Is it possible that the device at the other end of the ethernet cable is dropping the ethernet link, and the Cisco 350AP link light is correctly indicating that the link is down at the device on other end of the cable? ----- Original Message ----- From: "Bob Tanner" <tanner at real-time.com> To: <tcwug-list at tcwug.org> Sent: Wednesday, July 21, 2004 11:22 PM Subject: [TCWUG] Dead fec0 (Ethernet) port on Cisco 350AP? > I got a Cisco 350AP and after about 30min of power the ethernet (fec0) port > looses it's link light. > > I've replaced the POE adapter, didn't help. > > I've tried multiple switches both Cisco and non-Cisco, both POE capable > switches and el-cheap-o switches. > > Multiple cables, all test good with a fluke. > > All the same result. Loss if link light. > > I've messed with the Speed setting. Nothing. > I've reset the box with the little paper-click-push-button. Nothing. > > I'd love to flash it, but the flash procedure fails everytime. > > Is there some more advanced diag stuff I can do? > > It posts and boots fine. Anything else I can try? > > -- > Bob Tanner <tanner at mn-linux.org> | Phone : (952)943-8700 > http://www.mn-linux.org, Minnesota, Linux | Fax : (952)943-8500 > Key fingerprint = AB15 0BDF BCDE 4369 5B42 1973 7CF1 A709 2CC1 B288 > > _______________________________________________ > Twin Cities Wireless Users Group Mailing List - Minneapolis/St. Paul, Minnesota > http://www.tcwug.org > tcwug-list at tcwug.org > https://mailman.real-time.com/mailman/listinfo/tcwug-list _______________________________________________ Twin Cities Wireless Users Group Mailing List - Minneapolis/St. Paul, Minnesota http://www.tcwug.org tcwug-list at tcwug.org https://mailman.real-time.com/mailman/listinfo/tcwug-list