You can do this in radius as well. For a /30 (2 useable IPs): joeuser Auth-Type = System Service-Type = Framed-User Framed-Protocol=PPP Framed-IP-Address=first.ip.address Framed-IP-Netmask=255.255.255.252 On Thu, 30 May 2002, Chad Whitten wrote: > you can setup a static profile on the max or tnt and assign the customer a > block of ip's (/30, /29, whatever). That is what i do for ISDN customers who > need more than 1 ip address. typically i assign a /30 which gives them an ip > for their router and an ip for their gateway/firewall/vpn device. If they > need public ips on their lan (why they would i have no idea) i assign them a > either a /29 or /28 and charge them for the extra ips. > > > > On Thursday 30 May 2002 17:20, you wrote: > > I normally set users PPP and I cant find where its possible to set an IP > > alias (especially not via radius which I need to be able to do).. > > > > Is it possible? I have a client wanting 2 IPs for some vpn project. > > > > ++ Ascend Users Mailing List ++ > > To unsubscribe: send unsubscribe to ascend-users-request at bungi.com > > Archives: http://www.nexial.com/mailinglists/ > > -- > Chad Whitten > neXband Communications > cwhitten at nexband.com > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request at bungi.com > Archives: http://www.nexial.com/mailinglists/ > James Smallacombe PlantageNet, Inc. CEO and Janitor up at 3.am http://3.am ========================================================================= ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/