Do you see the caller ID when watching the call log? Use the log command and see. -- Troy Settle Pulaski Networks 540.994.4254 - 866.477.5638 http://www.psknet.com > -----Original Message----- > From: niblettda at gru.com [mailto:niblettda at gru.com] > Sent: Monday, September 30, 2002 8:22 AM > To: ascend-users at max.bungi.com > Cc: troy at psknet.com > Subject: RE: (ASCEND) Caller ID and TNT > > > I wish that was the case, but I put a sniffer on the segment > that has the TNT, and there is absolutely no information > coming from the TNT with CallerID in it. > > My Radius (RadiusNT) reports all values it gets, even the > ones that it doesn't know about in the dictionary, by number. > number 31 (CallerID) is never among them. > > In case it helps, I'm using a CT3 card for the PRI's, going > to 96 port modem cards. That's all that I have in the chassis. > > Thanks! > > -- > David A. Niblett | eMail: niblettda at gru.net > Network Administrator | Phone: (352) 334-3400 > Gainesville Regional Utilities | Web: http://www.gru.net/ > > > > > -----Original Message----- > > From: Troy Settle [mailto:troy at psknet.com] > > Sent: Sunday, September 29, 2002 1:05 PM > > To: niblettda at gru.com; ascend-users at max.bungi.com > > Subject: RE: (ASCEND) Caller ID and TNT > > > > > > > > David, > > > > In my experience, the TNT will include all available > > information in it's > > accounting data. If the callerid information shows up in > syslog, but > > not in radius accounting, then you might want to check your radius > > server to see why it's getting dropped. > > > > Good luck, > > > > -- > > Troy Settle > > Pulaski Networks > > 540.994.4254 - 866.477.5638 > > http://www.psknet.com > > > > > > > -----Original Message----- > > > From: owner-ascend-users at max.bungi.com > > > [mailto:owner-ascend-users at max.bungi.com] On Behalf Of > > > niblettda at gru.com > > > Sent: Friday, September 27, 2002 11:25 AM > > > To: ascend-users at max.bungi.com > > > Subject: (ASCEND) Caller ID and TNT > > > > > > > > > I hope some are still out there reading this list. > > > > > > I've got a MaxTNT that I'm trying to get CallerID out of. > > > I can see in the syslog output that the TNT is getting the > > > CallerID. I know the Telco is sending the CallerID (since > > > I'm the Telco). > > > > > > My issue is that I don't receive the CallerID information > > > in the Radius Accounting packet. I don't think that this > > > has anything to do with my Radius implementation since the > > > data isn't ever sent from the TNT to the Radius server. > > > Once I actually get the data, then I can troubleshoot the > > > server portion. > > > > > > I do not want to Caller ID authentication, I just want to > > > capture the caller's number for future reference. > > > > > > Any help would be greatly appreciated. > > > > > > I'm running TAOS v9.0.2. > > > > > > Thanks! > > > > > > -- > > > David A. Niblett | eMail: niblettda at gru.net > > > Network Administrator | Phone: (352) 334-3400 > > > Gainesville Regional Utilities | Web: http://www.gru.net/ > > > > > > ++ Ascend Users Mailing List ++ > > > To unsubscribe: send unsubscribe to > > > ascend-users-request at bungi.com > > > Archives: http://www.nexial.com/mailinglists/ > > > > > > > > > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/