Hi, try the ethernet settings full/half duplex and see what works best for you. and include you Ethernetswitch, set them to the same values as the TNT is configured to. full-duplex on both sides harcoded configured should work, all other stuff will fail. Bye >-----Original Message----- >From: owner-ascend-users at max.bungi.com >[mailto:owner-ascend-users at max.bungi.com]On Behalf Of Eric Larsen >Sent: Friday, July 06, 2001 9:13 AM >To: ascend-users at bungi.com >Subject: (ASCEND) high packet loss > > >I have approximately 120 connections running on a TNT through an >ethernet-2 >card on the 100M port. I am getting a high amount of packet loss. Is this >something on the network causing this, or is it on the TNT. Any >suggestions >on troubleshooting this problem? > >Eric Larsen >eric at istal.com > > >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request at bungi.com >Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/