Hello Guys! Thanks for your reply. After enabling "Stacking" the same problem presists and in addition one more problem occured. My Netcafe clients get dissconected after 3 to 4 seconds since I enable "Stacking"... Am I missing some thing... Regards... *-*-*-*-*-*-*-*-*-*-*-* Ali Javed Tajik Network Administrator Net Zone (Pvt.) Ltd; Phones: 92-91-270820-1 http://www.netzone.net.pk > > up at 3.am writes: > - On Wed, 5 Jun 2002, Eric Schnoebelen wrote: > - > You need to enable stacking on the maxen. I have no > - > idea where it shows up on the 3000 and the 6000, but on the > - > 1800's (which I use), it is under: > - > Ethernet->Mod Config->Stack Options > - > > - > Define the stack name, and enable stacking, and it > - > should ``just work''. > - > - I just looked at this and noticed that my Max 6k running TAOS 9.0.2 has > - another option there for a Multicast address, and has an IANA multicast > - address in there (239.192.74.72) whereas the 4k doesn't show this > option > - at all. Perhaps it's hard-coded? > > There is an option for multi-cast address in TAOS 7.2.4 > on the MAX1800 as well. It wasn't there in TAOS 7.0.22 (as I > recall.) What TAOS is running on the 4000? (I _think_ 7.x.x > was the last release for both the 1800 and the 4k.) --------------------------------------------------------- This message sent using EMUmail -- http://www.emumail.com --------------------------------------------------------- Jumping through hoops to get E-mail on the road? You've got two choices: Join the circus, or use MollyMail. Molly Mail -- http://www.mollymail.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/