Looks like the PPP handshake fails.
I would use a telnet client which can capture to file, go into diagnostics
mode and do a "wannext 1500".
Feed that file to "ethereal" and you will get a quite good understanding
what happens.

For a quick analysis of the snipplet you gave I would say that the giving
away of the IP address fails or is late  since the host is still "0.0.0.0".

Burkhard Weeber
viastore systems GmbH
P/O Box 300668
D-70446 Stuttgart
Tel: +49-711-9818-0
Email: B.Weeber at viastore.de

Disclaimer:
The opinions expressed herein are my personal points of view and do not
represent those of my employer.

Windows95: <win-doz-nin-te-fiv> n.
32 bit extensions and a graphical shell for a 16 bit patch to an 8 bit
operating system originally coded for a 4 bit microprocessor, written by
a 2 bit company, that can't stand 1 bit of competition.



> -----Original Message-----
> From: niblettda at gru.com [mailto:niblettda at gru.com]
> Sent: Monday, November 25, 2002 3:15 PM
> To: b.weeber at viastore.de
> Subject: RE: (ASCEND) Disconnect code 185, Progress 30 problem
>
>
> Burkhard,
>
> It takes 20 seconds from the time the call starts to when
> the TNT hangs up.  I suppose that is could be too short, but
> that doesn't seem to be to me.  Here is a chunk of syslog
> that I have on one of these calls.
>
> Nov 25 08:56:53 tnt2 1/17: [1/1/1/14] Incoming Call,
> 3523795987 [MBID 2214;
> 3523795987->3525821111]
> Nov 25 08:56:53 tnt2 1/17: [1/5/72/0] Assigned to port,
> 3523795987 [MBID
> 2214; 3523795987->3525821111]
> Nov 25 08:56:55 tnt2 1/17: [1/1/1/14] Call Connected,
> 3523795987 [MBID 2214;
> 3523795987->3525821111]
> Nov 25 08:57:16 tnt2 1/17: [1/1/1/14] Call Disconnected [MBID 2214;
> 3523795987->3525821111]
> Nov 25 08:57:16 tnt2 1/17: [1/5/72/0] Call Terminated [MBID 2214;
> 3523795987->3525821111]
> Nov 25 08:57:16 tnt2 1/5: [1/5/72/0] STOP: 'Answer'; cause
> 185.; progress
> 30.; host 0.0.0.0 [MBID 2214; 3523795987->3525821111] [Answer]
>
> Thanks!
>
> --
> David A. Niblett               | eMail: niblettda at gru.net
> Network Administrator          | Phone: (352) 334-3400
> Gainesville Regional Utilities | Web: http://www.gru.net/
>
>
>
> > -----Original Message-----
> > From: Burkhard Weeber [mailto:b.weeber at viastore.de]
> > Sent: Monday, November 25, 2002 8:42 AM
> > To: niblettda at gru.com
> > Subject: RE: (ASCEND) Disconnect code 185, Progress 30 problem
> >
> >
> > See the RADIUS documentation:
> >
> > Disconnect code 185 -> remote end hung up
> > Progress code 30 -> virtual connection has ended.
> >
> > Looks like there is a very tight timeout on the connection
> > program on your
> > clients.
> >
> > Burkhard Weeber
> > viastore systems GmbH
> > P/O Box 300668
> > D-70446 Stuttgart
> > Tel: +49-711-9818-0
> > Email: B.Weeber at viastore.de
> >
> > Disclaimer:
> > The opinions expressed herein are my personal points of view
> > and do not
> > represent those of my employer.
> >
> > Windows95: <win-doz-nin-te-fiv> n.
> > 32 bit extensions and a graphical shell for a 16 bit patch
> to an 8 bit
> > operating system originally coded for a 4 bit microprocessor,
> > written by
> > a 2 bit company, that can't stand 1 bit of competition.
> >
> >
> >
> > > -----Original Message-----
> > > From: owner-ascend-users at max.bungi.com
> > > [mailto:owner-ascend-users at max.bungi.com]On Behalf Of
> > > niblettda at gru.com
> > > Sent: Monday, November 25, 2002 1:58 PM
> > > To: ascend-users at bungi.com
> > > Subject: FW: (ASCEND) Disconnect code 185, Progress 30 problem
> > >
> > >
> > > Anyone have any thoughts on below?  No on responded so I
> > > wanted to repost my plea for help.
> > >
> > > Thanks.
> > >
> > > --
> > > David A. Niblett               | eMail: niblettda at gru.net
> > > Network Administrator          | Phone: (352) 334-3400
> > > Gainesville Regional Utilities | Web: http://www.gru.net/
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: niblettda at gru.com [mailto:niblettda at gru.com]
> > > Sent: Wednesday, November 20, 2002 2:25 PM
> > > To: ascend-users at bungi.com
> > > Subject: (ASCEND) Disconnect code 185, Progress 30 problem
> > >
> > >
> > > Hi all,
> > >
> > > I'm hoping that some still read this list out there.  I've
> > > got a very strange issue with a group of users.  Let me
> > > first start with what I had.
> > >
> > > 2 MaxTNT's with 96 port modem cards and 2 8 port T1 cards.
> > > We received all of our PRI's from the local telco.
> > >
> > > We then purchased our own telco switch to handle our PRI's
> > > and stop paying the local telco.  So now we get trunks from
> > > the LEC, which I then turn into PRI's to service our TNT's.
> > >
> > > At the same time I switched from using the 8 port T1 cards
> > > to using a channelized DS3 card.
> > >
> > >
> > > My problem is with the new set up, 99% of my customers work
> > > just fine.  However, it would appear that almost all of my
> > > Mac clients can't connect, they get a 185/30 for the
> > > disconnect/progress code.  According to Ascend 185/30 =
> > >
> > >  The TAOS unit received the user's modem call and allocated a
> > >  modem to answer the call. Before completing modem
> > >  negotiation, the TAOS unit could not detect any signal from
> > >  the user's computer modem, probably because the modems
> > >  had marginal line quality. Because the TAOS unit's modem
> > >  has a digital connection to its local CO, the poor line quality
> > >  occurred between the user's modem and its local CO. The
> > >  problem might also have been caused by an incompatibility
> > >  between the modems.
> > >
> > > These customers can connect at speeds slower than ~40k, but
> > > never connect at higher.  The weird part is that a Windows
> > > laptop works just fine at 49k on their phone line.
> > >
> > > To add to the weirdness, I now have one ISDN customer (using
> > > a windows PC) that can connect at 56K, but not at 64K.  They
> > > get the exact same 185/30 as the Mac people.
> > >
> > > So I don't see how it can be phone line related since the
> > > ISDN user has digital lines, and we have digital PRI's.
> > >
> > > Please help me before I loose all my hair and have a flat spot
> > > on my head from banging it on the wall.
> > >
> > > Thanks.
> > >
> > > --
> > > David A. Niblett               | eMail: niblettda at gru.net
> > > Network Administrator          | Phone: (352) 334-3400
> > > Gainesville Regional Utilities | Web: http://www.gru.net/
> > >
> > > ++ Ascend Users Mailing List ++
> > > To unsubscribe:	send unsubscribe to
> > > ascend-users-request at bungi.com
> > > Archives: http://www.nexial.com/mailinglists/
> > > ++ Ascend Users Mailing List ++
> > > To unsubscribe:	send unsubscribe to
> > > ascend-users-request at bungi.com
> > > Archives: http://www.nexial.com/mailinglists/
> > >
> >
>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request at bungi.com
Archives: http://www.nexial.com/mailinglists/