Rob Ctl = Inc-W-200 and Clocking = Yes also might do the trick so that the local telco does the clocking. Do you have the signaling mode set to ISDN or Inband? If you have it set to Inband I believe you need to set it to ISDN. Hope this helps. ------- R. Hall NET-LINK Corp. Dennis Duval wrote: > > > company (SWBell) for the T1 settings, but only got Wink-Start, ESF, and > > B8ZS for info on how to setup my end. Ok fine. I do think there is other > > I have some maxen hooked up to SW Bell and a Erickson slave switch. I had > to set my maxen to Wink-Inc-200 to get it to work. Might try that instead > of Wink-Start. > / ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/