Do you have the number of ds0's set to 4 on both ends of the circuit? Or at least set the same? This sounds like what the problem might be. Keith Comer Network Support Specialist www.nwonline.net 419.334.9042 toll free: 888.644.6638 fax: 419.355.1157 -----Original Message----- From: owner-ascend-users at max.bungi.com [mailto:owner-ascend-users at max.bungi.com]On Behalf Of mick Sent: Friday, June 08, 2001 10:34 PM To: Mark Brody Cc: ascend-users at bungi.com Subject: Re: (ASCEND) Pipeline 130 T1 config help Are you getting TX packets but no RX packets? Could be call-type setting... On Fri, 8 Jun 2001, Mark Brody wrote: > I am trying to do a PPP T1 to a customer site. Here is what I have that is > not working. Looks like we have a WAN link but data moving across it. > > Side A (My Side) - Pipeline 220 > Ethernet/Static Routes/Default Route - 202.210.200.1 (our gateway) > Ethernet/Mod Config/Ether1/IP Addr - 202.210.200.186/24 > Ethernet/Connections/Cust001/IP Options/LAN Adrs - 202.210.202.106/30 > > Side B (Cust001) - Pipeline 130 > Ethernet/Static Routes/Default Route - 202.210.200.186 > Ethernet/Mod Config/Ether/IP Addr - 202.210.202.106/30 > Ethernet/Mod Config/Ether/2nd IP - 10.0.0.1 (for the internal side) > Ethernet/Connections/ISP/IP Options/LAN Adrs - 202.210.200.186 > > The connection seems to come up fine for one minute or so and then drops. At > no time can I actually route packets while it is up. On the Pipe 220, it > shows L1/LA nnnn........ (4 DS0's active). On the 130 at the cust site, it > show link active as well. > > Telco has run end-to-end tests and says the T is clear. > > Any ideas? > > Thanks, > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request at bungi.com > Archives: http://www.nexial.com/mailinglists/ > ***************************************** Mick Dobra Systems Administrator MTCO Communications 1-800-859-6826 ***************************************** ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/ ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/