Hello Which MAX model are you using? Please send me a dump of the routing table when the WAP phone is on. See inline. ----- Original Message ----- From: "Eelco Cramer" <eelco at xs4all.nl> To: <ascend-users at bungi.com> Sent: Wednesday, July 26, 2000 12:06 PM Subject: Re: (ASCEND) MAX 1800 ip routing problem > What you described is not exactly what I want (I think)... > > I have the following: > * WAP phone > * MAX router > * RADIUS Server/WAP Gateway (this is one computer system with only one > network card) > > The WAP phones are connecting to the MAX and are sending ip packeges only to > the WAP gateway. The WAP gateway is sending packages back to the WAP phones > so other network components don't need a route to the WAP phones (but it is > ok if they do, it really doesn't matter). > > I tried to following 3 configurations: > > - config 1, ip pool, this works! IP pool same subnet as MAX, so using Proxy-Arp. > > MAX = 195.43.39.114/27 (subnet mask = 255.255.255.224) > RADIUS/Gateway = 195.43.39.115 (subnet mask = 255.255.255.224) > IP pool = 195.43.39.105 to 195.43.39.108 > > In the connection profile is configured that a connecting WAP phone gets an > IP address from the pool. In the Ethernet options of the MAX > (Ethernet/ModConfig/EthernetOptions) proxy mode is set to active. > > The RADIUS server is used to authenticate incoming calls. > > - config 2, no ip pool, this doesn't work! > > MAX = 195.43.39.114/27 (subnet mask = 255.255.255.224) > RADIUS/Gateway = 195.43.39.115 (subnet mask = 255.255.255.224) > RADIUS assign unique ip address to every connecting user, they are all in > the pool: 195.43.39.105 to 195.43.39.108 Should work with the correct Proxy-Arp setting. Set it to proxy-mode=always, reboot might be needed. > > In the connection profile the ip pool is turned off. I tried all proxy > modes. I can see the the WAP phone is able to reach the gateway but the MAX > doesn't respons to ARP request from the gateway. > > - config 3, no ip pool, different subnet, this doesn't work! > > MAX = 195.43.39.114/27 (subnet mask = 255.255.255.224) > RADIUS/Gateway = 195.43.39.115 (subnet mask = 255.255.255.224) > RADIUS assign unique ip address to every connecting user, they are all in > the 10.0.0.* network > The RADUS/Gateway has a static route for the 10.0.0.* network to the MAX. Please send me a dump of the routing table when the WAP phone is on. Also the Radius entry used in text format. > > The WAP phones are able to reach the gateway but the MAX responds with > host-unreachable ICMPs to ip packeges send from the gateway back to the WAP > phone. > > --- > > Thanks a lot for your help, > > Eelco. > > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request at bungi.com > To get FAQ'd: <http://www.nealis.net/ascend/faq> ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com To get FAQ'd: <http://www.nealis.net/ascend/faq>