"James Courtier-Dutton" <jcdutton at lucent.COM> wrote in message news:list.ascend-users#001701bff6f4$d742de00$1401a8c0 at home... > Hello > Which MAX model are you using? MAX 1800 > Please send me a dump of the routing table when the WAP phone is on. Eh, how can I do that? > See inline. idem. > > What you described is not exactly what I want (I think)... > > > > I have the following: > > * WAP phone > > * MAX router > > * RADIUS Server/WAP Gateway (this is one computer system with only one > > network card) > > > > The WAP phones are connecting to the MAX and are sending ip packeges only > to > > the WAP gateway. The WAP gateway is sending packages back to the WAP > phones > > so other network components don't need a route to the WAP phones (but it > is > > ok if they do, it really doesn't matter). > > > > I tried to following 3 configurations: > > > > - config 1, ip pool, this works! > IP pool same subnet as MAX, so using Proxy-Arp. Yep, proxy-arp is set to active (always doesn't work?) > > MAX = 195.43.39.114/27 (subnet mask = 255.255.255.224) > > RADIUS/Gateway = 195.43.39.115 (subnet mask = 255.255.255.224) > > IP pool = 195.43.39.105 to 195.43.39.108 > > > > In the connection profile is configured that a connecting WAP phone gets > an > > IP address from the pool. In the Ethernet options of the MAX > > (Ethernet/ModConfig/EthernetOptions) proxy mode is set to active. > > > > The RADIUS server is used to authenticate incoming calls. > > > > - config 2, no ip pool, this doesn't work! > > > > MAX = 195.43.39.114/27 (subnet mask = 255.255.255.224) > > RADIUS/Gateway = 195.43.39.115 (subnet mask = 255.255.255.224) > > RADIUS assign unique ip address to every connecting user, they are all in > > the pool: 195.43.39.105 to 195.43.39.108 > Should work with the correct Proxy-Arp setting. Set it to proxy-mode=always, > reboot might be needed. Ok, I just tried this (with rebooting the MAX) but it still doesn't work! So there must be something else wrong in the configuration here! > > > > In the connection profile the ip pool is turned off. I tried all proxy > > modes. I can see the the WAP phone is able to reach the gateway but the > MAX > > doesn't respons to ARP request from the gateway. > > Configuration 3 was something I tried because I didn't understand what was wrong in config 2. It's quite some work to change to this configuration so lets just leave this one alone. Config 2 is what I really want... Thanks, Eelco. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com To get FAQ'd: <http://www.nealis.net/ascend/faq>