hello, we use navis radius for our max-tnt and i found that i have to set not only the ip-address but additional a netmask of 255.255.255.255: Framed-IP-Address = xx.xx.xx.xx Framed-IP-Netmask = 255.255255.255 Heribert Kruell jawad bokhari <bokhari_jawad at yahoo.c An: ascend-users at bungi.com om> Kopie: Gesendet von: Thema: (ASCEND) static ip not working with MAX TNT owner-ascend-users at max .bungi.com 06.09.2002 13:37 Hi, We are using MAX TNT and using Radiator RADIUS server. Everything is fine except static ip assignment from RADIUS. User is authenticated and MAX sends its accounting start record as well. But soon after Acct-Start, Acct-stop is sent and the Ascend-Disconnect-Cause is "unknown"(2). Please help!! Following is brief log of authentication and accounting found at radius server. Code: Access-Request Attributes: User-Name = "xxxxx" User-Password = "<221>Wm<17><232><13><170>y" NAS-IP-Address = xx.xx.xx.xx NAS-Port = 2067 NAS-Port-Type = Async Service-Type = Framed-User Framed-Protocol = PPP State = "" Calling-Station-Id = "0512105529" Acct-Session-Id = "396549219" Ascend-Endpoint-Disc = "<1><137><168><185><203><188>#K<11><168> <25><225><168><24><4><147>" Ascend-Data-Rate = 31200 Ascend-Xmit-Rate = 50667 *** Sending to xxx.xxx.xxx.x port 7022 .... Code: Access-Accept Attributes: Framed-IP-Address = xxx.xxx.xxx.xx Session-Timeout = 2511534 ***************************************************** Code: Accounting-Request Attributes: User-Name = "xxxxxxx" NAS-IP-Address = xx.xx.xx.xx NAS-Port = 2067 NAS-Port-Type = Async Acct-Status-Type = Start Acct-Delay-Time = 0 Acct-Session-Id = "396549219" Acct-Authentic = RADIUS Ascend-Multilink-ID = 2181694828 Ascend-Num-In-Multilink = 1 Acct-Link-Count = "<0><0><0><1>" Acct-Multi-Session-Id = "820a056c" Ascend-Modem-PortNo = 9 Ascend-Modem-SlotNo = 4 Ascend-Modem-ShelfNo = 1 Calling-Station-Id = "0512105529" Framed-Protocol = 262 Framed-IP-Address = xxxxxxxxx *** Sending to xxx.xxx.xxx.x port 7020 .... Code: Accounting-Response Identifier: 38 Authentic: <191><4><27>N<28><255><11><133><201><29><231><212><232>2<21><194> Attributes: *** Received from xx.xx.xx.xx port 7020 .... Code: Accounting-Request Attributes: User-Name = "xxxxx" NAS-IP-Address = xx.xx.xx.xx NAS-Port = 2067 NAS-Port-Type = Async Acct-Status-Type = Stop Acct-Delay-Time = 0 Acct-Session-Id = "396549219" Acct-Authentic = RADIUS Acct-Session-Time = 1 Acct-Input-Octets = 369 Acct-Output-Octets = 281 Acct-Input-Packets = 13 Acct-Output-Packets = 11 Ascend-Disconnect-Cause = unknown Ascend-Connect-Progress = prLanSessionUp Ascend-Data-Rate = 31200 Ascend-PreSession-Time = 23 Ascend-Pre-Input-Octets = 369 Ascend-Pre-Output-Octets = 275 Ascend-Pre-Input-Packets = 13 Ascend-Pre-Output-Packets = 10 Ascend-Xmit-Rate = 50667 Ascend-Multilink-ID = 2181694828 Ascend-Num-In-Multilink = 0 Acct-Link-Count = "<0><0><0><1>" Acct-Multi-Session-Id = "820a056c" Ascend-Modem-PortNo = 9 Ascend-Modem-SlotNo = 4 Ascend-Modem-ShelfNo = 1 Calling-Station-Id = "0512105529" Framed-Protocol = 262 Framed-IP-Address = xx.xx.xx.xx *** Sending to xx.xx.xx.xx port 7020 .... Code: Accounting-Response ***************************************************** That's all. Session-Time shows that user was connected for one second only. thanks for kind help!! __________________________________________________ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/