Greetings: I have a firewall question, but it concerns routing to a linux box... :) My experience with firewalls is pretty limited - I'm used to the Home Network firewall/gateway boxes that have neat little http servers in them and forwarding ports to a web server behind said firewall is pretty straight forward - and darn it, if you have two web servers behind that little firewall, you have to run one on a different port. Now I'm dealing with a Cisco PIX 501. I have telnet access to it from inside the network it protects. I have a web server inside the network and it has an internal IP address of say 10.1.1.115 <http://10.1.1.115> the PIX has an internal and an external address. What I want to know is: If I had an extra external IP address and reserved it for the web server (and set up an A record using that IP and a really cool host name), could the PIX take traffic going to that extra IP and forward just traffic on port 80 to the web server at 10.1.1.115 <http://10.1.1.115> ? I would think this could be done as one would think that some folks have many many web servers behind a firewall that all run off port 80 .... I'm looking at the Command line interface guide for the PIX and it's thick.... :) just knowing this can be done will give me the courage to dive in!!! Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://shadowknight.real-time.com/pipermail/tclug-list/attachments/20050414/74a53815/attachment.html