On 4/22/07, Jon Schewe <jpschewe at mtu.net> wrote: > On Sun, 2007-04-22 at 13:09 -0500, Rob Terhaar wrote: > > On 4/22/07, Jon Schewe <jpschewe at mtu.net> wrote: > > > I'm hoping someone on the list has some experience with this or knows > > > where to look. > > > > > > I've got a tape recording where a tape player was used that clicks bad. > > > So the recording I want appears to be on the tape very quietly, however > > > the clicking is so loud because the internal mic on the recorder was > > > used. Does anyone have a good idea on how to remove these clicks? > > > > > > An example of the recording can be found at > > > http://mtu.net/~jpschewe/remove_clicks.flac > > > > > > Any help would be appreciated. The recording is of a memorial service > > > and I have someone that was unable to be there that I'd really like to > > > get a copy to. Thanks. > > > > > > > I can think of two ways to do this: > > > > method one: the cheap/free way (that might not work so well..) > > get a copy of audacity, isolate a block of the noise that you wish to > > eliminate. copy it onto a different track, and repeate the noise > > sample though out the entire recording. invert the noise sample track. > > line up the noise sample track so that the clicks are synchronized > > across the two tracks. this might or might not result with a sort of > > psuedo "active" noise cancelation of the clicks. > > > > What's a good way to repeat the section throughout the track? It is > happening at regular intervals, so that should make it easier. > bit difficult to explain via text, but you can copy/paste a section repeatedly as a 2nd track in audacity- if the click is happening at a regular interval, grab a complete single interval (with no vocals) and use the 'duplicate' feature. this should dump one cycle off to another track. if you then copy/paste this cycle, it should (hopefully) get close to lining up with each consecutive click in the main track. then comes the inversion of your noise track. like i said previously, there's a great chance that this may not work! :)