I still having problems getting this to work the line is currently up and running with a PM3, I have a Max 4002 running 7.0.26 that was working with PRI service. The CT1 is ESF/B8ZS wink-start, I get the line to come up and I see incoming calls, it may be a call routing issue but for the life of me I can not make sense of the documentation. This is my profile now. (slot 6 is a 16 port 56k modem card) Is there any other config for the routing ???? x Line 1... x x L1/RA .......... x x L2/RA .......... x x Sig Mode=Inband ^x x 12345678901234 x x 12345678901234 x x NFAS ID num=N/A x x .............. x x .............. x x Rob Ctl=Wink-Start x lqqqqqqqqqqqqqqqqqqqqk lqqqqqqqqqqqqqqqqqqqqk x Switch Type=N/A x x90-100 Sessions ??x x00-200 10:43:38 ??x x Framing Mode=ESF x x> 0 Active x x>M31 Line 00 Ch 00 x x Encoding=B8ZS x x x x No Trunk Available x x FDL=None x x x x x x Length=N/A x lqqqqqqqqqqqqqqqqqqqqk lqqqqqqqqqqqqqqqqqqqqk x Buildout=0 dB x x90-300 WAN Stat ??x x90-400 Ether Stat ??x x Clock Source=Yes x x>Rx Pkt: 0^x x>Rx Pkt: 153869 x x Collect DNIS/ANI=No x x Tx Pkt: 0 x x Tx Pkt: 90017 x x Pbx Type=N/A x x CRC: 931vx x Col: 2 x x >Delete Digits=N/A x lqqqqqqqqqqqqqqqqqqqqk lqqqqqqqqqqqqqqqqqqqqk x Add Number=N/A x x00-100 Sys Option ??x xMain Status Menu ??x x Call-by-Call=N/A x T1-PRI:PRI # Type=Unknown x x .............. x x .............. x x T1-PRI:NumPlanID =ISDN x lqqqqqqqqqqqqqqqqqqqqk lqqqqqqqqqqqqqqqqqqqqk x Ans #=N/A x x90-100 Sessions ??x x00-200 10:43:38 ??x x Ans Service=N/A x x> 0 Active x x>M31 Line 00 Ch 00 x x Input Sample count=N/A x x x x No Trunk Available x x Send Disc=0 x x x x x x Overlap Receiving=N/A x lqqqqqqqqqqqqqqqqqqqqk lqqqqqqqqqqqqqqqqqqqqk x PRI Prefix #=N/A x x90-300 WAN Stat ??x x90-400 Ether Stat ??x x Trailing Digits=N/A x x>Rx Pkt: 0^x x>Rx Pkt: 154010 x x T302 Timer=N/A x x Tx Pkt: 0 x x Tx Pkt: 90206 x x Ch 1=Switched x x CRC: 931vx x Col: 2 x x Ch 1 #= x lqqqqqqqqqqqqqqqqqqqqk lqqqqqqqqqqqqqqqqqqqqk x Ch 1 Slot=6 x x00-100 Sys Option ??x xMain Status Menu ??x x Ch 1 Prt/Grp=0 vx x>Security Prof: 1 ^x x>00-000 System ^x Ch 1 TrnkGrp=N/A x x .............. x x .............. x x Ch 2=Switched x lqqqqqqqqqqqqqqqqqqqqk lqqqqqqqqqqqqqqqqqqqqk x Ch 2 #= x x90-100 Sessions ??x x00-200 10:43:38 ??x x Ch 2 Slot=6 x x> 0 Active x x>M31 Line 00 Ch 00 x x >Ch 2 Prt/Grp=0 x x x x No Trunk Available x x Ch 2 TrnkGrp=N/A x x x x x x Ch 3=Switched x lqqqqqqqqqqqqqqqqqqqqk lqqqqqqqqqqqqqqqqqqqqk x Ch 3 #= x x90-300 WAN Stat ??x x90-400 Ether Stat ??x x Ch 3 Slot=6 x x>Rx Pkt: 0^x x>Rx Pkt: 154076 x x Ch 3 Prt/Grp=0 x x Tx Pkt: 0 x x Tx Pkt: 90288 x x Ch 3 TrnkGrp=N/A x x CRC: 931vx x Col: 2 x ----- Original Message ----- From: "Roger Salisbury" <rogers at axs4u.net> To: "Ascend-Users at Max.Bungi.Com" <ascend-users at max.bungi.com> Sent: Tuesday, May 01, 2001 11:46 AM Subject: (ASCEND) CT1 headaches > We haveonly done PRI on the MAX's before but this are does not have ISDN > service. I am having a real tough time trying to get this to work. > > Could someone please share their setup?? > > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request at bungi.com > To get FAQ'd: <http://www.nealis.net/ascend/faq> > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request at bungi.com Archives: http://www.nexial.com/mailinglists/