You can also control your IRQs manually for PCI devices. This is more work but it is an option. In the book it says you can assign one of the "INT Pins" to a specific IRQ What slot = "INT Pin" is the NIC in. Turn off LPT2, it's taking IRQ 5 from what it says in the book. Assign the slot with the NIC in it to IRQ5. Set the rest to Auto. You can always set the system to use default and start over. Sam. Yaron wrote: >Hey, > >On Mon, 1 Sep 2003, Sam MacDonald wrote: > > > >>OK now were talking IRQ's. >> >> > >Most likely. > > > >> off subject: any motherboard under $100 is a cheapo unless it's old. >>Can you move all these to IRQ 5 or 11? >> >> > >I know. This isn't my 'main' machine... but iit kinda evolved into being >more and more 'main' than I had originally anticipated. > >I can't move them, at all. The BIOS has options: > >PIN 1 (network, display, uchi) >PIN 2 (uchi) >PIN 3 (echi) >PIN 4 (uchi) > > >Yes, uchi is taking up three IRQs. > > > > >>If you don't use the IrDa turn it off, I've seen infrared mess up video, >>serial, and network (to name a few). >> >> > >Yeah, everything that isn't neccesary is turned off. > > > >>This is the date and checksum to look for. >> >>Date code: 02/07/2003 checksum:7000 >> >> > >Yeah, that's the one it came with. Plus I flashed to it to make sure. > > >-Yaron > >-- > >_______________________________________________ >TCLUG Mailing List - Minneapolis/St. Paul, Minnesota >http://www.mn-linux.org tclug-list at mn-linux.org >https://mailman.real-time.com/mailman/listinfo/tclug-list > > > _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota http://www.mn-linux.org tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list