Hi David, Do you use RADIUS? If so, you can create a user profile for 2 users that you want to have ip addresses statically assigned. Just take the ip addresses from the end of your TNT ip-pool and then decrement the count appropriately. Your TNT will route those 2 users just like anyone else dialing in and getting ip addresses from the pool(s). Just make sure that you disable "must-accept-address-assign" in ip-global. Do both of your TNT's use the same default gateway? If so, then this should solve your issue if I understand you correctly. Good Luck, David Pascarella, MCSE CCNA A+ Network Support Engineer SOLUNET, Inc. 1571 Robert J. Conlan Blvd., Suite 110 Palm Bay, FL 32905-3562 888.449.5766 800.795.2814 fax: 321.308.7986 mailto:dpascarella at solunet.com -----Original Message----- From: niblettda at gru.com [mailto:niblettda at gru.com] Sent: Tuesday, July 03, 2001 2:16 PM To: ascend-users at bungi.com Subject: (ASCEND) Two TNT with Static Dialup I have just added my second TNT server. I have two users that have static IP addresses and I have run into an obvious problem now. I can't route their IP addresses to a single TNT and expect that to work if they dial into the second TNT. I am hoping that someone has a solution that doesn't involve running a routing protocol other than static. I would prefer to stay away from doing that since all my pools work very nicely and I don't have to run OSPF or RIP or something to get peoples routes advertized. My thought was, could I say route the IP's to one of the TNT's and then on that TNT set up a static route to the other TNT for the same IP address? I'm hoping that the TNT's are like a Cisco where a directly connected interface will take over prescedence of a static IP route. I have also tried to route from my Cisco to the named Interface that the TNT's are connected to. This works some of the time, but not all of the time. Anyone have some experience with this, I would love to hear from you. Thanks! David A. Niblett ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/