From ksm at dogbrain.com  Tue May  2 14:26:01 2000
From: ksm at dogbrain.com (Karl Morgan)
Date: Mon Jan 17 13:19:44 2005
Subject: [TCLUG] Re: [TCLUG:17041] <OT:anti-M$> *scary* stuff...
In-Reply-To: <0FTY007455882M@mail1.supervalu.com>; from Nick.T.Reinking@supervalu.com on Tue, May 02, 2000 at 01:59:49PM -0500
References: <0FTY007455882M@mail1.supervalu.com>
Message-ID: <20000502142601.A5558@dogbrain.com>

On Tue, May 02, 2000 at 01:59:49PM -0500, Nick.T.Reinking@supervalu.com wrote:

> As far as software goes, I push my machine desktop
> in more ways, and harder than I've seen any desktop
> being pushed at any place of business I've been to.
> (And it is still stable)

I would suggest wheels for something that gets pushed this much
:)

					- Karl


From ksm at dogbrain.com  Mon May 22 10:40:00 2000
From: ksm at dogbrain.com (Karl Morgan)
Date: Mon Jan 17 13:19:44 2005
Subject: [TCLUG] Re: [TCLUG:17975] E-Mail size limits.
In-Reply-To: <000501bfc400$c6a01fd0$0162a8c0@cccu.com>; from ehillman@cccu.com on Mon, May 22, 2000 at 10:17:00AM -0500
References: <000501bfc400$c6a01fd0$0162a8c0@cccu.com>
Message-ID: <20000522104000.A2684@dogbrain.com>

Eric,

In your sendmail.cf file find the following line and uncomment it

# maximum message size
#O MaxMessageSize=1000000

Which would correspond with the following mc file setting:

confMAX_MESSAGE_SIZE    MaxMessageSize  [infinite] The maximum size of messages
                                        that will be accepted (in bytes).

Regards

					- Karl

On Mon, May 22, 2000 at 10:17:00AM -0500, Eric Hillman wrote:
> Say, does anybody know the easiest way to set a maximum size limit for an
> incoming e-mail message?  We're using sendmail + procmail here, and I just spent
> all morning locating and excising a 67 Gigabyte document from somebody's
> spoolfile...
> 
> --
> Eric Hillman
> UNIX Sysadmin/Webmaster
> City & County Credit Union
> ehillman@cccu.com
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tclug-list-unsubscribe@mn-linux.org
> For additional commands, e-mail: tclug-list-help@mn-linux.org

-- 
Karl Morgan <ksm@dogbrain.com>
http://www.dogbrain.com


From ksm at dogbrain.com  Sat May 27 22:41:09 2000
From: ksm at dogbrain.com (Karl Morgan)
Date: Mon Jan 17 13:19:44 2005
Subject: [TCLUG] Re: [TCLUG:18250] multiple ethernet boards
In-Reply-To: <200005280256.VAA32613@antares.cloudnet.com>; from lxy@antares.cloudnet.com on Sat, May 27, 2000 at 09:56:25PM -0500
References: <200005280256.VAA32613@antares.cloudnet.com>
Message-ID: <20000527224109.A737@dogbrain.com>

I have to ne compatible interfaces on my system.

In /etc/conf.modules

alias eth0 ne
alias eth1 ne
options ne io=0x300,0x240 irq=3,10

You list out each cards io address and interrupt.

Regards

					- Karl

On Sat, May 27, 2000 at 09:56:25PM -0500, Brian wrote:
> I'm setting up a firewall server.  It has 3 network cards.. eth0 is to the
> DSL, eth1 is to the DMZ, eth2 is to my masquerade.  The cards are are
> identical NE2000 compatible.  I 'modprobe ne.o io=0x240 irq=10' and eth0
> pops out.  ifconfig brings the interface up with all the IPs and it
> communicates just fine.  Apparently I can only load a module once, because
> I do 'modprobe io=0x300 irq=3' for my next card, and I don't get an eth1.
> Any ideas how I can make 3 identical cards be assigned to eth0, eth1, and
> eth2?  Thanks.
> 
> -Brian
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tclug-list-unsubscribe@mn-linux.org
> For additional commands, e-mail: tclug-list-help@mn-linux.org

-- 
Karl Morgan <ksm@dogbrain.com>
http://www.dogbrain.com