We have a MAX 4060 7.0.4 connecting to our upstream who has a Cisco 5300 via 4 E1 channels (256k ISDN). They have a setting in their 5300 called "dialup idle timeout" which is set at 200,000 seconds. Even though this link wouldn't even have 1 second of idle time, as soon as the uptime on this link reaches 200,000 seconds the 5300 disconnects one of our channels. The link drops from 256k down to 192k and the link stops working until we manually drop the call. The upstream says we need to change one of the settings in our Max, but they don't know which one ???????? And we are not familiar with the 5300. They told me that there is a setting in the Cisco's called keep alive???? and asked me if our Max has a similar setting, which as far I know it does not. If anyone has any ideas on how we can stop the Cisco 5300 from thinking that our link is idle, when it is obviously not your help with this problem would be most appreciated. Cheers Craig Morgan Barneys Online Computers ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com To get FAQ'd: <http://www.nealis.net/ascend/faq>