I wish that was the case, but I put a sniffer on the segment that has the TNT, and there is absolutely no information coming from the TNT with CallerID in it. My Radius (RadiusNT) reports all values it gets, even the ones that it doesn't know about in the dictionary, by number. number 31 (CallerID) is never among them. In case it helps, I'm using a CT3 card for the PRI's, going to 96 port modem cards. That's all that I have in the chassis. Thanks! -- David A. Niblett | eMail: niblettda at gru.net Network Administrator | Phone: (352) 334-3400 Gainesville Regional Utilities | Web: http://www.gru.net/ > -----Original Message----- > From: Troy Settle [mailto:troy at psknet.com] > Sent: Sunday, September 29, 2002 1:05 PM > To: niblettda at gru.com; ascend-users at max.bungi.com > Subject: RE: (ASCEND) Caller ID and TNT > > > > David, > > In my experience, the TNT will include all available > information in it's > accounting data. If the callerid information shows up in syslog, but > not in radius accounting, then you might want to check your radius > server to see why it's getting dropped. > > Good luck, > > -- > Troy Settle > Pulaski Networks > 540.994.4254 - 866.477.5638 > http://www.psknet.com > > > > -----Original Message----- > > From: owner-ascend-users at max.bungi.com > > [mailto:owner-ascend-users at max.bungi.com] On Behalf Of > > niblettda at gru.com > > Sent: Friday, September 27, 2002 11:25 AM > > To: ascend-users at max.bungi.com > > Subject: (ASCEND) Caller ID and TNT > > > > > > I hope some are still out there reading this list. > > > > I've got a MaxTNT that I'm trying to get CallerID out of. > > I can see in the syslog output that the TNT is getting the > > CallerID. I know the Telco is sending the CallerID (since > > I'm the Telco). > > > > My issue is that I don't receive the CallerID information > > in the Radius Accounting packet. I don't think that this > > has anything to do with my Radius implementation since the > > data isn't ever sent from the TNT to the Radius server. > > Once I actually get the data, then I can troubleshoot the > > server portion. > > > > I do not want to Caller ID authentication, I just want to > > capture the caller's number for future reference. > > > > Any help would be greatly appreciated. > > > > I'm running TAOS v9.0.2. > > > > Thanks! > > > > -- > > David A. Niblett | eMail: niblettda at gru.net > > Network Administrator | Phone: (352) 334-3400 > > Gainesville Regional Utilities | Web: http://www.gru.net/ > > > > ++ Ascend Users Mailing List ++ > > To unsubscribe: send unsubscribe to > > ascend-users-request at bungi.com > > Archives: http://www.nexial.com/mailinglists/ > > > > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/