>On Fri, 16 Jan 2004 16:23:55 -0600 >Scot Jenkins <scot+tcluggen at thinkunix.net> wrote: >> it's probably seeing the dvd/cdrw via ide-scsi module but if the >> kernel fails to recoginize your scsi controller card, it surely >> won't see the scsi tape drive. what scsi card are you using? Shawn wrote: >It's an Adaptec, althought I forget the model number. I'm not >familiar with if one can load an adaptec module, if so what would it >be? modprobe adaptec or something similar? This and the tape drive >are the only scsi device in the system. The following will load the driver for all Adaptec PCI SCSI host adapters, and the 274x (EISA) and 284x (VLB) SCSI host adapters: modprobe aic7xxx There are other drivers for Adaptec SCSI host adapters based on ISA, PCMCIA, etc.: modprobe aha152x <AHA-[1510, 1520, 1522, 2825]> modprobe aha1542 <Adaptec 1542 (Trantor)> ... Sincerely, Ken Fuchs <kfuchs at winternet.com> _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota http://www.mn-linux.org tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list