if the Lucent MAX6000 or Lucent Terminator supports Load >Balancing, but the Lucent Access Point 300 range does, and they support >unchannelized E1. >http://www.lucent.com/products/solution/0,,CTID+2012-STID+10419-SOID+1218-LO >CL+1,00.html > >Cheers >James > > > > -----Original Message----- > > From: owner-ascend-users@max.bungi.com > > [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Rubens Rodrigues > > da Silva > > Sent: 16 February 2002 21:12 > > To: ascend-users@max.bungi.com > > Subject: (ASCEND) Load Balancing > > > > > > Does MAX6000 or Terminator supports Load Balancing like a Cisco Router? > > If the answer is no, how can I do something similiar to make > > balance between > > two links using unchanilized E1? > > PS.: I am using different subnets in each E1. > > > > Thanks. > > > > BRGDS > > > > Rubens R. Silva > > > > ++ Ascend Users Mailing List ++ > > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > > Archives: http://www.nexial.com/mailinglists/ > >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >Archives: http://www.nexial.com/mailinglists/ _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From Dale.Foster at chron.com Mon Feb 18 21:51:40 2002 From: Dale.Foster at chron.com (Foster, Dale) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] (ASCEND) PPTP and NAT Message-ID: <901D241E5C0AD511BEEB00600845C2DD06E0D2@boffice4> Anyone know why password authentication would fail on the following situation. Pipe50 with NAT. Connects to internet OK. When I try to connect to a PPTP server, the communication starts, but when the password authentication starts I never get the GRE packets the server sends. I think the NAT is blocking it. Dale A. Foster Technology Maint. & Support Houston Chronicle 801 Texas Avenue Houston, Texas 77002 Phone (713) 220-7924 Fax (713) 354-3127 mailto:Dale.Foster@chron.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From Dale.Foster at chron.com Mon Feb 18 21:53:31 2002 From: Dale.Foster at chron.com (Foster, Dale) Date: Tue Jan 18 14:01:43 2005 Subject: [Ascend] (ASCEND) disconnecting users Message-ID: <901D241E5C0AD511BEEB00600845C2DD06E0D3@boffice4> Anyone know how to disconnect a dial-up user after they have been idle for more than 15min. I have a MAX4000 and the users dial in on a T1 the max has the 56k modems. - no isdn. Dale A. Foster Technology Maint. & Support Houston Chronicle 801 Texas Avenue Houston, Texas 77002 Phone (713) 220-7924 Fax (713) 354-3127 mailto:Dale.Foster@chron.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From netlink at netlinkcorp.com Mon Feb 18 22:39:50 2002 From: netlink at netlinkcorp.com (NET-LINK) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] Re: (ASCEND) disconnecting users References: <901D241E5C0AD511BEEB00600845C2DD06E0D3@boffice4> Message-ID: <3C71D716.4CCD@netlinkcorp.com> If you are using a radius server to authenticate the dialup user, try using the following attribute in the users profile Idle-Limit = 900, 900 is equal to 900 seconds or 15 minutes for the idle to timeout. Hope this helps ------- R. Hall NET-LINK Corp. Foster, Dale wrote: > > Anyone know how to disconnect a dial-up user after they have been idle for > more than 15min. I have a MAX4000 and the users dial in on a T1 the max > has the 56k modems. - no isdn. > > Dale A. Foster > Technology Maint. & Support > Houston Chronicle > 801 Texas Avenue > Houston, Texas 77002 > Phone (713) 220-7924 > Fax (713) 354-3127 > mailto:Dale.Foster@chron.com > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From carletti at mobilia.it Tue Feb 19 07:52:35 2002 From: carletti at mobilia.it (Filippo Carletti) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] SNMP vulnerabilities Message-ID: <01ec01c1b94c$afb91540$11bdfea9@filippoasus> Where can I find informations on Ascend products concerning http://www.cert.org/advisories/CA-2002-03.html I browsed support.lucent.com but found nothing. Thanks. Ciao, Filippo From fherrera at iplan.com.ar Tue Feb 19 07:59:56 2002 From: fherrera at iplan.com.ar (Fernando Herrera) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] Acct and Auth In-Reply-To: Message-ID: Does anybody know how to do only accounting and not authentication (i mean, if the dialup user types a wrong username, to let him connect the same) on a MAX TNT? Fernando From sean at northrock.bm Tue Feb 19 11:37:12 2002 From: sean at northrock.bm (Sean Watkins) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] (ASCEND) Disconnect code 11? Message-ID: Hi anyone know what Disconnect code 11 is? I know its modem detected DCD, then went in active... but.. what when inactive? In experience what does this mean? Sean ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From rbadilla at cesa.co.cr Tue Feb 19 12:05:39 2002 From: rbadilla at cesa.co.cr (Randall Badilla) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] Problems with MP ISDN BRI users on Maxtnt Message-ID: Hi all, My MaxTNT has TAOS 9.1.3 and the following hardware conf. 1 * 8 E1 ports 1 * 48 MDSP ports 1 * 1 FastEthernet port. --- My problems is: When a ISDN Bri call is MP, the user get authenticated and logged in. He/She can ping to anything on the internet, but when tries to browse with any web browser the user only get "... contacting...". If we telnet to the web port of the site the conecction is ultra fast. But with a Browser is slooooooooow and get no data. So in my TNT the MP call is conf: Framed-protocol = MP base-channel-count =2 maximum-channels = 2 .... The wierd thing is with MP analog calls.... they work like a charm!!! ... PPP calls works fine also. *** By now, my ISDN clients are using only 1 B channel, instead both ones. PD: Did anybody know why Windows 98 ppp calls work fine on MaxTNT and Windows 2000 ppp calls don't work fine. From justin at midmo.com Tue Feb 19 16:18:08 2002 From: justin at midmo.com (Justin Banks) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] RE: (ASCEND) Disconnect code 11? In-Reply-To: Message-ID: Check out this website, I've had some pretty good success w/ recommending the customers that I talk to try some of these things: http://www.lost.net.au/~ben/error/dropout Sincerely, Justin Banks Technical Support Engineer Mid Missouri Online, Inc. -----Original Message----- From: owner-ascend-users@max.bungi.com [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Sean Watkins Sent: Tuesday, February 19, 2002 11:37 AM To: ascend-users@max.bungi.com Subject: (ASCEND) Disconnect code 11? Hi anyone know what Disconnect code 11 is? I know its modem detected DCD, then went in active... but.. what when inactive? In experience what does this mean? Sean ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From Dale.Foster at chron.com Wed Feb 20 07:46:30 2002 From: Dale.Foster at chron.com (Foster, Dale) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] Pipe 50 and PPTP Message-ID: <901D241E5C0AD511BEEB00600845C2DD06E0DA@boffice4> Anyone out there using PPTP thru a pipe50 to connect to a PPTP server with any success. Apparantly the NAT on the pipe is stoping the GRE packets from coming back in. Dale A. Foster Technology Maint. & Support Houston Chronicle 801 Texas Avenue Houston, Texas 77002 Phone (713) 220-7924 Fax (713) 354-3127 mailto:Dale.Foster@chron.com From akrall at team.inter.net Wed Feb 20 10:12:09 2002 From: akrall at team.inter.net (Anton Krall) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] RE: (ASCEND) disconnecting users In-Reply-To: <3C71D716.4CCD@netlinkcorp.com> Message-ID: <000601c1ba29$594bcd50$0101000a@mx.inter.net> I have a tnt ... Is idle-limit the same as idle-timeout? If you tell the tnt in the default-answer / session-info to use an idle timeout of 600 and you send the parameter via radius of idle-timeout of 900... Which one is actually executed, the one with less value (the one hard coded into the tnt) or the radius sent one? Saludos Anton Krall Director de Tecnolog?a Inter.net M?xico / Panam? Tel; 5241-7609 Directo Tel: 5241-7600 Conmutador Celular: 0445-105-5160 Mobile ICQ: 4979450 email: akrall@team.inter.net web: http://www.mx.inter.net Outside Mexico: Office: +52(555)241-7609 PBX: +52(555)241-7600 Mobile: +52(555)105-5160 Original > -----Original Message----- Original > From: owner-ascend-users@max.bungi.com Original > [mailto:owner-ascend-users@max.bungi.com] On Behalf Original > Of NET-LINK Original > Sent: Lunes, 18 de Febrero de 2002 10:40 p.m. Original > To: Foster, Dale Original > Cc: ascend-users@max.bungi.com Original > Subject: Re: (ASCEND) disconnecting users Original > Original > Original > If you are using a radius server to authenticate the Original > dialup user, try using the following attribute in Original > the users profile Original > Original > Idle-Limit = 900, Original > Original > Original > 900 is equal to 900 seconds or 15 minutes for the Original > idle to timeout. Original > Original > Hope this helps Original > ------- Original > R. Hall Original > NET-LINK Corp. Original > Original > Original > Original > Original > Foster, Dale wrote: Original > > Original > > Anyone know how to disconnect a dial-up user after Original > they have been idle Original > > for more than 15min. I have a MAX4000 and the Original > users dial in on a T1 Original > > the max has the 56k modems. - no isdn. Original > > Original > > Dale A. Foster Original > > Technology Maint. & Support Original > > Houston Chronicle Original > > 801 Texas Avenue Original > > Houston, Texas 77002 Original > > Phone (713) 220-7924 Original > > Fax (713) 354-3127 Original > > mailto:Dale.Foster@chron.com Original > > Original > > ++ Ascend Users Mailing List ++ Original > > To unsubscribe: send unsubscribe to Original > ascend-users-request@bungi.com Original > > Archives: http://www.nexial.com/mailinglists/ Original > ++ Ascend Users Mailing List ++ Original > To unsubscribe: send unsubscribe to Original > ascend-users-request@bungi.com Original > Archives: http://www.nexial.com/mailinglists/ Original > Original > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From troy at psknet.com Thu Feb 21 00:43:30 2002 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] RE: (ASCEND) Max 4004 reboot problems In-Reply-To: Message-ID: <002901c1baa3$13391c30$fafbab3f@psknet.com> Make sure all your fans are working. A broken fan can disrupt your power supply. Also, check your fatal history log. It might shed some light, if not, the code posted here might help us help you. Last, I've seen Maxes do this, and don't ask me why it worked, but I've fixed them by clearing the config (fclear), resetting (nvramclear), and reconfiguring. HTH, -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com > -----Original Message----- > From: owner-ascend-users@max.bungi.com > [mailto:owner-ascend-users@max.bungi.com] On Behalf Of Rubens R. Silva > Sent: Sunday, February 10, 2002 1:56 PM > To: everett@pgweb.com > Cc: ascend-users@max.bungi.com > Subject: Re: (ASCEND) Max 4004 reboot problems > > > Try to take off some modem card, and turn on the equipment again. > Maybe some card attached to the equipment is causing the problem. > If this action don't solve the problem, i think that can be some > power supply problem. > > Regards > > Rubens R. Silva > > ---------- Mensagem original ----------- > > > > De : owner-ascend-users@max.bungi.com > > Para : ascend-users@max.bungi.com > > Cc : > > Data : Sat, 9 Feb 2002 18:39:54 -0800 (PST) > > Assunto : (ASCEND) Max 4004 reboot problems > > > > We have a Max4004 that is rebooted itself randomly. What things > can I > > check/monitor to narrow down the problem? > > > > Shawn > > > > ++ Ascend Users Mailing List ++ > > To unsubscribe: send unsubscribe to ascend-users- > request@bungi.com > > Archives: http://www.nexial.com/mailinglists/ > > > > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to > ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From troy at psknet.com Thu Feb 21 00:39:48 2002 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] RE: (ASCEND) disconnecting users In-Reply-To: <000601c1ba29$594bcd50$0101000a@mx.inter.net> Message-ID: <002801c1baa2$8efc9230$fafbab3f@psknet.com> I use a 30 minute idle timout, 6 hour session limit. TAOS 9.0.2 new ANSWER-DEFAULTS set ppp-answer receive-auth-mode = pap-ppp-auth set ip-answer assign-address = yes set session-info idle-timer = 1800 set session-info max-call-duration = 360 -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com > -----Original Message----- > From: owner-ascend-users@max.bungi.com > [mailto:owner-ascend-users@max.bungi.com] On Behalf Of Anton Krall > Sent: Wednesday, February 20, 2002 11:12 AM > To: netlink@netlinkcorp.com; 'Foster, Dale' > Cc: ascend-users@max.bungi.com > Subject: RE: (ASCEND) disconnecting users > > > I have a tnt ... Is idle-limit the same as idle-timeout? > > If you tell the tnt in the default-answer / session-info to > use an idle > timeout of 600 and you send the parameter via radius of > idle-timeout of > 900... Which one is actually executed, the one with less > value (the one > hard coded into the tnt) or the radius sent one? > > Saludos > > Anton Krall > Director de Tecnolog?a > Inter.net M?xico / Panam? > > Tel; 5241-7609 Directo > Tel: 5241-7600 Conmutador > Celular: 0445-105-5160 Mobile > ICQ: 4979450 > email: akrall@team.inter.net > web: http://www.mx.inter.net > > Outside Mexico: > Office: +52(555)241-7609 > PBX: +52(555)241-7600 > Mobile: +52(555)105-5160 > > > Original > -----Original Message----- > Original > From: owner-ascend-users@max.bungi.com > Original > [mailto:owner-ascend-users@max.bungi.com] On Behalf > Original > Of NET-LINK > Original > Sent: Lunes, 18 de Febrero de 2002 10:40 p.m. > Original > To: Foster, Dale > Original > Cc: ascend-users@max.bungi.com > Original > Subject: Re: (ASCEND) disconnecting users > Original > > Original > > Original > If you are using a radius server to authenticate the > Original > dialup user, try using the following attribute in > Original > the users profile > Original > > Original > Idle-Limit = 900, > Original > > Original > > Original > 900 is equal to 900 seconds or 15 minutes for the > Original > idle to timeout. > Original > > Original > Hope this helps > Original > ------- > Original > R. Hall > Original > NET-LINK Corp. > Original > > Original > > Original > > Original > > Original > Foster, Dale wrote: > Original > > > Original > > Anyone know how to disconnect a dial-up user after > Original > they have been idle > Original > > for more than 15min. I have a MAX4000 and the > Original > users dial in on a T1 > Original > > the max has the 56k modems. - no isdn. > Original > > > Original > > Dale A. Foster > Original > > Technology Maint. & Support > Original > > Houston Chronicle > Original > > 801 Texas Avenue > Original > > Houston, Texas 77002 > Original > > Phone (713) 220-7924 > Original > > Fax (713) 354-3127 > Original > > mailto:Dale.Foster@chron.com > Original > > > Original > > ++ Ascend Users Mailing List ++ > Original > > To unsubscribe: send unsubscribe to > Original > ascend-users-request@bungi.com > Original > > Archives: http://www.nexial.com/mailinglists/ > Original > ++ Ascend Users Mailing List ++ > Original > To unsubscribe: send unsubscribe to > Original > ascend-users-request@bungi.com > Original > Archives: http://www.nexial.com/mailinglists/ > Original > > Original > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to > ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From troy at psknet.com Thu Feb 21 00:45:50 2002 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] RE: (ASCEND) Max4004 reboots In-Reply-To: Message-ID: <003001c1baa3$66f23730$fafbab3f@psknet.com> Telco? No. Power? Yes, and most likely at this point. If not, try clearing the config (as mentioned in my other post). -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com > -----Original Message----- > From: owner-ascend-users@max.bungi.com > [mailto:owner-ascend-users@max.bungi.com] On Behalf Of shawn everett > Sent: Monday, February 11, 2002 12:03 PM > To: ascend-users@max.bungi.com > Subject: Re: (ASCEND) Max4004 reboots > > > The fatal-history log only shows Index 100: SYSTEM IS UP messages > > Here is a quick sampling of our log file showing aproximate > reboot times: > > Feb 10 08:31:24 max4000 Can't read debug profile > Feb 10 11:19:58 max4000 Can't read debug profile > Feb 10 11:54:17 max4000 Can't read debug profile > Feb 10 12:24:03 max4000 Can't read debug profile > Feb 10 12:53:02 max4000 Can't read debug profile > Feb 10 13:12:23 max4000 Can't read debug profile > Feb 10 13:32:32 max4000 Can't read debug profile > Feb 10 14:07:26 max4000 Can't read debug profile > Feb 10 16:02:01 max4000 Can't read debug profile > Feb 10 16:36:23 max4000 Can't read debug profile > Feb 10 17:06:16 max4000 Can't read debug profile > Feb 10 17:34:50 max4000 Can't read debug profile > Feb 10 18:04:58 max4000 Can't read debug profile > Feb 10 18:37:39 max4000 Can't read debug profile > Feb 10 19:17:06 max4000 Can't read debug profile > Feb 10 21:53:00 max4000 Can't read debug profile > Feb 10 22:29:07 max4000 Can't read debug profile > Feb 10 23:00:52 max4000 Can't read debug profile > Feb 10 23:32:24 max4000 Can't read debug profile > Feb 11 00:10:56 max4000 Can't read debug profile > Feb 11 03:23:50 max4000 Can't read debug profile > Feb 11 04:04:42 max4000 Can't read debug profile > Feb 11 04:40:22 max4000 Can't read debug profile > > Is it possible that this could be caused by a telco problem? > > Shawn > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to > ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From troy at psknet.com Thu Feb 21 00:52:17 2002 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] RE: (ASCEND) question about call blocking on T1s In-Reply-To: <5.1.0.14.2.20020213130853.040970d0@mail.sportsline.com> Message-ID: <003101c1baa4$4db82080$fafbab3f@psknet.com> Robert, If your radius server supports it, you can control this based on DNIS information. I don't know of anything in TAOS that allows for this, I wish it did. Nortel's CVX1800 has virtual POPs based on DNIS information, which can be used to have separate radius auth, IP pools, and default routes. With a CVX1800, you could have several ISPs share a single modem bank and PRI group, each having their own AUTH and bandwidth. Neat stuffs. -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com > -----Original Message----- > From: owner-ascend-users@max.bungi.com > [mailto:owner-ascend-users@max.bungi.com] On Behalf Of Robert Geller > Sent: Wednesday, February 13, 2002 1:13 PM > To: ascend-users@bungi.com > Subject: (ASCEND) question about call blocking on T1s > > > Group, > > Is it possible to allow/disallow calls to certain T1s on a MAX 6048. > > IE: All users can dial a local number T1 and only certain > users can dial > an 800 number T1 > > I plan on using radius auth, and Im not sure if radius can do > this. Anyone > have this same situation? > I think I can come up with a workaround on this, however I > dont want to > re-invent the wheel or spend too much time > on this if the MAX has a mechanism or solution for this. > > Thanks in advance. > > -Rob > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to > ascend-users-request@bungi.com > Archives: http://www.nexial.com/mailinglists/ > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From troy at psknet.com Thu Feb 21 00:53:17 2002 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] (ASCEND) So slow Message-ID: <003401c1baa4$7116ff60$fafbab3f@psknet.com> Is it just me, or does everyone's posts take several hours to show up on this list? -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From drwho at jippiigroup.com Thu Feb 21 01:12:05 2002 From: drwho at jippiigroup.com (Anssi Sallinen) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] Re: (ASCEND) So slow In-Reply-To: <003401c1baa4$7116ff60$fafbab3f@psknet.com> Message-ID: > Is it just me, or does everyone's posts take several hours to show up on > this list? Not just you, but in my opinion it's been slow for a while now.. Cheers, Anssi Sallinen Helsinki, Finland ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From aaghaz00 at yahoo.com Thu Feb 21 05:19:14 2002 From: aaghaz00 at yahoo.com (Mohsin Khan) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] Acct and Auth In-Reply-To: Message-ID: <20020221111914.86082.qmail@web10103.mail.yahoo.com> a-o-a use call logging option....or add another accounting server....in rad_acct_client. --- Fernando Herrera wrote: > Does anybody know how to do only accounting and not > authentication (i mean, > if the dialup user types a wrong username, to let > him connect the same) on a > MAX TNT? > > Fernando > > _______________________________________________ > rte-ascend mailing list > rte-ascend@lists.real-time.com > https://mailman.real-time.com/mailman/listinfo/rte-ascend ===== Regards, Mohsin Khan >>>Happy is the who can smile<<< __________________________________________________ Do You Yahoo!? Yahoo! Sports - Coverage of the 2002 Olympic Games http://sports.yahoo.com From troy at psknet.com Thu Feb 21 07:54:13 2002 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 14:01:44 2005 Subject: [Ascend] RE: (ASCEND) So slow In-Reply-To: Message-ID: <003901c1badf$3f14b6c0$fafbab3f@psknet.com> Nah... Not very long, only a couple years or so. I'm gonna talk to Dave to see if he'd be interested in handing it over to someone else. I've never ran a list before, but am willing to give it a shot. -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com > -----Original Message----- > From: Anssi Sallinen [mailto:drwho@jippiigroup.com] > Sent: Thursday, February 21, 2002 2:12 AM > To: Troy Settle > Cc: ascend-users@bungi.com > Subject: Re: (ASCEND) So slow > > > > Is it just me, or does everyone's posts take several hours > to show up on > > this list? > > Not just you, but in my opinion it's been slow for a while now.. > > Cheers, > > Anssi Sallinen > Helsinki, Finland > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From akrall at team.inter.net Thu Feb 21 08:55:22 2002 From: akrall at team.inter.net (Anton Krall) Date: Tue Jan 18 14:01:45 2005 Subject: [Ascend] RE: (ASCEND) disconnecting users In-Reply-To: <002801c1baa2$8efc9230$fafbab3f@psknet.com> Message-ID: <001901c1bae7$c98bab30$0101000a@mx.inter.net> But which one takes precedence... The one with lowest value (the one hardcoded into the tnt or the one sent by radius)? If the tnt has a indle timer of 600 secs and radius sends an idle-timeout = 300... Which one is excecuted.. The hardcoded one or the radius sent one??? The one with lower value or always the one from radius? Saludos Anton Krall Director de Tecnolog?a Inter.net M?xico / Panam? Tel; 5241-7609 Directo Tel: 5241-7600 Conmutador Celular: 0445-105-5160 Mobile ICQ: 4979450 email: akrall@team.inter.net web: http://www.mx.inter.net Outside Mexico: Office: +52(555)241-7609 PBX: +52(555)241-7600 Mobile: +52(555)105-5160 Original > -----Original Message----- Original > From: owner-ascend-users@max.bungi.com Original > [mailto:owner-ascend-users@max.bungi.com] On Behalf Original > Of Troy Settle Original > Sent: Jueves, 21 de Febrero de 2002 12:40 a.m. Original > To: akrall@team.mx.inter.net; Original > netlink@netlinkcorp.com; 'Foster, Dale' Original > Cc: ascend-users@max.bungi.com Original > Subject: RE: (ASCEND) disconnecting users Original > Original > Original > Original > I use a 30 minute idle timout, 6 hour session limit. Original > Original > TAOS 9.0.2 Original > Original > new ANSWER-DEFAULTS Original > set ppp-answer receive-auth-mode = pap-ppp-auth Original > set ip-answer assign-address = yes Original > set session-info idle-timer = 1800 Original > set session-info max-call-duration = 360 Original > Original > Original > -- Original > Troy Settle Original > Pulaski Networks Original > 540.994.4254 - 866.477.5638 Original > http://www.psknet.com Original > Original > Original > Original > > -----Original Message----- Original > > From: owner-ascend-users@max.bungi.com Original > > [mailto:owner-ascend-users@max.bungi.com] On Original > Behalf Of Anton Krall Original > > Sent: Wednesday, February 20, 2002 11:12 AM Original > > To: netlink@netlinkcorp.com; 'Foster, Dale' Original > > Cc: ascend-users@max.bungi.com Original > > Subject: RE: (ASCEND) disconnecting users Original > > Original > > Original > > I have a tnt ... Is idle-limit the same as idle-timeout? Original > > Original > > If you tell the tnt in the default-answer / session-info to Original > > use an idle Original > > timeout of 600 and you send the parameter via radius of Original > > idle-timeout of Original > > 900... Which one is actually executed, the one with less Original > > value (the one Original > > hard coded into the tnt) or the radius sent one? Original > > Original > > Saludos Original > > Original > > Anton Krall Original > > Director de Tecnolog?a Original > > Inter.net M?xico / Panam? Original > > Original > > Tel; 5241-7609 Directo Original > > Tel: 5241-7600 Conmutador Original > > Celular: 0445-105-5160 Mobile Original > > ICQ: 4979450 Original > > email: akrall@team.inter.net Original > > web: http://www.mx.inter.net Original > > Original > > Outside Mexico: Original > > Office: +52(555)241-7609 Original > > PBX: +52(555)241-7600 Original > > Mobile: +52(555)105-5160 Original > > Original > > Original > > Original > -----Original Message----- Original > > Original > From: owner-ascend-users@max.bungi.com Original > > Original > Original > [mailto:owner-ascend-users@max.bungi.com] On Behalf Original > > Original > Of NET-LINK Original > > Original > Sent: Lunes, 18 de Febrero de 2002 10:40 p.m. Original > > Original > To: Foster, Dale Original > > Original > Cc: ascend-users@max.bungi.com Original > > Original > Subject: Re: (ASCEND) disconnecting users Original > > Original > Original > > Original > Original > > Original > If you are using a radius server to Original > authenticate the Original > > Original > dialup user, try using the following Original > attribute in Original > > Original > the users profile Original > > Original > Original > > Original > Idle-Limit = 900, Original > > Original > Original > > Original > Original > > Original > 900 is equal to 900 seconds or 15 Original > minutes for the Original > > Original > idle to timeout. Original > > Original > Original > > Original > Hope this helps Original > > Original > ------- Original > > Original > R. Hall Original > > Original > NET-LINK Corp. Original > > Original > Original > > Original > Original > > Original > Original > > Original > Original > > Original > Foster, Dale wrote: Original > > Original > > Original > > Original > > Anyone know how to disconnect a Original > dial-up user after Original > > Original > they have been idle Original > > Original > > for more than 15min. I have a Original > MAX4000 and the Original > > Original > users dial in on a T1 Original > > Original > > the max has the 56k modems. - no isdn. Original > > Original > > Original > > Original > > Dale A. Foster Original > > Original > > Technology Maint. & Support Original > > Original > > Houston Chronicle Original > > Original > > 801 Texas Avenue Original > > Original > > Houston, Texas 77002 Original > > Original > > Phone (713) 220-7924 Original > > Original > > Fax (713) 354-3127 Original > > Original > > mailto:Dale.Foster@chron.com Original > > Original > > Original > > Original > > ++ Ascend Users Mailing List ++ Original > > Original > > To unsubscribe: send unsubscribe to Original > > Original > ascend-users-request@bungi.com Original > > Original > > Archives: http://www.nexial.com/mailinglists/ Original > > Original > ++ Ascend Users Mailing List ++ Original > > Original > To unsubscribe: send unsubscribe to Original > > Original > ascend-users-request@bungi.com Original > > Original > Archives: http://www.nexial.com/mailinglists/ Original > > Original > Original > > Original > Original > > Original > > ++ Ascend Users Mailing List ++ Original > > To unsubscribe: send unsubscribe to Original > > ascend-users-request@bungi.com Original > > Archives: http://www.nexial.com/mailinglists/ Original > > Original > > Original > Original > ++ Ascend Users Mailing List ++ Original > To unsubscribe: send unsubscribe to Original > ascend-users-request@bungi.com Original > Archives: http://www.nexial.com/mailinglists/ Original > Original > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From troy at psknet.com Thu Feb 21 09:23:47 2002 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 14:01:45 2005 Subject: [Ascend] RE: (ASCEND) disconnecting users In-Reply-To: <001901c1bae7$c98bab30$0101000a@mx.inter.net> Message-ID: Radius over-rides local values. I don't send anything via radius at all, unless it's a dedicated account. So everyone gets the 30 minute idle time and 6 hour session time. Dedicated dialup/isdn get these via radius: Ascend-Idle-Limit = 0, Ascend-Maximum-Call-Duration = 0, -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com ** -----Original Message----- ** From: Anton Krall [mailto:akrall@team.inter.net] ** Sent: Thursday, February 21, 2002 9:55 AM ** To: 'Troy Settle'; netlink@netlinkcorp.com; 'Foster, Dale' ** Cc: ascend-users@max.bungi.com ** Subject: RE: (ASCEND) disconnecting users ** ** ** But which one takes precedence... The one with lowest value (the one ** hardcoded into the tnt or the one sent by radius)? ** ** If the tnt has a indle timer of 600 secs and radius sends an ** idle-timeout = 300... Which one is excecuted.. The hardcoded one or the ** radius sent one??? The one with lower value or always the one from ** radius? ** ** Saludos ** ** Anton Krall ** Director de Tecnolog?a ** Inter.net M?xico / Panam? ** ** Tel; 5241-7609 Directo ** Tel: 5241-7600 Conmutador ** Celular: 0445-105-5160 Mobile ** ICQ: 4979450 ** email: akrall@team.inter.net ** web: http://www.mx.inter.net ** ** Outside Mexico: ** Office: +52(555)241-7609 ** PBX: +52(555)241-7600 ** Mobile: +52(555)105-5160 ** ** ** Original > -----Original Message----- ** Original > From: owner-ascend-users@max.bungi.com ** Original > [mailto:owner-ascend-users@max.bungi.com] On Behalf ** Original > Of Troy Settle ** Original > Sent: Jueves, 21 de Febrero de 2002 12:40 a.m. ** Original > To: akrall@team.mx.inter.net; ** Original > netlink@netlinkcorp.com; 'Foster, Dale' ** Original > Cc: ascend-users@max.bungi.com ** Original > Subject: RE: (ASCEND) disconnecting users ** Original > ** Original > ** Original > ** Original > I use a 30 minute idle timout, 6 hour session limit. ** Original > ** Original > TAOS 9.0.2 ** Original > ** Original > new ANSWER-DEFAULTS ** Original > set ppp-answer receive-auth-mode = pap-ppp-auth ** Original > set ip-answer assign-address = yes ** Original > set session-info idle-timer = 1800 ** Original > set session-info max-call-duration = 360 ** Original > ** Original > ** Original > -- ** Original > Troy Settle ** Original > Pulaski Networks ** Original > 540.994.4254 - 866.477.5638 ** Original > http://www.psknet.com ** Original > ** Original > ** Original > ** Original > > -----Original Message----- ** Original > > From: owner-ascend-users@max.bungi.com ** Original > > [mailto:owner-ascend-users@max.bungi.com] On ** Original > Behalf Of Anton Krall ** Original > > Sent: Wednesday, February 20, 2002 11:12 AM ** Original > > To: netlink@netlinkcorp.com; 'Foster, Dale' ** Original > > Cc: ascend-users@max.bungi.com ** Original > > Subject: RE: (ASCEND) disconnecting users ** Original > > ** Original > > ** Original > > I have a tnt ... Is idle-limit the same as idle-timeout? ** Original > > ** Original > > If you tell the tnt in the default-answer / session-info to ** Original > > use an idle ** Original > > timeout of 600 and you send the parameter via radius of ** Original > > idle-timeout of ** Original > > 900... Which one is actually executed, the one with less ** Original > > value (the one ** Original > > hard coded into the tnt) or the radius sent one? ** Original > > ** Original > > Saludos ** Original > > ** Original > > Anton Krall ** Original > > Director de Tecnolog?a ** Original > > Inter.net M?xico / Panam? ** Original > > ** Original > > Tel; 5241-7609 Directo ** Original > > Tel: 5241-7600 Conmutador ** Original > > Celular: 0445-105-5160 Mobile ** Original > > ICQ: 4979450 ** Original > > email: akrall@team.inter.net ** Original > > web: http://www.mx.inter.net ** Original > > ** Original > > Outside Mexico: ** Original > > Office: +52(555)241-7609 ** Original > > PBX: +52(555)241-7600 ** Original > > Mobile: +52(555)105-5160 ** Original > > ** Original > > ** Original > > Original > -----Original Message----- ** Original > > Original > From: owner-ascend-users@max.bungi.com ** Original > > Original > ** Original > [mailto:owner-ascend-users@max.bungi.com] On Behalf ** Original > > Original > Of NET-LINK ** Original > > Original > Sent: Lunes, 18 de Febrero de 2002 10:40 p.m. ** Original > > Original > To: Foster, Dale ** Original > > Original > Cc: ascend-users@max.bungi.com ** Original > > Original > Subject: Re: (ASCEND) disconnecting users ** Original > > Original > ** Original > > Original > ** Original > > Original > If you are using a radius server to ** Original > authenticate the ** Original > > Original > dialup user, try using the following ** Original > attribute in ** Original > > Original > the users profile ** Original > > Original > ** Original > > Original > Idle-Limit = 900, ** Original > > Original > ** Original > > Original > ** Original > > Original > 900 is equal to 900 seconds or 15 ** Original > minutes for the ** Original > > Original > idle to timeout. ** Original > > Original > ** Original > > Original > Hope this helps ** Original > > Original > ------- ** Original > > Original > R. Hall ** Original > > Original > NET-LINK Corp. ** Original > > Original > ** Original > > Original > ** Original > > Original > ** Original > > Original > ** Original > > Original > Foster, Dale wrote: ** Original > > Original > > ** Original > > Original > > Anyone know how to disconnect a ** Original > dial-up user after ** Original > > Original > they have been idle ** Original > > Original > > for more than 15min. I have a ** Original > MAX4000 and the ** Original > > Original > users dial in on a T1 ** Original > > Original > > the max has the 56k modems. - no isdn. ** Original > > Original > > ** Original > > Original > > Dale A. Foster ** Original > > Original > > Technology Maint. & Support ** Original > > Original > > Houston Chronicle ** Original > > Original > > 801 Texas Avenue ** Original > > Original > > Houston, Texas 77002 ** Original > > Original > > Phone (713) 220-7924 ** Original > > Original > > Fax (713) 354-3127 ** Original > > Original > > mailto:Dale.Foster@chron.com ** Original > > Original > > ** Original > > Original > > ++ Ascend Users Mailing List ++ ** Original > > Original > > To unsubscribe: send unsubscribe to ** Original > > Original > ascend-users-request@bungi.com ** Original > > Original > > Archives: http://www.nexial.com/mailinglists/ ** Original > > Original > ++ Ascend Users Mailing List ++ ** Original > > Original > To unsubscribe: send unsubscribe to ** Original > > Original > ascend-users-request@bungi.com ** Original > > Original > Archives: http://www.nexial.com/mailinglists/ ** Original > > Original > ** Original > > Original > ** Original > > ** Original > > ++ Ascend Users Mailing List ++ ** Original > > To unsubscribe: send unsubscribe to ** Original > > ascend-users-request@bungi.com ** Original > > Archives: http://www.nexial.com/mailinglists/ ** Original > > ** Original > > ** Original > ** Original > ++ Ascend Users Mailing List ++ ** Original > To unsubscribe: send unsubscribe to ** Original > ascend-users-request@bungi.com ** Original > Archives: http://www.nexial.com/mailinglists/ ** Original > ** Original > ** ** ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From akrall at team.inter.net Thu Feb 21 09:34:34 2002 From: akrall at team.inter.net (Anton Krall) Date: Tue Jan 18 14:01:45 2005 Subject: [Ascend] RE: (ASCEND) disconnecting users In-Reply-To: Message-ID: <001f01c1baed$435bcdf0$0101000a@mx.inter.net> Original > Ascend-Idle-Limit = 0, Original > Ascend-Maximum-Call-Duration = 0, Are these parameters the same as sending: Idle-timeout = 0 Session-timeout = 0 ?? Saludos Anton Krall Director de Tecnolog?a Inter.net M?xico / Panam? Tel; 5241-7609 Directo Tel: 5241-7600 Conmutador Celular: 0445-105-5160 Mobile ICQ: 4979450 email: akrall@team.inter.net web: http://www.mx.inter.net Outside Mexico: Office: +52(555)241-7609 PBX: +52(555)241-7600 Mobile: +52(555)105-5160 Original > -----Original Message----- Original > From: Troy Settle [mailto:troy@psknet.com] Original > Sent: Jueves, 21 de Febrero de 2002 09:24 a.m. Original > To: akrall@team.mx.inter.net Original > Cc: ascend-users@max.bungi.com Original > Subject: RE: (ASCEND) disconnecting users Original > Original > Original > Original > Radius over-rides local values. Original > Original > I don't send anything via radius at all, unless it's Original > a dedicated account. So everyone gets the 30 minute Original > idle time and 6 hour session time. Original > Original > Dedicated dialup/isdn get these via radius: Original > Original > Ascend-Idle-Limit = 0, Original > Ascend-Maximum-Call-Duration = 0, Original > Original > Original > -- Original > Troy Settle Original > Pulaski Networks Original > 540.994.4254 - 866.477.5638 Original > http://www.psknet.com Original > Original > Original > ** -----Original Message----- Original > ** From: Anton Krall [mailto:akrall@team.inter.net] Original > ** Sent: Thursday, February 21, 2002 9:55 AM Original > ** To: 'Troy Settle'; netlink@netlinkcorp.com; 'Foster, Dale' Original > ** Cc: ascend-users@max.bungi.com Original > ** Subject: RE: (ASCEND) disconnecting users Original > ** Original > ** Original > ** But which one takes precedence... The one with Original > lowest value (the one Original > ** hardcoded into the tnt or the one sent by radius)? Original > ** Original > ** If the tnt has a indle timer of 600 secs and Original > radius sends an Original > ** idle-timeout = 300... Which one is excecuted.. Original > The hardcoded one or the Original > ** radius sent one??? The one with lower value or Original > always the one from Original > ** radius? Original > ** Original > ** Saludos Original > ** Original > ** Anton Krall Original > ** Director de Tecnolog?a Original > ** Inter.net M?xico / Panam? Original > ** Original > ** Tel; 5241-7609 Directo Original > ** Tel: 5241-7600 Conmutador Original > ** Celular: 0445-105-5160 Mobile Original > ** ICQ: 4979450 Original > ** email: akrall@team.inter.net Original > ** web: http://www.mx.inter.net Original > ** Original > ** Outside Mexico: Original > ** Office: +52(555)241-7609 Original > ** PBX: +52(555)241-7600 Original > ** Mobile: +52(555)105-5160 Original > ** Original > ** Original > ** Original > -----Original Message----- Original > ** Original > From: owner-ascend-users@max.bungi.com Original > ** Original > Original > [mailto:owner-ascend-users@max.bungi.com] On Behalf Original > ** Original > Of Troy Settle Original > ** Original > Sent: Jueves, 21 de Febrero de 2002 12:40 a.m. Original > ** Original > To: akrall@team.mx.inter.net; Original > ** Original > netlink@netlinkcorp.com; 'Foster, Dale' Original > ** Original > Cc: ascend-users@max.bungi.com Original > ** Original > Subject: RE: (ASCEND) disconnecting users Original > ** Original > Original > ** Original > Original > ** Original > Original > ** Original > I use a 30 minute idle timout, 6 hour Original > session limit. Original > ** Original > Original > ** Original > TAOS 9.0.2 Original > ** Original > Original > ** Original > new ANSWER-DEFAULTS Original > ** Original > set ppp-answer receive-auth-mode = pap-ppp-auth Original > ** Original > set ip-answer assign-address = yes Original > ** Original > set session-info idle-timer = 1800 Original > ** Original > set session-info max-call-duration = 360 Original > ** Original > Original > ** Original > Original > ** Original > -- Original > ** Original > Troy Settle Original > ** Original > Pulaski Networks Original > ** Original > 540.994.4254 - 866.477.5638 Original > ** Original > http://www.psknet.com Original > ** Original > Original > ** Original > Original > ** Original > Original > ** Original > > -----Original Message----- Original > ** Original > > From: owner-ascend-users@max.bungi.com Original > ** Original > > [mailto:owner-ascend-users@max.bungi.com] On Original > ** Original > Behalf Of Anton Krall Original > ** Original > > Sent: Wednesday, February 20, 2002 11:12 AM Original > ** Original > > To: netlink@netlinkcorp.com; 'Foster, Dale' Original > ** Original > > Cc: ascend-users@max.bungi.com Original > ** Original > > Subject: RE: (ASCEND) disconnecting users Original > ** Original > > Original > ** Original > > Original > ** Original > > I have a tnt ... Is idle-limit the Original > same as idle-timeout? Original > ** Original > > Original > ** Original > > If you tell the tnt in the Original > default-answer / session-info to Original > ** Original > > use an idle Original > ** Original > > timeout of 600 and you send the Original > parameter via radius of Original > ** Original > > idle-timeout of Original > ** Original > > 900... Which one is actually Original > executed, the one with less Original > ** Original > > value (the one Original > ** Original > > hard coded into the tnt) or the Original > radius sent one? Original > ** Original > > Original > ** Original > > Saludos Original > ** Original > > Original > ** Original > > Anton Krall Original > ** Original > > Director de Tecnolog?a Original > ** Original > > Inter.net M?xico / Panam? Original > ** Original > > Original > ** Original > > Tel; 5241-7609 Directo Original > ** Original > > Tel: 5241-7600 Conmutador Original > ** Original > > Celular: 0445-105-5160 Mobile Original > ** Original > > ICQ: 4979450 Original > ** Original > > email: akrall@team.inter.net Original > ** Original > > web: http://www.mx.inter.net Original > ** Original > > Original > ** Original > > Outside Mexico: Original > ** Original > > Office: +52(555)241-7609 Original > ** Original > > PBX: +52(555)241-7600 Original > ** Original > > Mobile: +52(555)105-5160 Original > ** Original > > Original > ** Original > > Original > ** Original > > Original > -----Original Message----- Original > ** Original > > Original > From: Original > owner-ascend-users@max.bungi.com Original > ** Original > > Original > Original > ** Original > Original > [mailto:owner-ascend-users@max.bungi.com] On Behalf Original > ** Original > > Original > Of NET-LINK Original > ** Original > > Original > Sent: Lunes, 18 de Original > Febrero de 2002 10:40 p.m. Original > ** Original > > Original > To: Foster, Dale Original > ** Original > > Original > Cc: ascend-users@max.bungi.com Original > ** Original > > Original > Subject: Re: (ASCEND) Original > disconnecting users Original > ** Original > > Original > Original > ** Original > > Original > Original > ** Original > > Original > If you are using a radius Original > server to Original > ** Original > authenticate the Original > ** Original > > Original > dialup user, try using Original > the following Original > ** Original > attribute in Original > ** Original > > Original > the users profile Original > ** Original > > Original > Original > ** Original > > Original > Idle-Limit = 900, Original > ** Original > > Original > Original > ** Original > > Original > Original > ** Original > > Original > 900 is equal to 900 seconds or 15 Original > ** Original > minutes for the Original > ** Original > > Original > idle to timeout. Original > ** Original > > Original > Original > ** Original > > Original > Hope this helps Original > ** Original > > Original > ------- Original > ** Original > > Original > R. Hall Original > ** Original > > Original > NET-LINK Corp. Original > ** Original > > Original > Original > ** Original > > Original > Original > ** Original > > Original > Original > ** Original > > Original > Original > ** Original > > Original > Foster, Dale wrote: Original > ** Original > > Original > > Original > ** Original > > Original > > Anyone know how to disconnect a Original > ** Original > dial-up user after Original > ** Original > > Original > they have been idle Original > ** Original > > Original > > for more than 15min. I have a Original > ** Original > MAX4000 and the Original > ** Original > > Original > users dial in on a T1 Original > ** Original > > Original > > the max has the 56k Original > modems. - no isdn. Original > ** Original > > Original > > Original > ** Original > > Original > > Dale A. Foster Original > ** Original > > Original > > Technology Maint. & Support Original > ** Original > > Original > > Houston Chronicle Original > ** Original > > Original > > 801 Texas Avenue Original > ** Original > > Original > > Houston, Texas 77002 Original > ** Original > > Original > > Phone (713) 220-7924 Original > ** Original > > Original > > Fax (713) 354-3127 Original > ** Original > > Original > > mailto:Dale.Foster@chron.com Original > ** Original > > Original > > Original > ** Original > > Original > > ++ Ascend Users Mailing List ++ Original > ** Original > > Original > > To unsubscribe: send Original > unsubscribe to Original > ** Original > > Original > ascend-users-request@bungi.com Original > ** Original > > Original > > Archives: Original > http://www.nexial.com/mailinglists/ Original > ** Original > > Original > Original > ++ Ascend Users Mailing List ++ Original > ** Original > > Original > To unsubscribe: send Original > unsubscribe to Original > ** Original > > Original > ascend-users-request@bungi.com Original > ** Original > > Original > Archives: Original > http://www.nexial.com/mailinglists/ Original > ** Original > > Original > Original > Original > ** Original > > Original > Original > ** Original > > Original > ** Original > > ++ Ascend Users Mailing List ++ Original > ** Original > > To unsubscribe: send unsubscribe to Original > ** Original > > ascend-users-request@bungi.com Original > ** Original > > Archives: http://www.nexial.com/mailinglists/ Original > ** Original > > Original > ** Original > > Original > ** Original > Original > ** Original > ++ Ascend Users Mailing List ++ Original > ** Original > To unsubscribe: send unsubscribe to Original > ** Original > ascend-users-request@bungi.com Original > ** Original > Archives: http://www.nexial.com/mailinglists/ Original > ** Original > Original > ** Original > Original > ** Original > ** Original > Original > Original > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From troy at psknet.com Thu Feb 21 09:42:51 2002 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 14:01:45 2005 Subject: [Ascend] RE: (ASCEND) disconnecting users In-Reply-To: <001f01c1baed$435bcdf0$0101000a@mx.inter.net> Message-ID: That, I don't know. When I started using Ascend equipment 6 years ago, those radius attributes weren't supported quite right (or not at all?). I do not know if current versions of TAOS support them or not. Check the manual for your version of TAOS to find out. -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com ** -----Original Message----- ** From: Anton Krall [mailto:akrall@team.inter.net] ** Sent: Thursday, February 21, 2002 10:35 AM ** To: 'Troy Settle' ** Cc: ascend-users@max.bungi.com ** Subject: RE: (ASCEND) disconnecting users ** ** ** Original > Ascend-Idle-Limit = 0, ** Original > Ascend-Maximum-Call-Duration = 0, ** ** Are these parameters the same as sending: ** ** Idle-timeout = 0 ** Session-timeout = 0 ?? ** ** ** ** Saludos ** ** Anton Krall ** Director de Tecnolog?a ** Inter.net M?xico / Panam? ** ** Tel; 5241-7609 Directo ** Tel: 5241-7600 Conmutador ** Celular: 0445-105-5160 Mobile ** ICQ: 4979450 ** email: akrall@team.inter.net ** web: http://www.mx.inter.net ** ** Outside Mexico: ** Office: +52(555)241-7609 ** PBX: +52(555)241-7600 ** Mobile: +52(555)105-5160 ** ** ** Original > -----Original Message----- ** Original > From: Troy Settle [mailto:troy@psknet.com] ** Original > Sent: Jueves, 21 de Febrero de 2002 09:24 a.m. ** Original > To: akrall@team.mx.inter.net ** Original > Cc: ascend-users@max.bungi.com ** Original > Subject: RE: (ASCEND) disconnecting users ** Original > ** Original > ** Original > ** Original > Radius over-rides local values. ** Original > ** Original > I don't send anything via radius at all, unless it's ** Original > a dedicated account. So everyone gets the 30 minute ** Original > idle time and 6 hour session time. ** Original > ** Original > Dedicated dialup/isdn get these via radius: ** Original > ** Original > Ascend-Idle-Limit = 0, ** Original > Ascend-Maximum-Call-Duration = 0, ** Original > ** Original > ** Original > -- ** Original > Troy Settle ** Original > Pulaski Networks ** Original > 540.994.4254 - 866.477.5638 ** Original > http://www.psknet.com ** Original > ** Original > ** Original > ** -----Original Message----- ** Original > ** From: Anton Krall [mailto:akrall@team.inter.net] ** Original > ** Sent: Thursday, February 21, 2002 9:55 AM ** Original > ** To: 'Troy Settle'; netlink@netlinkcorp.com; 'Foster, Dale' ** Original > ** Cc: ascend-users@max.bungi.com ** Original > ** Subject: RE: (ASCEND) disconnecting users ** Original > ** ** Original > ** ** Original > ** But which one takes precedence... The one with ** Original > lowest value (the one ** Original > ** hardcoded into the tnt or the one sent by radius)? ** Original > ** ** Original > ** If the tnt has a indle timer of 600 secs and ** Original > radius sends an ** Original > ** idle-timeout = 300... Which one is excecuted.. ** Original > The hardcoded one or the ** Original > ** radius sent one??? The one with lower value or ** Original > always the one from ** Original > ** radius? ** Original > ** ** Original > ** Saludos ** Original > ** ** Original > ** Anton Krall ** Original > ** Director de Tecnolog?a ** Original > ** Inter.net M?xico / Panam? ** Original > ** ** Original > ** Tel; 5241-7609 Directo ** Original > ** Tel: 5241-7600 Conmutador ** Original > ** Celular: 0445-105-5160 Mobile ** Original > ** ICQ: 4979450 ** Original > ** email: akrall@team.inter.net ** Original > ** web: http://www.mx.inter.net ** Original > ** ** Original > ** Outside Mexico: ** Original > ** Office: +52(555)241-7609 ** Original > ** PBX: +52(555)241-7600 ** Original > ** Mobile: +52(555)105-5160 ** Original > ** ** Original > ** ** Original > ** Original > -----Original Message----- ** Original > ** Original > From: owner-ascend-users@max.bungi.com ** Original > ** Original > ** Original > [mailto:owner-ascend-users@max.bungi.com] On Behalf ** Original > ** Original > Of Troy Settle ** Original > ** Original > Sent: Jueves, 21 de Febrero de 2002 12:40 a.m. ** Original > ** Original > To: akrall@team.mx.inter.net; ** Original > ** Original > netlink@netlinkcorp.com; 'Foster, Dale' ** Original > ** Original > Cc: ascend-users@max.bungi.com ** Original > ** Original > Subject: RE: (ASCEND) disconnecting users ** Original > ** Original > ** Original > ** Original > ** Original > ** Original > ** Original > ** Original > I use a 30 minute idle timout, 6 hour ** Original > session limit. ** Original > ** Original > ** Original > ** Original > TAOS 9.0.2 ** Original > ** Original > ** Original > ** Original > new ANSWER-DEFAULTS ** Original > ** Original > set ppp-answer receive-auth-mode = pap-ppp-auth ** Original > ** Original > set ip-answer assign-address = yes ** Original > ** Original > set session-info idle-timer = 1800 ** Original > ** Original > set session-info max-call-duration = 360 ** Original > ** Original > ** Original > ** Original > ** Original > ** Original > -- ** Original > ** Original > Troy Settle ** Original > ** Original > Pulaski Networks ** Original > ** Original > 540.994.4254 - 866.477.5638 ** Original > ** Original > http://www.psknet.com ** Original > ** Original > ** Original > ** Original > ** Original > ** Original > ** Original > ** Original > > -----Original Message----- ** Original > ** Original > > From: owner-ascend-users@max.bungi.com ** Original > ** Original > > [mailto:owner-ascend-users@max.bungi.com] On ** Original > ** Original > Behalf Of Anton Krall ** Original > ** Original > > Sent: Wednesday, February 20, 2002 11:12 AM ** Original > ** Original > > To: netlink@netlinkcorp.com; 'Foster, Dale' ** Original > ** Original > > Cc: ascend-users@max.bungi.com ** Original > ** Original > > Subject: RE: (ASCEND) disconnecting users ** Original > ** Original > > ** Original > ** Original > > ** Original > ** Original > > I have a tnt ... Is idle-limit the ** Original > same as idle-timeout? ** Original > ** Original > > ** Original > ** Original > > If you tell the tnt in the ** Original > default-answer / session-info to ** Original > ** Original > > use an idle ** Original > ** Original > > timeout of 600 and you send the ** Original > parameter via radius of ** Original > ** Original > > idle-timeout of ** Original > ** Original > > 900... Which one is actually ** Original > executed, the one with less ** Original > ** Original > > value (the one ** Original > ** Original > > hard coded into the tnt) or the ** Original > radius sent one? ** Original > ** Original > > ** Original > ** Original > > Saludos ** Original > ** Original > > ** Original > ** Original > > Anton Krall ** Original > ** Original > > Director de Tecnolog?a ** Original > ** Original > > Inter.net M?xico / Panam? ** Original > ** Original > > ** Original > ** Original > > Tel; 5241-7609 Directo ** Original > ** Original > > Tel: 5241-7600 Conmutador ** Original > ** Original > > Celular: 0445-105-5160 Mobile ** Original > ** Original > > ICQ: 4979450 ** Original > ** Original > > email: akrall@team.inter.net ** Original > ** Original > > web: http://www.mx.inter.net ** Original > ** Original > > ** Original > ** Original > > Outside Mexico: ** Original > ** Original > > Office: +52(555)241-7609 ** Original > ** Original > > PBX: +52(555)241-7600 ** Original > ** Original > > Mobile: +52(555)105-5160 ** Original > ** Original > > ** Original > ** Original > > ** Original > ** Original > > Original > -----Original Message----- ** Original > ** Original > > Original > From: ** Original > owner-ascend-users@max.bungi.com ** Original > ** Original > > Original > ** Original > ** Original > ** Original > [mailto:owner-ascend-users@max.bungi.com] On Behalf ** Original > ** Original > > Original > Of NET-LINK ** Original > ** Original > > Original > Sent: Lunes, 18 de ** Original > Febrero de 2002 10:40 p.m. ** Original > ** Original > > Original > To: Foster, Dale ** Original > ** Original > > Original > Cc: ascend-users@max.bungi.com ** Original > ** Original > > Original > Subject: Re: (ASCEND) ** Original > disconnecting users ** Original > ** Original > > Original > ** Original > ** Original > > Original > ** Original > ** Original > > Original > If you are using a radius ** Original > server to ** Original > ** Original > authenticate the ** Original > ** Original > > Original > dialup user, try using ** Original > the following ** Original > ** Original > attribute in ** Original > ** Original > > Original > the users profile ** Original > ** Original > > Original > ** Original > ** Original > > Original > Idle-Limit = 900, ** Original > ** Original > > Original > ** Original > ** Original > > Original > ** Original > ** Original > > Original > 900 is equal to 900 seconds or 15 ** Original > ** Original > minutes for the ** Original > ** Original > > Original > idle to timeout. ** Original > ** Original > > Original > ** Original > ** Original > > Original > Hope this helps ** Original > ** Original > > Original > ------- ** Original > ** Original > > Original > R. Hall ** Original > ** Original > > Original > NET-LINK Corp. ** Original > ** Original > > Original > ** Original > ** Original > > Original > ** Original > ** Original > > Original > ** Original > ** Original > > Original > ** Original > ** Original > > Original > Foster, Dale wrote: ** Original > ** Original > > Original > > ** Original > ** Original > > Original > > Anyone know how to disconnect a ** Original > ** Original > dial-up user after ** Original > ** Original > > Original > they have been idle ** Original > ** Original > > Original > > for more than 15min. I have a ** Original > ** Original > MAX4000 and the ** Original > ** Original > > Original > users dial in on a T1 ** Original > ** Original > > Original > > the max has the 56k ** Original > modems. - no isdn. ** Original > ** Original > > Original > > ** Original > ** Original > > Original > > Dale A. Foster ** Original > ** Original > > Original > > Technology Maint. & Support ** Original > ** Original > > Original > > Houston Chronicle ** Original > ** Original > > Original > > 801 Texas Avenue ** Original > ** Original > > Original > > Houston, Texas 77002 ** Original > ** Original > > Original > > Phone (713) 220-7924 ** Original > ** Original > > Original > > Fax (713) 354-3127 ** Original > ** Original > > Original > > mailto:Dale.Foster@chron.com ** Original > ** Original > > Original > > ** Original > ** Original > > Original > > ++ Ascend Users Mailing List ++ ** Original > ** Original > > Original > > To unsubscribe: send ** Original > unsubscribe to ** Original > ** Original > > Original > ascend-users-request@bungi.com ** Original > ** Original > > Original > > Archives: ** Original > http://www.nexial.com/mailinglists/ ** Original > ** Original > > ** Original > Original > ++ Ascend Users Mailing List ++ ** Original > ** Original > > Original > To unsubscribe: send ** Original > unsubscribe to ** Original > ** Original > > Original > ascend-users-request@bungi.com ** Original > ** Original > > Original > Archives: ** Original > http://www.nexial.com/mailinglists/ ** Original > ** Original > > ** Original > Original > ** Original > ** Original > > Original > ** Original > ** Original > > ** Original > ** Original > > ++ Ascend Users Mailing List ++ ** Original > ** Original > > To unsubscribe: send unsubscribe to ** Original > ** Original > > ascend-users-request@bungi.com ** Original > ** Original > > Archives: http://www.nexial.com/mailinglists/ ** Original > ** Original > > ** Original > ** Original > > ** Original > ** Original > ** Original > ** Original > ++ Ascend Users Mailing List ++ ** Original > ** Original > To unsubscribe: send unsubscribe to ** Original > ** Original > ascend-users-request@bungi.com ** Original > ** Original > Archives: http://www.nexial.com/mailinglists/ ** Original > ** Original > ** Original > ** Original > ** Original > ** ** Original > ** ** Original > ** Original > ** Original > ** ** ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From richard at 808hi.com Thu Feb 21 09:47:31 2002 From: richard at 808hi.com (Richard Gamberg) Date: Tue Jan 18 14:01:45 2005 Subject: [Ascend] RE: (ASCEND) disconnecting users In-Reply-To: <001901c1bae7$c98bab30$0101000a@mx.inter.net> Message-ID: I know many people in the business use www.modemsite.com (or the mirror/ formerly 56k=v.Unreliable). Les at 5-year old 56k.com has announced he is shutting down; Like many advertising-supported content sites, Modemsite must find a new model or disappear. Premium ad-free access is now available, and I ask all of you that find my site to be of value to consider supporting it with a subscription. See www.modemsite.com/56k/subscribe.htm AND... anyone have any info on when V.92 PCM Upstream will be supported on the Max? Thanks & Aloha, Richard Gamberg, the 'v.everything' running Modemsite.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From richard at 808hi.com Thu Feb 21 13:27:07 2002 From: richard at 808hi.com (Richard Gamberg) Date: Tue Jan 18 14:01:45 2005 Subject: (ASCEND) RE: [Ascend] Should be Modemsite & Modem sites In-Reply-To: <4.3.2.7.2.20020221084248.04161700@66.81.1.25> Message-ID: The sites are one and the same. 808hi.com/56k/ is the mirror of Modemsite. What I'm trying to let you know - "free" isn't working. Aloha, Richard -----Original Message----- From: Nicholas Sten [mailto:nsten@o1.com] Sent: Thursday, February 21, 2002 7:41 AM To: richard@808hi.com; ascend-users@max.bungi.com Subject: Re: [Ascend] RE: (ASCEND) disconnecting users Try this site for free instead. Good resource. http://www.808hi.com/56k/index.asp -Nick At 05:47 AM 2/21/2002 -1000, Richard Gamberg wrote: >I know many people in the business use www.modemsite.com (or the mirror/ >formerly 56k=v.Unreliable). > >Les at 5-year old 56k.com has announced he is shutting down; >Like many advertising-supported content sites, Modemsite must find a new >model or disappear. > >Premium ad-free access is now available, and I ask all of you that find my >site to be of value to consider supporting it with a subscription. See >www.modemsite.com/56k/subscribe.htm > >AND... anyone have any info on when V.92 PCM Upstream will be supported on >the Max? > >Thanks & Aloha, >Richard Gamberg, the 'v.everything' running Modemsite.com > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From ANoriega at prima.com.ar Thu Feb 21 17:06:47 2002 From: ANoriega at prima.com.ar (Noriega, Alejandro) Date: Tue Jan 18 14:01:45 2005 Subject: [Ascend] TimeSlots Message-ID: Hello Guys! :) anybody knows how to block the E1 TimeSlots without disconnect the already connected users? I'm running Software version 7.2.4 Thx a lot! Alejandro J. Noriega Depto. Ingenier?a De Redes Pr!ma S.A Ciudad Internet \ Datamarkets Grupo Clar?n Tel:#: (54) 11-4370-6365 E-Mail: ANoriega@Prima.Com.AR From barneys at bocnet.com.au Thu Feb 21 17:07:26 2002 From: barneys at bocnet.com.au (Craig Morgan) Date: Tue Jan 18 14:01:45 2005 Subject: [Ascend] (ASCEND) Max 4000 Modem Settings Message-ID: <3.0.5.32.20020222100726.00b06650@pop3.norton.antivirus> I was wondering if anyone could recommend some settings that they use in their Max 4000 that would give our customers a more stable modem connection. What settings do you change that would reduce that chances of the call dropping out. Thanks Craig ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From ANoriega at prima.com.ar Thu Feb 21 17:03:00 2002 From: ANoriega at prima.com.ar (Noriega, Alejandro) Date: Tue Jan 18 14:01:45 2005 Subject: [Ascend] (ASCEND) TimeSlots Message-ID: Hello Guys! :) anybody knows how to block the E1 TimeSlots without disconnect the already connected users? Thx a lot! Alejandro J. Noriega Depto. Ingenier?a De Redes Pr!ma S.A Ciudad Internet \ Datamarkets Grupo Clar?n Tel:#: (54) 11-4370-6365 E-Mail: ANoriega@Prima.Com.AR ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From casino867835 at hotmail.com Fri Feb 22 02:58:24 2002 From: casino867835 at hotmail.com (casino867835@hotmail.com) Date: Tue Jan 18 14:01:46 2005 Subject: [Ascend] (ASCEND) Deposit $20, Play With $30 at Chicago 20s Casino (0792UyML@8) Message-ID: <007a53b41ade$8188a6a7$5ee14ed2@xsewam> An HTML attachment was scrubbed... URL: http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020222/99e20089/attachment.htm From mknewman at blkbox.com Fri Feb 22 07:23:18 2002 From: mknewman at blkbox.com (Marc Newman) Date: Tue Jan 18 14:01:46 2005 Subject: [Ascend] (ASCEND) User session length In-Reply-To: <200202220645.WAA08213@max.bungi.com> from "owner-ascend-users-digest@max.bungi.com" at Feb 21, 2002 10:45:01 PM Message-ID: <200202221323.g1MDNJ8g011881@blkbox.com> I never was able to talk Ascend into putting the length of time the user was logged on onto the finger and show users commands for the Max 4000, but there used to be a site www.loop.org/ascend that would do SNMP queries and show you this information. The site is now defunct. Does anyone have a copy of that web tool? Is there something that works well that is free? Marc ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From meelisk at vendomar.ee Fri Feb 22 10:45:19 2002 From: meelisk at vendomar.ee (Meelis Kingisepp) Date: Tue Jan 18 14:01:46 2005 Subject: [Ascend] (ASCEND) Searching for V.110 card for Max 6000 In-Reply-To: <200202221644.IAA11201@max.bungi.com> Message-ID: <5.1.0.14.0.20020222184016.01ec6298@194.204.4.34> Hi All, I am searching for V.110 card for Max 6000. Type code is MX-SL-8V110, is there somebody who has vacant cards, 2 pcs needed? With best regards Meelis Kingisepp Vendomar Ltd. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From nsten at o1.com Fri Feb 22 11:46:30 2002 From: nsten at o1.com (Nicholas Sten) Date: Tue Jan 18 14:01:46 2005 Subject: Fwd: [Ascend] (ASCEND) Deposit $20, Play With $30 at Chicago 20s Casino (0792UyML@8) Message-ID: <4.3.2.7.2.20020222094559.03c28470@66.81.1.25> How does this crap happen? Good grief already! -Nick >X-Authentication-Warning: max.bungi.com: majordom set sender to >owner-ascend-users using -f >From: casino867835@hotmail.com >Reply-To: >To: offers@max.bungi.com >X-Mailer: MIME-tools 5.503 (Entity 5.501) >Importance: Normal >Subject: [Ascend] (ASCEND) Deposit $20, Play With $30 at Chicago 20s >Casino >(0792UyML@8) >Sender: rte-ascend-admin@lists.real-time.com >X-BeenThere: rte-ascend@lists.real-time.com >X-Mailman-Version: 2.0.8 >List-Help: >List-Post: >List-Subscribe: , > >List-Id: Ascend Users Mailing List >List-Unsubscribe: , > >List-Archive: >Date: Fri, 22 Feb 2002 00:58:24 -0800 (PST) >X-OriginalArrivalTime: 22 Feb 2002 09:29:07.0015 (UTC) >FILETIME=[60147D70:01C1BB83] > >BIG BONUSES AND >FAST PAYMENT > >We are delighted to welcome you to Interworld Gaming's newest casino >CHICAGO20S.COM. >Not only are we offering some of the most generous online bonuses but are >giving an undertaking to process all withdrawals no later than one day >after being requested. > >To celebrate this event we are offering a >50% Welcome >Bonus >worth up to $75 > >In addition you will get free entry into our launch prize draw >with prizes worth up to $10,000. See website for details > >All you have to do is > >1). Download the >software and open a real account > >2). Deposit between $30 and $150 to take advantage of our 50% Signup bonus* > >AT LAST, YOU CAN >WIN AND BE PAID >Chicago 20's pays promptly in US$, ?GBP and uros > >*The Welcome Bonus may only be claimed once. All bonuses are per person >and only one real account per household is allowed. If further accounts >are opened, special promotions will not apply.. Bonuses, plus the amount >of your deposit required to obtain that bonus, must be wagered a minimum >of eight (8) times before requesting a withdrawal. > >DISCLAIMER: >We are strongly against continuously sending unsolicited emails to those >who do not wish to receive our special mailings. We have attained the >services of an independent 3rd party to overlook list management and >removal services. This is not unsolicited email. If you do not wish to >receive further mailings, please go to >http://remove.chicago20s.com and follow the >directions. >[0455BpKg0-799vwrW8752aaAu1-944RJwe3164Wuqr6-688acJV2914errP8-655U@61] >????,z?j)b?????N?????r??z??v?????&????q??????????-n????&?!?????i??0?w???\?o?j)b?b?????????vf??)??+-??????vX????j[b??(?m?????????y?m?g??o?j)fj???b????????? > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://shadowknight.real-time.com/pipermail/rte-ascend/attachments/20020222/5757461b/attachment.html From max_and_tnt at hotmail.com Fri Feb 22 12:51:51 2002 From: max_and_tnt at hotmail.com (Joe Max) Date: Tue Jan 18 14:01:46 2005 Subject: [Ascend] RE: (ASCEND) disconnecting users Message-ID: >> Ascend-Idle-Limit = 0, >> Ascend-Maximum-Call-Duration = 0, > >Are these parameters the same as sending: > >Idle-timeout = 0 >Session-timeout = 0 ?? Almost. There are two groups of attributes: a) Idle-Timeout (28) and Ascend-Idle-Timeout (244): Both attributes are identical and specify the maximum idle time in seconds for a call. Calls disconnected because of an idle timeout may report disconnect codes 100, 105 or 106. b) Session-Timeout (27), Ascend-Maximum-Time (194) and Ascend-Maximum-Call-Duration (125): Session-Timeout and Ascend-Maximum-time are identical and specify the maximum time that a session can remain connected, in _seconds_. Ascend-Maximum-Call-Duration is expressed in _minutes_ and it specifies the maximum time that a call within a session can remain connected. For PPP calls, this attribute is identical (except for the units) to Session-Timeout and Ascend-Maximum-Time. However, for MP or MPP calls, the Ascend-Maximum-Call-Duration attribute controls the maximum time for each call within the MP/MPP bundle, whereas Session-Timeout and Ascend-Maximum-Time specify the maximum time that a given bundle can remain connected. Calls disconnected because of an session time limit will report disconnect code 195. For attributes that are identical in function (Idle-Timeout == Ascend-Idle-Limit, and Session-Timeout == Ascend-Maximum-Time), the last attribute specified in the RADIUS response supersedes any previous value. BTW, there is yet another idle timeout attribute, Ascend-TS-Idle-Limit, which applies only to terminal server and rlogin sessions. Hope this helps, -Joe _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From juliesss at ns1.ehost2102.com Sat Feb 23 14:25:10 2002 From: juliesss at ns1.ehost2102.com (juliesss@ns1.ehost2102.com) Date: Tue Jan 18 14:01:46 2005 Subject: [Ascend] (ASCEND) Thanks For Lunch Mike Message-ID: <200202232025.g1NKPAu31296@ns1.superior98.com> Mike, Thanks again for lunch it was great! Best regards, Steve ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From scott at aobe.com Sat Feb 23 17:14:03 2002 From: scott at aobe.com (Scott Starbuck) Date: Tue Jan 18 14:01:46 2005 Subject: [Ascend] (ASCEND) IPSec/VPN/Pipeline? Message-ID: <3C78223B.680B4CB3@aobe.com> Hello, Has anyone had any experience with the IPSec/VPN and a Pipeline? I just got the v4.0 client, I have the IPSec client manual and the SCM manual but they seem a little unrelatedand no instructions on how makethem work together. When I try and load the firewall / VPN config I get a message that the Pipeline does not have IPSec support installed. I talked to Lucent and they said the 56 bit encryption would work without the IPSec feature code and yet I get the error message saying IPSec is not supported. Also, the Secure Connect Manager V3.03 and IPSec Client do not seem to be set up to work together. I can't seem to find any documentation about how to configure anywhere on Lucent website even logged in to the support site. There also seems to be conflicting information about exactly what software version is required on the Pipeline for IPSec. I have seen where the ver 7.0 was required and again that 8.0-101.0 was required. Currently the Pipeline 220 is on ver 6.1.43. Also I have seen some info on NavisConnect which may or may not be needed? Any help appreciated, Thanks, Scott Starbuck Aobe Network Group 5340 Millertown Pike, Suite 131 Knoxville, TN 37924 phone: 865-689-7290 fax: 865-688-0068 e-mail: scott@aobe.com ---------------------- ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From ahakim at link.net Sat Feb 23 23:10:52 2002 From: ahakim at link.net (Ahmad EL-Hakim) Date: Tue Jan 18 14:01:46 2005 Subject: [Ascend] MPP on 2 E1's Message-ID: Does any one on the list tried before configuring MPP connection between 2 MAX4k/6k boxes using MPP protocol. There is a parameter called "call type= Nailed/MPP", which in the manual they mention that you can have more than one nailed group number in the "Group" parameter. Did any one try before putting more than one nailed group number. Ahmad EL-Hakim From peco at aconectarse.com Mon Feb 25 09:57:40 2002 From: peco at aconectarse.com (peco@aconectarse.com) Date: Tue Jan 18 14:01:46 2005 Subject: [Ascend] (no subject) Message-ID: <1014652660.3c7a5ef4e3997@mail.aconectarse.com> I have 2 problems, 1) The TNT start to reject calls when the number of calls reach aprox 40. And the error is "Backoff Q full, user discarded". I have configured radius authentication and accounting with "Freeradius". 2) The accounting log is incomplete. There is no disconnection cause and other parameters. Bye Esteban ------------------------------------------------------- Obtenga su e-mail gratis en http://www.aconectarse.com/ 20 MBytes POP3 y Webmail. Mucho mas r?pido From troy at psknet.com Mon Feb 25 21:58:46 2002 From: troy at psknet.com (Troy Settle) Date: Tue Jan 18 14:01:46 2005 Subject: [Ascend] (ASCEND) test 2 Message-ID: <002101c1be79$e3fbba10$f2ae76cc@psknet.com> -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com Archives: http://www.nexial.com/mailinglists/ From ahmad at webnet.com.pk Tue Feb 26 01:45:45 2002 From: ahmad at webnet.com.pk (Ahmad Naseer) Date: Tue Jan 18 14:01:46 2005 Subject: [Ascend] MAX 6000 IP Assignment Error Message-ID: <3C7B3D29.50706@webnet.com.pk> Hi, We've recently adde a MAX 6000 to our RACs and we have everything working except for Fixed IP assignments. The Max-IP-Pool is working, and IP's assigned by the MAX are working, but if our Steel Belted Radius assigns an IP to the user who gets on the MAX, that user gets no data throughput. can anyone help? -- ____________ Ahmad Naseer From benzo007 at mchsi.com Thu Feb 28 14:51:11 2002 From: benzo007 at mchsi.com (Ben Nelson) Date: Tue Jan 18 14:01:46 2005 Subject: [Ascend] Looking for Software version for p-130 Message-ID: <008a01c1c099$a7e952e0$e588da0c@mchsi.com> Looking for Software version for Ascend Pipline130-1UBRI-FT1 I need to know where I can download a software version newer than 6.1.5 that will do IP/IPX ? Any ideas Thanks Ben Nelson