It looks like Gentoo supports the module as a package.

q root # emerge -s acx100
Searching...
[ Results for search key : acx100 ]
[ Applications found : 1 ]

* net-wireless/acx100 [ Masked ]
Latest version available: 0.2.0_pre8-r5
Latest version installed: [ Not Installed ]
Size of downloaded files: 275 kB
Homepage: http://acx100.sourceforge.net/
Description: Driver for the ACX100 and ACX111 wireless chipset (CardBus, 
PCI, USB driver disabled because it does not compile)
License: GPL-2 as-is


q root #


On 5/20/05, Richard Hoffbeck <rwh at visi.com> wrote:
> 
> The good news is that it is supported, but it looks like a lot of work
> to make it go. http://www.houseofcraig.net/acx100_howto.php has the
> details on drivers and configurations to use the ACX 111 chipset. They
> mention that it will work with ndiswrapper but they strongly recommend
> their driver instead. The project is at http://acx100.sourceforge.net/
> 
> --rick
> 
> >
> >
> > On 5/20/05, *Sam MacDonald* <smac at visi.com <mailto:smac at visi.com>> 
> wrote:
> >
> > From the lspci -v I get
> > Subsystem: Linksys: Unknown device 0033
> > From the lsmod I get
> > nothing...
> >
> > Sam.
> >
> [snip]
> 
> > 0000:06:00.0 Network controller: Texas Instruments ACX 111 54Mbps
> > Wireless Interface
> > Subsystem: Linksys: Unknown device 0033
> > Flags: bus master, medium devsel, latency 64, IRQ 11
> > Memory at 10c20000 (32-bit, non-prefetchable) [size=8K]
> > Memory at 10c00000 (32-bit, non-prefetchable) [size=128K]
> > Capabilities: <available only to root>
> >
> 
> 
> _______________________________________________
> TCLUG Mailing List - Minneapolis/St. Paul, Minnesota
> tclug-list at mn-linux.org
> http://mailman.mn-linux.org/mailman/listinfo/tclug-list
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://shadowknight.real-time.com/pipermail/tclug-list/attachments/20050520/def26b82/attachment.htm