Thanks again for your help. Joe >>> Dan Rue <drue at therub.org> 01/26/05 10:39AM >>> Ack sorry I completely forgot. Looking at my AP, I'm set to "AP Mode: Access Point". I have the linksys 802.11b wap only (no router stuff) - so your setup will be different. Here's an abbreviated diagram of my setup | | DSL Modem | OpenBSD Firewall | | 10.0.1.1/24 10.0.0.1/24 | | WAP 10.0.1.2 LAN | | DHCP 10.0.1.10-10.0.1.200 DHCP is handled by the firewall The WAP does nothing but "Access Point" - no dhcp, no NAT, no routing - it's all passed to the firewall. The WAP is a wireless hub. Hope that helps, dan On Wed, Jan 26, 2005 at 08:19:45AM -0600, Joe Stuart wrote: > Dan, > Sorry for bothering you, but did you happen to check your config of the > linksys router? > > Thanks > > >>> drue at therub.org 01/14/05 11:07AM >>> > I don't think it calls it bridge mode. I'll look at mine when I get > home. The thing you can't do with a wrt54g is set it up to bridge > another WAP. But the behavior you need is certainly possible. > > Again, i'll look tonight and let you know, > > dan > > On Thu, Jan 13, 2005 at 01:19:34PM -0600, John T. Hoffoss wrote: > > I've not used one, but a firmware upgrade *might* help there. Others > > will be more helpful in this area. > > > > > > On Thu, 13 Jan 2005 11:05:18 -0600 (CST), Garrett Krueger > > <gkrueger at cleosci.com> wrote: > > > You'll have to "admin" your way into the router, and you may have > to do > > > this by way of telnet. I know several of the router's web > interfaces do > > > not completely let you configure some of the options. > > > > > > Inside of the telnet screen there is probably some sort of "mode" > option > > > which will refer to bridge mode as "bridge mode" or "pass through > mode" or > > > something of that nature. > > > > > > > That makes sense thanks. The only problem I have is that I > cannot > > > > figure out how to turn the router into bridge mode. The model of > the > > > > router is wrt54g it's the 4-port switch, router, wap. The > linksys > > > > website has nothing that I can find on it. Found some > conversations on > > > > google groups, but it was only of people saying it couldnt be > done. > > > > > > > > > > > > > > _______________________________________________ > > > TCLUG Mailing List - Minneapolis/St. Paul, Minnesota > > > Help beta test TCLUG's potential new home: > http://plone.mn-linux.org > > > Got pictures for TCLUG? Beta test http://plone.mn-linux.org/gallery > > > > tclug-list at mn-linux.org > > > https://mailman.real-time.com/mailman/listinfo/tclug-list > > > > > > > > > -- > > John T. Hoffoss > > > > _______________________________________________ > > TCLUG Mailing List - Minneapolis/St. Paul, Minnesota > > Help beta test TCLUG's potential new home: http://plone.mn-linux.org > > > Got pictures for TCLUG? Beta test http://plone.mn-linux.org/gallery > > tclug-list at mn-linux.org > > https://mailman.real-time.com/mailman/listinfo/tclug-list > > _______________________________________________ > TCLUG Mailing List - Minneapolis/St. Paul, Minnesota > Help beta test TCLUG's potential new home: http://plone.mn-linux.org > Got pictures for TCLUG? Beta test http://plone.mn-linux.org/gallery > tclug-list at mn-linux.org > https://mailman.real-time.com/mailman/listinfo/tclug-list > > _______________________________________________ > TCLUG Mailing List - Minneapolis/St. Paul, Minnesota > tclug-list at mn-linux.org > http://mailman.mn-linux.org/mailman/listinfo/tclug-list