I'm sorry, you can't use 7.2.4 code on a slot card with 9.0.0+ code on the controller. Just won't work. > (ASCEND) Question about the 4ether-card > > ---------------------------------------------------------------------- > > From: "Jose F. Escobar" <jescobar at ayustar.com> > Date: Wed, 26 Jun 2002 14:26:59 -0400 > Subject: (ASCEND) Question about the 4ether-card > > When i hit the uptime -a command i get the following: > > { shelf-1 slot-1 } 4ether-card 0 days 00:15:16 7.2.4 > { shelf-1 slot-2 } 8t1-card 0 days 01:00:07 9.0.0 > { shelf-1 slot-3 } 8t1-card 0 days 01:00:07 9.0.0 > { shelf-1 slot-4 } csm3v-card 0 days 00:57:55 9.0.0 > { shelf-1 slot-5 } csm3v-card 0 days 00:57:55 9.0.0 > { shelf-1 slot-6 } csm3v-card 0 days 00:57:55 9.0.0 > { shelf-1 slot-7 } csm3v-card 0 days 00:57:54 9.0.0 > { shelf-1 slot-8 } csm3v-card 0 days 00:57:54 9.0.0 > { shelf-1 slot-9 } csm3v-card 0 days 00:57:54 9.0.0 > { shelf-1 slot-10 } csm3v-card 0 days 00:57:54 9.0.0 > { shelf-1 slot-11 } csm3v-card 0 days 00:57:54 9.0.0 > { shelf-1 slot-12 } csm3v-card 0 days 00:57:54 9.0.0 > { shelf-1 slot-13 } csm3v-card 0 days 00:57:54 9.0.0 > { shelf-1 slot-14 } csm3v-card 0 days 00:57:54 9.0.0 > { shelf-1 slot-15 } csm3v-card 0 days 00:57:54 9.0.0 > { shelf-1 slot-16 } csm3v-card 0 days 00:57:54 9.0.0 > { shelf-1 controller } shelf-controller 0 days 01:01:06 9.0.0 > > I'm currently running TAOS version 9.0-159.0 and there is no "driver" for that card. > > I found that version 7.2.4 has it so I loaded the enet "driver". When I use the sh command i get the following: > > { shelf-1 slot-1 0 } UP UP 4ether-card > > But when the card boots up it says this: > > LOG alert, Shelf 1, Slot 1, Time: 11:09:18-- > Could not create IP-INTERFACE profile for { 1 1 5 } > > LOG alert, Shelf 1, Slot 1, Time: 11:09:18-- > Could not create ETHERNET profile for { 1 1 5 } > > LOG alert, Shelf 1, Slot 1, Time: 11:09:18-- > Could not create IPX-INTERFACE profile for { 1 1 5 } > > and if I assign an ip to any of the ethernet interfaces that show on ip-int, it doesn't respond. > > What could be wrong, or what could be the fix? > > Thanks > Jose Escobar > jescobar at ayustar.com > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request at bungi.com > Archives: http://www.nexial.com/mailinglists/ > > ------------------------------ > > End of ascend-users-digest V96 #2585 > ************************************ > > ++ Ascend Users Mailing List Digest++ > To unsubscribe: > "echo unsubscribe | mail ascend-users-digest-request at bungi.com" > Archives: http://www.nexial.com/mailinglists/ > -- Gordon Mackenzie (510) 747-2790 Software Quality Assurance < Alameda < Access Engineering < INS < Lucent mailto:gordo at lucent.com http://www.lucent.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/