This is still working off the assumptions that the nc6000 is somewhat close to the nx9010, at least hotkeys-wise. Some of the earlier instructions on a page I found worked on a friend's HP Pavilion ze5155, but I haven't tried the latest to see if it works. YMMV, but it could help. http://freax.de/wiki/Installing%20RH9%20on%20a%20Compaq%20nx9010%20laptop On Sat, 14 Feb 2004, Jeff Nelson wrote: > -- external buttons for volume and mute controls don't work The volume control buttons can be used via xmodmap and whatnot, but the mute button doesn't seem to produce a keycode, so can't be used normally. Same with two or three of the five hotkeys above the keyboard. Evidently there's been an update to that page since I looked at it, with a link to a kernel module that can enable those buttons for use. You might want to check it out. > -- haven't tried using the modem If it's the Conexant, you might have luck. > My final recommendation is this: focus on one thing at a time. At first > there's so much that needs to get done, so make a check list and don't move > on to the next thing until the first is finished. I made the mistake of > bouncing around trying to fix one thing, then another, then going back to > the first. On the flip side to that, you probably shouldn't spend a week trying to get something to work. You might want to set a time limit per task. :) But yes, I can agree that flip-flopping from one task to another is less productive. Jima _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota http://www.mn-linux.org tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list