Some syslog daemons you need to specify a flag (or a config parameter) to get them to accept logging from external hosts. For instance, syslogd -r You might run tcpdump and see if the syslog stuff is actually leaving the pix and getting to the linux box, but the pix config looks correct so I would assume it is. On Tue, 2004-03-09 at 13:28, Raymond Norton wrote: > I am trying to log my pix error logs to my fedora box but logs are not > showing up. > > > In the Cisco pix I have done the following: > > logging host outside (public IP) > logging timestamp > logging trap 4 > logging on. > > When you do a show logging the message count increases in size. > > > On my fedora box I have done the following: > > mkdir /var/log/pix > touch pix.log > > added the following to syslog.conf "local20.* /var/log/pix/pix.log" > > /etc/rc.d/init.d/syslog restart > > > > The pix facility is 20 > > > I have not added anything to iptables, but I stopped it for a minute to see > if it made a difference and got the same results. Any ideas what am I > missing? > > > Raymond > > > _______________________________________________ > TCLUG Mailing List - Minneapolis/St. Paul, Minnesota > http://www.mn-linux.org tclug-list at mn-linux.org > https://mailman.real-time.com/mailman/listinfo/tclug-list > _______________________________________________ TCLUG Mailing List - Minneapolis/St. Paul, Minnesota http://www.mn-linux.org tclug-list at mn-linux.org https://mailman.real-time.com/mailman/listinfo/tclug-list