----- Forwarded message from Tushar Patel ----- >From tushar Fri Feb 2 23:06:24 2001 Received: (from tushar at localhost) by ecpi.com (8.8.8/8.8.8) id XAA19624; Fri, 2 Feb 2001 23:06:23 -0600 (CST) From: Tushar Patel <tushar> Message-Id: <200102030506.XAA19624 at ecpi.com> Subject: pm3 and max with same radius ? To: ascend-users at bangi.com Date: Fri, 2 Feb 2001 23:06:22 -0600 (CST) Cc: tushar (Tushar Patel) X-Mailer: ELM [version 2.4ME+ PL38 (25)] Hi I recently purchased 3048, and I am trying to configure it and I have simple question. We have been using pm3 for while, and are usinf following radius entry for all users: DEFAULT Authentication-Type = UNIX-PW pppuser Authentication-Type = None Service-Type = Framed, Framed-Protocol = PPP, Framed-IP-Netmask = 255.255.255.0, Framed-Routing = None, Framed-MTU = 1500, Framed-Compression = Van-Jacobson-TCP-IP It worked fine for pm3. Now I am reading documents on how Ascend does Ip assignments It appears that I need to add following to assign Ip address from the pool Ascend-Assign-IP-Pool = 1, Since my radius does not have that define, how can I make it work with out adding that? Or it is must? If it is must then can some body suggest radius (preferable free) that can work with pm3 and Ascend. Thanks, Tushar ----- End of forwarded message from Tushar Patel ----- ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com To get FAQ'd: <http://www.nealis.net/ascend/faq>