Is there something special I need to do to make routes from the dial-up pool and static routes from RADIUS advertised via OSPF? We are running 7.2.x. I can see the OSPF neighbors and it is picking up routes from other routers fine but it doesn't seem to be advertising any routes. We have a single backbone area so one would think it should be straightforward. I put in static routes in our Cisco router right now but it's been pretty aggravating. Some of the settings follow: new ospf-area-range set area-network-addr = 192.168.58.9/26 set area-network-mask = 255.255.255.192 set advertize = yes new ip-global set pool-summary = yes set pool-ospf-adv-type = type-1 set ospf-pref = 10 set ospf-ase-pref = 150 set ospf-global as-boundary-router = no new ip-interface set interface-address physical-address shelf = shelf-1 set interface-address physical-address slot = slot-3 set interface-address physical-address item-number = 1 set ospf active = yes set ospf area = 0.0.0.0 set ospf area-type = normal set ospf ase-type = type-1 Thanks! Tim ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com To get FAQ'd: <http://www.nealis.net/ascend/faq>