Thanks. That's what I needed. ----- Original Message ----- From: "Troy Settle" <troy at psknet.com> To: "Randy Smith" <ascend at lewiscounty.com>; <ascend-users at bungi.com> Sent: Wednesday, November 15, 2000 2:18 AM Subject: RE: (ASCEND) What is the difference between 7.0.1 loads? > > On ftp.ascend.com, in the /pub/Software-Releases/Max directory, you'll > find a file called upgrade-filenames.txt. In this file, you'll find a > description of what all those letters mean. > > - tbaxkh.m60 > > This load has appletalk support. Unless you're operating a > corporate network requiring appletalk support, you probably > don't need this. > > - tbck.m60 > > I believe this one has IP support, but no OSPF. > > - tbixkh.m60 > > This is the load that I use at 7.0.26. It works beautifully for me. > I've got several 4k and 6k boxes running for over a year on 7.0.22 > without issue: > > system.sysDescr.0 = Ascend Max-6000 T1/PRI & BRI S/N: 8401xxx > Software +7.0.22+ > system.sysUpTime.0 = Timeticks: (3834033500) 443 days, 18:05:35.00 > > system.sysDescr.0 = Ascend Max-HP T1/PRI S/N: 7361xxx Software > +7.0.22+ > system.sysUpTime.0 = Timeticks: (3610570800) 417 days, 21:21:48.00 > > My network environment requires the use of OSPF (I got sick of static > routes > long ago). If you've got more than a couple routers on your network, > I'd > reccomend that you go with this load and implement OSPF. > > - tck.m60 > > This is about the smallest load there is. I believe it has > IP suport, but no OSPF. Might be what you're looking for. > > > In the past, I've had Maxes spontaneously reboot, and the problem seemed > to be solved by completely wiping out the configuration, reloading the > firmware, then reconfiguring the box from scratch. > > > HTH, > > -- > Troy Settle > Pulaski Networks > 540.994.4254 > > It's always a long day, 86400 doesn't fit into a short. > > > > ** -----Original Message----- > ** From: owner-ascend-users at max.bungi.com > ** [mailto:owner-ascend-users at max.bungi.com]On Behalf Of Randy Smith > ** Sent: Tuesday, November 14, 2000 10:28 PM > ** To: ascend-users at bungi.com > ** Subject: (ASCEND) What is the difference between 7.0.1 loads? > ** > ** > ** I have a 6096 that was rebooting every 24 hours. Ascend had me load a > ** stripped down load (not tbaxkh.m60) a year or so ago and it > ** fixed the issue. > ** Last week I had a bad modem problem and they loaded a later > ** release 7.2.3 > ** (tbaxkh.m60) and ever since I've been rebooting again. I > ** need a stripped > ** down release that only does IP. Which should I use: > ** > ** tbaxkh.m60 (currently load and rebooting) > ** tbck.m60 (I think this is the one) > ** tbixkh.m60 > ** tck.m60 > ** > ** Thanks, > ** > ** Randy Smith > ** Tiger Mountain Technologies > ** > ** > ** ++ Ascend Users Mailing List ++ > ** To unsubscribe: send unsubscribe to > ** ascend-users-request at bungi.com > ** To get FAQ'd: <http://www.nealis.net/ascend/faq> > ** > ** > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request at bungi.com > To get FAQ'd: <http://www.nealis.net/ascend/faq> > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com To get FAQ'd: <http://www.nealis.net/ascend/faq>