[Ascend] Max1800 analog call refused

[Sven Woelk]

Hello,

i got a Ascend Max 1800 with a 8x 56k Modem Card (MX-SL-8Mod-S56) connected
via 2 bri lines.
Software-Release 7.2.4 is on the Max. ISDN dialin and Cellular Dialin is
possible. Whenever i try to dialin with any modem via a analog line, i cant
see the call in the session status window, and there´s no entry in the
syslog file.
I cant get access to the max via modem.
i use this config :

00-100
single answer = no
sub-adr=routing
serial=1
lan=2
dm=3
v110=4
use trunk grps=no
excl. routing=no

10-100
10-1** bri
switch type=net 3 ptp
bri analog encode = switchtype
line 1
    enabled=yes
    clock source=no
    d ch prt/grp=1 (0 is not possible) <-- for what is this option?
    b1 usage=switched
    b1 slot=0
    b1 prt/grp=0
    b1 trnkgrp=n/a
    b2 usage=switched
    b2 slot=0
    b2 prt/grp=0
    b2 trnkgrp=n/a
    pri num=<mynum>
    pri spid=n/a
    sec num=<same num as above (mynum)>

line 2
    absolut the same config

30-100
    modul name=k56-v90
    ans 1#=
    ans 2#=
    ans 3#=
    ans 4#=
    modem slot= enable slot
    modem #1=enable modem
    .... 1,2,3,4,7,8,11,12 is the same

50-700
    use answer as default=yes
    force 56=no
    profile reqd=yes
    id auth=ignore
    select clid=user prefer
    assign adrs=no
    framed only=no
        encaps
            all set to yes
        ppp options
            route ip = yes
            recv auth=either
            mru=1524
            lqm=yes
            lqm min=600
            lqm max=600
            link comp=stac
            vj comp=yes
            dyn alg=quadratic
            sec history=15
            add pers=5
            sub pers=10
            min ch count=1
            max ch count=2
            target util=70
            idle pct=0
            disc on auth=no

50-900
    dial plan=n/a
    ans 1#=
    ans 2#=
    ans 3#=
    ans 4#=
    pool start=<some ips>
    pool#1 count=30
    pool# name=1
    pool only=no
    pool summary=no
    pool chaining=no
    pool ospf adv type=n/a

            tserv options
                ts enabled=yes
                ppp=yes
                slip=no
                v42/mnp=will
                max baud=33600
                mdm trn level=-13
                mdm modulation=v.90
                cell first=no
                cell level=18
                telnet=no
                rlogin=no
                ....
                ppp delay=5
                ppp direct=yes
                7-even=no
                ppp-info=none
                silent=no
                modem dialout=yes
                immadiate=no
                packet wait time=0
                packet characters=0
                login timeout=300

    tcp-modem options
                tcp modem enabled=yes

    tcp-timeout=0



is there something wrong with my config? the router is in germany, net 3 ptp
works for isdn and cellular dialin.
only analog calls are refuesd. when i dialin via cellular handy, it says
voice call (can change this in the handy menu isdn/analog (its not a trick,
its a sony :) )

can someone help me?
i cant get working modem dialin.

regards
sven woelk